Items where Department / MOR is "Mechanical Engineering" and Year is 2011

Article

A.L., Tamiru and M. Hashim, Fakhruldin (2011) Fuzzy and LOLIMOT based Model Identification for the Steam and Cooling sections of a Cogeneration and District Cooling Plant. Journal of Applied Sciences . (Submitted)

Alemu Lemma, Tamiru and Fakhruldin , Bin Mohd Hashim and Chalilullah , Rangkuti (2011) Generating Gas Turbine Component Maps Relying on Partially Known Overall System Characteristics. Journal of Applied Sciences, 11 (11). pp. 1885-1894. ISSN 182-5654

Amir, A. and Mamat, O. (2011) A Review of Wear Mechanisms of Ceramic-Reinforced Metal-Matrix Composite: Case Study of Nano Silica Reinforced Iron. Defect and Diffusion Forum, 319. pp. 77-84.

Amir, Norlaili and Ahmad, Faiz and Megat-Yusoff, Puteri Sri Melor (2011) CHARACTERIZATION OF INORGANIC NON-METALLIC FIBRE REINFORCED EPOXY-BASED INTUMESCENT COATINGS (FRIC) AND CHARTEX 7. Engineering e-Transaction, 6 (2). pp. 136-144. ISSN 1823-6379

Ariatedja, J.B. and Mamat, O. (2011) A Semi-elliptical Crack Modeling and Fracture Constraint on Failure Diagram. Journal of Applied Sciences, 11 (11). pp. 2006-2011. ISSN 1812 5654

Atnaw, Samson Mekbib and Sulaiman, S. A. and Yusup, Suzana (2011) Downdraft Gasification of Oil-palm Fronds. Trends in Applied Sciences Research, 6 (9). pp. 1006-1018. ISSN 2151-7908

Baheta, Aklilu Tesfamichael and Gilani, Syed Ihtsham-ul-Haq (2011) Exergy based Performance Analysis of a Gas Turbine at Part Load Conditions. Journal of Applied Sciences. ISSN 1812-5654

Eltilib, R. AE. E. and Al-Kayiem, Hussain H. and Jaafar, Azuraien (2011) Investigation on the Particle Settling Velocity in Non-Newtonian Fluids. Journal of Applied Sciences, online. ISSN 18125654

Engida Woldemichael, Dereje and M Hashim, Fakhruldin (2011) A framework for function-based conceptual design support system. Journal of Engineering, Design and Technology, 9 (3). pp. 250-272. ISSN 1726-0531

Habib, Khairul (2011) Performance evaluation of combined adsorption refrigeration cycles. International Journal of Refrigeration.

Habib, Khairul (2011) Study on Solar Powered Combined Adsorption Refrigeration Cycles in Malaysia. 4th International Meeting of Advances in Thermofluids. pp. 1123-1134. ISSN 978-967-0194-07-3

Hassan, S. (2011) The Effects of Supercharging on the Performance and Exhaust Gas Emissions of a Dual-Fuel Engine Fueled with Producer Gas-Diesel and Palm Oil Blends. Middle-East Journal of Scientific Research, 7 (2). pp. 162-169. ISSN ISSN 1990-9233

Hassan, S. (2011) Effects of advanced injection timing on performance and emission of a supercharged dual-fuel diesel engine fueled by producer gas from downdraft gasifier. Journal of Scientific & Industrial Research, 70. pp. 220-224.

Hassan, S. (2011) Performance and Emission Characteristics of Supercharged Biomass Producer Gas-Diesel Dual Fuel Engine. Journal of Applied Sciences, 11 (9). pp. 1606-1611. ISSN 1812-5654

Iffa, Emishaw D. and Aziz, A. Rashid A. and Malik , Aamir Saeed (2011) Velocity Field Measurement of a Round Jet using Quantitative Schlieren. Applied Optics, 50 (5). pp. 618-625.

Kuppan Chetty , RM and Singaperumal, M and Nagarajan, T (2011) Coordination Control of Wheeled Mobile Robots - A Hybrid Approach. International Journal of Computer Applications in Technology(IJCAT), 41 (3/4). pp. 195-204. ISSN ISSN (Online): 1741-5047 - ISSN (Print): 0952-8091

M., Osman and T. , Nagarajan and Mohd Hashim, Fakhruldin (2011) Numerical Investigation of Pressure Drop in Hydraulic Spool Valve , ISSN . Journal of Solid State Science and Technology , 19 (2). pp. 48-60. ISSN 0128-7389

Mamat, O. and Ahmed, T. and Ariwahjoedi, B. (2011) Characterization and Properties of Copper-Silica Sand Nanoparticles Composites. Deffect and Diffusion Forum, 319-320. pp. 95-105.

Mamat, Othman and Oumer, A.N. (2011) Numerical simulation of fiber suspension in a two dimensional cavity. WORLD JOURNAL OF ENGINEERING, 8 (1). pp. 77-86. ISSN 1708-5284

Megat-Yusoff, Puteri Sri Melor and Abdul Latif, M.R. and Ramli, Mohd Shayuti (2011) Optimizing Injection Molding Processing Parameters for Enhanced Mechanical Performance of Oil Palm Empty Fruit Bunch High Density Polyethylene Composites. Journal of Applied Sciences. ISSN 1812-5654

Megat-Yusoff, Puteri Sri Melor and Abdul Latif, M.R. and Ramli, Mohd Shayuti (2011) Optimizing Injection Molding Processing Parameters for Enhanced Mechanical Performance of Oil Palm Empty Fruit Bunch High Density Polyethylene Composites. Journal of Applied Sciences, 11 (9). pp. 1618-1623. ISSN 1812-5654

Megat-Yusoff, Puteri Sri Melor and Ullah, Sami and Faiz , Ahmad and Azmi, Nurul Hazwani (2011) A Study of Bonding Mechanism of Expandable Graphite Based Intumescent Coating on Steel Substrate. Journal of Applied Sciences, 11 (9). pp. 1630-1635. ISSN 18125654

Mokhlif, N. D. and Al-Kayiem, Hussain H. (2011) Modeling of the Waxing-dewaxing Process in Scraped Surface Exchangers. Journal of Applied Sciences, online. ISSN 18125654

Mustapha, M. and Mustapha, F. and Mamat, O. and Hussain, P. (2011) Fabrication of aluminium foam through pressure assisted high frequency induction heated sintering dissolution process: an experimental observation. Powder Metallurgy, 54 (3). pp. 343-353. ISSN 1743-2901

Pradhan, M.K. and Biswas, C.K. (2011) Multi-response optimisation of EDM of AISI D2 tool steel using response surface methodology. International Journal of Machining and Machinability of Materials, 9 (1-2). pp. 66-85.

Pradhan, M.K. and Biswas, C.K. (2011) Response surface analysis of EDMed surfaces of AISI D2 steel. Advanced Materials Research, 264-26. pp. 1960-1965.

R , Devarajan and S, Mahendran and Abdul Karim, Z.A. and T, Nagarajan (2011) Design of Valveless Micropump using Preliminary Characteristics from Fluid Flow. Journal of Applied Sciences. ISSN 1812-5654

R.M. , Kuppan Chetty and M, Singaperumal and T, Nagarajan (2011) Distributed Formation Planning and Navigation Framework for Wheeled Mobile Robots. Journal of Applied Sciences. ISSN 18125654

S, Krishna and T, Nagarajan and A.M.A., Rani (2011) Review of Current Development of Pneumatic Artificial Muscle. Journal of Applied Sciences. ISSN 18125654

S, Jebaraj and S, Iniyan and R, Goic (2011) Forecasting of Coal Consumption Using an Artificial Neural Network and Comparison with Various Forecasting Techniques. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.

Sulaiman, S. A. and Hassan, A. H. (2011) A Study on the Impact of Operational Behavior on Cooling Energy in Highly-Glazed Academic Buildings in a Tropical Country. Trends in Applied Sciences Research, 6 (11). pp. 1256-1269. ISSN 1819-3579

T. , V. V. L. N. Rao and A. , M. A. Rani and T., Nagarajan and F. , M. Hashim (2011) ANALYSIS OF GROOVED JOURNAL BEARING WITH PARTIAL SLIP SURFACE. Engineering e-Transaction, 6 (2). pp. 183-190. ISSN 1823-6379

Vu, Trieu Minh (2011) FAULT DETECTION MODEL-BASED CONTROLLER FOR PROCESS SYSTEMS. ASIAN JOURNAL OF CONTROL, 13 (3). pp. 382-397. ISSN 1561-8625

Vu, Trieu Minh (2011) Stability for switched dynamic hybrid systems. Mathematical and Computer Modelling, 54 (12). pp. 112-119. ISSN 08957177

Vu, Trieu Minh (2011) Time Forward Observer Based Adaptive Controller for a Teleoperation System. INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS, 9 (3). pp. 470-477. ISSN 1598-6446

Vu, Trieu Minh (2011) Tracking setpoint robust model predictive control for input saturated and softened state constraints. INTERNATIONAL JOURNAL OF CONTROL, AUTOMATION AND SYSTEMS, 9 (5). pp. 958-965. ISSN 15986446

Woldemichael Engida , Dereje and Fakhruldin , Mohd Hashim and Sujan , Debnath (2011) A Knowledge-Based Conceptual Design Support System. Advanced Materials Research , 308 - 310. pp. 1540-1545.

Wong, Dennis ML and Pao, William (2011) A genetic algorithm for optimizing gravity die casting’s heat transfer coefficients. Expert Systems with Applications, 38 (6). pp. 7076-7080. ISSN 09574174

Book Section

A.L., Tamiru and M. Hashim, Fakhruldin (2011) Application of Bat Algorithm and Fuzzy Systems to Model Exergy Changes in a Gas Turbine. In: Artificial Intelligence, Evolutionary Computation and Metaheuristics (AIECM). Springer. (Submitted)

A.L., Tamiru and M. Hashim, Fakhruldin (2011) A Hybrid Approach to Fault Detection and Diagnosis in an Industrial Gas Turbine. In: Computational Intelligence in Multi-Agent Systems: Theory and Practice. IGI Global. (Submitted)

A.L. , Tamiru and M. Hashim, Fakhruldin (2011) A Critical Review on Fault Detection and Diagnosis Systems related to Cogeneration and Cooling Plants. In: Computational Intelligence in Multi-Agent Systems: Theory and Practice. IGI Global. (Submitted)

Sulaiman, S. A. and A Majid, M Amin (2011) Overview of Gas District Cooling in Malaysia. In: Gas District Cooling in Malaysia. Lambert Academic Publishing, Saarbrücken, Germany, pp. 19-40.

Sulaiman, S. A. and A Majid, M Amin and Aris, M.S. (2011) Introduction. In: Gas District Cooling in Malaysia. Lambert Academic Publishing, Saarbrücken, Germany. ISBN 978-3-8465-5441-8

Vu, Trieu Minh (2011) CONTROL AND OPTIMIZAITON OF LINEAR SYSTEMS. In: PROCEEDINGS OF THE FOURTH GLOBAL CONFERENCE ON POWER CONTROL AND. AIP Conference Proceedings, 1337 (BVL72). AMER INST PHYSICS, 2 HUNTINGTON QUADRANGLE, STE 1NO1, MELVILLE, NY 11747-4501 USA, 2 HUNTINGTON QUADRANGLE, STE 1NO1, MELVILLE, NY 11747-4501 USA, pp. 108-112. ISBN 978-0-7354-0893-7

Conference or Workshop Item

A Majid, M Amin and Nasir Rashid, Meseret (2011) Multi-State Availability and Reliability Assessment of Electric Chillers of a District Cooling Plant. In: 2011 IEEE Colloquim on Humanities, Science and Engineering Research, 5-6 December 2011, Penang, Malaysia.

A Majid, M Amin and Nasir Rashid, Meseret and Waluyo, Joko (2011) Operation and Performance of a Thermal Energy Storage System: A Case Study of Campus Cooling using Cogeneration Plant. In: 2nd International Conference on Advances in Energy Engineering, 26th to 28th Dec 2011, Bangkok, Thailand.

Abdullah, Mohamad Zaki and Megat Yusoff, Puteri S. M. and Mat Shayuti, Muhammad S. (2011) Compressive Properties and Morphology of Polypropylene/Polycarbonate Blends. In: 2011 International Conference on Environment and Industrial Innovation, 17-19 June, 2011, Kuala Lumpur.

Aja, Ogboo Chikere and Al-Kayiem, Hussain H. and Abdul Karim, Z. A. (2011) CFD Simulation and Analysis of Thermal Diffuser for High Temperature Flue Gases. In: International Renewable Energy and Environment Conference (IREEC 2011), 24 26 June 2011, Kuala Lumpur, Malaysia .

Aja, Ogboo Chikere and Al-Kayiem, Hussain H. and Abdul Karim, Z. A. (2011) Thermal Field Study and Analysis in Hybrid Solar Flue Gas Chimney Power Plant. In: National Postgraduate Conference 2011 (NPC 2011), 19-20 Sept 2011, Universiti Teknologi PETRONAS, Tronoh, Perak, MALAYSIA.

Aja, Ogboo Chikere and Amin, Nowshad and Alghoul, Mohammad A. and Al-Kayiem, Hussain H. (2011) Design of an Intelligent Dual-axis Solar Tracking Device for Solar System Usage. In: Curtin University of Technology Science and Engineering International Conference (CUTSE), 8th to 9th November 2011, Miri Sarawak, Malaysia.

Aja, Ogboo Chikere and Amin, Nowshad and Alghoul, Mohammad A. and Al-Kayiem, Hussain H. (2011) Design of an Intelligent Dual-axis Solar Tracking Device for Solar System Usage. In: 3rd CUTSE2011 International Conference on Innovative Green Technology for Sustainable Development, 8th – 9th November 2011, Miri, Sarawak, Malaysia.

Alemu Lemma, Tamiru and Mohd Hashim, Fakhruldin (2011) Wavelet Neural Network based Fault Detection and Diagnosis in an Industrial Gas Turbine. In: 3rd CUTSE2011 International Conference on Innovative Green Technology for Sustainable Development, 8th – 9th November 2011, Miri, Sarawak, Malaysia.

Alemu Lemma, Tamiru and Mohd Hashim, Fakhruldin (2011) Fuzzy Systems and Bat Algorithm for Exergy Modeling in a Gas Turbine Generator. In: IEEE Colloquium on Humanities, Science and Engineering Research, 5-6 December, Penang.

Alemu Lemma, Tamiru and Mohd Hashim, Fakhruldin (2011) A New Optimization Algorithm based on Copulation Behavior of Simine Jackals. In: 3rd CUTSE2011 International Conference on Innovative Green Technology for Sustainable Development, 8th – 9th November 2011, Miri, Sarawak, Malaysia.

Alemu Lemma, Tamiru and Mohd Hashim, Fakhruldin (2011) Normalized Radial Basis Function Networks Applied to Exergy, NOx, and Creep Life Prediction in an Industrial Gas Turbine. In: 3rd CUTSE International Conference On Innovative Green Technology for Sustainable Development, 8-9 November 2011, Miri, Sarawak, Malaysia.

Amir, Norlaili and Ahmad, Faiz and Megat-Yusoff, Puteri Sri Melor (2011) CHARACTERIZATION OF INORGANIC NON-METALLIC FIBRE REINFORCED EPOXY-BASED INTUMESCENT COATINGS AND CHARTEX 7 EXPOSED TO HIGH TEMPERATURE. In: Regional Tribology Conference, 22-24 November 2011, Bayview Hotel, Langkawi Island, Malaysia.

Atnaw, Samson Mekbib and Sulaiman, S. A. and Moni, M. N. Z. (2011) Experimental Study on Temperature Profile of Fixed – Bed Gasification of Oil- Palm Fronds. In: 4th International Meeting on Advances in Thermofluids (IMAT), Melaka.

Atnaw, Samson Mekbib and Sulaiman, S. A. and Yusup, Suzana (2011) Prediction of Calorific Value of Syngas Produced from Oil-Palm Fronds Gasification. In: 3rd National Postgraduate Conference, Tronoh.

Azmi Md Haniffa, Mohamad and Mohd Hashim , Fakhruldin (2011) Review of Hydrate Prevention Methods for Deepwater Pipelines. In: IEEE Conference on Open Systems (ICOS2011), 25 - 28 Sept., 2011, Langkawi, Malaysia,.

Azmi Md Haniffa, Mohamad and Mohd Hashim, Fakhruldin (2011) Recent Developments in In-Line Inspection Tools (ILI) For Deepwater Pipeline Applications. In: 3rd National Postgraduate Conference(NPC2011), 19 -20 Sept., 2011, Universiti Teknologi PETRONAS, Bandar Seri Iskandar,Tronoh, Perak, Malaysia.

Elneel, R. and Sulaiman, S. A. and Ariwahjoedi, B. (2011) Feasibility Study of Gasification Oil Palm Fronds in an Updraft Gasifier. In: The 4th International Meeting of Advances in Thermofluids, Melaka.

Ghazali, Zulkipli and A Majid, M Amin and Fun How, Hong (2011) Engineering Economic Analysis for Waste Heat Boilers: a Case of an Integrated Petrochemical Complex in Malaysia. In: 2011 IEEE Colloquium on Humanities, Science and Engineering Research, CHUSER 2011, 5-6 December 2011, Penang, Malaysia.

Ghazali, Zulkipli and A Majid, M Amin and Mustafa, Mohd Norhisham (2011) Contractors Selection Based on Multi-Criteria Decision Analysis. In: 2011IEEE Colloquium on Humanities, Science and Engineering Research, CHUSER 2011, 5-6 December 2011, Penang, Malaysia.

Guangul, F. M. and Sulaiman, S. A. and Raghavan, V. R. (2011) Elemental and Thermo-Chemical Analysis of Oil Palm Fronds for Biomass Energy Conversion. In: 4th International Meeting on Advances in Thermofluids (IMAT), Melaka.

Guangul, F. M. and Sulaiman, S. A. and Raghavan, V. R. (2011) Gasification and Effect of Gasifying Temperature on Syngas Quality and Tar Generation. In: 4th International Meeting on Advances in Thermofluids (IMAT), Melaka.

Kuppan Chetty , RM and M, Singaperumal and T., Nagarajan (2011) Distributed planning and control of multirobot formations with navigation and obstacle avoidance. In: Recent Advances in Intelligent Computational Systems (RAICS), 2011 IEEE , Digital Object Identifier: 10.1109/RAICS.2011.6069385 .

M. , Osman and T., Nagarajan and Mohd Hashim, Fakhruldin (2011) Numerical Study of Flow Field and Energy Loss in Hydraulic Proportional Control Valve. In: National Postgraduate conference NPC2011, September 19-20, 2011, UTP, Seri Iskandar, Perak, Malaysia.

Mahgoub, B. K. M. and Sulaiman, S. A. and Abdul Karim, Z. A. (2011) Emission of a Compression Ignition Engine Fuelled by Diesel and Imitated Syngas. In: 4th International Meeting on Advances in Thermofluids (IMAT), Melaka.

Megat-Yusoff, Puteri Sri Melor and Abdul Latif, M.R. and Ramli, Mohd Shayuti (2011) Optimizing Injection Molding Processing Parameters for Enhanced Mechanical Performance of Oil Palm Empty Fruit Bunch High Density Polyethylene Composites. In: International Conference on Plant Equipment and Reliability (ICPER 2010), Kuala Lumpur, Malaysia , 15-17 June 2010, Kuala Lumpur, Malaysia.

Muhammad, Masdi and Mokhtar, Ainul Akmar and A Majid, M Amin (2011) Reliability Assessment of Multi-State Repairable System Subject to Minimal Repairs and Constant Demand. In: 2011 IEEE Colloquium on Humanities, Science and Engineering Research, 5-6 December 2011, Penang, Malaysia.

Mukhlif, Nassir D. and Al-Kayiem, Hussain H. and Baharom, Masri B (2011) Modeling of Wax Crystallization in Production of Lube Oil Base Stock in Solvent Dewaxing. In: National Postgraduate Conference 2011 (NPC 2011), 19-20 Sept 2011, Universiti Teknologi PETRONAS, Tronoh, Perak, MALAYSIA.

Oseghale, Sunday Dalton and Aja, Ogboo Chikere (2011) Towards a Cleaner Environment: A study on the Potential Utilization of Solid Waste as Fertilizer and Energy Sources in Malaysia. In: 3rd CUTSE2011 International Conference on Innovative Green Technology for Sustainable Development, 8th – 9th November 2011, Miri, Sarawak, Malaysia.

Purbawanto Hidayat, Mas Irfan and Megat-Yusoff, Puteri Sri Melor and Berata, Wajan (2011) Neural Networks with NARX Structure for Material Lifetime Assessment Application. In: IEEE Symposium on Computers and Informatics, 20 to 22nd March 2011, Kuala Lumpur. (Submitted)

Riza, R and Ariwahjoedi, B. and Sulaiman, S. A. (2011) Preliminary Study of the Zero-Dimensional Climate Modeling by Using Numerical Method. In: 3rd National Postgraduate Conference, Tronoh.

Shiraz, Mohd. Aris and Syed Ihtsham-ul-Haq, Gilani and Dimas, F.A (2011) hourly solar radiation estimation from limited meteorological data to complete nissing solar radiation data. In: 2011 International Conference on Environment Science and Engineering, 2011, IACSIT Press, Singapore.

Sulaiman, S. A. and Atnaw, S. M. and Moni, M. N. Z. (2011) A Preliminary Study of Oil Palm Fronds for Gasification Process. In: Power and Energy Systems (EuroPES 2011), 22-24 June 2011, Crete, Greece.

Sulaiman, S. A. and Ahmad, M. R. T. and Atnaw, Samson Mekbib (2011) Prediction of Biomass Conversion Process for Oil Palm Fronds in a Downdraft Gasifier. In: 4th International Meeting on Advances in Thermofluids (IMAT), Melaka.

Sulaiman, S. A. and Rashid, M. S. A. and Hassan, A. H. (2011) Manipulation of Operating Configuration of Cool Air Supply in Buildings for Reduction of Cooling Energy. In: 4th International Meeting on Advances in Thermofluids (IMAT), Melaka.

Sulaiman, S. A. and Romli, R. (2011) Combustion Performance of Various Cellulosic Biomasses in a Gasifier-Based Cookstove. In: 4th International Meeting on Advances in Thermofluids (IMAT), Melaka.

Sulaiman, S. A. and Tamby, F. H. and Aris, M.S. (2011) Study on Pre-Occupancy Purging of Air for a Low Occupancy Office in a Tropical Country. In: 2nd International Conference on Advances in Energy Engineering (ICAEE 2011), 27-28 December 2011, Bangkok.

T., V. V. L. N. Rao and A., M. A. Rani and T., Nagarajan and F., M. Hashim (2011) Analysis of Grooved Journal Bearing With Partial Slip Surface. In: Regional Tribology Conference (RTC) 2011, November 22-24, 2011, Langkawi, Malaysia.

T. , V. V. L. N. Rao and A. , M. A. Rani and T. , Nagarajan and F. , M. Hashim (2011) Analysis of Partially Textured Slider and Journal Bearing. In: 4th International Meeting of Advances in Thermofluids (IMAT) 2011, October 3-4, 2011, Melaka, Malaysia.

Ullah, Sami and Faiz, Ahmad and Puteri , Sri Melor Bt Megat Yusoff (2011) The effect on Expansion and Thermal degradation of 63um Expandable Graphite on Intumescent fire retardant coating composition. In: 5th INTERNATIONAL CONGRESS OF CHEMISTRY AND ENVIRONMENT (ICCE-2011) AT MALAYSI, 27-29 May 2011, Port Dickson Malaysia.

Ullah, Sami and Faiz , Ahmad and Puteri , Sri Melor Bt Megat Yusoff (2011) Enhancing the Char Strength of Expandable Graphite Based Intumescent Fire Retardant Coatings by using Multi wall Carbon Nano Tubes for Structural Steel. In: International Conference on Materials for Advanced Technologies (ICMAT 2011), 26 June to 1 July 2011, Suntec Singapore. (Submitted)

Victor , Amirtham and T. , Nagarajan and Bin Mohd Hashim, Fakhruldin (2011) Wrist Motion Analysis Using SMA Actuation. In: CUTSE International Conference, 8-9 Nov, 2011 , Miri, Sarawak, Malaysia .

Book

Nugroho, Gunawan and A.M.S., Ali and Abdul Karim, Z. A. (2011) The Navier-Stokes Equations: On Special Classes and Properties of Exact Solutions of 3D Incompressible Flows. LAP LAMBERT Academic Publishing, Germany. ISBN 978-3838376943

Sulaiman, S. A. and A Majid, M Amin (2011) Gas District Cooling in Malaysia. Lambert Academic Publishing, Saarbrücken, Germany. ISBN 978-3-8465-5441-8

Citation Index Journal

Abd Majid, Mohd Amin and Nasir Rashid, Meseret (2011) Multi-state System Availability Model of Electricity Generation for a Cogeneration District Cooling Plant. [Citation Index Journal]

Abdul Karim, Z. A. and Yongo A., Philip Waden (2011) Analytical Models for Energy Audit of Cogeneration Plant. [Citation Index Journal]

Amir, Norlaili and Ahmad, Faiz and Megat-Yusoff, P.S.M. (2011) Study on the Fibre Reinforced Epoxy-based Intumescent Coating Formulations and their Char Characteristics. [Citation Index Journal]

Aris, M.S. and McGlen, R.J. and Owen, I (2011) An Experimental Investigation into the Deployment of 3D, Finned Wing and Shape Memory Alloy Vortex Generators in a Forced Air Convection Heat Pipe Fin Stack. [Citation Index Journal] (In Press)

Aris, M.S. and Owen, I and Sutcliffe, C.J. (2011) The Development of Active Vortex Generators from Shape Memory Alloys for the Convective Cooling of Heated Surfaces. [Citation Index Journal]

Aris, M.S. and Owen, I and Sutcliffe, C.J. (2011) The development of active alloy vortex generators from shape memory alloys for the convective cooling of heated surfaces. [Citation Index Journal]

Awang, Mokhtar and Ahmat, Iffatun and Hussain, Patthi (2011) Experience on Friction Stir Welding and Friction Stir Spot Welding at Universiti Teknologi Pertonas. [Citation Index Journal]

Belachew , Chanyalew Taye and Che Ismail, Mokhtar and Karuppanan , S (2011) Burst Strength Analysis of Corroded Pipelines by Finite Element Method. [Citation Index Journal]

Firmanto, H. and Hussain, P. and Mamat, O. (2011) Reaction Layers of the Diffusion-Bonded Sialon and High-Chromium Steel. [Citation Index Journal]

G. , Satheesh Kumar and T. , Nagarajan (2011) Reconfigurable Stewart Platform for Spiral Contours. [Citation Index Journal]

Gilani, Syed Ihtsham-ul-Haq and Dimas, Firmanda Al Riza and Shiraz, Mohd. Aris (2011) Hourly Solar Radiation Estimation Using Ambient Temperature and Relative Humidity Data. [Citation Index Journal]

Hassan, Cik Suhana and Hussain, Patthi and Awang, Mokhtar (2011) Stress Analysis on Direct Joining of Sailon to AISI 430 Ferritic Stainless Steel. [Citation Index Journal]

Joko , Joko and A Majid, M Amin (2011) Performance Evaluation of Stratified TES using Sigmoid Dose Response Function. [Citation Index Journal]

Khoo, Sze Wer and Karuppanan , S (2011) Stress Intensity Factor for Cracks Emanating from a Shaft. [Citation Index Journal]

M. Rafi Raza, Rafi and Faiz Ahmad , Faiz and N.Ikram, Nazma and R.Ahmad, Rafiq and A.salam, Salam (2011) Development and Working and Heat treatment strengthening of 2219 Aluminum alloy by mechanical working. [Citation Index Journal]

Mohammadpour, Ehsan and Mokhtar, Awang (2011) Predicting the nonlinear tensile behavior of carbon nanotubesusing finite element simulation. [Citation Index Journal]

Muhammad, Masdi and Abd Majid, M Amin (2011) Reliability and Availability Evaluation for a Multi-state System Subject to Minimal Repair. [Citation Index Journal]

Nasir Rashid, Meseret and Abd Majid, Mohd Amin (2011) A Multi-state Reliability Model for a Gas Fueled Cogenerated Power Plant. [Citation Index Journal]

Oumer, AN and Ali, A.M.S. and Mamat, O (2011) Numerical simulation of fiber suspension in a two dimensional cavity. [Citation Index Journal]

Riza, R and Ariwahjoedi, B. and Sulaiman, S. A. (2011) On the Numerical Exploration of Zero-Dimensional Greenhouse Model using Newton-Raphson and Steepest Descent Methods. [Citation Index Journal]

S.A., Sulaiman and Hussain, Haizatul H. and Leh, N. S. H. N. and Razali, M. S. I. (2011) Effects of Dust on the Performance of PV Panels. [Citation Index Journal]

Sulaiman, S. A. and Hussain, Haizatul H. and Leh, N. S. H. N. and Razali, M. S. I. (2011) Effects of Dust on the Performance of PV Panels. [Citation Index Journal]

Sulaiman, S. A. and Minhat, M. (2011) Development of a Spark Electrode Ignition System for an Explosion Vessel. [Citation Index Journal]

Ullah, Sami and Faiz , Ahmad and Puteri, Puteri Sri Melor Bt Megat Yusoff (2011) Study of bonding mechanism of expandable graphite based intumescent coating. [Citation Index Journal]

Vu, Trieu Minh (2011) Development of a real-time clutch transition strategy for a parallel hybrid electric vehicle. [Citation Index Journal]

Vu, Trieu Minh and Mokhtar, Awang and Setyamartana, Parman (2011) Conditions for Stabilizability of Linear Switched Systems. [Citation Index Journal]

Waluyo, Joko and Abd Majid, Mohd Amin (2011) Performance Evaluation of Stratified TES using Sigmoid Dose Response Function. [Citation Index Journal]

Woldeyohannes, Abraham D. and A. Majid, Mohd Amin (2011) Effect of age of Pipes on Performance of Natural Gas Transmission Pipeline Network System. [Citation Index Journal]

Woldeyohannes, Abraham D. and Abd Majid, Mohd Amin (2011) Effects of Age of pipes on Performance of Natural Gas Transmission Pipeline Network System. [Citation Index Journal]