Browse by Type

Group by: Creators | Item Type | No Grouping

Jump to: | . | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | Y | Z

Number of items: 1048.

khalaji assadi, morteza (2016) Fabrication of SWCNT/TiO2 for Creating Self-Cleaning Property on the Glass. INTERNATIONAL JOURNAL of RENEWABLE ENERGY RESEARCH, 6 (4).

Hanaei, Hengameh and KhalajiAssadi, Morteza (2016) Highlyefficient antireflectiveandself-cleaningcoatings that incorporatecarbonnanotubes(CNTs)intosolarcells:Areview. Renewable and Sustainable Energy Reviews, 58. pp. 620-635. ISSN 1364-0321

Khalaji Assadi, M and Gilani, S. I and Jun Yen, T. C (2016) DESIGN a solar hybrid air conditioning compressor system. MATEC Web of Conferences, 38.

Khalaji Assadi , Morteza and Mohammadi, Ali (2016) Simulation of dynamical performance of solar desiccant cooling cycle. Applied Mechanics and Materials, 819. pp. 160-170. ISSN 1662-7482

Ismaeel, Ali A. and Al-Kayeim, Hussain H. and Baheta, Aklilu T. (2016) Comparative Critique of Thermal Energy storage Technique in Solar Chimney Power Plant. International Energy Journal.

Khalaji Assadi, Morteza (2016) Integration of Computer Simulation, Design of Experiments and Particle Swarm Optimization to Optimize the Production Line Efficiency. International Journal of Swarm Intelligence and Evolutionary Computation.

Khalaji Assadi, M (2016) Application of Artificial Intelligence Methods for Hybrid Energy System Optimization. Renewable and Sustainable Energy Reviews, 66. pp. 617-630. ISSN 1364-0321

.

., N Rini, VJ Kurian, MS Liew, A Whyte (2016) Coupled analysis for the effect of wave height on FPSO motions. Coupled analysis for the effect of wave height on FPSO motions. (Submitted)

., Ezerie Henry Ezechi, Shamsul Rahman bin Mohamed Kutty, Mohamed H (2016) Application of response surface methodology for the optimization of hexavalent chromium removal using a new low-cost adsorbent. Application of response surface methodology for the optimization of hexavalent chromium removal using a new low-cost adsorbent. (Submitted)

., AH Abdul Latiff, SAA Osman, SNF Jamaludin (2016) Seismic Data Analysis to the Converted Wave Acquisition: A Case Study in Offshore Malaysia. Seismic Data Analysis to the Converted Wave Acquisition: A Case Study in Offshore Malaysia.

., Abdul Halim Abdul Latiff, Siti Nur Fathiyah Jamaludin, Muhammad (2016) Post-stack seismic data enhancement of thrust-belt area, Sabah basin. Post-stack seismic data enhancement of thrust-belt area, Sabah basin.

., Edwar Yazid, Mohd Shahir Liew, Setyamartana Parman, Velluruzhati (2016) Identification of transfer functions from surge motion response of a semisubmersible platform using time-varying NARX model. Identification of transfer functions from surge motion response of a semisubmersible platform using time-varying NARX model. (Submitted)

., Nurul Mu’azzah Abdul Latiff NikNoordini, NikAbdMalik Abdul Halim (2016) A Green Clustering Protocol for Mobile Sensor Network Using Particle Swarm Optimization. A Green Clustering Protocol for Mobile Sensor Network Using Particle Swarm Optimization.

A

Ayman N Qadrouh, José M Carcione, Ahmed MA Salim, Zuhar Zahir Tu, . (2016) Seismic spectrograms of an anelastic layer with different source-receivers configurations. Seismic spectrograms of an anelastic layer with different source-receivers configurations.

Ali Wahid, Ahmed Mohamed Ahmed Salim, Gamal Ragab Gaafar, Wan Is, . (2016) The geostatistical approach for structural and stratigraphic framework analysis of offshore NW Bonaparte Basin, Australia. The geostatistical approach for structural and stratigraphic framework analysis of offshore NW Bonaparte Basin, Australia.

Abdul Latiff, Abdul Halim (2016) Shallow gas cloud illumination analysis by the focal beam method. Shallow gas cloud illumination analysis by the focal beam method.

Aleem, Waqas and Mellon, Nurhayati (2016) Experimental study on the effect of parameters on sedimentation and coalescing profiles in liquid-liquid batch settler. Procedia engineering, 148. pp. 887-895.

Abidin, Mardhati Zainal and Rusli, Risza and Shariff, Azmi Mohd and Khan, Faisal Irshad (2016) Three-stage ISD matrix (TIM) tool to review the impact of inherently safer design implementation. Process Safety and Environmental Protection, 99. pp. 30-42.

Ab Kadir, Noor Ain and Rusli, Risza and Buang, Azizul and Rahim, Nur Shamimi Abdul (2016) Investigation of the explosion behaviour affected by the changes of particle size. Procedia engineering, 148. pp. 1156-1161.

Ahmad, Ishaq and Awang, Mariyamni and Sufian, Suriati and Irfan Khan, M and Mumtazb, M (2016) Effect of ball milling of fly ash particle size on foam stabilization for EOR applications. Jurnal Teknologi, 78 (6-7). pp. 115-119.

Abd Wahab, Nur Wasimah and Sufian, Suriati and Van, Thien Duc Nguyen and Shaharun, Maizatul Shima (2016) Comparative Studies of Pristine and Functionalized CNFs Surface Properties and their Performance in Iron Distribution. Procedia Engineering, 148. pp. 136-145.

Abunowara, Mustafa and Bustam, Mohamad Azmi and Sufian, Suriati and Eldemerdash, Usama (2016) Description of carbon dioxide adsorption and desorption onto Malaysian coals under subcritical condition. Procedia engineering, 148. pp. 600-608.

Ali, Wan Nadatul Nadwa Wan and Sufian, Suriati and Abdullah, Mohd Zamri (2016) Green functionalization: comparison of different carbonaceous materials. Procedia engineering, 148. pp. 795-805.

Abidin, Mardhati Zainal and Rusli, Risza and Buang, Azizul and Shariff, Azmi Mohd and Khan, Faisal Irshad (2016) Resolving inherent safety conflict using quantitative and qualitative technique. Journal of Loss Prevention in the Process Industries, 44. pp. 95-111.

Abidin, Mardhati Zainal and Rusli, Risza and Shariff, Azmi Mohd (2016) Technique for Order Performance by Similarity to Ideal Solution (TOPSIS)-entropy methodology for inherent safety design decision making tool. Procedia Engineering, 148. pp. 1043-1050.

Azahari, Mohd Ikmal Hisham and Zabiri, Haslinda and Isa, Faezah and Tuffa, Lemma Dendana and Shariff, Azmi Mohd (2016) CO2 absorption from natural gas: dynamic study & simulation. Procedia engineering, 148. pp. 941-948.

Ahmad, NNR and Mukhtar, H and Mohshim, DF and Nasir, R and Man, Z (2016) Effect of different organic amino cations on SAPO-34 for PES/SAPO-34 mixed matrix membranes toward CO 2/CH 4 separation. Journal of Applied Polymer Science, 133 (18).

Abdul Mannan, Hafiz and Mukhtar, Hilmi and Shima Shaharun, Maizatul and Roslee Othman, Mohd and Murugesan, Thanabalan (2016) Polysulfone/poly (ether sulfone) blended membranes for CO2 separation. Journal of Applied Polymer Science, 133 (5).

Ahmad, Nor Naimah Rosyadah and Mukhtar, Hilmi and Mohshim, Dzeti Farhah and Nasir, Rizwan and Man, Zakaria (2016) Surface modification in inorganic filler of mixed matrix membrane for enhancing the gas separation performance. Reviews in Chemical Engineering, 32 (2). pp. 181-200.

Abd Aziz, Nor Faiqa and Shariff, Azmi Mohd and Shaikh, Muhammad Shuaib and Keong, Lau Kok and Garg, Sahil and Aftab, Asma (2016) Physical properties of aqueous sodium salt solution of α-methylalanine (Na-AMALA). Procedia engineering, 148. pp. 444-450.

Ali Samer Muhsan, Norani M Mohamed, Faiz Ahmad, Thar M Badri Alb (2016) EFFECTS OF SINTERING PARAMETERS ON THE MICROSTRUCTURAL CHARACTERISTICS OF CU/CNTS NANOCOMPOSITES. EFFECTS OF SINTERING PARAMETERS ON THE MICROSTRUCTURAL CHARACTERISTICS OF CU/CNTS NANOCOMPOSITES.

Ali Wahid, Ahmed Mohamed Ahmed Salim, Gamal Ragab Gaafar, AP Wan, . (2016) Tectonic development of the Northwest Bonaparte Basin, Australia by using Digital Elevation Model (DEM). Tectonic development of the Northwest Bonaparte Basin, Australia by using Digital Elevation Model (DEM).

Ahmad, N.N.R. and Mukhtar, H. and Mohshim, D.F. and Nasir, R. and Man, Z. (2016) Effect of different organic amino cations on SAPO-34 for PES/SAPO-34 mixed matrix membranes toward CO2/CH4 separation. Journal of Applied Polymer Science, 133 (18).

Abdul Mannan, H. and Mukhtar, H. and Shima Shaharun, M. and Roslee Othman, M. and Murugesan, T. (2016) Polysulfone/poly(ether sulfone) blended membranes for CO2 separation. Journal of Applied Polymer Science, 133 (5).

Ahmad, R.F. and Malik, A.S. and Kamel, N. and Reza, F. and Abdullah, J.M. (2016) Simultaneous EEG-fMRI for working memory of the human brain. Australasian Physical and Engineering Sciences in Medicine, 39 (2). pp. 363-378.

Abdullah, M.A. and Ahmad, A. and Shah, S.M.U. and Shanab, S.M.M. and Ali, H.E.A. and Abo-State, M.A.M. and Othman, M.F. (2016) Integrated algal engineering for bioenergy generation, effluent remediation, and production of high-value bioactive compounds. Biotechnology and Bioprocess Engineering, 21 (2). pp. 236-249.

Alaloul, W.S. and Liew, M.S. and Zawawi, N.A.W.A. (2016) Identification of coordination factors affecting building projects performance. Alexandria Engineering Journal, 55 (3). pp. 2689-2698.

Al-Kayiem, H.H. and Huong, T.M. and Khan, J.A. (2016) Evaluation of pressure losses due to solids-in-liquid pipe flow by CFD simulation. ARPN Journal of Engineering and Applied Sciences, 11 (16). pp. 9908-9916.

Abd Majid, M.A. and Chi, T.C. and Mokhtar, A.K. (2016) Replacement analysis of amine circulation pumps. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7628-7632.

Altaf, K. and Rani, A.M.A. and Woldemichael, D.E. and Lemma, T.A. and Jian, C.Z. and Fiqri, M.H. (2016) Application of additive manufacturing/3D printing technologies and investment casting for prototype development of polycrystalline diamond compact (PDC) drill bit body. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6514-6518.

Ahmed, A.A. and Saaid, I.M. and Md Akhir, N.A. (2016) Effect of surfactants and grafted copolymer on stability of bentonite particles dispersion in brine system. ARPN Journal of Engineering and Applied Sciences, 11 (7). pp. 4822-4827.

Ahmed, M.G.A. and Dennis, J.O. and Khair, M.H.M. and Rabih, A.A.S. and Mian, M.U. (2016) Characterization of embedded micro-heater and temperature sensor in a CMOS-MEMS resonator for gas sensing. International Journal of Applied Engineering Research, 11 (6). pp. 4381-4386.

Ahmed, M.G.A. and Dennis, J.O. and Khair, M.H.M. and Rabih, A.A.S. and Mian, M.U. (2016) Modeling, simulation and experimental validation of the properties of macro-scale piezoelectric cantilevers for deduction of mass sensitivity of micro-cantilevers. International Journal of Applied Engineering Research, 11 (6). pp. 4512-4520.

Al-Kayiem, H.H. and Khan, J.A. (2016) CFD simulation of drag reduction in pipe flow by turbulence energy promoters. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14219-14224.

Abbas, T. and Ya, H.H. and Abdullah, M.Z. (2016) Energy absorption capability of aluminium tube partially wrapped with glass/epoxy subjected to quasi-static loading. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14313-14318.

Abdul Karim, Z.A. and Aiman, M.H. and Khan, M.Y. (2016) Efficacy of water-in-diesel emulsion to reduce exhaust gas pollutants of diesel engine. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14284-14289.

Amirul Syamin Mad Jeli, M. and Kee, K.E. and Hassan, S. and Ismail, M.C. (2016) Compatibilty study of thermoplastics in ron97 gasoline blended with ethanol. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14214-14218.

Amare, D.F. and Aklilu, T.B. and Gilani, S.I. (2016) Effects of performance deterioration on gas path measurements in an industrial gas turbine. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14202-14207.

Albarody, T.M.B. and Taufiq, M.B. (2016) Technical acceptance assurance limit of iflâ�¢ pipelines. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14248-14252.

Adam, I.K. and Aziz, A.R.A. and Yusuf, S. (2016) Response surface methodology optimization of palm rubber seed combined oil based biodiesel and idi diesel engine performance and emission. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14195-14201.

Aniza, N. and Hassan, S. and Inayat, M. (2016) Thermogravimetric kinetic analysis of Malaysian poultry processing waste material under inert and oxidative atmospheres. Journal of Mechanical Engineering and Sciences, 10 (2). pp. 1943-1955.

Akilu, S. and Baheta, A.T. and Sharma, K.V. and Vandragi, S.K. (2016) Properties of silica nanofluid in glycerol-ethylene glycol mixture as base liquid. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13019-13024.

Abd Majid, M.A. and Nakamura, T. and Xiaoming, Z. and Nordin, A. (2016) Effect of irreversibility on COP of double effect steam absorption chillers. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12979-12983.

Alkali, A.U. and Ginta, T.L. and Abdulrani, A.M. and Fawad, H. and Yasir, M. and Danish, M. (2016) Study of tool life of uncoated WC-Co insert during flame assisted machining of 316L stainless steel. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13441-13447.

Ali, B.H. and Gilani, S.I. and Al-Kayiem, H.H. and Khlief, A.K. (2016) Dual axis tracking model for a heliostat field solar tower heat flux investigation. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13344-13347.

Ahmed, F.A. and Elraies, A.K. and Ayoub, A.M. and Gaafar, R.G. (2016) An experimental investigation on the impact of brine composition on silica solubility at high temperature. International Journal of Mechanics, 10. pp. 23-26.

Askalany, A. and Habib, K. and Ghazy, M. and Assadi, M.K. (2016) Adsorption cooling system employing activated carbon/ hfc410a adsorption pair. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12253-12257.

Ahmed, U. and Hussin, H. and Muhammad, M. (2016) Comprehensive data collection for root cause failure analysis in oil and gas industries. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12153-12158.

Al-Hashimy, Z.I. and Al-Kayiem, H.H. and Time, R.W. (2016) Experimental investigation on the vibration induced by slug flow in horizontal pipe. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12134-12139.

Abdul-Rani, A.M. and Nanimina, A.M. and Ginta, T.L. and Rao, T.V.V.L.N. and Pedapati, S.R. (2016) Application of nano aluminum in modified EDM: pmedm. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12117-12121.

Arshad, S.A. and Tuan Ya, T.M.Y.S. and Sabir, O. (2016) Decomposed dicom video into frames using matlab. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12070-12072.

Arogundade, A.I. and Megat-Yusoff, P.S.M. and Ahmad, F. and Bhat, A.H. and Gillani, Q.F. (2016) Effect of bauxite residue loading on heat shielding performance of an ammonium polyphosphate based epoxy intumescent system. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12165-12169.

Al-Azawiey, S.S. and Al-Kayiem, H.H. and Hassan, S.B. (2016) Investigation on the influnce of collector height on the performance of solar chimney power plant. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12197-12201.

Aslam, M. and Ahmad, F. and Yusoff, P.S.M.B.M. and Altaf, K. and Omar, M.A. and Rafi Raza, M. (2016) Low pressure injection molding of boron admixed 316l stainless steel for engineering applications. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11960-11965.

Abd Karim, M.A. and Che Ismail, M. and Abd Karim, M.F. (2016) Performance of corrosion inhibitor with sand deposit in co2 environment. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12103-12107.

Assadi, M.K. and Zahraee, S.M. and Isaabadi, M.H.Z. and Habib, K. (2016) Evaluating different scenarios for optimizing energy consumption to achieve sustainable green building in malaysia. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12112-12116.

Anuar, S.B.S. and Ismail, M.C. and Raja, P.B. and Rahman, N.A.B.A. (2016) Condensation rate effect on top of line corrosion in CO2 environment. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12058-12063.

Abdul-Wahhab, H.A. and Aziz, A.R.A. and Al-Kayiem, H.H. and Nasif, M.S. (2016) CFD simulation of bubbly diesel-cng flow in a horizantal pipe under the influence of a magnetic field. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12122-12127.

Amir, N. and Jalil, A.N.A. and Ahmad, F. (2016) Characterization and study of char performance of glass wool and rockwool hybrid fibre reinforced intumescent coatings. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12268-12274.

Aurybi, M.A. and Al-Kayiem, H.H. and Gilani, S.I.U. and Ismaeel, A.A. (2016) Mathematical modeling to evaluate the performance enhancement of solar updraft power plant by external heat source. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12128-12133.

Al-Wakeel, H.B. and Karim, Z.A.A. (2016) Study on the effect of inserting multi-electrodes in a material exposed to electromagnetic wave. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12064-12069.

Afrooz, I.E. and Sinnathambi, C.M. and Karuppanan, S. and Ching, D.L.C. (2016) CFD simulation of bubbling fluidized bed: Effect of distributor plate orifice pattern configuration on hydrodynamics of gas-solid mixing. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11954-11959.

Al-Hashimy, Z.I. and Al-Kayiem, H.H. and Time, R.W. and Kadhim, Z.K. (2016) Numerical characterisation of slug flow in horizontal air/water pipe flow. International Journal of Computational Methods and Experimental Measurements, 4 (2). pp. 114-130.

Alkali, A.U. and Ginta, T.L. and Abdulrani, A.M. and Fawad, H. and Danish, M. (2016) Study on the machinability of 316L stainless steel using flame assisted machining. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8743-8749.

Adil, M. and Zaid, H.M. and Chuan, L.K. and Latiff, N.R.A. (2016) Influence of electromagnetic waves on viscosity and electrorheology of dielectric nanofluids-scale-based approach. Jurnal Teknologi, 78 (6-4). pp. 49-54.

Ahmad, I. and Awang, M. and Sufian, S. and Irfan Khan, M. and Mumtazb, M. (2016) Effect of ball milling of fly ash particle size on foam stabilization for EOR applications. Jurnal Teknologi, 78 (6-7). pp. 115-119.

Ahmad, A. and Shah, S.M.U. and Buang, A. and Abdullah, M.A. (2016) Anaerobic co-cultivation of multi-algal species with oil palm empty fruit bunches for mill effluent treatment and biomethane production. Jurnal Teknologi, 78 (5-6). pp. 65-73.

Ayoub, M. and Ullah, S. and Inayat, A. and Mahmood, S.M. (2016) Investigation of biodiesel-drive glycerol conversion to polyglycerol over basic modified AlPC catalyst. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2668-2672.

Al-Wakeel, H.B. and Karim, Z.A.A. and Al-Kayiem, H.H. (2016) A technique for localized rapid soot oxidation using metal aided microwave radiation. IEEE Transactions on Microwave Theory and Techniques, 64 (1). pp. 37-43.

Abdalla, I.I. and Ibrahim, T.B. and Nor, N.M. (2016) A study on different topologies of the tubular linear permanent magnet motor designed for linear reciprocating compressor applications. Applied Computational Electromagnetics Society Journal, 31 (1). pp. 85-91.

Aslam, M. and Ahmad, F. and Yusoff, P.S.M.B.M. and Altaf, K. and Omar, M.A. and Abdul Khalil, H.P.S. and Raza, M.R. (2016) Investigation of Rheological Behavior of Low Pressure Injection Molded Stainless Steel Feedstocks. Advances in Materials Science and Engineering, 2016.

Abdul, A.H. (2016) Development of soil formation corresponding to cyclic stress - derived shear strain function based on stratum index factor. International Journal of GEOMATE, 10 (2). pp. 1730-1736.

Abdul Latiff, A.H. (2016) Shallow gas cloud illumination analysis by the focal beam method. Journal of Geophysics and Engineering, 13 (1). pp. 96-108.

Alhussian, H. and Zakaria, N. and Patel, A. (2016) An unfair semi-greedy real-time multiprocessor scheduling algorithm. Computers and Electrical Engineering, 50. pp. 143-165.

Abdul Majid, N.D. and Mohd Shariff, A. and Mohamed Loqman, S. (2016) Ensuring emergency planning & response meet the minimum Process Safety Management (PSM) standards requirements. Journal of Loss Prevention in the Process Industries, 40. pp. 248-258.

Affam, A.C. and Chaudhuri, M. and Kutty, S.R.M. and Muda, K. (2016) Degradation of chlorpyrifos, cypermethrin and chlorothalonil pesticides in aqueous solution by FeGAC/H2O2 process. Desalination and Water Treatment, 57 (11). pp. 5146-5154.

Ayub, T. and Shafiq, N. and Khan, S.U. (2016) Compressive stress-strain behavior of HSFRC reinforced with basalt fibers. Journal of Materials in Civil Engineering, 28 (4).

Abdalla, I.I. and Ibrahim, T. and Mohd Nor, N.B. (2016) Development and optimization of a moving-magnet tubular linear permanent magnet motor for use in a reciprocating compressor of household refrigerators. International Journal of Electrical Power and Energy Systems, 77. pp. 263-270.

Abd Majid, M.A. and Chi, T.C. and Mokhtar, A.K. (2016) Replacement analysis of amine circulation pumps. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7628-7632.

Amok, J.O.M. and Saad, N.M. (2016) Performance Analysis of Multiantenna MC DS CDMA System Over Correlated Î·â��Âµ Multipath Fading Channels. Wireless Personal Communications, 89 (2). pp. 539-568.

Abdullah, M.A. and Nazir, M.S. and Raza, M.R. and Wahjoedi, B.A. and Yussof, A.W. (2016) Autoclave and ultra-sonication treatments of oil palm empty fruit bunch fibers for cellulose extraction and its polypropylene composite properties. Journal of Cleaner Production, 126. pp. 686-697.

Ahmed, S. and Ramli, A. and Yusup, S. (2016) CO2 adsorption study on primary, secondary and tertiary amine functionalized Si-MCM-41. International Journal of Greenhouse Gas Control, 51. pp. 230-238.

Ali, L. and Islam, S. and Gul, T. and Khan, I. and Dennis, L.C.C. (2016) New version of Optimal Homotopy Asymptotic Method for the solution of nonlinear boundary value problems in finite and infinite intervals. Alexandria Engineering Journal, 55 (3). pp. 2811-2819.

Ahmed, M.O. and Yenduri, A. and Kurian, V.J. (2016) Evaluation of the dynamic responses of truss spar platforms for various mooring configurations with damaged lines. Ocean Engineering, 123. pp. 411-421.

Alaloul, W.S. and Liew, M.S. and Zawawi, N.A.W.A. (2016) Identification of coordination factors affecting building projects performance. Alexandria Engineering Journal, 55 (3). pp. 2689-2698.

Adnan, M.H.M. and Hassan, M.F. (2016) Dynamic pricing for cloud service negotiation. Advanced Science Letters, 22 (10). pp. 2710-2714.

Abd Rahman, A.S. and Zakaria, M.N. and Masrom, S. (2016) Attack path selection optimization with adaptive genetic algorithms. Advanced Science Letters, 22 (10). pp. 2871-2875.

Ali Shah, S.A. and Laude, A. and Faye, I. and Tang, T.B. (2016) Automated microaneurysm detection in diabetic retinopathy using curvelet transform. Journal of Biomedical Optics, 21 (10).

Altaf, K. and Abdul Rani, A.M. and Ahmad, F. and Baharom, M. and Raghavan, V.R. (2016) Determining the effects of thermal conductivity on epoxy molds using profiled cooling channels with metal inserts. Journal of Mechanical Science and Technology, 30 (11). pp. 4901-4907.

Ali, F. and Saeed, S. and Shah, S.S. and Rahim, F. and Duclaux, L. and LevÃªque, J.-M. and Reinert, L. (2016) Sulfonated polyimide-clay thin films for energy application. Recent Patents on Nanotechnology, 10 (3). pp. 221-230.

Al-Kayiem, H.H. and Aja, O.C. (2016) Historic and recent progress in solar chimney power plant enhancing technologies. Renewable and Sustainable Energy Reviews, 58. pp. 1269-1292.

Ayub, T. and Shafiq, N. and Khan, S.U. (2016) Compressive stress-strain behavior of HSFRC reinforced with basalt fibers. Journal of Materials in Civil Engineering, 28 (4).

Ahmad, M.M. and Inayat, A. and Chugani, L.M. and Yusup, S. (2016) Process simulation of hydrogen production from bio-oil using iCON. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 38 (5). pp. 730-736.

Afzainizam, N. and Embong, A.M. and Yaacob, R.A.I.R. and Sabina, N.A.A. and Ashgaftaki, A.A. and Elsayed, M.M. (2016) Job stress among offshore personnel in oil and gas extraction industries. Indian Journal of Science and Technology, 9 (9).

Al-Kayiem, H.H. and Bhayo, B.A. and Assadi, M. (2016) Comparative critique on the design parameters and their effect on the performance of S-rotors. Renewable Energy, 99. pp. 1306-1317.

Akilu, S. and Sharma, K.V. and Baheta, A.T. and Mamat, R. (2016) A review of thermophysical properties of water based composite nanofluids. Renewable and Sustainable Energy Reviews, 66. pp. 654-678.

Al-Kayiem, H.H. and Aja, O.C. (2016) Historic and recent progress in solar chimney power plant enhancing technologies. Renewable and Sustainable Energy Reviews, 58. pp. 1269-1292.

Ahmad, A. and Buang, A. and Bhat, A.H. (2016) Renewable and sustainable bioenergy production from microalgal co-cultivation with palm oil mill effluent (POME): A review. Renewable and Sustainable Energy Reviews, 65. pp. 214-234.

Ahmad, A.A. and Zawawi, N.A. and Kasim, F.H. and Inayat, A. and Khasri, A. (2016) Assessing the gasification performance of biomass: A review on biomass gasification process conditions, optimization and economic evaluation. Renewable and Sustainable Energy Reviews, 53. pp. 1333-1347.

Azmi, W.H. and Sharma, K.V. and Mamat, R. and Najafi, G. and Mohamad, M.S. (2016) The enhancement of effective thermal conductivity and effective dynamic viscosity of nanofluids - A review. Renewable and Sustainable Energy Reviews, 53. pp. 1046-1058.

Al Kaisy, G.M.J. and Abdul Mutalib, M.I. and Bustam, M.A. and Leveque, J.-M. and Muhammad, N. (2016) Liquid-Liquid extraction of aromatics and sulfur compounds from base oil using ionic liquids. Journal of Environmental Chemical Engineering, 4 (4). pp. 4786-4793.

Al-Kayiem, H.H. and Bhayo, B.A. and Assadi, M. (2016) Comparative critique on the design parameters and their effect on the performance of S-rotors. Renewable Energy, 99. pp. 1306-1317.

Aziz, H. and Ahmad, F. (2016) Effects from nano-titanium oxide on the thermal resistance of an intumescent fire retardant coating for structural applications. Progress in Organic Coatings, 101. pp. 431-439.

Ali, Z. and Elamvazuthi, I. and Alsulaiman, M. and Muhammad, G. (2016) Automatic Voice Pathology Detection With Running Speech by Using Estimation of Auditory Spectrum and Cepstral Coefficients Based on the All-Pole Model. Journal of Voice, 30 (6). 757.e7-757.e19.

Ayodele, O.B. (2016) Structure and reactivity of ZSM-5 supported oxalate ligand functionalized nano-Fe catalyst for low temperature direct methane conversion to methanol. Energy Conversion and Management, 126. pp. 537-547.

Al-Shargie, F. and Kiguchi, M. and Badruddin, N. and Dass, S.C. and Hani, A.F.M. and Tang, T.B. (2016) Mental stress assessment using simultaneous measurement of EEG and fNIRS. Biomedical Optics Express, 7 (10). pp. 3882-3898.

Abd Rahman, A.S. and Zakaria, M.N. and Masrom, S. (2016) Attack path selection optimization with adaptive genetic algorithms. Advanced Science Letters, 22 (10). pp. 2871-2875.

Assadi, M.K. and Hanaei, H. and Mohamed, N.M. and Saidur, R. and Bakhoda, S. and Bashiri, R. and Moayedfar, M. (2016) Enhancing the efficiency of luminescent solar concentrators (LSCs). Applied Physics A: Materials Science and Processing, 122 (9).

Azeem, Babar and KuShaari, KuZilati and Man, Zakaria (2016) Effect of coating thickness on release characteristics of controlled release urea produced in fluidized bed using waterborne starch biopolymer as coating material. Procedia engineering, 148. pp. 282-289.

Alam, Md Z and Elgharbawy, Amal A and Moniruzzaman, Muhammad and Kabbashi, Nassereldeen A and Jamal, Parveen (2016) Screening of Factors Affecting the Enzymatic Hydrolysis of Empty Fruit Bunches in Aqueous Ionic Liquid and Locally Produced Cellulase System. International Journal of Chemical and Molecular Engineering, 10 (7). pp. 901-905.

Adawiyah, Noorul and Moniruzzaman, Muhammad and Hawatulaila, Siti and Goto, Masahiro (2016) Ionic liquids as a potential tool for drug delivery systems. MedChemComm, 7 (10). pp. 1881-1897.

Al-Shargie, Fares and Kiguchi, Masashi and Badruddin, Nasreen and Dass, Sarat C and Hani, Ahmad Fadzil Mohammad and Tang, Tong Boon (2016) Mental stress assessment using simultaneous measurement of EEG and fNIRS. Biomedical optics express, 7 (10). pp. 3882-3898.

Ali Shah, Syed Ayaz and Laude, Augustinus and Faye, Ibrahima and Tang, Tong Boon (2016) Automated microaneurysm detection in diabetic retinopathy using curvelet transform. Journal of biomedical optics, 21 (10). p. 101404.

B

Benjamin Sautter, Manuel Pubellier, Pierre Jousselin, Paolo Datt, . (2016) Late Paleogene rifting along the Malay Peninsula thickened crust. Late Paleogene rifting along the Malay Peninsula thickened crust.

Bashir Yasir, Deva Prasad Ghosh, Seyed Yaser Moussavi Alashloo, , . (2016) Seismic Modeling and Imaging Using Wave Theory for Fault and Fracture Identification. Seismic Modeling and Imaging Using Wave Theory for Fault and Fracture Identification.

Bahari, Mahadi B and Phuc, Nguyen Huu Huy and Abdullah, Bawadi and Alenazey, Feraih and Vo, Dai-Viet N (2016) Ethanol dry reforming for syngas production over Ce-promoted Ni/Al2O3 catalyst. Journal of Environmental Chemical Engineering, 4 (4). pp. 4830-4838.

Bashiri, Robabeh and Mohamed, Norani Muti and Kait, Chong Fai and Sufian, Suriati and Kakooei, Saied and Khatani, Mehboob and Gholami, Zahra (2016) Optimization hydrogen production over visible light-driven titania-supported bimetallic photocatalyst from water photosplitting in tandem photoelectrochemical cell. Renewable Energy, 99. pp. 960-970.

Bashiri, Robabeh and Mohamed, Norani Muti and Kait, Chong Fai and Sufian, Suriati and Hanaei, Hengameh and others (2016) Effect of preparation parameters on optical properties of Cu and Ni doped TiO2 photocatalyst. Procedia engineering, 148. pp. 151-157.

Bavoh, Cornelius B and Lal, Bhajan and Nashed, Omar and Khan, Muhammad S and Keong, Lau K and Bustam, Mohd Azmi (2016) COSMO-RS: An ionic liquid prescreening tool for gas hydrate mitigation. Chinese journal of chemical engineering, 24 (11). pp. 1619-1624.

Bavoh, Cornelius B and Partoon, Behzad and Keong, Lau K and Lal, Bhajan and Wilfred, CD (2016) Eeffect of 1-ethyl-3-methylimidazolium chloride and polyvinylpyrrolidone on kineticss of carbon dioxide hydrates. Int. J. Appl. Chem, 12 (1). pp. 6-11.

Bavoh, Cornelius B and Lal, Bhajan and Keong, Lau Kok and binti Jasamai, Mazuin and binti Idress, Mazlin (2016) Synergic kinetic inhibition effect of EMIM-Cl+ PVP on CO2 hydrate formation. Procedia engineering, 148. pp. 1232-1238.

Belachew, C.T. and Mokhtar, C.I. and Karuppanan, S. (2016) Strength assessment of a corroded pipeline through the burst test: Case study. Journal of Pipeline Systems Engineering and Practice, 7 (3). 04016003.

Bilad, M.R. (2016) Module-scale simulation of forward osmosis module-part A: Plate-and-frame. Indonesian Journal of Science and Technology, 1 (2). pp. 249-261.

Bahloul, M.R. and Yusoff, M.Z. and Abdel-Aty, A.-H. and Saad, M.N.M. (2016) An efficient likelihood-based modulation classification algorithm for multiple-input multiple-output systems. Journal of Computational and Theoretical Nanoscience, 13 (11). pp. 7879-7885.

Beheshti, M. and Kakooei, S. and Ismail, M.C. and Shahrestani, S. (2016) Design and implementation of scanning electrochemical microscopy (SECM) for scanning open circuit potential system on damaged coated surfaces. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14299-14302.

Bin Iman, H. and Pao, W. (2016) Various mathematical model of torsional vibration in oil well drill string and their validation techniques. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13389-13391.

Babiker, M.E. and Aziz, A.R.A. and Heikal, M.R. and Yusup, S. and Adam, A. (2016) Effects of enhancing cetane number of ethanol fumigation on diesel engine performance and emissions. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12994-12999.

Baheta, A.T. and Sidahmed, M. and Suleiman, S.A. and Fentaye, A.D. and Ghazali, S.A.S. (2016) Development and validation of a twin shaft industrial gas turbine performance model. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13365-13371.

Bhaskoro, P.T. and Japper-Jaafar, A. and Zainalabidin, M.A.F. and Chunhaur, L. (2016) The role and effect of aeration on combined demulsification process for stubborn water-in-oil emulsion from slop oil tank. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13025-13030.

Baig, Z. and Mamat, O. and Mustapha, M. and Altaf, K. and Mailabari, R.J. (2016) Graphene nanoplatelets (GNPS) exfoliation and dispersion in metal powder using different solvents. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12023-12028.

Burhani, N.R.A. and Muhammad, M. and Ismail, M.C. and Mahed, M.A. (2016) An experimental analysis using taguchi method in resolving the significant factors subject to corrosion under insulation. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11966-11970.

Basrawi, F. and Ibrahim, T.K. and Habib, K. and Yamada, T. (2016) Effect of operation strategies on the economic and environmental performance of a micro gas turbine trigeneration system in a tropical region. Energy, 97. pp. 262-272.

Bargshady, G. and Zahraee, S.M. and Ahmadi, M. and Parto, A. (2016) The effect of information technology on the agility of the supply chain in the Iranian power plant industry. Journal of Manufacturing Technology Management, 27 (3). pp. 427-442.

Babiker, M.E. and Aziz, A.R.A. and Heikal, M. and Yusup, S. and Hagos, F.Y. (2016) Experimental and simulation study on steam gasification of phoenix-dactylifera date palm seeds. International Journal of Automotive and Mechanical Engineering, 13 (1). pp. 3201-3214.

Biyanto, T.R. and Kusuma, F. and Musyafa, A. and Noriyati, R.D. and Bayuaji, R. and da Costa, S. and Irawan, S. (2016) Correction factor determination on failure rate equation of MacLaurin series for low and high mode application. Ain Shams Engineering Journal, 7 (2). pp. 827-834.

Biyanto, T.R. and Ramasamy, M. and Jameran, A.B. and Fibrianto, H.Y. (2016) Thermal and hydraulic impacts consideration in refinery crude preheat train cleaning scheduling using recent stochastic optimization methods. Applied Thermal Engineering, 108. pp. 1436-1450.

Baig, M.K. and Atiq, S. and Bashir, S. and Riaz, S. and Naseem, S. and Soleimani, H. and Yahya, N. (2016) Pulsed laser deposition of SmCo thin films for MEMS applications. Journal of Applied Research and Technology, 14 (5). pp. 287-292.

Bokhari, A. and Chuah, L.F. and Yusup, S. and KlemeÅ¡, J.J. and Akbar, M.M. and Kamil, R.N.M. (2016) Cleaner production of rubber seed oil methyl ester using a hydrodynamic cavitation: optimisation and parametric study. Journal of Cleaner Production, 136. pp. 31-41.

Budhathoki, M. and Barnee, S.H.R. and Shiau, B.-J. and Harwell, J.H. (2016) Improved oil recovery by reducing surfactant adsorption with polyelectrolyte in high saline brine. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 498. pp. 66-73.

Baioumy, H. and Ulfa, Y. (2016) Facies analysis of the Semanggol Formation, South Kedah, Malaysia: A possible Permianâ��Triassic boundary section. Arabian Journal of Geosciences, 9 (8).

Bashiri, R. and Mohamed, N.M. and Kait, C.F. and Sufian, S. and Kakooei, S. and Khatani, M. and Gholami, Z. (2016) Optimization hydrogen production over visible light-driven titania-supported bimetallic photocatalyst from water photosplitting in tandem photoelectrochemical cell. Renewable Energy, 99. pp. 960-970.

Bashir, M.J.K. and Mau Han, T. and Jun Wei, L. and Choon Aun, N. and Abu Amr, S.S. (2016) Polishing of treated palm oil mill effluent (POME) from ponding system by electrocoagulation process. Water Science and Technology, 73 (11). pp. 2704-2712.

Bataee, M. and Irawan, S. and Ridha, S. (2016) Wellbore stability model based on iterative coupling method in water alternating gas injection. Journal of Petroleum Exploration and Production Technology, 6 (4). pp. 755-775.

Bahari, M.B. and Phuc, N.H.H. and Abdullah, B. and Alenazey, F. and Vo, D.-V.N. (2016) Ethanol dry reforming for syngas production over Ce-promoted Ni/Al2O3 catalyst. Journal of Environmental Chemical Engineering, 4 (4). pp. 4830-4838.

Baharuddin, Siti Hawatulaila and Mustahil, Noorul Adawiyah and Abdullah, Atikah Aini and Sivapragasam, Magaret and Moniruzzaman, Muhammad (2016) Ecotoxicity study of amino acid ionic liquids towards Danio rerio fish: effect of cations. Proced\'ıa engineering, 148. pp. 401-408.

C

Choong Chee Meng, Manuel Pubellier, Chow Weng Sum, Abdelaziz Lot, . (2016) Deformation Styles and Structural History of the Paleozoic Limestone: Kinta Valley, Perak, Malaysia. Deformation Styles and Structural History of the Paleozoic Limestone: Kinta Valley, Perak, Malaysia.

Chung Wei Kiat, David Menier, SN Jamaludin, Deva Ghosh, . (2016) Geomorphology and Karstification of the Southern Field High Carbonates in Central Luconia Province. Geomorphology and Karstification of the Southern Field High Carbonates in Central Luconia Province.

Chuah, Lai Fatt and Bokhari, Awais and Yusup, Suzana and Kleme\v, Ji\v\'ı Jarom\'ır and Abdullah, Bawadi and Akbar, Majid Majeed (2016) Optimisation and kinetic studies of acid esterification of high free fatty acid rubber seed oil. Arabian Journal for Science and Engineering, 41. pp. 2515-2526.

Chuah, Lai Fatt and Yusup, Suzana and Aziz, Abdul Rashid Abd and Kleme\v, Ji\v\'ı Jarom\'ır and Bokhari, Awais and Abdullah, Mohd Zamri (2016) Influence of fatty acids content in non-edible oil for biodiesel properties. Clean Technologies and Environmental Policy, 18. pp. 473-482.

Chuah, Lai Fatt and Yusup, Suzana and Abd Aziz, Abdul Rashid and Bokhari, Awais and Abdullah, Mohd Zamri (2016) Cleaner production of methyl ester using waste cooking oil derived from palm olein using a hydrodynamic cavitation reactor. Journal of Cleaner Production, 112. pp. 4505-4514.

Chala, G.T. and Sulaiman, S.A. and Japper-Jaafar, A. and Wan, W.A.K. (2016) Investigation of convective heat transfer coefficient and initial temperature of waxy crude oil on the formation of voids. International Journal of Automotive and Mechanical Engineering, 13 (3). pp. 3754-3762.

Chandrakasan, G. and Ovinis, M. (2016) Investigation on thermocompression bonding using lead free sinterable paste and high lead solder paste for high power led packaging. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14332-14337.

Chouhan, M. and Hasbullah, H. (2016) Defense against Cache-Based Side Channel Attacks for secure cloud computing. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13146-13152.

Chuah, L.F. and Yusup, S. and Abd Aziz, A.R. and Bokhari, A. and Abdullah, M.Z. (2016) Cleaner production of methyl ester using waste cooking oil derived from palm olein using a hydrodynamic cavitation reactor. Journal of Cleaner Production, 112. pp. 4505-4514.

Chin, S.C. and Shafiq, N. and Nuruddin, M.F. (2016) Behaviour of RC beams with CFRP-strengthened openings. Structural Concrete, 17 (1). pp. 32-43.

Chung, T.D. and Ibrahim, R.B. and Asirvadam, V.S. and Saad, N.B. and Hassan, S.M. (2016) Adopting EWMA Filter on a Fast Sampling Wired Link Contention in WirelessHART Control System. IEEE Transactions on Instrumentation and Measurement, 65 (4). pp. 836-845.

Cheng Ying, Y. and Ab-Samat, H. and Kamaruddin, S. (2016) Practical production layout design for multi-product and small-lot-size production: A case study. Jurnal Teknologi, 78 (7). pp. 161-175.

Chen, X. and Pao, W. and Thornton, S. and Small, J. (2016) Unsaturated hydro-mechanical-chemical constitutive coupled model based on mixture coupling theory: Hydration swelling and chemical osmosis. International Journal of Engineering Science, 104. pp. 97-109.

Chai, Y.H. and Yusup, S. and Chok, V.S. and Arpin, M.T. and Irawan, S. (2016) Investigation of thermal conductivity of multi walled carbon nanotube dispersed in hydrogenated oil based drilling fluids. Applied Thermal Engineering, 107. pp. 1019-1025.

Chuah, L.F. and Mohd Amin, M. and Yusup, S. and Raman, N.A. and Bokhari, A. and KlemeÅ¡, J.J. and Alnarabiji, M.S. (2016) Influence of green catalyst on transesterification process using ultrasonic-assisted. Journal of Cleaner Production, 136. pp. 14-22.

Chughtai, O. and Badruddin, N. and Awang, A. and Rehan, M. (2016) Congestion-aware and traffic load balancing scheme for routing in WSNs. Telecommunication Systems, 63 (4). pp. 481-504.

Chemat, F. and Anjum, H. and Shariff, A.M. and Kumar, P. and Murugesan, T. (2016) Thermal and physical properties of (Choline chloride + urea + l-arginine) deep eutectic solvents. Journal of Molecular Liquids, 218. pp. 301-308.

Cheu, S.C. and Kong, H. and Song, S.T. and Saman, N. and Johari, K. and Mat, H. (2016) High removal performance of dissolved oil from aqueous solution by sorption using fatty acid esterified pineapple leaves as novel sorbents. RSC Advances, 6 (17). pp. 13710-13722.

Chughtai, O. and Badruddin, N. and Awang, A. and Rehan, M. (2016) Congestion-aware and traffic load balancing scheme for routing in WSNs. Telecommunication Systems, 63 (4). pp. 481-504.

Chin, S.C. and Shafiq, N. and Nuruddin, M.F. (2016) Behaviour of RC beams with CFRP-strengthened openings. Structural Concrete, 17 (1). pp. 32-43.

Chakraborty, A. and Chakraborty, S. and Chaudhuri, B. and Bhattacharjee, S. (2016) Process engineering studies on gold nanoparticle formation via dynamic spectroscopic approach. Gold Bulletin, 49 (3-4). pp. 75-85.

Chughtai, O. and Badruddin, N. and Awang, A. and Rehan, M. (2016) Congestion-aware and traffic load balancing scheme for routing in WSNs. Telecommunication Systems, 63 (4). pp. 481-504.

D

David Menier, Guilhem Estournès, Manoj Joseph Mathew, Muthuvaira, . (2016) Relict geomorphological and structural control on the coastal sediment partitioning, North of Bay of Biscay. Relict geomorphological and structural control on the coastal sediment partitioning, North of Bay of Biscay.

Danish, M. and Ginta, T.L. and Wahjoedi, B.A. (2016) Enhanced functional properties of Mg alloys by cryogenic machining. International Journal of Applied Engineering Research, 11 (7). pp. 5055-5059.

Danish, M. and Ginta, T.L. and Alkali, A.U. and Yasir, M. (2016) Thermal analysis of cryogenic machining of Mg alloy using FEM. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 5134-5138.

Daud, H. and Razali, R. and Zaki, M.R.O. and Shafie, A. (2016) Curve fitting using logarithmic function for sea bed logging data. Journal of Computational and Theoretical Nanoscience, 13 (10). pp. 7448-7454.

Danish, M. and Ginta, T.L. and Wahjoedi, B.A. and Yasir, M. and Alkali, A.U. (2016) Investigation of the temperature distribution on the tool and workpiece during cryogenic machining of mg alloy by finite element analysis. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14259-14263.

Dan, N.E. and Tarmizi Othman, M. and Hussain, P. and Amir, N.B. and Kakooei, S. (2016) Quenching and heat treatment of welded duplex stainless steel to avoid intergranular corrosion. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13405-13409.

Daud, M.A. and Ariffin, M.R.K. and Kularajasingam, S. and Hussin, C.H.C. and Juhan, N. and Hasni, M.M. (2016) Use of new efficient lossless data compression method in transmitting encrypted Baptista symmetric chaotic cryptosystem data. Jurnal Teknologi, 78 (6-4). pp. 61-66.

Dennis, J.O. and Rabih, A.A.S. and Md Khir, M.H. and Ahmed, M.G.A. and Ahmed, A.Y. (2016) Modeling and Finite Element Analysis Simulation of MEMS Based Acetone Vapor Sensor for Noninvasive Screening of Diabetes. Journal of Sensors, 2016.

Dennis, J.O. and Rabih, A.A.S. and Md Khir, M.H. and Ahmed, A.Y. and Ahmed, M.G. and Mian, M.U. (2016) Characterization of embedded microheater of a CMOSâ��MEMS gravimetric sensor device. Microelectronics Journal, 55. pp. 179-188.

Dennis, J.O. and Ahmad, F. and Khir, M.H.B.M. and Hamid, N.H.B. (2016) Post micromachining of MPW based CMOSâ��MEMS comb resonator and its mechanical and thermal characterization. Microsystem Technologies, 22 (12). pp. 2909-2919.

Din, I.U. and Tasleem, S. and Naeem, A. and Shaharun, M.S. and Nasir, Q. (2016) Study of Annealing Conditions on Particle Size of Nickel Ferrite Nanoparticles Synthesized by Wet Chemical Route. Synthesis and Reactivity in Inorganic, Metal-Organic and Nano-Metal Chemistry, 46 (3). pp. 405-408.

Dass, S.C. (2016) Comment on article by chkrebtii, campbell, calderhead, and girolami. Bayesian Analysis, 11 (4). pp. 1275-1277.

Dan-Mallam, Y. and Abdullah, M.Z. and Megat Yusoff, P.S.M. (2016) Influence of Recycling Frequency on Mechanical and Physical Properties of Kenaf Fiber Reinforced Polyoxymethylene Composite. Journal of Natural Fibers, 13 (5). pp. 532-546.

E

Elgharbawy, A.A. and Alam, M.Z. and Moniruzzaman, M. and Goto, M. (2016) Ionic liquid pretreatment as emerging approaches for enhanced enzymatic hydrolysis of lignocellulosic biomass. Biochemical Engineering Journal, 109. pp. 252-267.

Emamian, S. and Awang, M. and Hussai, P. and Meyghani, B. and Zafar, A. (2016) Influences of tool pin profile on the friction stir welding of AA6061. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12258-12261.

Embong, R. and Shafiq, N. and Kusbiantoro, A. and Nuruddin, M.F. (2016) Effectiveness of low-concentration acid and solar drying as pre-treatment features for producing pozzolanic sugarcane bagasse ash. Journal of Cleaner Production, 112. pp. 953-962.

Embong, R. and Kusbiantoro, A. and Shafiq, N. and Nuruddin, M.F. (2016) Strength and microstructural properties of fly ash based geopolymer concrete containing high-calcium and water-absorptive aggregate. Journal of Cleaner Production, 112. pp. 816-822.

Embong, R. and Shafiq, N. and Kusbiantoro, A. (2016) Silica extraction and incineration process of sugarcane bagasse ash (SCBA) as pozzolanic materials: A review. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 7304-7308.

Ezechi, E.H. and Kutty, S.R.B.M. and Isa, M.H. and Liew, M.S. (2016) Application of response surface methodology for the optimization of hexavalent chromium removal using a new low-cost adsorbent. Desalination and Water Treatment, 57 (47). pp. 22507-22518.

Ezechi, E.H. and Kutty, S.R.B.M. and Isa, M.H. and Malakahmad, A. and Ude, C.M. and Menyechi, E.J. and Olisa, E. (2016) Nutrient removal from wastewater by integrated attached growth bioreactor. Research Journal of Environmental Toxicology, 10 (1). pp. 28-38.

Ezechi, E.H. and Kutty, S.R.M. and Isa, M.H. and Malakahmad, A. and Udeh, C.M. and Menyechi, E.J. (2016) Treatment of synthetic domestic wastewater by integrated aerobic/anoxic bioreactor (IAAB). Nature Environment and Pollution Technology, 15 (3). pp. 943-946.

Elgharbawy, A.A. and Alam, M.Z. and Kabbashi, N.A. and Moniruzzaman, M. and Jamal, P. (2016) Evaluation of several ionic liquids for in situ hydrolysis of empty fruit bunches by locally-produced cellulase. 3 Biotech, 6 (2).

Emani, Sampath and Ramasamy, M and Shaari, Ku Zilati Bt Ku (2016) Effect of shear stress on crude oil fouling in a heat exchanger tube through CFD simulations. Procedia engineering, 148. pp. 1058-1065.

Elgharbawy, Amal Ahmed and Alam, Md Zahangir and Kabbashi, Nassereldeen Ahmad and Moniruzzaman, Muhammad and Jamal, Parveen (2016) Evaluation of several ionic liquids for in situ hydrolysis of empty fruit bunches by locally-produced cellulase. 3 Biotech, 6. pp. 1-15.

Elgharbawy, Amal A and Alam, Md Zahangir and Moniruzzaman, Muhammad and Goto, Masahiro (2016) Ionic liquid pretreatment as emerging approaches for enhanced enzymatic hydrolysis of lignocellulosic biomass. Biochemical Engineering Journal, 109. pp. 252-267.

F

Fayaz, Fahim and Danh, Huong T and Nguyen-Huy, Chinh and Vu, Khanh B and Abdullah, Bawadi and Vo, Dai-Viet N (2016) Promotional effect of Ce-dopant on Al2O3-supported Co catalysts for syngas production via CO2 reforming of ethanol. Procedia Engineering, 148. pp. 646-653.

Faisal, Abdelraheem and Kamaruddin, B and Ramasamy, M and Zabiri, H and Mahadzir, Shuhaimi (2016) Economic model predictive control of distillation column. Advanced Science Letters, 22 (10). pp. 2671-2675.

Farnam, Marjan and Mukhtar, Hilmi and Shariff, Azmi Mohd (2016) An investigation of blended polymeric membranes and their gas separation performance. RSC advances, 6 (104). pp. 102671-102679.

Farnam, Marjan and Mukhtar, Hilmi and Shariff, Azmi (2016) Analysis of the influence of CMS variable percentages on pure PES membrane gas separation performance. Procedia engineering, 148. pp. 1206-1212.

Farnam, M. and Mukhtar, H. and Shariff, A.M. (2016) An investigation of blended polymeric membranes and their gas separation performance. RSC Advances, 6 (104). pp. 102671-102679.

Fosu-Duah, E.L. and Padmanabhan, E. and GÃ¡mez Vintaned, J.A. (2016) Electrophoretic behavior of some shales from the setap formation, Sarawak Basin, Malaysia. International Journal of Applied Engineering Research, 11 (1). pp. 337-341.

Farhood, N.H. and Karuppanan, S. and Ya, H.H. and Mengal, A.N. (2016) Effect of low velocity impact on deformation behavior of metallic pressure vessel. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13319-13324.

Firmansyah and Aziz, A.R.A. and Heikal, M.R. and Abidin, E.Z.Z. (2016) The effect of wall temperature to the combustion of diesel/CNG mixture. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12923-12928.

Faez, K.M. and Hamdavi, S. and Ya, H.H. and Rao, T.V.V.L.N. (2016) An analytical investigation of the grooved journal bearing's performance with slip/no-slip texture bearing. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12990-12993.

Fmy, Y. and Othman, M. (2016) The mechanism and microstructure of silicanizing process on mild steel substrate in the medium of silica sand. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12005-12010.

Financie, R. and Moniruzzaman, M. and Uemura, Y. (2016) Enhanced enzymatic delignification of oil palm biomass with ionic liquid pretreatment. Biochemical Engineering Journal, 110. pp. 1-7.

Faisal, A. and Kamaruddin, B. and Ramasamy, M. and Zabiri, H. and Mahadzir, S. (2016) Economic model predictive control of distillation column. Advanced Science Letters, 22 (10). pp. 2671-2675.

Farnam, M. and Mukhtar, H. and Shariff, A.M. (2016) An investigation of blended polymeric membranes and their gas separation performance. RSC Advances, 6 (104). pp. 102671-102679.

Farooq, M. and Ramli, A. and Naeem, A. and Saleem Khan, M. (2016) Effect of different metal oxides on the catalytic activity of Î³-Al2O3-MgO supported bifunctional heterogeneous catalyst in biodiesel production from WCO. RSC Advances, 6 (2). pp. 505-512.

Financie, Revie and Moniruzzaman, Muhammad and Uemura, Yoshimitsu (2016) Enhanced enzymatic delignification of oil palm biomass with ionic liquid pretreatment. Biochemical Engineering Journal, 110. pp. 1-7.

G

Gebremedhen, H.S. and Woldemichael, D.E. and Hashim, F.M. (2016) Structural topology optimization subjected to relaxed stress and design variables. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6490-6495.

Gebremedhen, H.S. and Woldemichael, D.E. and Hashim, F.M. (2016) A literature survey on challenges in stress based topology optimization. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14188-14194.

Gilani, S.E. and Al-Kayiem, H.H. and Woldemicheal, D.E. (2016) Effect of conical pin arrangement on heat transfer efficiency of a free convective solar air heater. Journal of Mechanical Engineering and Sciences, 10 (2). pp. 2053-2064.

Gilani, S.E. and Al-Kayiem, H.H. and Matthias, B. and Woldemicheal, D.E. (2016) Enhancement of the heat transfer rate in free convection solar air heater using pin shaped artificial roughness on absorber plate. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12953-12958.

Gillani, Q.F. and Ahmad, F. and Mutlib, M.I.A. and Melor, P.S. and Arogundade, A. (2016) Synergistic effects of zinc borate and halloysite nanotubes (HNTS) on char morphology and gases emission of epoxy based intumescent fire retardant systems. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12053-12057.

George, J.M. and Kurian, V.J. and Wahab, M.M.A. (2016) Changes in the pushover analysis results of offshore jacket platforms due to the incorporation of the aging effect of piles. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2602-2606.

Ghasemi, M. and Wan Daud, W.R. and Alam, J. and Ilbeygi, H. and Sedighi, M. and Ismail, A.F. and Yazdi, M.H. and Aljlil, S.A. (2016) Treatment of two different water resources in desalination and microbial fuel cell processes by poly sulfone/Sulfonated poly ether ether ketone hybrid membrane. Energy, 96. pp. 303-313.

Gonfa, G. and Bustam, M.A. and Shariff, A.M. (2016) Quantum-chemical-based quantitative structure-activity relationships for estimation of CO2 absorption/desorption capacities of amine-based absorbents. International Journal of Greenhouse Gas Control, 49. pp. 372-378.

Gilani, S.I.-U. and Khan, M.H. and Ali, M. (2016) Revisiting Fanger's thermal comfort model using mean blood pressure as a bio-marker: An experimental investigation. Applied Thermal Engineering, 109. pp. 35-43.

Gardezi, S.S.S. and Shafiq, N. and Zawawi, N.A.W.A. and Khamidi, M.F. and Farhan, S.A. (2016) A multivariable regression tool for embodied carbon footprint prediction in housing habitat. Habitat International, 53. pp. 292-300.

Ganesan, T. and Vasant, P. and Elamvazuthi, I. (2016) Multiobjective optimization using particle swarm optimization with non-Gaussian random generators. Intelligent Decision Technologies, 10 (2). pp. 93-103.

Ghani, M.F.A. and Simon, N. and Lai, G.T. and Mohamed, T.R.T. and Rafek, A.G. (2016) Study of lineament density in potential evaluation of rock fall in Kinta Valley Kajian ketumpatan lineamen dalam penilaian potensi jatuhan batuan di kawasan Lembah Kinta. Sains Malaysiana, 45 (12). pp. 1887-1896.

Gupta, R. and Elamvazuthi, I. and George, J. (2016) Image quality assessment: A case study on ultrasound images of supraspinatus tendon. Studies in Computational Intelligence, 651. pp. 257-284.

Ganesan, T. and Vasant, P. and Elamvazuthi, I. and Shaari, K.Z.K. (2016) Game-theoretic differential evolution for multiobjective optimization of green sand mould system. Soft Computing, 20 (8). pp. 3189-3200.

Gonfa, G. and Bustam, M.A. and Shariff, A.M. and Muhammad, N. and Ullah, S. (2016) Quantitative structureâ��activity relationships (QSARs) for estimation of activity coefficient at infinite dilution of water in ionic liquids for natural gas dehydration. Journal of the Taiwan Institute of Chemical Engineers, 66. pp. 222-229.

Ganesan, Timothy and Vasant, Pandian and Elamvazuthi, Irraivan and Shaari, Ku Zilati Ku (2016) Game-theoretic differential evolution for multiobjective optimization of green sand mould system. Soft Computing, 20. pp. 3189-3200.

Garg, Sahil and Shariff, AM and Shaikh, MS and Lal, Bhajan and Aftab, Asma and Faiqa, Nor (2016) Selected physical properties of aqueous potassium salt of l-phenylalanine as a solvent for CO2 capture. Chemical Engineering Research and Design, 113. pp. 169-181.

Garg, Sahil and Shariff, AM and Shaikh, MS and Lal, Bhajan and Aftab, Asma and Faiqa, Nor (2016) Surface tension and derived surface thermodynamic properties of aqueous sodium salt of L-phenylalanine. Indian J. Sci. Technol, 9. pp. 1-11.

Garg, Sahil and Shariff, AM and Shaikh, MS and Lal, Bhajan and Aftab, Asma and Faiqa, Nor (2016) VLE of CO2 in aqueous potassium salt of L-phenylalanine: experimental data and modeling using modified Kent-Eisenberg model. Journal of Natural Gas Science and Engineering, 34. pp. 864-872.

H

Hagos, Ftwi Yohaness and Aziz, Abd Rashid A and Sulaiman, Shaharin A (2016) Effect of injection timing on combustion, performance and emissions of lean-burn syngas (H2/CO) in spark-ignition direct-injection engine. International Journal of Engine Research, 17 (9). pp. 921-933.

Hussain, Maham and Tufa, Lemma Dendena and Azlan, Raja Nur Ariana Bt Raja and Yusup, Suzana and Zabiri, Haslinda (2016) Steady state simulation studies of gasification system using palm kernel shell. Procedia engineering, 148. pp. 1015-1021.

Hairul, NAH and Shariff, AM and Tay, WH and Mortel, AMAVD and Lau, KK and Tan, LS (2016) Modelling of high pressure CO2 absorption using PZ+ AMP blended solution in a packed absorption column. Separation and Purification Technology, 165. pp. 179-189.

Hong, Ban Zhen and Keong, Lau Kok and Shariff, Azmi Mohd (2016) CFD modelling of most probable bubble nucleation rate from binary mixture with estimation of componentsâ�� mole fraction in critical cluster. Continuum Mechanics and Thermodynamics, 28. pp. 655-668.

Humayun, Hudzaifah Yousuf and Shaarani, M Nizamuddin NM and Abdullah, Bawadi and Salam, Md Abdus and others (2016) The effect of co-solvent on the solubility of a sparingly soluble crystal of benzoic acid. Procedia engineering, 148. pp. 1320-1325.

Hadi, S.H.A.A. and Mannan, H.A. and Mukhtar, H. and Shaharun, M.S. and Murugesan, T. (2016) Morphological analysis of Polyethersulfone/polyvinyl Acetate blend membrane synthesized at various polymer concentrations. IOP Conference Series: Earth and Environmental Science, 36 (1).

Hussin, H. and Shuaib, K. and Abd Majid, M.A. (2016) A case study on fuzzy logic-based risk assessment in oil and gas industry. ARPN Journal of Engineering and Applied Sciences, 11 (5). pp. 3049-3054.

Haris, F. and Hussain, P. and Abidin, K.A.Z. (2016) Feasible joining on the reaction layer of diffusion bonded sialon and duplex stainless steel. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14290-14293.

Huat, B.Y. and Ghai, L.L. and Pao, W. and Boon, T.T. (2016) Sensitivity analysis of concave capacitance sensors for holdup measurement in two-phase flow. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14244-14247.

Hamizol, M.S. and Megat-Yusoff, P.S.M. and Nasrudin, M.A. and Meor Said, M.A. and Jasmani, M.S. and Syed Ahmad Ghazali, S.M.A. (2016) Investigation on changes in gamma prime precipitate on varying surface locations of IN738 engine turbine blade. Journal of Mechanical Engineering and Sciences, 10 (2). pp. 2076-2083.

Haghanifar, S. and Kakooei, S. and Ismail, M.C. (2016) Electrochemical hydrogen storage characteristics of Mg2-xCxNi (x = 0, 0.1, 0.2, 0.5) alloys prepared by mechanical alloying. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13013-13018.

Hussin, H. and Ghazali, Z. and Suratanin, N.A. and Muhamad, M. and Mokhtar, A.A. (2016) An investigation into root cause failure analysis (RCFA) practices in oil and gas industry. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13372-13375.

Hussain, N. and Bin Baharom, M. and Maharun, M. (2016) The effect of total length of wire ropes on the torsional properties of Low-Stiffness-Resilient-Shaft. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12913-12918.

Hamdavi, S. and Ya, H.H. and Rao, T.V.V.L.N. (2016) Effect of surface texturing on hydrodynamic performance of journal bearings. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 172-176.

Hashim, U.K.M. and Ahmad, A. and Aboobaider, B.M. and Sakidin, H. and Subatira, B. and Isa, M.S.M. (2016) Change detection from Landsat-5 TM Satellite data. ARPN Journal of Engineering and Applied Sciences, 11 (17). pp. 10234-10238.

Hanaei, H. and Assadi, M.K. and Mohamed, N.M. and Bashiri, R. (2016) A theoretical investigation into the performance of swcnts as an antireflection coating layer for silicon solar cell. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12094-12098.

Hamdavi, S. and Ya, H.H. and Rao, T.V.V.L.N. and Faez, K.M. (2016) An analytical approach to investigate the effect of grooved surface on short journal bearing's performance. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12045-12049.

Hashim, N. and Mamat, O. and Baig, Z. (2016) Application of taguchi's method on the purifying process of tronoh silica sand via mechanical milling and ultrasonic bath. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12017-12022.

Hashim, F.M. and Abbasi, A. (2016) Empirical modeling of hydrate formation prediction in deepwater pipelines. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12212-12216.

Hussain, A. and Ibrahim, T. and Nallagoowden, P. and Memon, F. (2016) Optimization of linear permanent magnet (PM) generator with triangular-shaped magnet for wave energy conversion using finite element method. Journal of Electrical Systems, 12 (3). pp. 583-590.

Hashim, A.S. and Ahmad, W.F.W. (2016) Mobile school conceptual model for secondary schools in Malaysia. Jurnal Teknologi, 78 (8-2). pp. 1-11.

Hamdi, Z. and Awang, M. (2016) Effect of low temperature CO2 injection in high temperature oil reservoirs using slimtube experiment. Jurnal Teknologi, 78 (6-6). pp. 35-39.

Hematpur, H. and Mahmood, S.M. and Amer, M.M. (2016) Experimental investigation of flow rateâ��s effect on surfactant-alternating-gas foam process. Jurnal Teknologi, 78 (6-4). pp. 55-60.

Habib, K. and Askalany, A. (2016) Study of a silica gel-water based dual mode adsorption chiller. International Journal of Engineering and Technology, 8 (2). pp. 1010-1017.

Hafezolghorani Esfahani, M. and Hejazi, F. and Vaghei, R. and Nikbakht, E. and Tze, D.C.J. (2016) Development of Constitutive Model for Precast Prestressed Concrete Segmental Columns. Modelling and Simulation in Engineering, 2016.

Halim, A. and Sulam, M.B. (2016) Prediction of soil settlement based on constant plastic index method. International Journal of GEOMATE, 11 (5). pp. 2717-2722.

Hong, B.Z. and Keong, L.K. and Shariff, A.M. (2016) CFD modelling of most probable bubble nucleation rate from binary mixture with estimation of componentsâ�� mole fraction in critical cluster. Continuum Mechanics and Thermodynamics, 28 (3). pp. 655-668.

Hairul, N.A.H. and Shariff, A.M. and Bustam, M.A. (2016) Mass transfer performance of 2-amino-2-methyl-1-propanol and piperazine promoted 2-amino-2-methyl-1-propanol blended solvent in high pressure CO2 absorption. International Journal of Greenhouse Gas Control, 49. pp. 121-127.

Hussain, N. and Karsiti, M.N. and Jeoti, V. and Yahya, N. (2016) Use of wavelets in marine controlled source electromagnetic method for geophysical modeling. International Journal of Applied Electromagnetics and Mechanics, 51 (4). pp. 431-443.

Hematpour, H. and Parvazdavani, M. and Abbasi, S. and Mahmood, S.M. (2016) Investigation of low saline waterâ��s effects on relative permeability in carbonate reservoirs. Jurnal Teknologi, 78 (10). pp. 93-99.

Hagos, F.Y. and Aziz, A.R.A. and Sulaiman, S.A. (2016) Effect of injection timing on combustion, performance and emissions of lean-burn syngas (H2/CO) in spark-ignition direct-injection engine. International Journal of Engine Research, 17 (9). pp. 921-933.

Hassan, S. and Khosravi, A. and Jaafar, J. and Khanesar, M.A. (2016) A systematic design of interval type-2 fuzzy logic system using extreme learning machine for electricity load demand forecasting. International Journal of Electrical Power and Energy Systems, 82. pp. 1-10.

Hairul, N.A.H. and Shariff, A.M. and Tay, W.H. and Mortel, A.M.A.V.D. and Lau, K.K. and Tan, L.S. (2016) Modelling of high pressure CO2 absorption using PZ+AMP blended solution in a packed absorption column. Separation and Purification Technology, 165. pp. 179-189.

Hanaei, H. and Assadi, M.K. and Saidur, R. (2016) Highly efficient antireflective and self-cleaning coatings that incorporate carbon nanotubes (CNTs) into solar cells: A review. Renewable and Sustainable Energy Reviews, 59. pp. 620-635.

Hussain, Z. and Sulaiman, S.A. and Khan, A. and Khan, K.M. and Perveen, S. and Naz, M.Y. (2016) Two-Step Pyrolysis of Spirogyra for Fuels Using Cement Catalytic. Waste and Biomass Valorization, 7 (6). pp. 1481-1489.

Hussein, A.M. and Bakar, R.A. and Kadirgama, K. and Sharma, K.V. (2016) Heat transfer enhancement with elliptical tube under turbulent flow tio2-water nanofluid. Thermal Science, 20 (1). pp. 89-97.

Hina, S. and Dominic, P.D.D. and Ratnam, K.A. (2016) A Relational Study of Critical Threats and Risks Affecting the Potential Usage of Collaborative Pattern. Global Journal of Flexible Systems Management, 17 (4). pp. 373-388.

Huat, Beh Yong and Ghai, Lim Lam and Pao, William and Boon, Tang Tong (2016) Sensitivity analysis of concave capacitance sensors for holdup measurement in two-phase flow. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14244-14247.

I

Isa, Faezah and Suleman, Humbul and Zabiri, Haslinda and Maulud, Abdulhalim Shah and Ramasamy, M and Tufa, Lemma Dendena and Shariff, Azmi Mohd (2016) An overview on CO2 removal via absorption: Effect of elevated pressures in counter-current packed column. Journal of Natural Gas Science and Engineering, 33. pp. 666-677.

Iqbal, Farukh and Abd Mutalib, Mohamed Ibrahim and Shaharun, Maizatul Shima and Abdullah, Bawadi and others (2016) Synthesis of ZnFe2O4 using sol-gel method: effect of different calcination parameters. Procedia engineering, 148. pp. 787-794.

Irfan, Muhammad and Ahmad, Tausif and Moniruzzaman, M Muhammad and Abdullah, Bawadi B and Bhattacharjee, Sekhar (2016) Ionic liquid mediated biosynthesis of gold nanoparticles using Elaeis guineensis (oil palm) leaves extract. Procedia engineering, 148. pp. 568-572.

Ibrahim, O. and Yahaya, N.Z. and Saad, N. (2016) State-space Modelling and Digital Controller Design for DC-DC Converter. Telkomnika (Telecommunication Computing Electronics and Control), 14 (2). pp. 497-506.

Irfan, M. and Saad, N. and Ibrahim, R. and Asirvadam, V.S. and Magzoub, M. (2016) An Intelligent Fault Diagnosis of Induction Motors in an Arbitrary Noisy Environment. Journal of Nondestructive Evaluation, 35 (1). pp. 1-13.

Inayat, M. and Sulaiman, S.A. and Kumar, A. and Guangul, F.M. (2016) Effect of fuel particle size and blending ratio on syngas production and performance of co-gasification. Journal of Mechanical Engineering and Sciences, 10 (2). pp. 2187-2199.

Imran, M.N. and Baharom, M.B. (2016) Simplified modelling method to predict output speed of an overrunning clutch using ADAMS/Solver subroutine. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13038-13041.

Ismail, A. and Awang, M. and Hamid, D.A. and Ab Rahman, F. and Khalid, P.Z.M. (2016) Temperature profile and fracture location of friction stir welded AA6063-T6 pipe butt joint. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13305-13308.

Ismail, A. and Awang, M. and Rojan, M.A. and Samsudin, S.H. (2016) The characteristic of temperature curves for friction stir welding of aluminium alloy 6063-T6 pipe during tool plunging stage. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 277-280.

Ismael, M.A. and Heikal, M.R. and Rashid, A. and Aziz, A. and Crua, C. (2016) An overview of experimental techniques of the investigation of water-diesel emulsion characteristics droplets micro-explosion. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11975-11981.

Irshad, K. and Habib, K. and Kareem, M.W. (2016) Effect of air gap on performance enhancement of building assisted with photo voltaic systems. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12078-12083.

Ismaeel, A.A. and Al-Kayiem, H.H. and Baheta, A.T. and Aurybi, M.A. (2016) Comparative critique on the performance evaluation of a solar - air heater for natural updraft solar system. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12170-12175.

Ibrahim, N.-N.M.D. and Awang, M. and Hussain, P. (2016) Effect of thickness on residual stress in joining sialon to AISI 420. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4191-4196.

Ibrahim, O. and Yahaya, N.Z. and Saad, N. (2016) PID controller response to set-point change in DC-DC converter control. International Journal of Power Electronics and Drive Systems, 7 (2). pp. 294-302.

Ibrahim, A.M. and Baharudin, B. and Md Said, A. and Hashimah, P.N. (2016) Classification of breast tumor in mammogram images using unsupervised feature learning. American Journal of Applied Sciences, 13 (5). pp. 552-561.

Irshad, M.I. and Mohamed, N.M. and Abdullah, M.Z. and Saheed, M.S.M. and Mumtaz, A. and Yasar, M. and Yar, A. and Zeeshan, M.A. and Sort, J. (2016) Influence of the electrodeposition potential on the crystallographic structure and effective magnetic easy axis of cobalt nanowires. RSC Advances, 6 (17). pp. 14266-14272.

Ibrahim, N. and Ahmad, W.F.W. and Shafie, A. (2016) Effectiveness study on multimedia mobile application for children: Mfolktales. Journal of Theoretical and Applied Information Technology, 89 (1). pp. 269-277.

Ismail, S. and Abdul Rahman, H. and Abidin, E.Z. and Isha, A.S.N. and Abu Bakar, S. and Zulkifley, N.A. and Fuad, A.F.A. (2016) The effect of faith-based smoking cessation intervention during Ramadan among Malay smokers. Qatar Medical Journal, 2016 (2).

J

Jusoh, Norwahyu and Yeong, Yin Fong and Cheong, Weng Leong and Lau, Kok Keong and Shariff, Azmi M (2016) Facile fabrication of mixed matrix membranes containing 6FDA-durene polyimide and ZIF-8 nanofillers for CO2 capture. Journal of Industrial and Engineering Chemistry, 44. pp. 164-173.

Jamil, Farrukh and Ahmad, Murni M and Yusup, Suzana and Abdullah, Bawadi (2016) Upgrading of bio-oil from palm kernel shell by catalytic cracking in the presence of HZSM-5. International Journal of Green Energy, 13 (4). pp. 424-429.

Jusoh, Norwahyu and Yeong, Yin Fong and Lau, Kok Keong and Shariff, Azmi M (2016) Fabrication of ZIF-8/polyimide mixed matrix membranes and their structural properties. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 11140-11144.

Jusoh, Norwahyu and Lau, Kok Keong and Yeong, Yin Fong and Shariff, Azmi M (2016) Bulk CO2/CH4 separation for offshore operating conditions using membrane process. sains Malaysiana, 45 (11). pp. 1707-1714.

Jusoh, Norwahyu and Yeong, Yin Fong and Chew, Thiam Leng and Lau, Kok Keong and Shariff, Azmi Mohd (2016) Current development and challenges of mixed matrix membranes for CO2/CH4 separation. Separation & Purification Reviews, 45 (4). pp. 321-344.

Jusoh, Norwahyu and Yeong, Yin Fong and Lau, Kok Keong and Shariff, Azmi Mohd (2016) Mixed matrix membranes comprising of ZIF-8 nanofillers for enhanced gas transport properties. Procedia engineering, 148. pp. 1259-1265.

Jamil, A. and Ching, O.P. and Shariff, A.B.M. (2016) Current Status and Future Prospect ofÂ Polymer-Layered Silicate Mixed-Matrix Membranes for CO2/CH4 Separation. Chemical Engineering and Technology, 39 (8). pp. 1393-1405.

Jamil, A. and Ching, O.P. and Shariff, A.M. (2016) Macrovoids suppression in polyetherimide (Pei) hollow fibre membranes by optimizing the air gap. International Journal of Applied Engineering Research, 11 (19). pp. 9684-9688.

Jusoh, N. and Yeong, Y.F. and Lau, K.K. and Shariff, A.M. (2016) Fabrication of ZIF-8 / polyimide mixed matrix membranes and their structural properties. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 11140-11144.

Jebaraj, S. (2016) Energy planning for india with focus on cost of coal based power generation. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14117-14120.

Jamil, I.E.A. and Al-Kayiem, H.H. (2016) Validation of simulation procedure for vertical oil/water flow. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13376-13379.

Johari, M.I.A. and Mustapha, M. and Mamat, O. and Kakooei, S. and Ginta, T.L. and Ismadi, M.Z.P. (2016) The microstructure, physical and mechanical properties of silicon carbide with alumina and yttria as sintering additives. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13300-13304.

Jaal, R.A. and Ismail, M.C. and Ariwahjoedi, B. (2016) Determination of critical micelle concentration (CMC) of corrosion inhibitor via electrochemical measurement. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13431-13434.

Javaid, M.Y. and Ovinis, M. and Hashim, F.B.M. and Maimun, A. and Ahmed, Y.M. and Ullah, B. (2016) Spiraling motion of an underwater glider: Dynamic modeling. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13006-13012.

Jamaludin, A.A.B. and Kamaruddin, S.B. and Othman, A.R.B. and Ismadi, M.Z.P. (2016) Determination of optimal PDC cutters geometry for multi-response optimization using the Taguchi method. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13410-13414.

Jessam, R.A. and Al-Kayiem, H.H. and Nasif, M.S. (2016) Flow control in s-shaped aggressive diffuser using grooves on the inner and outer surfaces. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12247-12252.

Javaid, M.Y. and Ovinis, M. and Hashim, F.M. and Maimun, A. and Ahmed, Y.M. and Ullah, B. (2016) Effect of water current on underwater glider velocity and range. Jurnal Teknologi, 78 (10-4). pp. 47-53.

JosephNg, P.S. and KamilMahmood, A. and Kang, C.M. and Choo, P.Y. and Wong, S.W. and Phan, K.Y. and Lim, E.H. (2016) Exostructure services for infrastructure resources optimization. Journal of Telecommunication, Electronic and Computer Engineering, 8 (4). pp. 65-69.

Jaafar, J. and Indra, Z. and Zamin, N. (2016) A category classification algorithm for Indonesian and Malay news documents. Jurnal Teknologi, 78 (8-2). pp. 121-132.

Jusoh, S.N. and Mohamad, H. and Marto, A. and Alias, N.E. and Hezmi, M.A. and Abdullah, R.A. and Mohd. Yunus, N.Z. (2016) Investigation on the mechanics of precast segment tunnel lining. Jurnal Teknologi, 78 (8-6). pp. 61-66.

Jamil, A. and Ching, O.P. and Shariff, A.M. (2016) Minimizing morphological defects of PEI hollow fibre membrane by optimizing the dope viscosity. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1687-1691.

Jilani, M.T. and Wen, W.P. and Cheong, L.Y. and Rehman, M.Z.U. and Khan, M.T. (2016) Determination of size-independent effective permittivity of an overlay material using microstrip ring resonator. Microwave and Optical Technology Letters, 58 (1). pp. 4-9.

Jilnai, M.T. and Wen, W.P. and Cheong, L.Y. and Rehman, M.Z.U. (2016) A microwave ring-resonator sensor for non-invasive assessment of meat aging. Sensors (Switzerland), 16 (1).

Jan, M.T. and Ahmad, F. and Hamid, N.H.B. and Md Khir, M.H.B. and Ashraf, K. and Shoaib, M. (2016) Temperature dependent Young's modulus and quality factor of CMOS-MEMS resonator: Modelling and experimental approach. Microelectronics Reliability, 57. pp. 64-70.

Jilani, M.T. and Wen, W.P. and Rehman, M.Z.U. and Khan, A.M. and Cheong, L.Y. (2016) Microwave sensor for non-destructive dielectric characterization of biological systems. International Journal of Applied Electromagnetics and Mechanics, 50 (2). pp. 353-363.

Jatoi, M.A. and Kamel, N. and Malik, A.S. and Faye, I. and Bornot, J.M. and Begum, T. (2016) EEG-based brain source localization using visual stimuli. International Journal of Imaging Systems and Technology, 26 (1). pp. 55-64.

Jilani, M.T. and Cheong, L.Y. and Saand, A.S. and Wen, W.P. and Rehman, M.Z.U. (2016) Non-destructive characterization of dielectric materials by microwave spectroscopy in LS band. Journal of Optoelectronics and Advanced Materials, 18 (5-6). pp. 589-594.

Jan, M.T. and Ahmad, F. and Hamid, N.H.B. and Khir, M.H.B.M. and Shoaib, M. and Ashraf, K. (2016) Experimental investigation of temperature and relative humidity effects on resonance frequency and quality factor of CMOS-MEMS paddle resonator. Microelectronics Reliability, 63. pp. 82-89.

Johari, K. and Saman, N. and Song, S.T. and Chin, C.S. and Kong, H. and Mat, H. (2016) Adsorption enhancement of elemental mercury by various surface modified coconut husk as eco-friendly low-cost adsorbents. International Biodeterioration and Biodegradation, 109. pp. 45-52.

Jusoh, N. and Yeong, Y.F. and Chew, T.L. and Lau, K.K. and Shariff, A.M. (2016) Current Development and Challenges of Mixed Matrix Membranes for CO2/CH4 Separation. Separation and Purification Reviews, 45 (4). pp. 321-344.

Jilnai, M.T. and Wen, W.P. and Cheong, L.Y. and Rehman, M.Z.U. (2016) A microwave ring-resonator sensor for non-invasive assessment of meat aging. Sensors (Switzerland), 16 (1).

Jusoh, N. and Lau, K.K. and Yeong, Y.F. and Shariff, A.M. (2016) Bulk CO2/CH4 separation for offshore operating conditions using membrane process. Sains Malaysiana, 45 (11). pp. 1707-1714.

Johari, K. and Saman, N. and Song, S.T. and Cheu, S.C. and Kong, H. and Mat, H. (2016) Development of coconut pith chars towards high elemental mercury adsorption performance - Effect of pyrolysis temperatures. Chemosphere, 156. pp. 56-68.

Jusoh, N. and Yeong, Y.F. and Cheong, W.L. and Lau, K.K. and M. Shariff, A. (2016) Facile fabrication of mixed matrix membranes containing 6FDA-durene polyimide and ZIF-8 nanofillers for CO2 capture. Journal of Industrial and Engineering Chemistry, 44. pp. 164-173.

Jamil, Asif and Ching, Oh Pei and Shariff, Azmi BM (2016) Current status and future prospect of polymer-layered silicate mixed-matrix membranes for CO2/CH4 separation. Chemical Engineering & Technology, 39 (8). pp. 1393-1405.

Jamil, Asif and Ching, Oh Pei and Shariff, Azmi M (2016) Minimizing morphological defects of PEI hollow fibre membrane by optimizing the dope viscosity. ARPN J. Eng. Appl. Sci, 11 (3). pp. 1687-1690.

K

Khalaji Assadi, M (2016) Enhancing the efficiency of luminescent solar concentrators (LSCs). Applied Physics A, 122 (82).

Khan, Muhammad Saad and Lal, Bhajan and Partoon, Behzad and Keong, Lau Kok and Bustam, Azmi B and Mellon, Nurhayati Bt (2016) Experimental evaluation of a novel thermodynamic inhibitor for CH4 and CO2 hydrates. Procedia engineering, 148. pp. 932-940.

Khan, Muhammad Irfan and Azizli, Khairun Azizi and Sufian, SURIATI and Man, ZAKARIA and Khan, AMIR SADA and Ullah, HAFEEZ and Siyal, AHMER ALI (2016) A Short Review of Infra-Red Spectroscopic Studies of Geopolymers. Advanced Materials Research, 1133. pp. 231-235.

KhalajiAssadi , Morteza and Safaei , Shervin (2016) Comparison of different neural network training algorithms for wind velocity forecasting. Applied Mechanics and Materials, 819. pp. 346-350. ISSN 1662-7482

Khalaji Assadi , M (2016) Can Nanofluids Lead to Commercial Usage in Solar Engineering. Industrial Engineering &Management.

Khoo, S.-W. and Karuppanan, S. and Tan, C.-S. (2016) A review of surface deformation and strain measurement using two-dimensional digital image correlation. Metrology and Measurement Systems, 23 (3). pp. 461-480.

Karim, S.A.A. (2016) Positivity preserving interpolation by using rational cubic ball spline. Jurnal Teknologi, 78 (11). pp. 141-148.

Kurnia, J.C. and Sasmito, A.P. (2016) Heat transfer performance of non-circular coiled tubes - research summary, challenges and directions. International Journal of Automotive and Mechanical Engineering, 13 (3). pp. 3710-3727.

Khan, I. and Abdelhameed, T.N.A. and Dennis, L.C.C. (2016) Heat transfer in eccentric-concentric rotation of a disk and fluid at infinity. Journal of Computational and Theoretical Nanoscience, 13 (10). pp. 6482-6487.

Khan, M.Y. and Abdul Karim, Z.A. and Aziz, A.R.A. (2016) An experimental investigation of microexplosion in bio fuel emulsion. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14303-14307.

Khan, J.A. and Al-Kayiem, H.H. and Aris, M.S. (2016) Effect of ASP flooding on oil-water stabilization and separation. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14253-14258.

Khlief, A.K. and Gilani, A.I.-U.-H. and Al-Kayiem, H.H. and Ali, B.H. (2016) Optical analysis of various reflectors applied in solar beam down tower. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14308-14312.

Krishnan, S. and Nagarajan, T. and Rani, A.M.A. and Ambaraj, W. and Ramiah, R. (2016) Rehabilitation for foot/ankle - Continuous Passive motion (CPM) using Shape Memory Alloy (SMA) actuated Stewart platform. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12908-12912.

Khan, M.M. and Mokhtar, A.A. and Hussin, H. (2016) A fuzzy-based model to determine CUI corrosion rate for carbon steel piping systems. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13325-13330.

Khan, M.M. and Mokhtar, A. and Hussin, H. (2016) Prediction for corrosion under insulation subject to carbon steel pipes using ANFIS. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 268-276.

Kadhim, S.K. and Nasif, M.S. and Al-Kayiem, H.H. and Al Waked, R. (2016) Using fluid structure interaction technique to investigate the effect of vibration on bileaflet mechanical heart valve deformation. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12192-12196.

Karuppanan, S. and Patil, S.S. (2016) Finite element analysis of stress variation along the depth of gear tooth. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12228-12233.

Kamaruddin, S. and Zakarria, N.S. and Mehat, N.M. (2016) The influence of plastic extrusion blow molding parameters on waste reduction. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12029-12032.

Khan, S.A. and Yong, S.-P. and Janjua, U.I. (2016) A comparative evaluation of features for medical image modality classification. Jurnal Teknologi, 78 (8-2). pp. 133-141.

Kinif, I. and Irawan, S. and Bharadwaj, A.M. (2016) Development and evaluation of solid control system to optimize drilling performance. Jurnal Teknologi, 78 (6-7). pp. 101-107.

Kutty, S.R.M. and Ezechi, E.H. and Khaw, S.G. and Lai, C.L. and Isa, M.H. and Salihi, I.U. (2016) Copper removal from biological treatment system using modified adsorbent derived from groundwater treatment plant sludge and rice husk. Jurnal Teknologi, 78 (5-3). pp. 53-57.

Keong, W.T. and Ahmad, F. and Sharif, S. and Moinser, M.A. (2016) Response surface methodology integrated modeling of glass fiber reinforced polymer delamination in high speed drilling. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4176-4185.

Khan, S.U. and Khan, F.U. and Khan, I.U. and Muhammad, N. and Badshah, S. and Khan, A. and Ullah, A. and Khan, A.S. and Bilal, H. and Nasrullah, A. (2016) Biosorption of nickel (II) and copper (II) ions from aqueous solution using novel biomass derived from Nannorrhops ritchiana (Mazri Palm). Desalination and Water Treatment, 57 (9). pp. 3964-3974.

Khe, C.S. and Aziz, A. and Lockman, Z. and Liu, W.W. and Lai, C.W. and Rajalingam, S. and Merican, Z. (2016) Surfactant-free synthesis of magnetic cobalt particles with hierarchical nanostructures. Digest Journal of Nanomaterials and Biostructures, 11 (2). pp. 321-327.

Khan, M.A. and Ullah, S. and Ching, D.L.C. and Khan, I. and Ullah, S. and Islam, S. and Gul, T. (2016) A mathematical study of an epidemic disease model spread by rumors. Journal of Computational and Theoretical Nanoscience, 13 (5). pp. 2856-2866.

Kurnia, J.C. and Sasmito, A.P. and Shamim, T. and Mujumdar, A.S. (2016) Numerical investigation of heat transfer and entropy generation of laminar flow in helical tubes with various cross sections. Applied Thermal Engineering, 102. pp. 849-860.

Krishnan, G. and Bidin, N. and Abdullah, M. and Ahmad, M.F.S. and Bakar, M.A.A. and Yasin, M. (2016) Liquid refractometer based mirrorless fiber optic displacement sensor. Sensors and Actuators, A: Physical, 247. pp. 227-233.

Khan, M.N.H. and Hasan, M.R. and Alam, M.K. (2016) Switching algorithm for leakage current reduction in a PV- no transformer inverter system. Indonesian Journal of Electrical Engineering and Computer Science, 4 (1). pp. 52-56.

Khezri, N. and Mohamad, H. and Fatahi, B. (2016) Stability assessment of tunnel face in a layered soil using upper bound theorem of limit analysis. Geomechanics and Engineering, 11 (4). pp. 471-492.

Karim, S.A.A. (2016) Positivity preserving interpolation by using rational cubic ball spline. Jurnal Teknologi, 78 (11). pp. 141-148.

Kurnia, J.C. and Sasmito, A.P. and Mujumdar, A.S. (2016) Thermal Performance of Coiled Square Tubes at Large Temperature Differences for Heat Exchanger Application. Heat Transfer Engineering, 37 (16). pp. 1341-1356.

Kuppusamy, C.S. and Karuppanan, S. and Patil, S.S. (2016) Buckling Strength of Corroded Pipelines with Interacting Corrosion Defects: Numerical Analysis. International Journal of Structural Stability and Dynamics, 16 (9).

Kumar, A. and Paramesran, R. and Lim, C.-L. and Dass, S.C. (2016) Tchebichef moment based restoration of Gaussian blurred images. Applied Optics, 55 (32). pp. 9006-9016.

Khan, W. and Gul, T. and Idrees, M. and Islam, S. and Khan, I. and Dennis, L.C.C. (2016) Thin film williamson Nanofluid flow with varying viscosity and thermal conductivity on a time-dependent stretching sheet. Applied Sciences (Switzerland), 6 (11).

Kermanioryani, M. and Mutalib, M.I.A. and Kurnia, K.A. and Lethesh, K.C. and Krishnan, S. and Leveque, J.-M. (2016) Enhancement of Ï�â��Ï� aromatic interactions between hydrophobic Ionic Liquids and Methylene Blue for an optimum removal efficiency and assessment of toxicity by microbiological method. Journal of Cleaner Production, 137. pp. 1149-1157.

Kutty, S.R.M. and Ezechi, E.H. and Khaw, S.G. and Lai, C.L. and Isa, M.H. (2016) Bio-physical removal of heavy metal from aqueous solution. Desalination and Water Treatment, 57 (59). pp. 28932-28938.

Kermanioryani, M. and Mutalib, M.I.A. and Dong, Y. and Lethesh, K.C. and Ben Ghanem, O.B.O. and Kurnia, K.A. and Aminuddin, N.F. and Leveque, J.-M. (2016) Physicochemical properties of new imidazolium-based ionic liquids containing aromatic group. Journal of Chemical and Engineering Data, 61 (6). pp. 2020-2026.

Kermanioryani, M. and Abdul Mutalib, M.I. and Gonfa, G. and El-Harbawi, M. and Mazlan, F.A. and Lethesh, K.C. and Leveque, J.-M. (2016) Using tunability of ionic liquids to remove methylene blue from aqueous solution. Journal of Environmental Chemical Engineering, 4 (2). pp. 2327-2332.

Khan, R.R.M. and Adnan, A. and Pervaiz, M. and Raza, M.A. and Sagir, M. and Naz, M.Y. (2016) Biodegradation of H acid by Bacillus subtilis and RP-HPLC method development for percent degradation estimation. Russian Journal of Physical Chemistry B, 10 (3). pp. 517-523.

Khan, T. and Isa, M.H. and Ul Mustafa, M.R. and Yeek-Chia, H. and Baloo, L. and Binti Abd Manan, T.S. and Saeed, M.O. (2016) Cr(VI) adsorption from aqueous solution by an agricultural waste based carbon. RSC Advances, 6 (61). pp. 56365-56374.

Kong, H. and Cheu, S.-C. and Othman, N.S. and Song, S.-T. and Saman, N. and Johari, K. and Mat, H. (2016) Surfactant modification of banana trunk as low-cost adsorbents and their high benzene adsorptive removal performance from aqueous solution. RSC Advances, 6 (29). pp. 24738-24751.

Khan, A.S. and Man, Z. and Bustam, M.A. and Kait, C.F. and Khan, M.I. and Muhammad, N. and Nasrullah, A. and Ullah, Z. and Ahmad, P. (2016) Impact of Ball-Milling Pretreatment on Pyrolysis Behavior and Kinetics of Crystalline Cellulose. Waste and Biomass Valorization, 7 (3). pp. 571-581.

Khanh, D.V.K. and Vasant, P.M. and Elamvazuthi, I. and Dieu, V.N. (2016) Collaborative simulated annealing genetic algorithm for geometric optimization of thermo-electric coolers. Studies in Computational Intelligence, 611. pp. 155-183.

Khan, Z. and Razali, R.B. and Daud, H. and Nor, N.M. and Fotuhi-Firuzabad, M. and Krebs, K.L. (2016) The computation of confidence intervals for the state parameters of power systems. SpringerPlus, 5 (1).

Kang, C.H. and Shen, C. and Saheed, M.S.M. and Mohamed, N.M. and Ng, T.K. and Ooi, B.S. and Burhanudin, Z.A. (2016) Carbon nanotube-graphene composite film as transparent conductive electrode for GaN-based light-emitting diodes. Applied Physics Letters, 109 (8).

Kashif, Salman Bin and Abdullah, Mohd Zamri and KuShaari, KuZilati (2016) CFD Modeling of N2/H2 gaseous flow with geometric variations in a monolithic channel. Procedia engineering, 148. pp. 1266-1273.

Khan, Muhammad Saad and Liew, Chin Seng and Kurnia, Kiki A and Cornelius, Bavoh and Lal, Bhajan (2016) Application of COSMO-RS in investigating ionic liquid as thermodynamic hydrate inhibitor for methane hydrate. Procedia engineering, 148. pp. 862-869.

Kurnia, Kiki Adi and Athirah, Nur Aimi and Candieiro, Fernando Juma Muzonde and Lal, Bhajan (2016) Phase behavior of ternary mixtures {aliphatic hydrocarbon+ aromatic hydrocarbon+ deep eutectic solvent}: A step forward toward â��greenerâ�� extraction process. Procedia engineering, 148. pp. 1340-1345.

Khan, Muhammad Ishaq and Zaini, Dzulkarnain and Shariff, Azmi Mohd and Moniruzzaman, Muhammad (2016) Framework for ecotoxicological risk assessment of ionic liquids. Procedia engineering, 148. pp. 1141-1148.

L

Lee, Siew-Pei and Mellon, N and Shariff, AM and Leveque, Jean-Marc (2016) Effect of Diaminopropane on Formation of Triazine-based Covalent Organic Polymer for CO2 Capture. Procedia engineering, 148. pp. 184-188.

Lai, Li Sze and Yeong, Yin Fong and Lau, K and Shariff, Azmi Mohd (2016) Gas permeation study of H2 and N2 through zeolitic imidazolate frameworks-8 membrane synthesized viamicrowave-assisted secondary solvothermal growth. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1647-1652.

Lai, Li Sze and Yeong, Yin Fong and Lau, Kok Keong and Shariff, Azmi Mohd (2016) Effect of synthesis parameters on the formation of ZIF-8 under microwave-assisted solvothermal. Procedia engineering, 148. pp. 35-42.

Lock, SSM and Lau, KK and Mei, Irene Lock Sow and Shariff, AM and Yeong, YF (2016) Succession of States Mathematical Algorithm for Incorporation of Unit Operation in iCON® Process Simulator Applied in Natural Gas Purification. Indian Journal of Science and Technology, 9. p. 38.

Lai, Li Sze and Yeong, Yin Fong and Chew, Thiam Leng and Lau, Kok Keong and Azmi, Mohd Shariff (2016) CO2 and CH4 gas permeation study via zeolitic imidazolate framework (ZIF)-8 membrane. Journal of Natural Gas Science and Engineering, 34. pp. 509-519.

Lock, SSM and Lau, KK and Mei, Irene Lock Sow and Shariff, AM and Yeong, YF (2016) Cavity energetic sizing algorithm applied in polymeric membranes for gas separation. Procedia engineering, 148. pp. 855-861.

Lemma, T.A. and Hashim, F.M. and Abd Majid, M.A.B. (2016) An integrated approach to industrial gas turbine diagnostics and reliability montoring. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7799-7805.

Low, S.-N. and Kamaruddin, S. and Azid, I.B.H.A. (2016) An integrated simulation with design on experiment approach for shop floor improvement solution selections. European Journal of Industrial Engineering, 10 (4). pp. 479-498.

Lemma, T.A. and Hashim, F.M. and Majid, M.A.B.A. (2016) Short-term and multi-state reliability model for an industrial gas turbine. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8715-8720.

Lotfi, M. and Moniruzzaman, M. and Abdul Mutalib, M.I.B. and Rajabi, M.S. (2016) Predicting the solubility of pharmaceutical compound in ionic liquids using COSMo-RS model. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1618-1622.

Lai, L.S. and Yeong, Y.F. and Lau, K. and Shariff, A.M. (2016) Gas permeation study of H2 and N2 through zeolitic imidazolate frameworks-8 membrane synthesized viamicrowave-assisted secondary solvothermal growth. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1647-1652.

Latiff, N.M.A. and NikAbdMalik, N. and Latiff, A.H.A. (2016) A green clustering protocol for mobile sensor network using particle swarm optimization. Journal of Electronic Science and Technology, 14 (2). pp. 160-169.

Lam, M.K. and Lee, K.T. and Khoo, C.G. and Uemura, Y. and Lim, J.W. (2016) Growth kinetic study of chlorella vulgaris using lab-scale and pilot-scale photobioreactor: Effect of CO2 concentration. Journal of Engineering Science and Technology, 11 (Specia). pp. 73-87.

Lim, L.G. and Pao, W.K.S. and Hamid, N.H. and Tang, T.B. (2016) Design of helical capacitance sensor for holdup measurement in two-phase stratified flow: A sinusoidal function approach. Sensors (Switzerland), 16 (7).

Lee, H.E. and Liew, M.S. and Mardi, N.H. and Na, K.L. and Toloue, I. and Wong, S.K. (2016) Development of jacket platform tsunami risk rating system in waters offshore North Borneo. Journal of Marine Science and Application, 15 (3). pp. 307-320.

Lim, C.H. and Mohammed, I.Y. and Abakr, Y.A. and Kazi, F.K. and Yusup, S. and Lam, H.L. (2016) Novel input-output prediction approach for biomass pyrolysis. Journal of Cleaner Production, 136. pp. 51-61.

Liu, W.H. and Wan Alwi, S.R. and Hashim, H. and Lim, J.S. and Mohammad Rozali, N.E. and Ho, W.S. (2016) Sizing of Hybrid Power System with varying current type using numerical probabilistic approach. Applied Energy, 184. pp. 1364-1373.

Lin, S.C. and Al-Kayiem, H.H. (2016) Evaluation of copper nanoparticles - Paraffin wax compositions for solar thermal energy storage. Solar Energy, 132. pp. 267-278.

Lai, G.T. and Reza, M.S. and Rafek, A.G. and Serasa, A.S. and Hussin, A. and Ern, L.K. (2016) Assessment of ultimate bearing capacity based on the hoek-brown failure criterion. Sains Malaysiana, 45 (11). pp. 1603-1607.

Lai, G.T. and Rafek, A.G. and Serasa, A.S. and Hussin, A. and Ern, L.K. (2016) Use of ultrasonic velocity travel time to estimate uniaxial compressive strength of granite and schist in Malaysia. Sains Malaysiana, 45 (2). pp. 185-193.

Lakshmanan, S. and Murugesan, T. (2016) Adsorption performance of coconut shell activated carbon for the removal of chlorate from chlor-alkali brine stream. Water Science and Technology, 74 (12). pp. 2819-2831.

Leong, S.Y. and Kutty, S.R.M. and Malakahmad, A. and Tan, C.K. (2016) Feasibility study of biodiesel production using lipids of Hermetia illucens larva fed with organic waste. Waste Management, 47. pp. 84-90.

Lin, S.C. and Al-Kayiem, H.H. (2016) Evaluation of copper nanoparticles - Paraffin wax compositions for solar thermal energy storage. Solar Energy, 132. pp. 267-278.

Laghari, S.M. and Isa, M.H. and Laghari, A.J. (2016) Delignification of palm fiber by microwave assisted chemical pretreatment for improving energy efficiency. Malaysian Journal of Science, 35 (1). pp. 8-14.

Losetty, V. and Wilfred, C.D. and Shekar, M.C. (2016) Synthesis and study of ionic interactions by volumetric, transport, FT-IR and computational methods of alkyl imidazolium acetate ionic liquid with molecular solvents (DMSO, DMF & EG) at TÂ =Â (293.15â��363.15) K. Journal of Molecular Liquids, 224. pp. 480-491.

Lidu, S.R. and Mohamed, N.A. and KlemeÅ¡, J.J. and Varbanov, P.S. and Yusup, S. (2016) Evaluation of the energy saving opportunities for palm oil refining process: Sahabat Oil Products (SOP) in Lahad Datu, Malaysia. Clean Technologies and Environmental Policy, 18 (8). pp. 2453-2465.

Lieu, Thanh and Yusup, Suzana and Moniruzzaman, Muhammad (2016) Kinetic study on microwave-assisted esterification of free fatty acids derived from Ceiba pentandra Seed Oil. Bioresource Technology, 211. pp. 248-256.

Lotfi, M and Moniruzzaman, M and Abdul Mutalib, MIB and Rajabi, MS (2016) Predicting the solubility of pharmaceutical compound in ionic liquids using COSMo-RS model. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1618-1622.

Lotfi, Meysam and Moniruzzaman, Muhammad and Mutalib, MI Abdul and Wilfred, Cecilia Devi and Alitheen, Noorjahan Banu and Goto, Masahiro (2016) Analysis of multiple solvation interactions of methotrexate and ammonium based ionic liquids using COSMO-RS. Procedia engineering, 148. pp. 459-466.

Lim, Lam Ghai and Pao, William KS and Hamid, Nor Hisham and Tang, Tong Boon (2016) Design of helical capacitance sensor for holdup measurement in two-phase stratified flow: A sinusoidal function approach. Sensors, 16 (7). p. 1032.

M

Maman Hermana, DP Ghosh, CW Sum, AMA Salim, . (2016) Implementation of New Seismic Attributes to Improve Reservoir Properties Prediction Using Probability Neural Network. Implementation of New Seismic Attributes to Improve Reservoir Properties Prediction Using Probability Neural Network.

Monera Adam Shoieb, Chow Weng Sum, Swapan Kumar Bhattachary, Nor, . (2016) Shale gas characterization of the Dinder and Blue Nile Formations in the Blue Nile Basin, East Sudan. Shale gas characterization of the Dinder and Blue Nile Formations in the Blue Nile Basin, East Sudan.

Manoj Joseph Mathew, David Menier, Numair Siddiqui, Shashi Gaura, . (2016) Active tectonic deformation along rejuvenated faults in tropical Borneo: Inferences obtained from tectono-geomorphic evaluation. Active tectonic deformation along rejuvenated faults in tropical Borneo: Inferences obtained from tectono-geomorphic evaluation.

Manoj Joseph Mathew, David Menier, Numair Siddiqui, Mu Ramkumar,, . (2016) Drainage basin and topographic analysis of a tropical landscape: Insights into surface and tectonic processes in northern Borneo. Drainage basin and topographic analysis of a tropical landscape: Insights into surface and tectonic processes in northern Borneo.

Mei, Irene Lock Sow and Lock, SSM and Vo, Dai-Viet N and Abdullah, Bawadi (2016) Thermo-catalytic methane decomposition for hydrogen production: Effect of palladium promoter on Ni-based catalysts. Bulletin of Chemical Reaction Engineering & Catalysis, 11 (2). pp. 191-199.

Majid, Noor Diana Abdul and Shariff, Azmi Mohd and Rusli, Risza and Azman, Khairul Imran (2016) Trade secret model based on OSHA process safety management requirement. Procedia engineering, 148. pp. 1089-1095.

Masiran, Nurliyana and Vo, Dai-Viet N and Salam, Md Abdus and Abdullah, Bawadi (2016) Improvement on coke formation of CaO-Ni/Al2O3 catalysts in ethylene production via dehydration of ethanol. Procedia engineering, 148. pp. 1289-1294.

Mansor, Nurlidia and Herng, Ho Jian and Samsudin, Sity Juaeiriah and Sufian, Suriati and Uemura, Yoshimitsu (2016) Quantification and characterization of allicin in garlic extract. Journal of Medical and Bioengineering Vol, 5 (1).

Mohshim, Dzeti Farhah and Mukhtar, Hilmi and Man, Zakaria (2016) Composite blending of ionic liquid—poly (ether sulfone) polymeric membranes: Green materials with potential for carbon dioxide/methane separation. Journal of Applied Polymer Science, 133 (39).

Mushtaq, Asim and Mukhtar, Hilmi Bin and Shariff, Azmi Mohd (2016) Effect of glass transition temperature in enhanced polymeric blend membranes. Procedia engineering, 148. pp. 11-17.

Mokri, Nurul Afiqah and Oh, Pei Ching and Chew, Thiam Leng and Mukhtar, Hilmi (2016) Synthesis of Siliceous Mesoporous Mcm-48 Via Single and Binary Surfactant System. Process Engineering and Advanced Materials; Elsevier Ltd.: Amsterdam, The Netherlands.

Mubashir, Muhammad and Yeong, Yin Fong and Lau, Kok Keong (2016) Ultrasonic-assisted secondary growth of deca-dodecasil 3 rhombohedral (DD3R) membrane and its process optimization studies in CO2/CH4 separation using response surface methodology. Journal of Natural Gas Science and Engineering, 30. pp. 50-63.

Mubashir, Muhammad and Fong, Yeong Yin and Keong, Lau Kok (2016) Synthesis of deca-dodecasil 3 rhombohedral (dd3r) membranes via secondary hydrothermal growth method and their gas permeation performance in co2 and ch4. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 11145-11149.

Mubashir, Muhammad and Fong, Yeong Yin and Keong, Lau Kok and Ting, Sam Sung (2016) CO2 adsorption study using deca-dodecasil 3 rhombohedral (DDR3) zeolite synthesized via ultrasonic irradiation coupled with hydrothermal heating method. Procedia engineering, 148. pp. 122-127.

Mannan, Hafiz Abdul and Mukhtar, Hilmi and Shahrun, Maizatul Shima and Bustam, Mohamad Azmi and Man, Zakaria and Bakar, Muhammad Zailani Abu (2016) Effect of EMIMTf2N ionic liquid on ionic liquid-polymeric membrane (ILPM) for CO2/CH4 separation. Procedia engineering, 148. pp. 25-29.

Mukhtar, H. and Mannan, H.A. and Minh, D. and Nasir, R. and Moshshim, D.F. and Murugesan, T. (2016) Polymer blend membranes for CO2 separation from natural gas. IOP Conference Series: Earth and Environmental Science, 36 (1).

Mannan, H.A. and Mukhtar, H. and Shahrun, M.S. and Bustam, M.A. and Man, Z. and Bakar, M.Z.A. (2016) Effect of EMIMTf2N Ionic Liquid on Ionic Liquid-polymeric Membrane (ILPM) for CO2/CH4 Separation. Procedia Engineering, 148. pp. 25-29.

Md Khir, M.H. and Kumar, A. and Wan Yusoff, W.I. (2016) Accelerometer Sensor Specifications to Predict Hydrocarbon Using Passive Seismic Technique. Journal of Sensors, 2016.

Matheswaran, P. and Wilfred, C.D. and Kurnia, K.A. and Ramli, A. (2016) Overview of Activity Coefficient of Thiophene at Infinite Dilution in Ionic Liquids and their Modeling Using COSMO-RS. Industrial and Engineering Chemistry Research, 55 (3). pp. 788-797.

Mahmud, A. and Bt Megat Yusoff, P.S.M. and Ahmad, F. (2016) Processing of rice husk tobio-silica nanoparticlesthrough thermal combustion. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7650-7654.

Mark Amok, J.O. and Mohamad Saad, N. (2016) Error rate performance analysis of multiantenna MC DS-CDMA system over Î·-Î¼ Frequency selective fading channels with arbitrary parameters. AEU - International Journal of Electronics and Communications, 70 (5). pp. 517-529.

Mohammed, B.S. and Aswin, M. and Beatty, W.H. and Hafiz, M. (2016) Longitudinal shear resistance of PVA-ECC composite slabs. Structures, 5. pp. 247-257.

Mahesh, K. and Nallagownden, P. and Elamvazuthi, I. (2016) Advanced Pareto front non-dominated sorting multi-objective particle swarm optimization for optimal placement and sizing of distributed generation. Energies, 9 (12).

Mansor, R. and Mat Kasim, M. and Othman, M. (2016) A weighted subsethood mamdani fuzzy rules based system rule extraction (MFRBS-WSBA) for forecasting electricity load demand - A framework. Journal of Telecommunication, Electronic and Computer Engineering, 8 (8). pp. 97-102.

Mahdi, F.P. and Vasant, P. and Kallimani, V. and Fai, P.S.Y. and Wadud, M.A. (2016) Emission dispatch problem with cubic function considering transmission loss using particle swarm optimization. Journal of Telecommunication, Electronic and Computer Engineering, 8 (12). pp. 17-21.

Mubashir, M. and Fong, Y.Y. and Keong, L.K. (2016) Synthesis of deca-dodecasil 3 rhombohedral (dd3r) membranes via secondary hydrothermal growth method and their gas permeation performance in co2 and ch4. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 11145-11149.

Muhammad, M.B and Sarwar, U. and Tahan, M.R. and Abdul Karim, Z.A. (2016) Fault diagnostic model for rotating machinery based on principal component analysis and neural network. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14327-14331.

Mohmmed, A.O. and Nasif, M.S. and Al-Kayiem, H.H. (2016) A study on slug induced stresses using file-based coupling technique. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14208-14213.

Majid, M.A.A. and Nordin, A. and Mokhtar, A.A. (2016) Exergoeconomic power cost rates model for onshore and offshore gas turbines. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14322-14326.

Muhsan, A.S. and Mohamed, N.M. and Ahmad, F. and Albarody, T.M.B. and Shahid, M.U. (2016) Effects of sintering parameters on the microstructural characteristics of cu/cnts nanocomposites. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14294-14298.

Moni, M.N.Z. and Sulaiman, S.A. and Raja, Y.S. and Karunamurthy, K. and Inayat, M. and Bou-Rabee, M.A. (2016) Investigation of the relationship between moisture content and density of selected Malaysian biomass. Journal of Mechanical Engineering and Sciences, 10 (2). pp. 2111-2125.

Mahgoub, B.K.M. and Hassan, S. and Sulaiman, S.A. and Mamat, R. and Abdul Adam, A. and Hagos, F.Y. (2016) Dual fuel combustion in a CI engine powered by blended diesel-biodiesel fuel and simulated gasification gas. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12947-12952.

Masood, R. and Gilani, S.I.U.H. and Al-Kayiem, H.H. (2016) A simplified design procedure of parabolic trough solar field for industrial heating applications. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13065-13071.

Mahmud, A. and Megat-Yusoff, P.S.M. and Ahmad, F. and Farezzuan, A.A. (2016) Acid leaching as efficient chemical treatment for rice husk in production of amorphous silica nanoparticles. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13384-13388.

Mokhtar, A.A. and Misren, M.M. and Muhammad, M. and Hussin, H. (2016) RAM analysis of crude oil transfer pumps using dominant failure mode. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13348-13352.

Mohd. Nor, M.F. and Hassan, S. and Zakariya, A. and Fadzil, F.A. (2016) Preliminary study of renewable Pico-Mini hydro electrification in Royal Belum, Perak. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13313-13318.

Meyghani, B. and Awang, M. and Emamian, S. (2016) A comparative study of finite element analysis for friction stir welding application. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12984-12989.

Mulubrhan, F. and Mokhtar, A.A.B. and Muhammad, M. (2016) Replacement analysis using probabilistic life cycle costing. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13042-13048.

Mohamed Ibrahim, M. and Hassan, M.F. (2016) Construction of customizable soa security framework using artificial neural networks. Jurnal Teknologi, 78 (12-3). pp. 69-75.

Mohyaldinn, M.E. and Hamid, R. and Adil, M. and Musa, O. (2016) Study of the effect of flow modifiers on the operation of Heglig-Port Sudan Pipeline. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 259-267.

Moayedfar, M. and Rani, A.M.A. and Emamian, S.S. and Haghighizadeh, A. and Jafari, N. (2016) Manufacture of medical orthopaedic implants using computed tomography imaging and rapid prototyping. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 177-180.

Mushtaq, S. and Baharom, M.B. (2016) Electromagnets arrangement for electromagnetic windshield wipers - Proposal and analysis. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 150-154.

Mohammed, B.S. and Nuruddin, M.F. and Aswin, M. and Mahamood, N. and Al-Mattarneh, H. (2016) Structural Behavior of Reinforced Self-Compacted Engineered Cementitious Composite Beams. Advances in Materials Science and Engineering, 2016.

Mohammad Rozali, N.E. and Wan Alwi, S.R. and Manan, Z.A. and KlemeÅ¡, J.J. (2016) Sensitivity analysis of hybrid power systems using Power Pinch Analysis considering Feed-in Tariff. Energy, 116. pp. 1260-1268.

Mengal, A.N. and Karuppanan, S. and Farhood, N.H. (2016) Compressive behaviour of basalt FRP and basalt-carbon hybrid frp laminates. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11994-11998.

Mahmoud, H.R.S. and Hussain, P.B. and Ismail, M.C. (2016) Surface properties of nitrided layer on aisi 316l austenitic stainless steel produced by varied time low-temperature thermochemical treatments. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12099-12102.

Mauliddin, D.S. and Ginta, T.L. (2016) The effect of repeated welding cycles on the microstructure and ferrite content of 25cr super duplex stainless steel weld metal by automatic orbital tig welding. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11982-11987.

Mohammad, S.T. and Al-Kayiem, H.H. and Assadi, M.K. (2016) Developed mathematical model of solar thermal parabolic trough power plant at universiti teknologi petronas. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12140-12145.

Mailabari, R.J. and Mamat, O. and Baig, Z. (2016) Dispersion of carbon black in epoxy resin and the electrical property of the nanocomposite. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12176-12180.

Mohammed, S.E. and Baharom, M.B. and Rashid, A. and Aziz, A. (2016) Thermodynamic analysis of a single cylinder crank-rocker engine. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12239-12246.

Mian, M.U. and Dennis, J.O. and Khir, M.H.B.M. and Ahmed, M.G.A. and Rabih, A.A.S. and Tang, T.B. (2016) Optical and capacitive characterization of MEMS magnetic resonator. IEICE Electronics Express, 13 (18).

Mohamad, H. and Tee, B.P. and Ang, K.A. and Chong, M.F. (2016) Characterizing anomalies in distributed strain measurements of cast-in-situ bored piles. Jurnal Teknologi, 78 (8-5). pp. 75-82.

Mohan Kudiri, K. and Md. Said, A. and Nayan, M.Y. (2016) Hybrid fusion of face and speech information for bimodal emotion estimation. Jurnal Teknologi, 78 (8-2). pp. 26-34.

Majid, M.A.A. and Fudzin, F. and Mokhtar, A.A. (2016) Replacement model for robots in automotive assembly plant. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8562-8567.

Mauliddin, D.S. and Ginta, T.L. (2016) The effect of repeated welding cycles on the properties of 25Cr super duplex stainless steel by automatic orbital TIG welding. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8754-8758.

Muzammel, M. and Yusoff, M.Y. and Saad, M.N.M. and Malik, A.S. (2016) Audio visual tracking of a speaker based on FFT and Kalman filter. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8947-8951.

Mamat, O. and Mailabari, R.J. (2016) Characterization and production of conductive filler from oil palm ash and its performance in epoxy matrix. International Journal of Engineering and Technology, 8 (2). pp. 966-973.

Masood, R. and Gilani, S.I.U.-H. and Al-Kayiem, H.H. (2016) Thermal output analysis of a designed parabolic trough solar field for moderate temperature industrial load. International Journal of Engineering and Technology, 8 (2). pp. 1018-1024.

Muhammad, G. and Altuwaijri, G. and Alsulaiman, M. and Ali, Z. and Mesallam, T.A. and Farahat, M. and Malki, K.H. and Al-Nasheri, A. (2016) Automatic voice pathology detection and classification using vocal tract area irregularity. Biocybernetics and Biomedical Engineering, 36 (2). pp. 309-317.

Mohammed, S.E. and Baharom, M.B. and Aziz, A.R.A. (2016) The effect of rocker ratio and connecting rod length on the performance of a crank-rocker mechanism with an extended rocker input link. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4221-4227.

Memon, M.B. and Osman, S.B.A.B.S. and Qazi, W.H. (2016) Effects of shear strength properties on electrical resistivity of compacted laterite soil: A conceptual model. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3663-3667.

Memon, I.A. and Napiah, M. and Talpur, M.A.H. and Hakro, M.R. (2016) Mode choice modelling method to shift car travelers towards park and ride service. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3677-3683.

Mustafa, M.R. (2016) Modeling daily suspended sediments of a hyper-concentrated river in Malaysia. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2141-2145.

Matcha, W. and Rambli, D.R.A. (2016) Time on task for collaborative augmented reality in science experiment. Jurnal Teknologi, 78 (2-2). pp. 137-144.

Mohammed, B.S. and Nuruddin, M.F. and Yogeswary, A. and Dayalan, P. (2016) Properties of high permeable concrete utilizing pozzolanic materials. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1457-1466.

Muthusamy, Y. and Kadirgama, K. and Rahman, M.M. and Ramasamy, D. and Sharma, K.V. (2016) Wear analysis when machining AISI 304 with ethylene glycol/TIO2 nanoparticle-based coolant. International Journal of Advanced Manufacturing Technology, 82 (1-4). pp. 327-340.

Mohammed, B.S. and Aswin, M. and Beatty, W.H. and Hafiz, M. (2016) Longitudinal shear resistance of PVA-ECC composite slabs. Structures, 5. pp. 247-257.

Mohammed, B.S. and Awang, A.B. and Wong, S.S. and Nhavene, C.P. (2016) Properties of nano silica modified rubbercrete. Journal of Cleaner Production, 119. pp. 66-75.

Mohamed, N.M. and Irshad, M.I. and Abdullah, M.Z. and Saheed, M.S.M. (2016) Novel growth of carbon nanotubes on nickel nanowires. Diamond and Related Materials, 65. pp. 59-64.

Mahmood, H. and Moniruzzaman, M. and Yusup, S. and Akil, H.M. (2016) Pretreatment of oil palm biomass with ionic liquids: A new approach for fabrication of green composite board. Journal of Cleaner Production, 126. pp. 677-685.

Mohammad Rozali, N.E. and Wan Alwi, S.R. and Ho, W.S. and Manan, Z.A. and KlemeÅ¡, J.J. (2016) Integration of diesel plant into a hybrid power system using power pinch analysis. Applied Thermal Engineering, 105. pp. 792-798.

Mohmmed, A.O. and Nasif, M.S. and Al-Kayiem, H.H. and Time, R.W. (2016) Measurements of translational slug velocity and slug length using an image processing technique. Flow Measurement and Instrumentation, 50. pp. 112-120.

Miya, H.S. and Ibrahim, R.B. and Saad, N.B. and Asirvadam, V.S. and Chung, T.D. (2016) WirelessHART process control with smith predictor compensator. Advanced Science Letters, 22 (10). pp. 2676-2680.

Muhammad, M.M. and Alias, M.N. and Yusof, K.W. and Mustafa, M.R.U. and Ghani, A.A. (2016) Suitability of bioengineering channels in erosion control: Application to urban stormwater drainage systems. Advances and Applications in Fluid Mechanics, 19 (4). pp. 765-785.

Mohammed, I.Y. and Abakr, Y.A. and Musa, M. and Yusup, S. and Singh, A. and Kazi, F.K. (2016) Valorization of Bambara groundnut shell via intermediate pyrolysis: Products distribution and characterization. Journal of Cleaner Production, 139. pp. 717-728.

Mustafa, M.R. (2016) Modeling daily suspended sediments of a hyper-concentrated river in Malaysia. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2141-2145.

Mushtaq, S. and Baharom, M.B. (2016) Electromagnets arrangement for electromagnetic windshield wipers - Proposal and analysis. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 150-154.

Mulubrhan, F. and Mokhtar, A.A.B. and Muhammad, M. (2016) Replacement analysis using probabilistic life cycle costing. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13042-13048.

Mohan Kudiri, K. and Md. Said, A. and Nayan, M.Y. (2016) Hybrid fusion of face and speech information for bimodal emotion estimation. Jurnal Teknologi, 78 (8-2). pp. 26-34.

Mohammed, B.S. and Awang, A.B. and Wong, S.S. and Nhavene, C.P. (2016) Properties of nano silica modified rubbercrete. Journal of Cleaner Production, 119. pp. 66-75.

Mohammed, B.S. and Aswin, M. and Beatty, W.H. and Hafiz, M. (2016) Longitudinal shear resistance of PVA-ECC composite slabs. Structures, 5. pp. 247-257.

Mohamed, N.M. and Irshad, M.I. and Abdullah, M.Z. and Saheed, M.S.M. (2016) Novel growth of carbon nanotubes on nickel nanowires. Diamond and Related Materials, 65. pp. 59-64.

Mohamed Ibrahim, M. and Hassan, M.F. (2016) Construction of customizable soa security framework using artificial neural networks. Jurnal Teknologi, 78 (12-3). pp. 69-75.

Mohamad, H. and Tee, B.P. and Ang, K.A. and Chong, M.F. (2016) Characterizing anomalies in distributed strain measurements of cast-in-situ bored piles. Jurnal Teknologi, 78 (8-5). pp. 75-82.

Matcha, W. and Rambli, D.R.A. (2016) Time on task for collaborative augmented reality in science experiment. Jurnal Teknologi, 78 (2-2). pp. 137-144.

Majid, M.A.A. and Fudzin, F. and Mokhtar, A.A. (2016) Replacement model for robots in automotive assembly plant. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8562-8567.

Memon, M.A. and Nor, K.M. and Salleh, R. (2016) Personality Traits Influencing Knowledge Sharing in Student-Supervisor Relationship: A Structural Equation Modelling Analysis. Journal of Information and Knowledge Management, 15 (2).

Milano, J. and Ong, H.C. and Masjuki, H.H. and Chong, W.T. and Lam, M.K. and Loh, P.K. and Vellayan, V. (2016) Microalgae biofuels as an alternative to fossil fuel for power generation. Renewable and Sustainable Energy Reviews, 58. pp. 180-197.

Muhammad, N. and Gao, Y. and Iqbal, F. and Ahmad, P. and Ge, R. and Nishan, U. and Rahim, A. and Gonfa, G. and Ullah, Z. (2016) Extraction of biocompatible hydroxyapatite from fish scales using novel approach of ionic liquid pretreatment. Separation and Purification Technology, 161. pp. 129-135.

Mohammad Rozali, N.E. and Wan Alwi, S.R. and Manan, Z.A. and KlemeÅ¡, J.J. (2016) Process Integration for Hybrid Power System supply planning and demand management â�� A review. Renewable and Sustainable Energy Reviews, 66. pp. 834-842.

Menier, D. and EstournÃ¨s, G. and Mathew, M.J. and Ramkumar, M. and Briend, C. and Siddiqui, N. and Traini, C. and Pian, S. and Labeyrie, L. (2016) Relict geomorphological and structural control on the coastal sediment partitioning, North of Bay of Biscay. Zeitschrift fur Geomorphologie, 60 (1). pp. 67-74.

Mohammed, B.S. and Aswin, M. and Beatty, W.H. and Hafiz, M. (2016) Longitudinal shear resistance of PVA-ECC composite slabs. Structures, 5. pp. 247-257.

Meng, C.C. and Pubellier, M. and Abdeldayem, A. and Sum, C.W. (2016) Deformation styles and structural history of the paleozoic limestone, kinta valley, Perak, Malaysia. Bulletin of the Geological Society of Malaysia, 62. pp. 37-45.

Moradi, B. and Ayoub, M. and Awang, M. (2016) Modification of Ramey's model for carbon dioxide injection in the vicinity of critical point. Journal of CO2 Utilization, 16. pp. 218-224.

Mulyani, S. and Hassan, R. and Anugrah, F. (2016) The critical success factors for the use of information systems and its impact on the organizational performance. International Business Management, 10 (4). pp. 552-560.

Mandal, P.C. and Nagarajan, T. (2016) Kinetics and reaction pathways of total acid number reduction of cyclopentane carboxylic acid using subcritical methanol. Polish Journal of Chemical Technology, 18 (3). pp. 44-49.

Mahat, Siti Qurratuâ�� Aini and Saaid, Ismail Mohd and Lal, Bhajan (2016) Green silica scale inhibitors for Alkaline-Surfactant-Polymer flooding: a review. Journal of Petroleum Exploration and Production Technology, 6. pp. 379-385.

Mahmood, Hamayoun and Moniruzzaman, Muhammad and Yusup, Suzana and Akil, Hazizan Md (2016) Particulate composites based on ionic liquid-treated oil palm fiber and thermoplastic starch adhesive. Clean Technologies and Environmental Policy, 18. pp. 2217-2226.

Mahmood, Hamayoun and Moniruzzaman, Muhammad and Yusup, Suzana and Khan, Mohammad Ilyas and Khan, Maria Jafar (2016) Kinetic modeling and optimization of biomass pyrolysis for bio-oil production. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 38 (14). pp. 2065-2071.

Mahmood, Hamayoun and Moniruzzaman, Muhammad and Yusup, Suzana and Akil, Hazizan Md (2016) Pretreatment of oil palm biomass with ionic liquids: a new approach for fabrication of green composite board. Journal of Cleaner Production, 126. pp. 677-685.

Mian, Muhammad U and Dennis, John O and Khir, Mohd HBM and Ahmed, Mawahib GA and Rabih, Almur AS and Tang, Tong Boon (2016) Optical and capacitive characterization of MEMS magnetic resonator. IEICE Electronics Express, 13 (18). p. 20160773.

Moria, Hazim and Mohamad, Taib Iskandar and Aldawi, Fayez (2016) Radiation distribution uniformization by optimized halogen lamps arrangement for a solar simulator. J Sci Eng Res, 3. pp. 29-34.

Mohamad, T and Abdul Rasid, A (2016) Improvement of Full-Load Performance of an Automotive Engine Using Adaptive Valve Lift and Timing Mechanism. Advances in Automobile Engineering, 5 (02).

N

Numair Ahmed Siddiqui, Mohamed Ali EL-Ghali, Abdul Hadi bin Abd , . (2016) Depositional Environment of Shallow-Marine Sandstones from Outcrop Gamma-Ray Logs, Belait Formation, Meragang Beach, Brunei Darussalam. Depositional Environment of Shallow-Marine Sandstones from Outcrop Gamma-Ray Logs, Belait Formation, Meragang Beach, Brunei Darussalam.

Norbert Simon, Rodeano Roslee, Abdul Ghani Rafek, Goh Thian Lai,, . (2016) Rock Mass Assessment using Geological Strength Index (GSI) along the Ranau-Tambunan Road, Sabah, Malaysia. Rock Mass Assessment using Geological Strength Index (GSI) along the Ranau-Tambunan Road, Sabah, Malaysia.

Numair A Siddiqui, Abdul Hadi A Rahman, Chow W Sum, Manoj J Math, . (2016) Onshore sandstone facies characteristics and reservoir quality of Nyalau Formation, Sarawak, East Malaysia: an analogue to subsurface reservoir quality evaluation. Onshore sandstone facies characteristics and reservoir quality of Nyalau Formation, Sarawak, East Malaysia: an analogue to subsurface reservoir quality evaluation.

Nasir, Rizwan and Mukhtar, Hilmi and Man, Zakaria (2016) Prediction of gas transport across amine mixed matrix membranes with ideal morphologies based on the Maxwell model. RSC advances, 6 (36). pp. 30130-30138.

Nedaei, Mojtaba and Ataei, Abtin and Adaramola, Muyiwa Samuel and Hajiseyed Mirzahosseini, Alireza and Khalaji Assadi, Morteza and Assareh, Ehsanolah (2016) Comparative analysis of three numerical methods for estimating the onshore wind power in a coastal area. INTERNATIONAL JOURNAL OF AMBIENT ENERGY, 2016.

Nasir, R. and Mukhtar, H. and Man, Z. (2016) Prediction of gas transport across amine mixed matrix membranes with ideal morphologies based on the Maxwell model. RSC Advances, 6 (36). pp. 30130-30138.

Nawaz, F. and Jeoti, V. (2016) GREEN protocol: gradient based energy efficient routing with network coding capacity. Telecommunication Systems, 62 (1). pp. 135-147.

Noor, N.F.M. and Awang, M. (2016) Overview of underwater friction stir welding. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14319-14321.

Nordin, A. and Majid, M.A.A. (2016) Parametric study on the effects of pinch and approach points on heat recovery steam generator performance at a district cooling system. Journal of Mechanical Engineering and Sciences, 10 (2). pp. 2134-2144.

Negash, B.M. and Tufa, L.D. and Marappagounder, R. and Awang, M.B. (2016) Performance prediction of a reservoir under gas injection, using output error model. Contemporary Engineering Sciences, 9 (29-32). pp. 1479-1489.

Nik Yusoff, N.H. and Mamat, O. and Isa, M.C. (2016) Electrode position of nickel-cobalt/alumina (Ni-Co/Al2O3) composite coatings: A current approach. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13331-13337.

Nasif, M.S. and Fekry, M. and Ismail, F.B. (2016) CFD investigation on the effect of varying fire sprinkler orientation on sprinkler activation time. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12919-12922.

Niazi, U.M. and Nasif, M.S. and Bin Muhammad, M. and Imran, M. (2016) Modeling of pool fire and injury prediction considering different wind speeds and directions in offshore platform. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13000-13005.

Nasif, M.S. and Roslan, R. (2016) Effect of varying roof run-off coefficient values and tank size on rainwater harvesting system's water savings in Malaysia. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12937-12941.

Noor, A.M.Z. and Sara, T. and Maizatul, S.S. (2016) Effects of Nb promoter on the properties of Cu/ZnO/SBA-15 catalyst and performance in methanol production. Key Engineering Materials, 708. pp. 94-97.

Nasif, M.S. and Kadhim, S.K. and Al-Kayiem, H.H. and Al Waked, R. (2016) Using one way fluid structure interaction coupling to investigate the effect of blood flow on the bileaflet mechanical heart valve structure. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11971-11973.

Nordin, N. and Karim, Z.A.A. and Othman, S. and Raghavan, V.R. and Seri, S.M. and Shaari, M.F. and Adzila, S. (2016) Validation by piv of the numerical study of flow in the two-dimensional turning diffuser. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11948-11953.

Nor, M.A.M. and Al-Kayiem, H.H. and Lemma, T.A. (2016) CFD analysis of swirly flow field in conical and cylindrical cyclones for deoiling applications. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12262-12267.

Naziatul Shima, A.A. and Wan Fatimah, W.A. and Ahmad Sobri, H. (2016) The design of mobile numerical application development lifecyle for children with autism. Jurnal Teknologi, 78 (9-3). pp. 13-20.

Nadeesha Chandraseana, D.C. and Wan Yusof, K. and Ul Mustafa, M.R. and Mustaffa, Z. and Umar, S.I. (2016) A theoretical discussion and case study on the development of smart storm drainage unit for compact cities. Jurnal Teknologi, 78 (5-3). pp. 85-90.

Nishanth, R. and John, K.V. and Whyte, A. (2016) Dynamic behaviour of FPSO in Kikeh field under different loading conditions. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2302-2307.

Namazi-Saleh, F. and John, K.V. and Bt. Mustaffa, Z. (2016) Numerical evaluation of galerkin finite volume solver for laminar/turbulent flow over flat plate. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2393-2399.

Nasir Shah, S. and Kallidanthiyil Chellappan, L. and Gonfa, G. and Mutalib, M.I.A. and Pilus, R.B.M. and Bustam, M.A. (2016) Extraction of naphthenic acid from highly acidic oil using phenolate based ionic liquids. Chemical Engineering Journal, 284. pp. 487-493.

Naz, M.Y. and Shukrullah, S. and Ghaffar, A. and Rehman, N.U. and Khan, Y. (2016) Test of a new tip material for Langmuir probe diagnostic. Journal of Applied Mechanics and Technical Physics, 57 (2). pp. 211-218.

Nasrullah, A. and Khan, H. and Khan, A.S. and Muhammad, N. and Man, Z. and Khan, F.U. and Ullah, Z. (2016) Calligonum polygonoides biomass as a low-cost adsorbent: surface characterization and methylene blue adsorption characteristics. Desalination and Water Treatment, 57 (16). pp. 7345-7357.

Nawaz, F. and Jeoti, V. (2016) GREEN protocol: gradient based energy efficient routing with network coding capacity. Telecommunication Systems, 62 (1). pp. 135-147.

Ng, Z.-G. and Lim, J.-W. and Daud, H. and Ng, S.-L. and Bashir, M.J.K. (2016) Reassessment of adsorption-reduction mechanism of hexavalent chromium in attaining practicable mechanistic kinetic model. Process Safety and Environmental Protection, 102. pp. 98-105.

Narahari, M. and Kamran, M. (2016) MHD natural convection flow past an impulsively started infinite vertical porous plate with Newtonian heating in the presence of radiation. International Journal of Numerical Methods for Heat and Fluid Flow, 26 (6). pp. 1932-1953.

Naz, M.Y. and Shukrullah, S. and Sulaiman, S.A. and Najeeb-Ur-Rehman and Khan, Y. and Ghaffar, A. and Ullah, S. (2016) Investigations on spatial distribution of low temperature plasma parameters using NiCr wire probe diagnostic. Measurement: Journal of the International Measurement Confederation, 91. pp. 194-200.

Nurika, O. and Hassan, M.F. and Zakaria, N. and Jung, L.T. (2016) Genetic algorithm optimized receiver-oriented packet clustering in multi-buffer network card. Advanced Science Letters, 22 (10). pp. 2914-2917.

Nurika, O. and Hassan, M.F. and Zakaria, N. and Jung, L.T. (2016) Genetic algorithm optimized network in cloud data centre. Advanced Science Letters, 22 (10). pp. 2705-2709.

Noor, N.F.M. and Awang, M. (2016) Overview of underwater friction stir welding. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14319-14321.

Nawaz, F. and Jeoti, V. (2016) GREEN protocol: gradient based energy efficient routing with network coding capacity. Telecommunication Systems, 62 (1). pp. 135-147.

Nazif, A. and Mohammed, N.I. and Malakahmad, A. and Abualqumboz, M.S. (2016) Application of Step Wise Regression Analysis in Predicting Future Particulate Matter Concentration Episode. Water, Air, and Soil Pollution, 227 (4).

Nawaz, F. and Jeoti, V. (2016) GREEN protocol: gradient based energy efficient routing with network coding capacity. Telecommunication Systems, 62 (1). pp. 135-147.

Naz, M.Y. and Shukrullah, S. and Ghaffar, A. and Rehman, N.U. and Sagir, M. (2016) A Low-Frequency Dielectric Barrier Discharge System Design for Textile Treatment. Synthesis and Reactivity in Inorganic, Metal-Organic and Nano-Metal Chemistry, 46 (1). pp. 104-109.

Naz, M.Y. and Ismail, N.I. and Sulaiman, S.A. and Shukrullah, S. (2016) ABRASIVE EROSION STUDY on S45C CARBON STEEL USING SAND BLASTING TECHNIQUE. Surface Review and Letters, 23 (5).

Nasvi, M.C.M. and Rathnaweera, T.D. and Padmanabhan, E. (2016) Geopolymer as well cement and its mechanical integrity under deep down-hole stress conditions: application for carbon capture and storage wells. Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 2 (4). pp. 245-256.

Nashed, Omar and Koh, Josephine Chin Hui and Lal, Bhajan (2016) Physical-chemical properties of aqueous TBAOH solution for gas hydrates promotion. Procedia engineering, 148. pp. 1351-1356.

Nahar, Nazmun and Rahman, Muhammad Shahedur and Rahman, Shaikh Mizanur and Moniruzzaman, Muhammad (2016) GC-MS analysis and antibacterial activity of Trigonella foenumgraecum against bacterial pathogens. Free Radicals and Antioxidants, 6 (1). pp. 109-113.

O

Osama Akhtar Janjua, Ali Wahid, Ahmed Mohamed Ahmed Salim, M Nas, . (2016) Prospect evaluation of shallow I-35 reservoir of NE Malay Basin offshore, Terengganu, Malaysia. Prospect evaluation of shallow I-35 reservoir of NE Malay Basin offshore, Terengganu, Malaysia.

Omoregbe, Osaze and Danh, Huong T and Abidin, SZ and Setiabudi, HD and Abdullah, Bawadi and Vu, Khanh B and Vo, Dai-Viet N (2016) Influence of lanthanide promoters on Ni/SBA-15 catalysts for syngas production by methane dry reforming. Procedia engineering, 148. pp. 1388-1395.

Owolabi, Afolabi L. and Hussain , H. Al-Kayiem and Baheta , Aklilu Tesfamichael (2016) Nanoadditives induced enhancement of the thermal properties of paraffin-based nanocomposites for thermal energy storage. Solar Energy , 135.

Ooi Phey Chee, Siti Nur Fathiyah Jamaludin, Askury Abd Kadir, . (2016) STRUCTURAL INTERPRETATION OF FRACTURED BASEMENT IN MALAY BASIN, PENINSULAR MALAYSIA. STRUCTURAL INTERPRETATION OF FRACTURED BASEMENT IN MALAY BASIN, PENINSULAR MALAYSIA.

Olisa, E. and Sapari, N. and Malakahmad, A. and Ezechi, E.H. and Riahi, A. (2016) Enhancing landfill gas recovery- A review. Jurnal Teknologi, 78 (5-2). pp. 105-109.

Osman, S.B.S. and Jusoh, H. and Abdul, H. (2016) Behavior of electrical resistivity in sandy clay loam soil with respect to its strength parameters. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 5433-5438.

Opatola, R.A. and Aziz, A.R.A. and Heikal, M.R. and Said, M.A.M. (2016) Towards mitigating engine-out emissions: A migration to fuel based and combustion based solutions. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13435-13440.

Osman, A.B. and Ovinis, M. and Osei, H. and Hashim, F.M. (2016) A review of optical flow models applied for fluid motion estimation. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12181-12186.

Osei, H. and Al-Kayiem, H.H. and Osman, A.B. (2016) Flow dynamics behaviour of a novel liquid-liquid hydrocyclone with varying upper cylindrical lengths and number of inlets. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12159-12164.

Othman, A.R. and Jadee, K.J. (2016) Specific bearing strength of bolted composite joint with different glass fiber reinforcement. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12039-12044.

Olisa, E. and Sapari, N. and Malakahmad, A. and Ezechi, E.H. and Riahi, A. and Salihi, I.U. and Orji, K.U. (2016) Evaluation of leachate characteristics from different leachate ponds in a semi-aerobic landfill. International Journal of Engineering Research in Africa, 22. pp. 68-82.

Omer, M.A. and Rao, T.V.V.L.N. (2016) Effect of additive volume fraction on a fluid film pressure and load of hydrodynamic journal bearing using ferromagnetic fluid. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4203-4207.

Ooi, B.L. and Gilbert, J.M. and Aziz, A.R.A. (2016) Analytical and finite-element study of optimal strain distribution in various beam shapes for energy harvesting applications. Acta Mechanica Sinica/Lixue Xuebao, 32 (4). pp. 670-683.

Ozdokur, K.V. and Moniruzzaman, M. and Yanik, J. and Ono, T. (2016) Synthesis and characterization of a polyoxometalate-based ionic liquid catalyst for delignification of wood biomass. Wood Science and Technology, 50 (6). pp. 1213-1226.

Osman, A. and Muhammad Yusof, M.K.A. and Rafi, M. (2016) Vehicle Testing and Development Involving a Simplified Split Cooling with Integrated Exhaust Heat Recovery and Reuse. SAE Technical Papers.

Osman, A. and Mutalib, M.I.A. and Shigidi, I. (2016) Heat recovery enhancement in HENs using a combinatorial approach of paths combination and process streamsâ�� temperature flexibility. South African Journal of Chemical Engineering, 21. pp. 37-48.

Owolabi, A.L. and Al-Kayiem, H.H. and Baheta, A.T. (2016) Nanoadditives induced enhancement of the thermal properties of paraffin-based nanocomposites for thermal energy storage. Solar Energy, 135. pp. 644-653.

Ozdokur, Kemal Volkan and Moniruzzaman, Muhammad and Yanik, Jale and Ono, Tsutomu (2016) Synthesis and characterization of a polyoxometalate-based ionic liquid catalyst for delignification of wood biomass. Wood Science and Technology, 50. pp. 1213-1226.

P

Pham, Loi Hoang Huy Phuoc and Rusli, Risza (2016) A review of experimental and modelling methods for accidental release behaviour of high-pressurised CO2 pipelines at atmospheric environment. Process Safety and Environmental Protection, 104. pp. 48-84.

Pham, Loi Hoang Huy Phuoc and Rusli, Risza and Keong, Lau Kok (2016) Consequence study of CO2 leakage from ocean storage. Procedia engineering, 148. pp. 1081-1088.

Partoon, Behzad and Sabil, Khalik M and Roslan, Hariz and Lal, Bhajan and Keong, Lau Kok (2016) Impact of acetone on phase boundary of methane and carbon dioxide mixed hydrates. Fluid Phase Equilibria, 412. pp. 51-56.

Pham, Loi Hoang Huy Phuoc and Rusli, Risza and Keong, Lau Kok (2016) Consequence study of CO2 leakage from ocean storage. Procedia engineering, 148. pp. 1081-1088.

Pao, William and Hashim, Fakhruldin and Baheta, Aklilu Tesfamichael (2016) Hydrate Formation in Two Phase Flow in Pipe. Applied Mechanics and Materials, 819. pp. 295-299.

Pham, L.H.H.P. and Rusli, R. (2016) A review of experimental and modelling methods for accidental release behaviour of high-pressurised CO2 pipelines at atmospheric environment. Process Safety and Environmental Protection, 104. pp. 48-84.

Pasha, M. and Zaini, D. and Shariff, A.M. (2016) Explosion potential assessment of heat exchanger network at the preliminary design stage. Journal of Engineering Science and Technology, 11 (Specia). pp. 30-42.

Prasanth Kumar, B. and Rao, T.V.V.L.N. and Baharom, M. (2016) Microstructure based finite element analysis for deformation behavior of magnesium based composites. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12967-12972.

Pal, A. and El-Sharkawy, I.I. and Saha, B.B. and Habib, K. and Miyazaki, T. and Koyama, S. (2016) Thermodynamic analysis of adsorption cooling cycle using consolidated composite adsorbents - ethanol pairs. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12234-12238.

Parman, S. and Zainuddin, E. (2016) Design and analysis of hydraulic in a heavy commercial vehicle by recovering energy during braking. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11999-12004.

Pao, W. and Sam, B. and Nasif, M.S. (2016) Simulation of two phase oil-gas flow in pipeline. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4208-4213.

Pau, J.S. and Pao, W. and Yong, S.P. (2016) CO2 flow in saline aquifer with salt precipitation. International Journal of Numerical Methods for Heat and Fluid Flow, 26 (1). pp. 122-145.

Patil, S.S. and Karuppanan, S. and Atanasovska, I. (2016) Experimental measurement of strain and stress state at the contacting helical gear pairs. Measurement: Journal of the International Measurement Confederation, 82. pp. 313-322.

Park, K.S. and Kim, Y.T. and Kim, D.K. and Yu, S.Y. and Choi, H.S. (2016) A new method for strake configuration design of Steel Catenary Risers. Ships and Offshore Structures, 11 (4). pp. 385-404.

Pau, J.S. and Pao, W. and Yong, S.P. (2016) CO2 flow in saline aquifer with salt precipitation. International Journal of Numerical Methods for Heat and Fluid Flow, 26 (1). pp. 122-145.

Park, K.S. and Kim, Y.T. and Kim, D.K. and Yu, S.Y. and Choi, H.S. (2016) A new method for strake configuration design of Steel Catenary Risers. Ships and Offshore Structures, 11 (4). pp. 385-404.

Pao, W. and Sam, B. and Nasif, M.S. (2016) Simulation of two phase oil-gas flow in pipeline. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4208-4213.

Partoon, B. and Sabil, K.M. and Roslan, H. and Lal, B. and Keong, L.K. (2016) Impact of acetone on phase boundary of methane and carbon dioxide mixed hydrates. Fluid Phase Equilibria, 412. pp. 51-56.

Park, K.S. and Kim, Y.T. and Kim, D.K. and Yu, S.Y. and Choi, H.S. (2016) A new method for strake configuration design of Steel Catenary Risers. Ships and Offshore Structures, 11 (4). pp. 385-404.

Prajapati, S. and Kukarina, E. and Mishra, S. (2016) Crustal seismic structure beneath the Deccan Traps area (Gujarat, India), from local travel-time tomography. Tectonophysics, 672-67. pp. 139-149.

Partoon, Behzad and Nashed, Omar and Kassim, Zamzila and Sabil, Khalik M and Sangwai, Jitendra and Lal, Bhajan (2016) Gas Hydrate Equilibrium measurement of methane+ carbon dioxide+ tetrahydrofuran+ water system at high CO2 concentrations. Procedia engineering, 148. pp. 1220-1224.

Q

Qadir, Danial and Mukhtar, Hilmi B and Keong, Lau K (2016) Sustainable Environment Research.

Qadir, Danial and Mukhtar, Hilmi and Keong, Lau Kok (2016) Synthesis and characterization of polyethersulfone/carbon molecular sieve based mixed matrix membranes for water treatment applications. Procedia engineering, 148. pp. 588-593.

Qadir, Danial and Mukhtar, Hilmi B and Keong, Lau K (2016) Sustainable Environment Research.

Qayyum, J.A. and Altaf, K. and Mahmood, A. and Shah, M. and Rani, A.M.A. (2016) Grain refinement of LM25 Aluminum alloy casting using sloping plate process. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13049-13052.

Qazi, W.H. and Osman, S.B.A.B.S. and Memon, M.B. (2016) Prediction of soil engineering properties using electrical resistivity values at controlled moisture content- A conceptual paper. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3684-3689.

Quek, L.X. and Ghant, A.A. and Saidin, M. and Harith, Z.Z.T. (2016) Durbachite-like melagranite in taiping pluton of bintang batholith, Peninsular Malaysia. Bulletin of the Geological Society of Malaysia, 62. pp. 1-6.

R

Rosyadah Ahmad, N.N. and Mukhtar, H. and Mohshim, D.F. and Nasir, R. and Man, Z. (2016) Surface modification in inorganic filler of mixed matrix membrane for enhancing the gas separation performance. Reviews in Chemical Engineering, 32 (2). pp. 181-200.

Ranitha, M. and Nurlidia, M. and Muhammad Rashid, S. and Yoshimitsu, U. (2016) Bioremoval of lead in industrial wastewater by microalgae. Journal of Engineering Science and Technology, 11 (Specia). pp. 43-49.

Rao, T.V.V.L.N. and Mokhtar, A.A. and Muhammad, M. and Hussain, P. (2016) Optimally tuned active damped dynamic vibration absorber. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13380-13383.

Reza Shamshirgaran, S. and Nouzari, M.M. and Khalaji Assadi, M. and Najafzadeh, K. and Reza Bayati, G. (2016) The indicators and criteria of efficiency, water consumption and emission of thermal power plants. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13338-13343.

Rahman, N.A.A. and Ismil, M.C. and Man, Z. (2016) Modification of epoxy with Polyaniline and its effects on cathodic disbondment factors. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12973-12978.

Razali, R. and Jaafar, J. (2016) Classification algorithm for customer complaint using fuzzy approach. Jurnal Teknologi, 78 (12-2). pp. 65-76.

Ridha, S. and Akmalludin, M. and Salehudin, S.S. (2016) Microstructure investigations on nano-geopolymer cement cured under HPHT conditions. ARPN Journal of Engineering and Applied Sciences, 11 (1). pp. 144-149.

Raza, T. and Muhammad, M.B. and Majid, M.A.A. (2016) A comprehensive framework and key performance indicators for maintenance performance measurement. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12146-12152.

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Hashim, F.M. (2016) Load capacity coefficient evaluation of three-layered journal bearing with slip. Jurnal Teknologi, 78 (6-10). pp. 39-43.

Rahman, N.A.A. and Ismail, M.C. and Man, Z. (2016) The effect of hydrogen diffusivities on PANI-modified epoxy coating under potentiostatic charging. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4214-4220.

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Nagarajan, T. and Hashim, F.M. (2016) Stability analysis of double porous and surface porous layer journal bearing. Tribology - Materials, Surfaces and Interfaces, 10 (1). pp. 19-25.

Reza Shamshirgaran, S. and Ameri, M. and Khalaji, M. and Ahmadi, M.H. (2016) Design and optimization of a compressed air energy storage (CAES) power plant by implementing genetic algorithm. Mechanics and Industry, 17 (1).

Rosli, M.A. and Yahaya, N.Z. and Baharudin, Z. (2016) Multi-input DC-AC inverter for hybrid renewable energy power system. International Journal of Electrical and Computer Engineering, 6 (1). pp. 40-52.

Rafique, M.Z. and Rahman, M.N.A. and Saibani, N. and Arsad, N. and Mughal, I.A. and Hanif, S. and Zafar, M. (2016) Quality check for customer benefit in bus transport system through statistical control charts and gauge R & R. International Journal of Applied Engineering Research, 11 (1). pp. 101-104.

Rahman, I. and Vasant, P.M. and Singh, B.S.M. and Abdullah-Al-Wadud, M. (2016) On the performance of accelerated particle swarm optimization for charging plug-in hybrid electric vehicles. Alexandria Engineering Journal, 55 (1). pp. 419-426.

Riahi, A. and Wan Yusof, K. and Mahinder Singh, B.S. and Isa, M.H. and Olisa, E. and Zahari, N.A.M. (2016) Sustainable potable water production using a solar still with photovoltaic modules-AC heater. Desalination and Water Treatment, 57 (32). pp. 14929-14944.

Rasin, N. and Kueh, A.B.H. and Mahat, M.N.H. and Yassin, A.Y.M. (2016) Stability of triaxially woven fabric composites employing geometrically nonlinear plate model with volume segmentation ABD constitution. Journal of Composite Materials, 50 (19). pp. 2719-2735.

Rao, T.V.V.L.N. and Rani, A.M.A. and Nagarajan, T. and Hashim, F.M. (2016) Analysis of Micropolar and Power Law Fluidâ��Lubricated Slider and Journal Bearing with Partial Slipâ��Partial Slip Texture Configuration. Tribology Transactions, 59 (5). pp. 896-910.

Rubab, S. and Hassan, M.F. and Mahmood, A.K. and Shah, S.N.M. (2016) Reliability driven constrained job scheduling on volunteer grid resources. Advanced Science Letters, 22 (10). pp. 2690-2694.

Rubab, S. and Hassan, M.F. and Mahmood, A.K. and Shah, S.N.M. (2016) Application analysis: Theory of constraints for job scheduling on volunteer grid resources. Advanced Science Letters, 22 (10). pp. 2715-2718.

Razali, R. and Jaafar, J. (2016) Classification algorithm for customer complaint using fuzzy approach. Jurnal Teknologi, 78 (12-2). pp. 65-76.

Rao, T.V.V.L.N. and Rani, A.M.A. and Awang, M. and Hashim, F.M. (2016) Load capacity coefficient evaluation of three-layered journal bearing with slip. Jurnal Teknologi, 78 (6-10). pp. 39-43.

Ramli, R. and Bakar, A.A. and Aziz, N. (2016) Review of literatures on trust factors affecting customer's purchase intention on SOHO seller: S-commerce context. Information (Japan), 19 (7B). pp. 2791-2796.

Raja Shahrom, M.S. and Wilfred, C.D. and Taha, A.K.Z. (2016) CO2 capture by task specific ionic liquids (TSILs) and polymerized ionic liquids (PILs and AAPILs). Journal of Molecular Liquids, 219. pp. 306-312.

Ramli, N.M. and Hussain, M.A. and Jan, B.M. (2016) Multivariable control of a debutanizer column using equation based artificial neural network model inverse control strategies. Neurocomputing, 194. pp. 135-150.

Rashid, T. and Kait, C.F. and Regupathi, I. and Murugesan, T. (2016) Dissolution of kraft lignin using Protic Ionic Liquids and characterization. Industrial Crops and Products, 84. pp. 284-293.

Rahman, I. and Vasant, P.M. and Singh, B.S.M. and Abdullah-Al-Wadud, M. and Adnan, N. (2016) Review of recent trends in optimization techniques for plug-in hybrid, and electric vehicle charging infrastructures. Renewable and Sustainable Energy Reviews, 58. pp. 1039-1047.

Riaz, N. and Chong, F.K. and Man, Z.B. and Sarwar, R. and Farooq, U. and Khan, A. and Khan, M.S. (2016) Preparation, characterization and application of Cu-Ni/TiO2 in Orange II photodegradation under visible light: Effect of different reaction parameters and optimization. RSC Advances, 6 (60). pp. 55650-55665.

Rais, H.M. and Mehmood, T. (2016) Feature selection in intrusion detection, state of the art: A review. Journal of Theoretical and Applied Information Technology, 94 (1). pp. 30-43.

Renganathan, S. (2016) Literacy and development for the Orang Asli in Malaysia: What matters? Prospects, 46 (3-4). pp. 479-490.

Rehman, S. and Ali, S.S. and Khan, S.A. (2016) Wind Farm Layout Design Using Cuckoo Search Algorithms. Applied Artificial Intelligence, 30 (10). pp. 899-922.

Rubab, S. and Hassan, M.F. and Mahmood, A.K. and Shah, S.N.M. (2016) Reliability driven constrained job scheduling on volunteer grid resources. Advanced Science Letters, 22 (10). pp. 2690-2694.

S

SY Moussavi Alashloo, DP Ghosh, Y Bashir, WY Wan Ismail, . (2016) Influence of Error in Estimating Anisotropy Parameters on VTI Depth Imaging. Influence of Error in Estimating Anisotropy Parameters on VTI Depth Imaging.

SYM Alashloo, D Ghosh, Y Bashir, . (2016) Application of VTI Fast Marching Eikonal Solver to Improve Seismic Imaging. Application of VTI Fast Marching Eikonal Solver to Improve Seismic Imaging.

Suleman, Humbul and Maulud, Abdulhalim Shah and Man, Zakaria (2016) A fugacity corrected thermodynamic framework for aqueous alkanolamine solutions. Journal of Solution Chemistry, 45. pp. 546-559.

Salam, M Abdus and Abdullah, Bawadi and Ramli, Anita and Mujtaba, Iqbal M (2016) Structural feature based computational approach of toxicity prediction of ionic liquids: cationic and anionic effects on ionic liquids toxicity. Journal of Molecular Liquids, 224. pp. 393-400.

Sikander, Umair and Sufian, Suriati and Salam, Md Abdus (2016) Synthesis and structural analysis of double layered Ni-Mg-Al hydrotalcite like catalyst. Procedia engineering, 148. pp. 261-267.

Shariff, Azmi Mohd and Wahab, Nordiana Abdul and Rusli, Risza (2016) Assessing the hazards from a BLEVE and minimizing its impacts using the inherent safety concept. Journal of Loss Prevention in the Process Industries, 41. pp. 303-314.

Suleman, Malik Shoaib and Lau, KK and Yeong, YF (2016) Characterization and performance evaluation of PDMS/PSF membrane for CO2/CH4 separation under the effect of swelling. Procedia engineering, 148. pp. 176-183.

Suleman, Malik Shoaib and Lau, Kok Keong and Yeong, Yin Fong (2016) Plasticization and swelling in polymeric membranes in CO2 removal from natural gas. Chemical Engineering & Technology, 39 (9). pp. 1604-1616.

Selvarajah, Kavineshshen and Phuc, Nguyen Huu Huy and Abdullah, Bawadi and Alenazey, Feraih and Vo, Dai-Viet N (2016) Syngas production from methane dry reforming over Ni/Al 2 O 3 catalyst. Research on Chemical Intermediates, 42. pp. 269-288.

Shamshirgaran, S. Reza and Ameri, M and Khalajiassadi, Morteza and Ahmadi, M. Hossein (2016) Design and optimization of a compressed air energy storage (CAES) power plant by implementing genetic algorithm. Mechanics & Industry, 17 (109). ISSN 2257-7777

Sethi, Muhammad Athar Javed and Hussin, Fawnizu Azmadi and Hamid, Nor Hisham (2016) Bio-inspired NoC fault tolerant techniques using guaranteed throughput and best effort services. Integration, the VLSI Journal, 54 (3). pp. 65-96. ISSN 0167-9260

Sethi, Athar Javed Sethi and Hussin, Fawnizu Azmadi and Hamid, Nor Hisham (2016) Implementation and Analysis of Biological Synaptogenesis Technique on Nodes and Interconnects for NoC Fault Tolerance. Research Journal of Applied Sciences, Engineering and Technology. ISSN 2040-7467

Sethi, Muhammad Athar Javed and Hussin, Fawnizu Azmadi and Hamid, Nor Hisham (2016) NoC Architecture: A Closer Look. Asian Journal of Information Technology. pp. 2531-2541. ISSN 1682-3915

S.N Fathiyah Jamaludin, Abdul Halim Abdul Latiff, Askury A. Kadi, . (2016) Interpretation of Gas Seepage on Seismic Data: Example from Malaysian Offshore. Interpretation of Gas Seepage on Seismic Data: Example from Malaysian Offshore.

Siti Nur Fathiyah Jamaludin, Manuel Pubellier, . (2016) INTERPRETATIONS ON SEISMIC VOLUME OVER TWO MIOCENE CARBONATE PLATFORMS IN CENTRAL LUCONIA, SARAWAK. INTERPRETATIONS ON SEISMIC VOLUME OVER TWO MIOCENE CARBONATE PLATFORMS IN CENTRAL LUCONIA, SARAWAK.

Shoaib, M. and Hamid, N.H. and Malik, A.F. and Zain Ali, N.B. and Tariq Jan, M. (2016) A Review on Key Issues and Challenges in Devices Level MEMS Testing. Journal of Sensors, 2016.

Suleman, M.S. and Lau, K.K. and Yeong, Y.F. (2016) Plasticization and Swelling in Polymeric Membranes in CO2 Removal from Natural Gas. Chemical Engineering and Technology, 39 (9). pp. 1604-1616.

Sarwar, M. and Abd Majid, M.A.B. and Ismail, M.C. (2016) Proposed guidelines for welding procedures to ensure quality welding of creep strength enhanced ferritic (CSEF) materials. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7765-7773.

Saieed, A. and Sam, B. and Pao, W. and Hashim, F.M. and Norpiah, R.B.M. (2016) A review of t-junction geometrical effect on two-phase separation. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14233-14238.

Sivanathan, P. and Ismail, M.C. and Eng, K.K. (2016) Chloride stress corrosion cracking (cscc) of austenitic stainless steel under thermal insulation: Case study analysis. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14239-14243.

Sulaiman, S.A. and Inayat, M. and Basri, H. and Guangul, F.M. and Atnaw, S.M. (2016) Effect of blending ratio on temperature profile and syngas composition of woody biomass co-gasification. Journal of Mechanical Engineering and Sciences, 10 (2). pp. 2176-2186.

Shuaib, K. and Hussin, H. and Abd Majid, M.A. (2016) Fuzzy multi-criteria decision making model for risk assessment. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13072-13077.

Srinivasa Rao, P. and Bawazir, A.F.O. and Awang, M. and Rani, A.M.A. and Jebaraj, S. (2016) Effect of tool geometrical parameters on friction stir welding joint properties of aluminum alloy AA6061. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13053-13058.

Said, M.A. and Bong, D. and Mohd, M.S. and Dol, S.S. (2016) Prototype development of thermoelectric generator system for exhaust heat recovery of an automobile. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12217-12231.

Sudiskumar, D. and Ismail, F.B. and Nasif, M.S. (2016) Design and implementation of cooking oil and water filtration system for domestic application. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12222-12227.

Sabir, O. and Tuan Ya, T.M.Y.S. (2016) Cell by cell artificial neural network model for predicting laminar, incompressible, viscous flow. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12084-12089.

Sam, B. and Pao, W. and Nasif, M.S. and Norpiah, R.B.M. (2016) Simulation of two phase oil-gas flow in T-junction. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12011-12016.

Shobowale, K.O. and Hashim, F.M. and Hussin, H. (2016) Ontology based decision support knowledge acquisition module. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11988-11993.

Shiang, W.C. and Izzatdin, A.A. and Haron, N.S. and Jaafar, J. and Ismail, N.N. and Mehat, M. (2016) The high performance linpack (HPL) benchmark evaluation on UTP high performance cluster computing. Jurnal Teknologi, 78 (9-3). pp. 21-30.

Salehudin, S.S. and Ridha, S. (2016) Coconut residue as biopolymer drag reducer agent in water injection system. International Journal of Applied Engineering Research, 11 (13). pp. 8037-8040.

Singh, V. and Elamvazuthi, I. and Jeoti, V. and George, J. and Kumar, D. (2016) Computer aided diagnosis (CAD) tool for the analysis of calcaneofibular ligament using ultrasonographic images. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8972-8977.

Sheikh, M.A. and Nor, N.M. and Ibrahim, T. (2016) A new method for detection of unbalance voltage supply in three phase induction motor. Jurnal Teknologi, 78 (5-8). pp. 7-12.

Salihi, I.U. and Kutty, S.R.M. and Isa, M.H. and Malakahmad, A. and Umar, U.A. (2016) Sorption of zinc using microwave incinerated sugarcane bagasse ash (MISCBA) and raw bagasse. Jurnal Teknologi, 78 (5-3). pp. 47-51.

Siang, T.L. and Aziz, Z.A. and Ching, D.L.C. (2016) SV-wave with external force in saturated medium. Jurnal Teknologi, 78 (3-2). pp. 101-106.

Soleimani, H. and Yahya, N. and Baig, M.K. and Khodapanah, L. and Sabet, M. and Bhat, A.H. and Ã�chsner, A. and Awang, M. (2016) Catalytic effect of zinc oxide nanoparticles on oil-water interfacial tension. Digest Journal of Nanomaterials and Biostructures, 11 (1). pp. 263-269.

Setvati, M.R. and Mustaffa, Z. and Isnadi, B. and Shafiq, N. and Syed, Z.I. and Kim, D.K. (2016) Meso-scale numerical study of composite patch repaired hole drilled steel plate. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1724-1728.

Shaikh, P.H. and Nor, N.B.M. and Nallagownden, P. and Elamvazuthi, I. and Ibrahim, T. (2016) Intelligent multi-objective control and management for smart energy efficient buildings. International Journal of Electrical Power and Energy Systems, 74. pp. 403-409.

Siddiqui, M.I. and Munir, S. and Heikal, M.R. and de Sercey, G. and Aziz, A.R.A. and Dass, S.C. (2016) Simultaneous velocity measurements and the coupling effect of the liquid and gas phases in slug flow using PIVâ��LIF technique. Journal of Visualization, 19 (1). pp. 103-114.

Singh, V. and Elamvazuthi, I. and Jeoti, V. and George, J. and Swain, A. and Kumar, D. (2016) Impacting clinical evaluation of anterior talofibular ligament injuries through analysis of ultrasound images. BioMedical Engineering Online, 15 (1).

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Saheed, M.S.M. and Irshad, M.I. (2016) Effect of CVD Process Temperature on Activation Energy and Structural Growth of MWCNTs. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 47 (3). pp. 1413-1424.

Saand, A.S. and Jeoti, V. and Saad, M.N.M. (2016) Efficient Beamforming by SLNR Maximization for Dual-Hop Relay Assisted MIMO Network. Wireless Personal Communications, 87 (3). pp. 645-661.

Shariff, A.M. and Wahab, N.A. and Rusli, R. (2016) Assessing the hazards from a BLEVE and minimizing its impacts using the inherent safety concept. Journal of Loss Prevention in the Process Industries, 41. pp. 303-314.

Saiful Bahari, N.i. and Ahmad, A. and Aboobaider, B.M. and Razali, M.F. and Sakidin, H. and Mohamad Isa, M.S. (2016) Restoration of hazy data based on spectral and statistical methods. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 6807-6813.

Sulaiman, S.A. and Miin, C.S. and Naz, M.Y. and Raghavan, V.R. (2016) Particle Image Velocimetry of a Swirling Fluidized Bed at Different Blade Angles. Chemical Engineering and Technology, 39 (6). pp. 1151-1160.

Sethi, M.A.J. and Hussin, F.A. and Hamid, N.H. (2016) Bio-inspired NoC fault tolerant techniques using guaranteed throughput and best effort services. Integration, the VLSI Journal, 54. pp. 65-96.

Suki, N.S.A. and Yee, O.H. and Kamaruddin, S. and Bakar, E.A. (2016) Establishing an optimal quality planning decision through discrete event simulation: Analysis case study. Jurnal Teknologi, 78 (7). pp. 149-160.

Sivapalan, S. and Clifford, M.J. and Speight, S. (2016) Engineering education for sustainable development: using online learning to support the new paradigms. Australasian Journal of Engineering Education, 21 (2). pp. 61-73.

Shafa, M. and Wang, Z. and Naz, M.Y. and Akbar, S. and Farooq, M.U. and Ghaffar, A. (2016) Morphology and photoresponse of crystalline antimony film grown on mica by physical vapor deposition. Materials Science- Poland, 34 (3). pp. 591-596.

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Naz, M.Y. (2016) Effect of Ethylene Flow Rate and CVD Process Time on Diameter Distribution of MWCNTs. Materials and Manufacturing Processes, 31 (12). pp. 1537-1542.

Shetty, N. and Deshannavar, U.B. and Marappagounder, R. and Pendyala, R. (2016) Improved threshold fouling models for crude oils. Energy, 111. pp. 453-467.

Suman, S. and Hussi, F.A. and Nicolas, W. and Malik, A.S. (2016) Ulcer detection and classification of wireless capsule endoscopy images using RGB masking. Advanced Science Letters, 22 (10). pp. 2764-2768.

Shafiq, N. and Ayub, T. and Khan, S.U. (2016) Investigating the performance of PVA and basalt fibre reinforced beams subjected to flexural action. Composite Structures, 153. pp. 30-41.

Saeed, M.O. and Azizli, K.A.M. and Isa, M.H. and Ezechi, E.H. (2016) Treatment of POME using Fenton oxidation process: removal efficiency, optimization, and acidity condition. Desalination and Water Treatment, 57 (50). pp. 23750-23759.

Saieed, A. and Sam, B. and Pao, W. and Hashim, F.M. (2016) Numerical investigation of side arm gas volume fraction in two phase T-junction. Journal of Mechanical Engineering and Sciences, 10 (3). pp. 2311-2323.

Shahbaz, M. and Yusup, S. and Inayat, A. and Patrick, D.O. and Pratama, A. (2016) Application of response surface methodology to investigate the effect of different variables on conversion of palm kernel shell in steam gasification using coal bottom ash. Applied Energy, 184. pp. 1306-1315.

Sohaili, J. and Shi, H.S. and Lavania-Baloo and Zardari, N.H. and Ahmad, N. and Muniyandi, S.K. (2016) Removal of scale deposition on pipe walls by using magnetic field treatment and the effects of magnetic strength. Journal of Cleaner Production, 139. pp. 1393-1399.

Siang, T.L. and Aziz, Z.A. and Ching, D.L.C. (2016) SV-wave with external force in saturated medium. Jurnal Teknologi, 78 (3-2). pp. 101-106.

Shuaib, K. and Hussin, H. and Abd Majid, M.A. (2016) Fuzzy multi-criteria decision making model for risk assessment. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13072-13077.

Shobowale, K.O. and Hashim, F.M. and Hussin, H. (2016) Ontology based decision support knowledge acquisition module. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11988-11993.

Sheikh, M.A. and Nor, N.M. and Ibrahim, T. (2016) A new method for detection of unbalance voltage supply in three phase induction motor. Jurnal Teknologi, 78 (5-8). pp. 7-12.

Shafiq, N. and Ayub, T. and Khan, S.U. (2016) Investigating the performance of PVA and basalt fibre reinforced beams subjected to flexural action. Composite Structures, 153. pp. 30-41.

Sethi, M.A.J. and Hussin, F.A. and Hamid, N.H. (2016) Bio-inspired NoC fault tolerant techniques using guaranteed throughput and best effort services. Integration, the VLSI Journal, 54. pp. 65-96.

Sam, B. and Pao, W. and Nasif, M.S. and Norpiah, R.B.M. (2016) Simulation of two phase oil-gas flow in T-junction. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12011-12016.

Salehudin, S.S. and Ridha, S. (2016) Coconut residue as biopolymer drag reducer agent in water injection system. International Journal of Applied Engineering Research, 11 (13). pp. 8037-8040.

Shah, S.N. and Mutalib, M.I.A. and Ismail, M.F. and Suleman, H. and Lethesh, K.C. and Pilus, R.B.M. (2016) Thermodynamic modelling of liquid-liquid extraction of naphthenic acid from dodecane using imidazolium based phenolate ionic liquids. Journal of Molecular Liquids, 219. pp. 513-525.

Saman, N. and Johari, K. and Song, S.-T. and Kong, H. and Cheu, S.-C. and Mat, H. (2016) High removal efficiency of Hg(II) and MeHg(II) from aqueous solution by coconut pith - Equilibrium, kinetic and mechanism analyses. Journal of Environmental Chemical Engineering, 4 (2). pp. 2487-2499.

Song, S.-T. and Hau, Y.-F. and Saman, N. and Johari, K. and Cheu, S.-C. and Kong, H. and Mat, H. (2016) Process analysis of mercury adsorption onto chemically modified rice straw in a fixed-bed adsorber. Journal of Environmental Chemical Engineering, 4 (2). pp. 1685-1697.

Sekhar, Y.R. and Sharma, K.V. and Kamal, S. (2016) Nanofluid heat transfer under mixed convection flow in a tube for solar thermal energy applications. Environmental Science and Pollution Research, 23 (10). pp. 9411-9417.

Salleh, R. and Md Yusof, M.A. and Memon, M.A. (2016) Attributes of graduate architects: An industry perspective. Social Sciences (Pakistan), 11 (5). pp. 551-556.

Suleman, H. and Maulud, A.S. and Man, Z. (2016) A hybrid equation of state and Kent-Eisenberg model for accurate prediction of carbon dioxide separation by aqueous alkanolamines. Separation Science and Technology (Philadelphia), 51 (17). pp. 2744-2755.

Selvarajah, K. and Phuc, N.H.H. and Abdullah, B. and Alenazey, F. and Vo, D.-V.N. (2016) Syngas production from methane dry reforming over Ni/Al2O3 catalyst. Research on Chemical Intermediates, 42 (1). pp. 269-288.

Sivapalan, S. (2016) Engineering education for sustainable development in malaysia: Student stakeholders perspectives on the integration of holistic sustainability competences within undergraduate engineering programmes. World Sustainability Series. pp. 263-285.

Saand, A.S. and Jeoti, V. and Saad, M.N.M. (2016) Efficient Beamforming by SLNR Maximization for Dual-Hop Relay Assisted MIMO Network. Wireless Personal Communications, 87 (3). pp. 645-661.

Singh, V. and Elamvazuthi, I. and Jeoti, V. and George, J. and Yahya, N. and Kumar, D. (2016) Ultrasound based three dimensional computer aided diagnosis (CAD) tool for the diagnosis of anterior talofibular ligament. Studies in Computational Intelligence, 651. pp. 213-235.

Shahbazi, A. and Ghosh, D. and Soleimani, M. and Gerami, A. (2016) Seismic imaging of complex structures with the CO-CDS stack method. Studia Geophysica et Geodaetica, 60 (4). pp. 662-678.

Sivapragasam, M. and Moniruzzaman, M. and Goto, M. (2016) Recent advances in exploiting ionic liquids for biomolecules: Solubility, stability and applications. Biotechnology Journal, 11 (8). pp. 1000-1013.

Salam, M.A. and Abdullah, B. and Ramli, A. and Mujtaba, I.M. (2016) Structural feature based computational approach of toxicity prediction of ionic liquids: Cationic and anionic effects on ionic liquids toxicity. Journal of Molecular Liquids, 224. pp. 393-400.

Shah, S.H. and Uemura, Y. and Yusup, S. and Kusakabe, K. and Mahmood, Q. and Ali, A. (2016) Nano-Structured Porous Yttria-Stabilized Zirconia Membrane for High-Temperature CO 2 Capture from H 2/ CO 2 Mixture. Arabian Journal for Science and Engineering, 41 (12). pp. 4763-4774.

Shehzad, A. and Bashir, M.J.K. and Sethupathi, S. and Lim, J.-W. and Younas, M. (2016) Bioelectrochemical system for landfill leachate treatment â�� challenges, opportunities, and recommendations. Geosystem Engineering, 19 (6). pp. 337-345.

Shehzad, A. and Bashir, M.J.K. and Sethupathi, S. and Lim, J.-W. (2016) Simultaneous removal of organic and inorganic pollutants from landfill leachate using sea mango derived activated carbon via microwave induced activation. International Journal of Chemical Reactor Engineering, 14 (5). pp. 991-1001.

Shahbazi, A. and Ghosh, D. and Soleimani, M. and Gerami, A. (2016) Seismic imaging of complex structures with the CO-CDS stack method. Studia Geophysica et Geodaetica, 60 (4). pp. 662-678.

Shafiq, N. and Ayub, T. and Khan, S.U. (2016) Investigating the performance of PVA and basalt fibre reinforced beams subjected to flexural action. Composite Structures, 153. pp. 30-41.

Shah, S.N. and Ismail, M. and Mutalib, M.I.A. and Pilus, R.B.M. and Chellappan, L.K. (2016) Extraction and recovery of toxic acidic components from highly acidic oil using ionic liquids. Fuel, 181. pp. 579-586.

Shetty, N. and Deshannavar, U.B. and Marappagounder, R. and Pendyala, R. (2016) Improved threshold fouling models for crude oils. Energy, 111. pp. 453-467.

Sani, Nur Ain Mohd and Man, Zakaria and Shamsuddin, Rashid M and Azizli, Khairun Azizi and Shaari, Ku Zilati Ku (2016) Determination of excess sodium hydroxide in geopolymer by volumetric analysis. Procedia engineering, 148. pp. 298-301.

Sundramoorthy, Jega Divan and Hammonds, Paul and Lal, Bhajan and Phillips, Greg (2016) Gas hydrate gas hydrate equilibrium measurement and observation of gas hydrate dissociation with/without a KHI. Procedia engineering, 148. pp. 870-877.

Sivapragasam, Magaret and Moniruzzaman, Muhammad and Goto, Masahiro (2016) Recent advances in exploiting ionic liquids for biomolecules: Solubility, stability and applications. Biotechnology journal, 11 (8). pp. 1000-1013.

Shah, Mansoor Ul Hassan and Sivapragasam, Magaret and Moniruzzaman, Muhammad and Yusup, Suzana Bt (2016) A comparison of recovery methods of rhamnolipids produced by Pseudomonas aeruginosa. Procedia engineering, 148. pp. 494-500.

T

Tiong, Laura and Komiyama, Masaharu and Uemura, Yoshimitsu and Nguyen, Tien Thanh (2016) Catalytic supercritical water gasification of microalgae: Comparison of Chlorella vulgaris and Scenedesmus quadricauda. The Journal of supercritical fluids, 107. pp. 408-413.

Taqvi, SA and Tufa, LD and Mahadzir, S (2016) Rigorous steady-state simulation of acetone production using Aspen HYSYS®. Aust. J. Basic Appl. Sci, 9 (36). pp. 535-542.

Tay, Wee Horng and Lau, Kok Keong and Shariff, Azmi Mohd (2016) High frequency ultrasonic assisted mass-transfer for water batch reactor. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1660-1665.

Tay, WH and Lau, KK and Shariff, AM (2016) High frequency ultrasonic-assisted CO2 absorption in a high pressure water batch system. Ultrasonics sonochemistry, 33. pp. 190-196.

Tan, LS and Shariff, AM and Tay, WH and Lau, KK and Halim, HNA (2016) Integrated mathematical modeling for prediction of rich CO2 absorption in structured packed column at elevated pressure conditions. Journal of Natural Gas Science and Engineering, 28. pp. 737-745.

Tan, LS and Shariff, AM and Lau, KK and Shaikh, MS and Murshid, G (2016) High pressure rheology and viscosity of monoethanolamine with n-methyl-2-pyrrolidone and water hybrid solvent. Procedia Engineering, 148. pp. 5-10.

Tay, Wee Horng and Lau, Kok Keong and Shariff, Azmi Mohd (2016) Numerical simulation for dehydration of natural gas using Joule Thompson cooling effect. Procedia engineering, 148. pp. 1096-1103.

Tahan, M. and Sarwar, U. and Muhammad, M. and Abdul Karim, Z.A. (2016) Modeling and sensitivity analysis of a multi-nets anns model for real-time performance-based condition monitoring of an industrial gas turbine engine. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14269-14274.

Tamiru, A.L. and Fakhruldin, M.H. and Mohd Amin, A.M. and Ainul, A.M. (2016) Gas turbines health prognostics: A short review. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13214-13219.

Tamiru, A.L. and Fakhruldin, M.H. and Mohd. Amin, A.M. and Ainul, A.M. (2016) Orthonormal Basis Filters for gas turbine fault diagnostics system design: A review. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13399-13404.

Talib, N. and Abd Majid, M.A. (2016) Thermodynamic analysis on oil palm biomass Cogeneration Plant. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12959-12966.

Theo, W.L. and Lim, J.S. and Wan Alwi, S.R. and Mohammad Rozali, N.E. and Ho, W.S. and Abdul-Manan, Z. (2016) An MILP model for cost-optimal planning of an on-grid hybrid power system for an eco-industrial park. Energy, 116. pp. 1423-1441.

Tay, W.H. and Lau, K.K. and Shariff, A.M. (2016) High frequency ultrasonic assisted mass-transfer for water batch reactor. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1660-1665.

Tan, K.-C. and Seng, C.-E. and Lim, P.-E. and Oo, C.-W. and Lim, J.-W. and Kew, S.-L. (2016) Alteration of moving bed sequencing batch reactor operational strategies for the enhancement of nitrogen removal from stabilized landfill leachate. Desalination and Water Treatment, 57 (34). pp. 15979-15988.

Tay, W.H. and Lau, K.K. and Shariff, A.M. (2016) High frequency ultrasonic assisted mass-transfer for water batch reactor. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1660-1665.

Talib, N. and Abd Majid, M.A. (2016) Thermodynamic analysis on oil palm biomass Cogeneration Plant. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12959-12966.

Tay, W.H. and Lau, K.K. and Shariff, A.M. (2016) High frequency ultrasonic-assisted CO2 absorption in a high pressure water batch system. Ultrasonics Sonochemistry, 33. pp. 190-196.

Trinh, Thanh H and KuShaari, KuZilati (2016) Dynamic of water absorption in controlled release fertilizer and its relationship with the release of nutrient. Procedia engineering, 148. pp. 319-326.

Tzi, Elaine Chong Nyuk and Ching, Oh Pei (2016) Surface modification of AMH-3 for development of mixed matrix membranes. Procedia engineering, 148. pp. 86-92.

U

Ullah, H. and Azizli, K.A.M. and Man, Z.B. and Che Ismail, M.B. and Khan, M.I. (2016) The potential of microencapsulated self-healing materials for microcracks recovery in self-healing composite systems: A review. Polymer Reviews, 56 (3). pp. 429-485.

Umar, U.A. and Shafiq, N. and Malakahmad, A. and Nuruddin, M.F. and Farhan, S.A. and Salihi, I.U. (2016) Application of structural building information modeling (S-BIM) for sustainable buildings design and waste reduction: A review. International Journal of Applied Engineering Research, 11 (2). pp. 1523-1532.

Ullah, B. and Ovinis, M. and Baharom, M.B. and Setiawan, J.D. and Ali, S.S.A. and Javaid, M.Y. (2016) Motion control strategy of an underwater glider in the presence of external disturbances. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13031-13037.

Uddin, F. and Taqvi, S.A. and Memon, I. (2016) Process simulation and sensitivity analysis of indirect coal gasification using aspen plusÂ® model. ARPN Journal of Engineering and Applied Sciences, 11 (17). pp. 10546-10552.

Umar, U.A. and Shafiq, N. and Malakahmad, A. and Nuruddin, M.F. and Khamidi, M.F. and Salihi, I.U. (2016) Impact of construction waste minimization at construction site: Case study. Jurnal Teknologi, 78 (5-3). pp. 33-40.

Ullah, Z. and Azmi Bustam, M. and Man, Z. and Khan, A.S. (2016) Phosphonium-based ionic liquids and their application in separation of dye from aqueous solution. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1653-1659.

Ullah, S. and Shariff, A.M. and Bustam, M.A. and Elkhalifah, A.E.I. and Gonfa, G. and Kareem, F.A.A. (2016) The Role of Multiwall Carbon Nanotubes in Cu-BTC Metal-Organic Frameworks for CO2 Adsorption. Journal of the Chinese Chemical Society, 63 (12). pp. 1022-1032.

Ullah, Z. and Bustam, M.A. and Man, Z. and Shah, S.N. and Khan, A.S. and Muhammad, N. (2016) Synthesis, characterization and physicochemical properties of dual-functional acidic ionic liquids. Journal of Molecular Liquids, 223. pp. 81-88.

ur Rehman, Adeel and Lal, Bhajan and Zaini, Dzulkarnain B (2016) Application of Gas Hydrate Based Technique in Wastewater Treatment-A Review.

V

Vandrangi, S.K. and Sharma, K.V. and Kamal, S. and Akilu, S. (2016) Heat transfer enhancement under turbulent flow for EG-water mixture of 40:60 ratio. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12942-12946.

Vasant, P.M. and Rahman, I. and Singh, B.S.M. and Abdullah-Al-Wadud, M. (2016) Optimal power allocation scheme for plug-in hybrid electric vehicles using swarm intelligence techniques. Cogent Engineering, 3 (1).

Van Ranst, E. and Padmanabhan, E. and Vandenberghe, R.E. and De Grave, E. and Mees, F. (2016) Yellowing of a red south african kandiudult, studied by means of mÃ¶ssbauer spectroscopy. Soil Science, 181 (2). pp. 75-81.

W

Wahab, Nur Wasimah Abd and Sufian, Suriati and Van, Thien Duc Nguyen and Shaharun, Maizatul Shima (2016) Comparative Studies of Pristine and Functionalized CNFs Surface Properties and their Performance in Iron Distribution. Procedia engineering, 148 (1). pp. 136-145.

Wahab, Nordiana Abdul and Rusli, Risza and Shariff, Azmi Mohd and Rashid, Ezmal Abdul and Ali, M Fazaly M (2016) Selection of inherently safer preventive measures to reduce human error. Journal of Loss Prevention in the Process Industries, 41. pp. 323-332.

Woldeyohannes, Abraham D. and Woldemichael, Dereje Engida and Baheta, Aklilu Tesfamichael (2016) Sustainable Renewable Energy Resources Utilization in Rural Areas. Renewable & Sustainable Energy Reviews.

Woldemichael, D.E. and Woldeyohannes, A.D. (2016) Optimization of pressure vessel design using pyopt. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14264-14268.

Wei, W.H. and Gilani, S.I.U.-H. and Al-Kayiem, H. (2016) Setting up a remote accessing of a PV plant and its analysis. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13420-13425.

Wahab, N.A. and Rusli, R. and Shariff, A.M. and Rashid, E.A. and Ali, M.F.M. (2016) Selection of inherently safer preventive measures to reduce human error. Journal of Loss Prevention in the Process Industries, 41. pp. 323-332.

Wan Kamarudin, W.N.I. and Buang, A. (2016) Small scale boilover and visualization of hot zone. Journal of Loss Prevention in the Process Industries, 44. pp. 232-240.

Woldemichael, D.E. and Woldeyohannes, A.D. (2016) Optimization of pressure vessel design using pyopt. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14264-14268.

Wei, W.H. and Gilani, S.I.U.-H. and Al-Kayiem, H. (2016) Setting up a remote accessing of a PV plant and its analysis. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13420-13425.

Wan Kamarudin, W.N.I. and Buang, A. (2016) Small scale boilover and visualization of hot zone. Journal of Loss Prevention in the Process Industries, 44. pp. 232-240.

Waheed, N. and Mushtaq, A. and Tabassum, S. and Gilani, M.A. and Ilyas, A. and Ashraf, F. and Jamal, Y. and Bilad, M.R. and Khan, A.U. and Khan, A.L. (2016) Mixed matrix membranes based on polysulfone and rice husk extracted silica for CO2 separation. Separation and Purification Technology, 170. pp. 122-129.

Wong, M.K. and Shariff, A.M. and Bustam, M.A. (2016) Raman spectroscopic study on the equilibrium of carbon dioxide in aqueous monoethanolamine. RSC Advances, 6 (13). pp. 10816-10823.

Woldeyohannes, A.D. and Woldemichael, D.E. and Baheta, A.T. (2016) Sustainable renewable energy resources utilization in rural areas. Renewable and Sustainable Energy Reviews, 66. pp. 1-9.

Y

Y Bashir, DP Ghosh, SY Moussavi Alashloo, CW Sum, . (2016) Enhancement in Seismic Imaging using Diffraction Studies and Hybrid Traveltime Technique for PSDM. Enhancement in Seismic Imaging using Diffraction Studies and Hybrid Traveltime Technique for PSDM.

Yaqub, Sana and Pei, Lee Siew and Mellon, Nurhayati and Shariff, Azmi M (2016) Performance evaluation of covalent organic polymer adsorbent prepared via microwave technique for CO2 and CH4 adsorption. Procedia engineering, 148. pp. 249-253.

Yi, Chiah Yoke and Mahadzir, Shuhaimi B (2016) Modeling of multiple reversible reaction system. Procedia engineering, 148. pp. 970-977.

Yahyazadeh, A. and Abd Majid, M.A. (2016) Supply chain model for gas pipeline. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7841-7847.

Yasir, M. and Ginta, T.L. and Ariwahjoedi, B. and Danish, M. and Alkali, A.U. (2016) Evaluation of chips formation of AISI 316L SS using precision end-milling. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12903-12907.

Yahyazadeh, A. and Abd Majid, M.A. (2016) Transportation programming model for gas network. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13059-13064.

Yin, K.Y. and Al-Kayiem, H.H. and Son, W.P.K. (2016) Numerical investigation on the effect of the inlets on the performance of oil/water separation in hydro cyclone. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13359-13364.

Yusoff, Y. and Bakar, A.A. and Aziz, N. and Ismail, R. and Ramli, R. (2016) Ascertaining trust of information transmitted during a disaster. Journal of Telecommunication, Electronic and Computer Engineering, 8 (6). pp. 119-124.

Yahya, S.M. and Abdullah, R.A. and Mohamad Ismail, M.A. and Mohamad, H. and Hezmi, M.A. and Jusoh, S.N. (2016) 3D numerical modelling of shallow tunnel in weathered granite incorporating multi-stage excavation and pre-support. Jurnal Teknologi, 78 (8-6). pp. 39-44.

Yanti, D.K. and Yusoff, M.Z. and Asirvadam, V.S. (2016) Single-trial visual evoked potential extraction using partial least-squares-based approach. IEEE Journal of Biomedical and Health Informatics, 20 (1). pp. 82-90.

Yasir, M. and Ginta, T.L. and Ariwahjoedi, B. and Alkali, A.U. and Danish, M. (2016) Effect of cutting speed and feed rate on surface roughness of AISI 316l SS using end-milling. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2496-2500.

Yazid, E. and Liew, M.S. and Parman, S. and Kurian, V.J. (2016) Identification of transfer functions from surge motion response of a semisubmersible platform using time-varying NARX model. Applied Ocean Research, 54. pp. 53-66.

Yiin, C.L. and Yusup, S. and Quitain, A.T. and Sasaki, M. and Uemura, Y. and Kida, T. (2016) Microwave-assisted hydrothermal extraction of natural malic acid for the synthesis of low transition temperature mixtures. Journal of Cleaner Production, 113. pp. 919-924.

Youssef, S.A.M. and Faisal, M. and Seo, J.K. and Kim, B.J. and Ha, Y.C. and Kim, D.K. and Paik, J.K. and Cheng, F. and Kim, M.S. (2016) Assessing the risk of ship hull collapse due to collision. Ships and Offshore Structures, 11 (4). pp. 335-350.

Yahyazadeh, A. and Abd Majid, M.A. (2016) Supply chain model for gas pipeline. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7841-7847.

Yadzir, Z.H.M. and Shukor, M.Y. and Ahmad, A. and Nazir, M.S. and Shah, S.M.U. and Abdullah, M.A. (2016) Phenol removal by newly isolated Acinetobacter baumannii strain Serdang 1 in a packed-bed column reactor. Desalination and Water Treatment, 57 (28). pp. 13307-13317.

Yiin, C.L. and Yusup, S. and Mohamed, M. and Udomsap, P. and Yoosuk, B. and Sukkasi, S. (2016) Stabilization of empty fruit bunch derived bio-oil using solvents. Journal of Sustainable Development of Energy, Water and Environment Systems, 4 (1). pp. 38-47.

Yassen, T.A. and Al-Kayiem, H.H. (2016) Experimental investigation and evaluation of hybrid solar/thermal dryer combined with supplementary recovery dryer. Solar Energy, 134. pp. 284-293.

Yavari, S. and Malakahmad, A. and Sapari, N.B. and Yavari, S. (2016) Sorption-desorption mechanisms of imazapic and imazapyr herbicides on biochars produced from agricultural wastes. Journal of Environmental Chemical Engineering, 4 (4). pp. 3981-3989.

Yazdani, A and Sivapragasam, M and Leveque, JM and Moniruzzaman, M (2016) Microbial biocompatibility and biodegradability of choline-amino acid based ionic liquids. J Microb Biochem Technol, 8 (10.417). pp. 1948-5948.

Z

Zabiri, H and Elarafi, M Gaberalla MK (2016) Analysis of Control Valves Stiction Quantification Tool. ASEAN Journal of Chemical Engineering, 16 (2). pp. 70-94.

Zakaria, M.S. and Hassan, S. and Faizairi, M. (2016) Moisture content of the sewage sludge dried using thermal dryer. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14230-14232.

Zahidah, K.A. and Kakooei, S. and Pang, M.A.S.B.M.R. and Ismail, M.C. and Eng, K.K. and Raja, P.B. and Mustapha, M. (2016) Statistical analysis of effective variable parameters on corrosion rate of X52 carbons steel. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 12929-12936.

Zafar, A. and Awang, M. and Khan, S.R. and Emamian, S. (2016) Role of pin profile on material flow during friction stir welding of nylon-6. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13309-13312.

Zahraee, S.M. and Chegeni, A. and Toghtamish, A. (2016) The optimal parameter design for a welding unit of manufacturing industry by taguchi method and computer simulation. Journal of Industrial Engineering and Management, 9 (2). pp. 487-504.

Zakaria, W.W.N.L. and Che Ismail, M. and Abd Karim, M.F. (2016) Inhibition effect of enhanced oil recovery (eor) surfactant on carbon steel corrosion. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12090-12093.

Zaman, N. and Tang Jung, L. and Yasin, M.M. (2016) Enhancing Energy Efficiency of Wireless Sensor Network through the Design of Energy Efficient Routing Protocol. Journal of Sensors, 2016.

Zahari, M.K. and Ahmad, B.H. and Wong, P.W. and Shairi, N.A. (2016) Comparative study of switchable filters and a new technique of bandstop to bandpass filter using lossy resonators. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3896-3903.

Zafar, A. and Awang, M. and Khan, S.R. and Emamian, S. (2016) Visual analysis of material flow during friction stir welding of nylon-6. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4186-4190.

Zainal Abidin, M. and Rusli, R. and Mohd Shariff, A. and Khan, F.I. (2016) Three-Stage ISD Matrix (TIM) Tool to Review the Impact of Inherently Safer Design Implementation. Process Safety and Environmental Protection, 99. pp. 30-42.

Zafar, A. and Awang, M. and Khan, S.R. and Emamian, S. (2016) Investigating friction stir welding on thick nylon 6 plates. Welding Journal, 95 (6). 210s-218s.

Zainal Abidin, M. and Rusli, R. and Buang, A. and Mohd Shariff, A. and Khan, F.I. (2016) Resolving inherent safety conflict using quantitative and qualitative technique. Journal of Loss Prevention in the Process Industries, 44. pp. 95-111.

Zaman, N. and Tang Jung, L. and Yasin, M.M. (2016) Enhancing Energy Efficiency of Wireless Sensor Network through the Design of Energy Efficient Routing Protocol. Journal of Sensors, 2016.

Zakaria, M.S. and Hassan, S. and Faizairi, M. (2016) Moisture content of the sewage sludge dried using thermal dryer. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14230-14232.

Zafar, A. and Awang, M. and Khan, S.R. and Emamian, S. (2016) Investigating friction stir welding on thick nylon 6 plates. Welding Journal, 95 (6). 210s-218s.

Zahraee, S.M. and Khalaji Assadi, M. and Saidur, R. (2016) Application of Artificial Intelligence Methods for Hybrid Energy System Optimization. Renewable and Sustainable Energy Reviews, 66. pp. 617-630.

Zafar, A. and Awang, M. and Khan, S.R. and Emamian, S. (2016) Investigating friction stir welding on thick nylon 6 plates. Welding Journal, 95 (6). 210s-218s.

Zandi, J. and Ghazvinei, P.T. and Hashim, R. and Yusof, K.B.W. and Ariffin, J. and Motamedi, S. (2016) Mapping of regional potential groundwater springs using Logistic Regression statistical method. Water Resources, 43 (1). pp. 48-57.

Zafar, Faisal and Mandal, Pradip Chandra and Moniruzzaman, Muhammad and others (2016) Total acid number reduction of naphthenic acid using subcritical methanol and 1-butyl-3-methylimidazolium octylsulfate. Procedia engineering, 148. pp. 1074-1080.

This list was generated on Tue Dec 3 06:55:04 2024 +08.