Browse by Type

Group by: Creators | Item Type | No Grouping

Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | Y | Z

Number of items: 1171.

A

Alaloul, W.S. and John, V.O. and Musarat, M.A. (2020) Mechanical and Thermal Properties of Interlocking Bricks Utilizing Wasted Polyethylene Terephthalate. International Journal of Concrete Structures and Materials, 14 (1).

Alyan, E. and Saad, N.M. and Kamel, N. and Rahman, M.A. (2020) Investigating Frontal Neurovascular Coupling in Response to Workplace Design-Related Stress. IEEE Access, 8. pp. 218911-218923.

Azeem, Babar and KuShaari, Kuzilati and Naqvi, Muhammad and Kok Keong, Lau and Almesfer, Mohammed Khaloofah and Al-Qodah, Zakaria and Naqvi, Salman Raza and Elboughdiri, Noureddine (2020) Production and characterization of controlled release urea using biopolymer and geopolymer as coating materials. Polymers, 12 (2). p. 400.

Ahmad, Tausif and Bustam, Mohamad Azmi and Zulfiqar, Muhammad and Moniruzzaman, Muhammad and Idris, Alamin and Iqbal, Jibran and Asghar, Hafiz Muhammad Anwaar and Ullah, Sami (2020) Controllable phytosynthesis of gold nanoparticles and investigation of their size and morphology-dependent photocatalytic activity under visible light. Journal of Photochemistry and Photobiology A: Chemistry, 392. p. 112429.

Ali, Md Korban and Moshikur, Rahman Md and Wakabayashi, Rie and Moniruzzaman, Muhammad and Kamiya, Noriho and Goto, Masahiro (2020) Biocompatible ionic liquid surfactant-based microemulsion as a potential carrier for sparingly soluble drugs. ACS Sustainable Chemistry & Engineering, 8 (16). pp. 6263-6272.

Ahmad, Tausif and Iqbal, Jibran and Bustam, Mohamad Azmi and Zulfiqar, Muhammad and Muhammad, Nawshad and Al Hajeri, Buthaina Mohamed and Irfan, Muhammad and Asghar, Hafiz Muhammad Anwaar and Ullah, Sami (2020) Phytosynthesis of cerium oxide nanoparticles and investigation of their photocatalytic potential for degradation of phenol under visible light. Journal of Molecular Structure, 1217. p. 128292.

Abunowara, Mustafa and Sufian, Suriati and Bustam, Mohamad Azmi and Eldemerdash, Usama and Suleman, Humbul and Bencini, Roberto and Assiri, Mohammed Ali and Ullah, Sami and Al-Sehemi, Abdullah G (2020) Experimental measurements of carbon dioxide, methane and nitrogen high-pressure adsorption properties onto Malaysian coals under various conditions. Energy, 210. p. 118575.

Aziz, A Rashid A and Baharom, MB and Abidin, Ezrann Zharif Zainal and Mohammed, Salah E and Nadhari, WN Azleen W and Jaffry, M Noraiman M (2020) Principal, design and characteristics of a free piston linear generator. Energy Efficiency in Mobility Systems. pp. 127-144.

Arman, Abdulwahid and Hagos, Ftwi Yohaness and Abdullah, Abdul Adam and Aziz, Abd Rashid Abd and Mamat, Rizalman and Cheng, Chin Kui and Vo, Dai-Viet N (2020) Kinetic and CFD Modeling of Exhaust Gas Reforming of Natural Gas in a Catalytic Fixed-Bed Reactor for Spark Ignition Engines. Chemical Engineering & Technology, 43 (4). pp. 705-718.

Azlan, N.A.N. and Lu, C.-K. and Elamvazuthi, I. and Tang, T.B. (2020) Automatic detection of masses from mammographic images via artificial intelligence techniques. IEEE Sensors Journal, 20 (21). pp. 13094-13102.

Alwasiti, H. and Yusoff, M.Z. and Raza, K. (2020) Motor Imagery Classification for Brain Computer Interface Using Deep Metric Learning. IEEE Access, 8. pp. 109949-109963.

Afridi, S. and Ahmed, U. and Gilal, A.R. and Jaafar, J. and Aziz, I.A. and Sandhu, M.Y. (2020) High Stop Band Rejection for Ceramic Loaded Waveguide Filters. IEEE Access, 8. pp. 109309-109314.

Alaloul, W.S. and Liew, M.S. and Zawawi, N.A.W.A. and Kennedy, I.B. (2020) Industrial Revolution 4.0 in the construction industry: Challenges and opportunities for stakeholders. Ain Shams Engineering Journal, 11 (1). pp. 225-230.

Abdullah, A.H. and Maoinser, M.A. and Rahim, E.A. (2020) Interaction Effect of Depth of Cut, Back Rake Angle and Rock Properties on Temperature of Single Polycrystalline Diamond Compact Cutter. International Journal of Engineering, Transactions B: Applications, 33 (11). pp. 2425-2435.

Alsaih, K. and Yusoff, M.Z. and Faye, I. and Tang, T.B. and Meriaudeau, F. (2020) Retinal Fluid Segmentation Using Ensembled 2-Dimensionally and 2.5-Dimensionally Deep Learning Networks. IEEE Access, 8. pp. 152452-152464.

Al-Tashi, Q. and Abdulkadir, S.J. and Rais, H.M. and Mirjalili, S. and Alhussian, H. (2020) Approaches to Multi-Objective Feature Selection: A Systematic Literature Review. IEEE Access, 8. pp. 125076-125096.

Alazzawi, A.K. and Rais, H.M. and Basri, S. (2020) HABC: Hybrid artificial bee colony for generating variable T-way test sets. Journal of Engineering Science and Technology, 15 (2). pp. 746-767.

Ali, M. and Ahmad, F. (2020) Influence of powder loading on rheology and injection molding of Fe-50Ni feedstocks. Materials and Manufacturing Processes, 35 (5). pp. 579-589.

Arumugam, T. and Karuppanan, S. and Ovinis, M. (2020) Finite element analyses of corroded pipeline with single defect subjected to internal pressure and axial compressive stress. Marine Structures, 72.

Althaf, M.S.M. and Hyun, L.J. and Ganat, T.A. and Habte, A.D. (2020) Injection period pressure transient behaviou r of two phase water oil flow: A semi analytical study. Journal of Mechanical Engineering and Sciences, 14 (2). pp. 6719-6733.

Abbas, S.S. and Nasif, M.S. and Al-Waked, R. and Meor Said, M.A. (2020) Numerical investigation on the effect of bileaflet mechanical heart valve's implantation tilting angle and aortic root geometry on intermittent regurgitation and platelet activation. Artificial Organs, 44 (2). E20-E39.

Ahmad, F and Yahaya, AS and Azmi, M and Muztaza, N (2020) Slope Failure Due to Effect of Damrey Typhoon in Penang Island. Lowland Technology International, 22 (1, Jun). pp. 35-39.

Abdul Majid, Noor Diana and M. Shariff, Azmi (2020) Incident investigation work-aid tool for process safety management compliance in process industries. Process safety progress, 39. e12113.

Athar, Muhammad and Shariff, Azmi M and Buang, Azizul and Hermansyah, Heri (2020) Equipment-based route index of inherent safety. Process safety progress, 39. e12108.

Azhar, A.N.H. and Panirselvam, M. and Amran, N.A. and Ruslan, M.S.H. and Samsuri, S. (2020) Retention of total phenolic content and antioxidant activity in the concentration of broccoli extract by progressive freeze concentration. International Journal of Food Engineering, 16 (10).

Aman, S.S. and Mohammed, B.S. and Wahab, M.A. and Anwar, A. (2020) Performance of reinforced concrete slab with opening strengthened using CFRP. Fibers, 8 (4).

Abdullah, M.A. and Albarody, T.M.B. and Hussein, A.R. (2020) Graphite thermal expansion coefficient measured by in-situ x-ray diffraction. Nanotechnology, 31 (28).

Ahmed, Tauseef and Ya, Hamdan H and Khan, Rehan and Hidayat Syah Lubis, Abdul Munir and Mahadzir, Shuhaimi (2020) Pseudo-ductility, morphology and fractography resulting from the synergistic effect of CaCO3 and bentonite in HDPE polymer nano composite. Materials, 13 (15). p. 3333.

Ahmed, Tauseef and Ya, HH and Mahadzir, Shuhaimi and Khan, Rehan and Alam, Muhammad Azad (2020) An overview: Mechanical and wear properties of hdpe polymer nanocomposites reinforced with treated/non-treated inorganic nanofillers. Advances in Manufacturing Engineering: Selected articles from ICMMPE 2019. pp. 231-241.

Arumugam, T. and Mohamad Rosli, M.K.A. and Karuppanan, S. and Ovinis, M. and Lo, M. (2020) Burst capacity analysis of pipeline with multiple longitudinally aligned interacting corrosion defects subjected to internal pressure and axial compressive stress. SN Applied Sciences, 2 (7).

Alaloul, W.S. and Liew, M.S. and Zawawi, N.A.W. and Mohammed, B.S. and Adamu, M. and Musharat, M.A. (2020) Structural equation modelling of construction project performance based on coordination factors. Cogent Engineering, 7 (1).

Akram, A. and Mustaffa, Z. and Badri Albarody, T.M. (2020) Burst capacity of pipe under corrosion defects and repaired with thermosetting liner. Steel and Composite Structures, 35 (2). pp. 171-186.

Alazzawi, A.K. and Rais, H.M. and Basri, S. (2020) HABC: Hybrid artificial bee colony for generating variable T-way test sets. Journal of Engineering Science and Technology, 15 (2). pp. 746-767.

Ahsan, S. and Lemma, T.A. and Gebremariam, M.A. (2020) Reliability analysis of gas turbine engine by means of bathtub-shaped failure rate distribution. Process Safety Progress, 39 (S1).

Al-Qadami, E.H.H. and Mustaffa, Z. and Abdurrasheed, A.S. and Yusof, K.W. and Shah, S.M.H. and Malek, M.A. and Ghani, A.A. (2020) Numerical assessment on floating stability limits for static vehicle under partial submergence. Journal of Engineering Science and Technology, 15 (2). pp. 1384-1398.

Abdul Karim, Z.A. and Kaur, E. and Syed Masharuddin, S.M. and Khan, M.Y. and Hagos, F.Y. (2020) The characteristics of water-in-biodiesel emulsions produced using ultrasonic homogenizer. Alexandria Engineering Journal, 59 (1). pp. 227-237.

Aljuboori, F.A. and Lee, J.H. and Elraies, K.A. and Stephen, K.D. (2020) Using low salinity waterflooding to improve oil recovery in naturally fractured reservoirs. Applied Sciences (Switzerland), 10 (12). pp. 1-21.

Algamili, A. and Ahmed, A. and Dennis, J. and Khir, M. and Mutharpavalar, A. (2020) Analytical modelling of the effect of squeeze film damping on the frequency and quality factor of a poly MUMPs resonator. Journal of Advanced Research in Dynamical and Control Systems, 12 (4 Spec). pp. 1634-1641.

Azmee, N.M. and Shafiq, N. (2020) Preparation of low cement ultra-high performance concrete. Lecture Notes in Civil Engineering, 54. pp. 331-336.

Al-Fakih, A. and Wahab, M.M.A. and Mohammed, B.S. and Liew, M.S. and Wan Abdullah Zawawi, N.A. and As'ad, S. (2020) Experimental study on axial compressive behavior of rubberized interlocking masonry walls. Journal of Building Engineering, 29.

Ali, M. and Room, S. and Khan, M.I. and Masood, F. and Ali Memon, R. and Khan, R. and Memon, A.M. (2020) Assessment of local earthen bricks in perspective of physical and mechanical properties using Geographical Information System in Peshawar, Pakistan. Structures, 28. pp. 2549-2561.

Al-Sabaeei, A.M. and Mustofa, B.A. and Sutanto, M.H. and Sunarjono, S. and Bala, N. (2020) Aging and rheological properties of latex and crumb rubber modified bitumen using dynamic shear rheometer. Journal of Engineering and Technological Sciences, 52 (3). pp. 385-398.

Abd Ghani, N.S. and Ibrahim, T. and Mohd Nor, N. (2020) Designing of a generator for wave energy conversion for outdoor activities. International Journal of Power Electronics and Drive Systems, 11 (3). pp. 1415-1422.

Al-Fakih, A. and Mohammed, B.S. and Wahab, M.M.A. and Liew, M.S. and Mugahed Amran, Y.H. (2020) Flexural behavior of rubberized concrete interlocking masonry walls under out-of-plane load. Construction and Building Materials, 263.

Alaloul, W.S. and Musarat, M.A. and Liew, M.S. and Zawawi, N.A.W.A. (2020) Influential Safety Performance and Assessment in Construction Projects: A Review. Lecture Notes in Civil Engineering, 53. pp. 719-728.

Alyan, E.A. and Saad, N.M. and Kamel, N.S. (2020) Effects of noisy workplace environments on the development of mental stress: FNIRS study. Journal of Advanced Research in Dynamical and Control Systems, 12 (4 Spec). pp. 1612-1619.

Alam, M.K. and Aziz, A.A. and Latif, S.A. and Awang, A. (2020) Error-aware data clustering for in-network data reduction in wireless sensor networks. Sensors (Switzerland), 20 (4).

Akhter, J. and Gilani, S.I. and Al-Kayiem, H.H. and Ali, M. and Masood, F. (2020) Experimental evaluation of thermophysical properties of oil-based titania nanofluids for medium temperature solar collectors Experimentelle EinschÃ¤tzung der thermophysikalischen Eigenschaften von Ã¶lbasierten Titandioxid-Nanofluiden fÃ¼r Mitteltemperatur-Solarkollektoren. Materialwissenschaft und Werkstofftechnik, 51 (6). pp. 792-802.

Ahmad, F. and Baig, A. and Dennis, J.O. and Hamid, N.H.B. and Md Khir, M.H.B. (2020) Characterization of MEMS comb capacitor. Microsystem Technologies, 26 (4). pp. 1387-1392.

Al-Quraishi, M.S. and Ishak, A.J. and Ahmad, S.A. and Hasan, M.K. and Elamvazuthi, I. (2020) Electromyography features combinations assessment using res index method during ankle joint movements. Journal of Advanced Research in Dynamical and Control Systems, 12 (4 Spec). pp. 1627-1633.

Awad, Ali and Alnarabiji, Mohamad S and Salam, Md A and Vo, Dai-Viet N and Setiabudi, Herma D and Abdullah, Bawadi (2020) Synthesis, Characterisation, and Performance Evaluation of Promoted Ni-Based Catalysts for Thermocatalytic Decomposition of Methane. ChemistrySelect, 5 (37). pp. 11471-11482.

Ameen, Mariam and Azizan, Mohammad Tazli and Ramli, Anita and Yusup, Suzana and Abdullah, Bawadi (2020) The effect of metal loading over Ni/γ-Al2O3 and Mo/γ-Al2O3 catalysts on reaction routes of hydrodeoxygenation of rubber seed oil for green diesel production. Catalysis Today, 355. pp. 51-64.

Ahmad, A. and Sakidin, H. and Dahlia, A. and Zetriuslita and Qudsi, R. (2020) Haze and its impact to paddy monitoring from remote sensing satellites. International Journal of Advanced Trends in Computer Science and Engineering, 9 (4). pp. 4939-4946.

Altahir, A.A. and Asirvadam, V.S. and Hamid, N.H.B. and Sebastian, P. and Hassan, M.A. and Saad, N.B. and Ibrahim, R. and Dass, S.C. (2020) Visual Sensor Placement Based on Risk Maps. IEEE Transactions on Instrumentation and Measurement, 69 (6). pp. 3109-3117.

Amirruddin, A. and Aziz, I.A. and Hasan, M.H. (2020) Auto-feed hyperparameter support vector regression prediction algorithm in handling missing values in oil and gas dataset. International Journal of Advanced Trends in Computer Science and Engineering, 9 (5). pp. 7157-7164.

Al-Jothery, H.K.M. and Albarody, T.M.B. and Yusoff, P.S.B.M. and Abdullah, M.A. and Hussein, A.R. and Pahmi, M.F.B.M. (2020) Crashworthiness design for trapezoid origami crash structure. International Journal of Automotive and Mechanical Engineering, 17 (1). pp. 7667-7674.

Aquil, M.A.I. and Ishak, W.H.W. (2020) Predicting software defects using machine learning techniques. International Journal of Advanced Trends in Computer Science and Engineering, 9 (4). pp. 6609-6616.

Ali, M. and Ahmad, F. and Malik, M.R.R. and Niazi, A.R. (2020) Fabrication of high magnetic performance Feâ��50Ni alloy by powder injection molding. Materials and Manufacturing Processes, 35 (14). pp. 1557-1566.

Aslam, M.Z. and Jeoti, V. and Manzoor, S. and Hanif, M. and Junaid, M. (2020) An aluminium nitride based multilayer structure for Love mode surface acoustic wave devices. Semiconductor Science and Technology, 35 (11).

Adnan, M.H.M. and Hassan, M.F. and Zulkefli, N.A.M. (2020) A framework of heterogeneous cloud service and multi attributes negotiation using double auction. International Journal of Advanced Trends in Computer Science and Engineering, 9 (3). pp. 3961-3969.

Arefin, A.A. and Hasan, K.N.M. and Romlie, M.F. and Abdullah, M.F. and Ali, M.N. and Othman, M.L. (2020) Determining islanding operation using micro grid phasor measurement unit parameters. International Journal of Emerging Trends in Engineering Research, 8 (1 Spec). pp. 97-101.

Agutaya, J.K.C.N. and Inoue, R. and Vin Tsie, S.S. and Quitain, A.T. and De La PeÃ±a-GarcÃa, J. and PÃ©rez-SÃ¡nchez, H. and Sasaki, M. and Kida, T. (2020) Metal-Free Synthesis of HMF from Glucose Using the Supercritical CO2-Subcritical H2O-Isopropanol System. Industrial and Engineering Chemistry Research, 59 (38). pp. 16527-16538.

Abbas, S.S. and Nasif, M.S. and Al-Waked, R. and Said, M.A.M. (2020) Numerical investigation on the relationship of cavitation initiation in bileaflet mechanical heart valves (BMHVs) with the aortic root geometry and valveâ��s implantation rotation angle. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42 (1).

Azid, I.A. and Ani, M.N.C. and Hamid, S.A.A. and Kamaruddin, S. (2020) Solving production bottleneck through time study analysis and quality tools integration. International Journal of Industrial Engineering : Theory Applications and Practice, 27 (1). pp. 13-27.

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Zoorob, S.E. and Usman, A. (2020) Influence of nanosilica particles on the high-temperature performance of waste denim fibre-modified bitumen. International Journal of Pavement Engineering.

Affendi, Nur Mahfuzah Noor and Mansor, Nurlidia and Mathialagan, Ranitha (2020) Development and characterization of allicin using palm stearin as a binder on urea granules. Journal of Plant Nutrition, 43 (5). pp. 621-628.

Ab-Samat, H. and Kamaruddin, S. (2020) Development of opportunistic maintenance policy towards optimal maintenance system (OPTOMS) model: A case study. Journal of Quality in Maintenance Engineering, 26 (1). pp. 129-165.

Alhawari, A.R.H. and Almawgani, A.H.M. and Alghamdi, H. and Hindi, A.T. and Saeidi, T. and Ismail, A. (2020) Omega-shaped tag antenna with inductively-coupled feeding using U-shaped stepped-impedance resonators for RFID applications. Applied Computational Electromagnetics Society Journal, 35 (8). pp. 951-961.

Aslam, M. and Rahim, L.A. and Hashmani, M. and Watada, J. (2020) Statistical comparison of architecture driven modernization with other cloud migration frameworks and formation of clusters. International Journal on Advanced Science, Engineering and Information Technology (1). pp. 112-119.

Athar, M. and Shariff, A.M. and Buang, A. and Hermansyah, H. (2020) Equipment-based route index of inherent safety. Process Safety Progress, 39 (S1).

Alhassan, A.M. and Badruddin, N. and Saad, N.M. and Aljunid, S.A. (2020) Theoretical bounds for the bit error rate for SAC OCDMA balanced detectors with multiple photodiodes. Photonic Network Communications, 40 (1). pp. 49-57.

Al-Fakih, A. and Mohammed, B.S. and Wahab, M.M.A. and Liew, M.S. and Mugahed Amran, Y.H. and Alyousef, R. and Alabduljabbar, H. (2020) Characteristic compressive strength correlation of rubberized concrete interlocking masonry wall. Structures, 26. pp. 169-184.

Abdul Majid, N.D. and M. Shariff, A. (2020) Incident investigation work-aid tool for process safety management compliance in process industries. Process Safety Progress, 39 (S1).

Al-Alimi, S. and Lajis, M.A. and Shamsudin, S. and Chan, B.L. and Mohammed, Y. and Ismail, A.E. and Sultan, N.M. (2020) Development of metal matrix composites and related forming techniques by direct recycling of light metals: A review. International Journal of Integrated Engineering, 12 (1). pp. 144-171.

Ariffin, M.M. and Aszemi, N.M. and Ismir, N. (2020) CHECKDYSCÂ©: Mobile game for early detection of dyscalculia signs in children. International Journal of Advanced Trends in Computer Science and Engineering, 9 (1.3 Sp). pp. 164-167.

Abdi, A. and Zarei, M. and Mehdinazar, M. and Akbarinia, F. and Nikbakht, E. (2020) Economic analysis based on the unit weight of hot mix asphalt. Engineering Solid Mechanics, 9 (1). pp. 93-100.

Arman, A. and Hagos, F.Y. and Abdullah, A.A. and Aziz, A.R.A. and Mamat, R. and Cheng, C.K. and Vo, D.-V.N. (2020) Kinetic and CFD Modeling of Exhaust Gas Reforming of Natural Gas in a Catalytic Fixed-Bed Reactor for Spark Ignition Engines. Chemical Engineering and Technology, 43 (4). pp. 705-718.

Aslam, M.Z. and Jeoti, V. and Karuppanan, S. and Pandian, M.S. and Ferrer, E.M. and Suresh, K. (2020) Surface acoustic wave modes characteristics of CMOS compatible SiO2/AlN/SiO2/Si multilayer structure with embedded electrodes. Sensors and Actuators, A: Physical, 313.

Alabri, S.D. and Kamaruddin, S. and Gilal, A.R. and Jaafar, J. and Aziz, I.A. (2020) The Moderation Influence of Power Distance on the Relationship between Technological Factors and the Successful Implementation of Citizen Relationship Management in the Public Sector. IEEE Access, 8. pp. 132446-132465.

Almalawi, A. and Fahad, A. and Tari, Z. and Khan, A.I. and Alzahrani, N. and Bakhsh, S.T. and Alassafi, M.O. and Alshdadi, A. and Qaiyum, S. (2020) Add-on anomaly threshold technique for improving unsupervised intrusion detection on SCADA data. Electronics (Switzerland), 9 (6). pp. 1-20.

Awais, M. and Ghayvat, H. and Krishnan Pandarathodiyil, A. and Nabillah Ghani, W.M. and Ramanathan, A. and Pandya, S. and Walter, N. and Naufal Saad, M. and Zain, R.B. and Faye, I. (2020) Healthcare professional in the loop (HPIL): Classification of standard and oral cancer-causing anomalous regions of oral cavity using textural analysis technique in autofluorescence imaging. Sensors (Switzerland), 20 (20). pp. 1-25.

Ali, M. and Jung, L.T. and Abdel-Aty, A.-H. and Abubakar, M.Y. and Elhoseny, M. and Ali, I. (2020) Semantic-k-NN algorithm: An enhanced version of traditional k-NN algorithm. Expert Systems with Applications, 151.

Abunowara, M. and Bustam, M.A. and Sufian, S. and Babar, M. and Eldemerdash, U. and Suleman, H. and Bencini, R. and Ullah, S. (2020) Characterization of Mukah-Balingian and Merit-Pila Coals before and after Subcritical CO2 Exposure Using Surface-Area Techniques. Journal of Environmental Engineering (United States), 146 (8).

Akhtar, M.N. and Ahmed, W. and Kakar, M.R. and Bakar, E.A. and Othman, A.R. and Bueno, M. (2020) Implementation of Parallel K-Means Algorithm to Estimate Adhesion Failure in Warm Mix Asphalt. Advances in Civil Engineering, 2020.

Alsariera, Y.A. and Adeyemo, V.E. and Balogun, A.O. and Alazzawi, A.K. (2020) AI Meta-Learners and Extra-Trees Algorithm for the Detection of Phishing Websites. IEEE Access, 8. pp. 142532-142542.

Alawi, O.A. and Kamar, H.M. and Mohammed, H.A. and Mallah, A.R. and Hussein, O.A. (2020) Energy efficiency of a flat-plate solar collector using thermally treated graphene-based nanofluids: Experimental study. Nanomaterials and Nanotechnology, 10.

Ali, M. and Jung, L.T. and Hosam, O. and Wagan, A.A. and Shah, R.A. and Khayyat, M. (2020) A new text-based w-distance metric to find the perfect match between words. Journal of Intelligent and Fuzzy Systems, 38 (3). pp. 2661-2672.

Al-Ashmori, Y.Y. and Othman, I. and Rahmawati, Y. and Amran, Y.H.M. and Sabah, S.H.A. and Rafindadi, A.D. and MikiÄ�, M. (2020) BIM benefits and its influence on the BIM implementation in Malaysia. Ain Shams Engineering Journal, 11 (4). pp. 1013-1019.

Aole, S. and Elamvazuthi, I. and Waghmare, L. and Patre, B. and Meriaudeau, F. (2020) Improved active disturbance rejection control for trajectory tracking control of lower limb robotic rehabilitation exoskeleton. Sensors (Switzerland), 20 (13). pp. 1-53.

Aldlemy, M.S. and Rasani, M.R. and Ariffin, A.K. and Ya, T.M.Y.S.T. (2020) Adaptive mesh refinement immersed boundary method for simulations of laminar flows past a moving thin elastic structure. Journal of Hydrodynamics, 32 (1). pp. 148-160.

Abdullah, L. and Goh, C. and Zamri, N. and Othman, M. (2020) Application of interval valued intuitionistic fuzzy TOPSIS for flood management. Journal of Intelligent and Fuzzy Systems, 38 (1). pp. 873-881.

Abunowara, M. and Sufian, S. and Bustam, M.A. and Eldemerdash, U. and Suleman, H. and Bencini, R. and Assiri, M.A. and Ullah, S. and Al-Sehemi, A.G. (2020) Experimental measurements of carbon dioxide, methane and nitrogen high-pressure adsorption properties onto Malaysian coals under various conditions. Energy, 210.

Al-Shatari, M.O.A. and Hussin, F.A. and Aziz, A.A. and Witjaksono, G. and Tran, X.-T. (2020) FPGA-Based Lightweight Hardware Architecture of the PHOTON Hash Function for IoT Edge Devices. IEEE Access, 8. pp. 207610-207618.

Al-Kaf, H.A.G. and Alduais, N.A.M. and Saad, A.-M.H.Y. and Chia, K.S. and Mohsen, A.M. and Alhussian, H. and Mahdi, A.A.M.H. and Salam, W.S.-I.W. (2020) A bootstrapping soft shrinkage approach and interval random variables selection hybrid model for variable selection in near-infrared spectroscopy. IEEE Access, 8. pp. 168036-168052.

Ali, A.M. and Rostami, A. and Yahya, N. (2020) Photon-magnon response to fluid variability and saturation levels in sandstone reservoirs. Journal of Geophysics and Engineering, 17 (6). pp. 1065-1074.

Arain, A.H. and Irawan, S. and Ibrahim, A. and Rajeswary, R. (2020) Experimental investigation of capillary threshold pressure in shale. International Journal of Advanced Science and Technology, 29 (1). pp. 129-140.

Al-Tashi, Q. and Abdulkadir, S.J. and Rais, H.M. and Mirjalili, S. and Alhussian, H. and Ragab, M.G. and Alqushaibi, A. (2020) Binary Multi-Objective Grey Wolf Optimizer for Feature Selection in Classification. IEEE Access, 8. pp. 106247-106263.

Arshad, N.I. and Hashim, A.S. and Mohd Ariffin, M. and Mohd Aszemi, N. and Low, H.M. and Norman, A.A. (2020) Robots as Assistive Technology Tools to Enhance Cognitive Abilities and Foster Valuable Learning Experiences among Young Children with Autism Spectrum Disorder. IEEE Access, 8. pp. 116279-116291.

Alabsi, S.S. and Ahmed, A.Y. and Dennis, J.O. and Khir, M.H.M. and Algamili, A.S. (2020) A Review of Carbon Nanotubes Field Effect-Based Biosensors. IEEE Access, 8. pp. 69509-69521.

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Usman, A. (2020) A systematic review of bio-asphalt for flexible pavement applications: Coherent taxonomy, motivations, challenges and future directions. Journal of Cleaner Production, 249.

Al-Dhahebi, A.M. and Gopinath, S.C.B. and Saheed, M.S.M. (2020) Graphene impregnated electrospun nanofiber sensing materials: a comprehensive overview on bridging laboratory set-up to industry. Nano Convergence, 7 (1).

Ali, S.M. and Sovuthy, C. and Imran, M.A. and Socheatra, S. and Abbasi, Q.H. and Abidin, Z.Z. (2020) Recent advances of wearable antennas in materials, fabrication methods, designs, and their applications: State-of-the-art. Micromachines, 11 (10).

Al-Amin, M. and Abdul Rani, A.M. and Abdu Aliyu, A.A. and Bryant, M.G. and Danish, M. and Ahmad, A. (2020) Bio-ceramic coatings adhesion and roughness of biomaterials through PM-EDM: a comprehensive review. Materials and Manufacturing Processes. pp. 1157-1180.

Al-Amin, M. and Abdul Rani, A.M. and Abdu Aliyu, A.A. and Abdul Razak, M.A. and Hastuty, S. and Bryant, M.G. (2020) Powder mixed-EDM for potential biomedical applications: A critical review. Materials and Manufacturing Processes. pp. 1789-1811.

Al-Amin, M. and Abdul-Rani, A.M. and Danish, M. and Thompson, H.M. and Abdu Aliyu, A.A. and Hastuty, S. and Zohura, F.T. and Bryant, M.G. and Rubaiee, S. and Rao, T.V.V.L.N. (2020) Assessment of PM-EDM cycle factors influence on machining responses and surface properties of biomaterials: A comprehensive review. Precision Engineering, 66. pp. 531-549.

Alshorman, O. and Irfan, M. and Saad, N. and Zhen, D. and Haider, N. and Glowacz, A. and Alshorman, A. (2020) A Review of Artificial Intelligence Methods for Condition Monitoring and Fault Diagnosis of Rolling Element Bearings for Induction Motor. Shock and Vibration, 2020.

Awang, M. and Fared, M.R.M.M. (2020) Preface. Lecture Notes in Civil Engineering, 59. v.

Abd Rahman, Siti Humairah Bt and Irawan, Sonny and Shafiq, Nasir and Rajeswary, Raja (2020) Investigating the expansion characteristics of geopolymer cement samples in a water bath and compared with the expansion of ASTM Class-G cement. HELIYON, 6 (2).

Abbas, Abdelazim and Saaid, Ismail Mohamed and Shafian, S. R. Mohd (2020) Novel Relative Permeability Modifier using Polymer Grafted Nanoclay. ENERGY & FUELS, 34 (3). pp. 2703-2709.

Almomani, M.A. and Basri, S. and Almomani, O. and Capretz, L.F. and Balogun, A. and Husni, M. and Gilal, A.R. (2020) Using an Expert Panel to Validate the Malaysian SMEs-Software Process Improvement Model (MSME-SPI). Advances in Intelligent Systems and Computing, 1294. pp. 844-859.

Ahmed, T. and Ya, H.H. and Mahadzir, S. and Khan, R. and Alam, M.A. (2020) An overview: Mechanical and wear properties of hdpe polymer nanocomposites reinforced with treated/non-treated inorganic nanofillers. Lecture Notes in Mechanical Engineering. pp. 231-241.

Al-Yacouby, A.M. and Halim, E.R.B.A. and Liew, M.S. (2020) Hydrodynamic analysis of floating offshore solar farms subjected to regular waves. Lecture Notes in Mechanical Engineering. pp. 375-390.

Azizan, N.L. and Irawan, R. and Liew, M.S. and Al-Yacouby, A.M. and Danyaro, K.U. (2020) Experimental studies of fpso responses with validation by numerical and artificial neural network prediction. Lecture Notes in Mechanical Engineering. pp. 469-482.

Alam, M.A. and Ya, H.H. and Hussain, P.B. and Azeem, M. and Sapuan, S.M. and khan , R. and Ahamad, T. (2020) Experimental investigations on the surface hardness of synthesized polystyrene/zno nanocomposites. Lecture Notes in Mechanical Engineering. pp. 345-352.

Ahmad, R.K. and Sulaiman, S.A. and Inayat, M. and Umar, H.A. (2020) Effects of process conditions on calorific value and yield of charcoal produced from pyrolysis of coconut shells. Lecture Notes in Mechanical Engineering. pp. 253-262.

Abu Seman, A.H. and Ahmad, R. and Alhassan Alhussian, H.S. (2020) Factors Influencing Acceptance of Technology by Senior Citizens: A Systematic Review. Advances in Intelligent Systems and Computing, 1224 A. pp. 352-365.

Al-Yacouby, A.M. and Halim, E.R.B.A. and Liew, M.S. (2020) Hydrodynamic analysis of floating offshore solar farms subjected to regular waves. Lecture Notes in Mechanical Engineering. pp. 375-390.

Aminu Ghali, A. and Ahmad, R. and Alhussian, H.S.A. (2020) Comparative Analysis of DoS and DDoS Attacks in Internet of Things Environment. Advances in Intelligent Systems and Computing, 1225 A. pp. 183-194.

Asnawi, K.F.B.A. and Lemma, T.A. (2020) Analysis of the impact of degradation on gas turbine performance using the support vector machine (svm) method. Lecture Notes in Mechanical Engineering. pp. 441-451.

Abed, S.A. and Rais, H.M. (2020) Solving the minimum dominating set problem of partitioned graphs using a hybrid bat algorithm. Advances in Intelligent Systems and Computing, 1073. pp. 386-395.

Alazzawi, A.K. and Rais, H.M. and Basri, S. and Alsariera, Y.A. (2020) Pairwise Test Suite Generation Based on Hybrid Artificial Bee Colony Algorithm. Lecture Notes in Electrical Engineering, 619. pp. 137-145.

Al-Yacouby, A.M. and Liew, M.S. (2020) Parametric Study of Hydrodynamic Coefficients for Circular Cylinders at Subcritical Reynolds Number. Lecture Notes in Mechanical Engineering. pp. 217-224.

Ahmad, F. and Mohammad, M. and Muhsan, A.S. and Ali, M. and Naseer, A. and Aslam, M. and Malik, M.R.R. (2020) Effect of Thermal Cycling on Thermal Conductivity of Powder Injection Moulded MWCNT Reinforced Copper Matrix Composites. Lecture Notes in Mechanical Engineering. pp. 377-387.

Ayoub, M.A. and Mohyaldinn, M.E. and Manalo, A. and Hassan, A.M. and Ahmed, Q.A. (2020) A New Model for Predicting Minimum Miscibility Pressure (MMP) in Reservoir-Oil/Injection Gas Mixtures Using Adaptive Neuro Fuzzy Inference System. Lecture Notes in Mechanical Engineering. pp. 527-545.

Athar, M. and Shariff, A.M. and Buang, A. (2020) Integrated Safety and Process Economics Approach for Sustainable Process Design of Process Piping. Lecture Notes in Mechanical Engineering. pp. 145-154.

Ali, S.M. and Jeoti, V. and Saeidi, T. and Nozad Mahmood, S. and Zainal Abidin, Z. and Rehman, M. (2020) Design of Dual-Band Wearable Crescent-Shaped Button Antenna for WLAN Applications. Lecture Notes in Networks and Systems, 118. pp. 457-464.

Ayinla, R.T. and John, O.D. and Hasnah, B.T.M.Z. and Fahad, U. and Asfand, Y. (2020) Effect of particle size on the physical properties of activated palm kernel shell for supercapacitor application. Key Engineering Materials, 833 KE. pp. 129-133.

Ahamad, M.S.S. and Ahmad, R. and Matori, A.N. (2020) Preference Assessment and Prioritization of the Urban Green Space Features Using Qualitative Evaluation and AHP Decision Model. Lecture Notes in Civil Engineering, 53. pp. 47-69.

Azmee, N.M. and Shafiq, N. (2020) Preparation of low cement ultra-high performance concrete. Lecture Notes in Civil Engineering, 54. pp. 331-336.

Amir, A.N. and Alhussian, H. and Hayder, G. and Basri, S. and Jadid, S. (2020) Smart water quality IoT-based system for healthy living. Journal of Green Engineering, 10 (12). pp. 13299-13310.

Adil, M. and Lee, K. and Zaid, H.M. and Shukur, M.F.A. and Manaka, T. (2020) Effect of nanoparticles concentration on electromagnetic-assisted oil recovery using ZnO nanofluids. PLoS ONE, 15 (12 Dec).

Amen, R. and Yaseen, M. and Mukhtar, A. and KlemeÅ¡, J.J. and Saqib, S. and Ullah, S. and Al-Sehemi, A.G. and Rafiq, S. and Babar, M. and Fatt, C.L. and Ibrahim, M. and Asif, S. and Qureshi, K.S. and Akbar, M.M. and Bokhari, A. (2020) Lead and cadmium removal from wastewater using eco-friendly biochar adsorbent derived from rice husk, wheat straw, and corncob. Cleaner Engineering and Technology, 1.

Ajeng, A.A. and Abdullah, R. and Malek, M.A. and Chew, K.W. and Ho, Y.-C. and Ling, T.C. and Lau, B.F. and Show, P.L. (2020) The effects of biofertilizers on growth, soil fertility, and nutrients uptake of oil palm (Elaeis guineensis) under greenhouse conditions. Processes, 8 (12). pp. 1-16.

Arifin, M.H. and Kayode, J.S. and Ismail, K.I. and Abdullah, M. and Embrandiri, A. and Nazer, S.M. and Azmi, A. (2020) Data for the industrial and municipal environmental wastes hazard contaminants assessment with integration of RES2D techniques and Oasis Montaj software. Data in Brief, 33.

Abro, G.E.M. and Asirvadam, V.S. and Bin Mohd Zulkifli, S.A. and Sattar, A. and Kumar, D. and Anwer, A. (2020) Effects of unmodelled dynamic factors on an under-actuated quadrotor: A review of hybrid observer design methods. Measurement and Control (United Kingdom), 53 (9-10). pp. 1978-1987.

Abdul Rahim, A.R. and Mohsin, H.M. and Thanabalan, M. and Rabat, N.E. and Saman, N. and Mat, H. and Johari, K. (2020) Effective carbonaceous desiccated coconut waste adsorbent for application of heavy metal uptakes by adsorption: Equilibrium, kinetic and thermodynamics analysis. Biomass and Bioenergy, 142.

Ali, A. and Ilyas, S.U. and Garg, S. and Alsaady, M. and Maqsood, K. and Nasir, R. and Abdulrahman, A. and Zulfiqar, M. and Mahfouz, A.B. and Ahmed, A. and Ridha, S. (2020) Dynamic viscosity of Titania nanotubes dispersions in ethylene glycol/water-based nanofluids: Experimental evaluation and predictions from empirical correlation and artificial neural network. International Communications in Heat and Mass Transfer, 118.

Azad, A.S. and A. Rahaman, M.S. and Watada, J. and Vasant, P. and Vintaned, J.A.G. (2020) Optimization of the hydropower energy generation using Meta-Heuristic approaches: A review. Energy Reports, 6. pp. 2230-2248.

Abdulkadir, B.A. and Dennis, J.O. and Fadhlullah Bin Abd. Shukur, M. and Elsayed Nasef, M.M. and Usman, F. (2020) Preparation and characterization of gel polymer electrolyte based on PVA-K2CO3. Polymer-Plastics Technology and Materials, 59 (15). pp. 1679-1697.

Adamu, M. and Mohammed, B.S. and Shafiq, N. and Liew, M.S. (2020) Durability performance of high volume fly ash roller compacted concrete pavement containing crumb rubber and nano silica. International Journal of Pavement Engineering, 21 (12). pp. 1437-1444.

Alqasem, B. and Sikiru, S. and Ali, E.M. and Elraies, K.A. and Yahya, N. and Rostami, A. and Ganeson, M. and Nyuk, C.M. and Qureshi, S. (2020) Effect of electromagnetic energy on net spin orientation of nanocatalyst for enhanced green urea synthesis. Journal of Materials Research and Technology, 9 (6). pp. 16497-16512.

Awad, A. and Alnarabiji, M.S. and Salam, M.A. and Vo, D.-V.N. and Setiabudi, H.D. and Abdullah, B. (2020) Synthesis, Characterisation, and Performance Evaluation of Promoted Ni-Based Catalysts for Thermocatalytic Decomposition of Methane. ChemistrySelect, 5 (37). pp. 11471-11482.

Amir, Z. and Mohd Saaid, I. and Mohamed Jan, B. and Khalil, M. and Abdul Patah, M.F. and Wan Bakar, W.Z. (2020) The retardation of polyacrylamide by ammonium chloride in high-salinity and high-temperature conditions: molecular analysis. Polymer Bulletin, 77 (10). pp. 5469-5487.

Alam, S.S. and Ahmad, M. and Ho, Y.-H. and Omar, N.A. and Lin, C.-Y. (2020) Applying an extended theory of planned behavior to sustainable food consumption. Sustainability (Switzerland), 12 (20). pp. 1-14.

Al-Kayiem, H.H. and Koh, K. and Riyadi, T.W.B. and Effendy, M. (2020) A comparative review on greenery ecosystems and their impacts on sustainability of building environment. Sustainability (Switzerland), 12 (20). pp. 1-26.

Ali, R.F. and Dominic, P.D.D. and Ali, K. (2020) Organizational governance, social bonds and information security policy compliance: a perspective towards oil and gas employees. Sustainability (Switzerland), 12 (20). pp. 1-27.

Ahmad, T. and Iqbal, J. and Bustam, M.A. and Zulfiqar, M. and Muhammad, N. and Al Hajeri, B.M. and Irfan, M. and Anwaar Asghar, H.M. and Ullah, S. (2020) Phytosynthesis of cerium oxide nanoparticles and investigation of their photocatalytic potential for degradation of phenol under visible light. Journal of Molecular Structure, 1217.

Ali, A.M. and Yahya, N. and Mijinyawa, A. and Kwaya, M.Y. and Sikiru, S. (2020) Molecular simulation and microtextural characterization of quartz dissolution in sodium hydroxide. Journal of Petroleum Exploration and Production Technology, 10 (7). pp. 2669-2684.

Al-Kayiem, H.H. and Hamza, J.E. and Lemmu, T.A. (2020) Performance enhancement of axial concurrent liquidâ��liquid hydrocyclone separator through optimization of the swirler vane angle. Journal of Petroleum Exploration and Production Technology, 10 (7). pp. 2957-2967.

Alsaih, K. and Yusoff, M.Z. and Tang, T.B. and Faye, I. and MÃ©riaudeau, F. (2020) Deep learning architectures analysis for age-related macular degeneration segmentation on optical coherence tomography scans. Computer Methods and Programs in Biomedicine, 195.

Adil, M. and Lee, K.C. and Zaid, H.M. and Manaka, T. (2020) Role of phase-dependent dielectric properties of alumina nanoparticles in electromagnetic-assisted enhanced oil recovery. Nanomaterials, 10 (10). pp. 1-32.

Ali, S. and Abdul Rani, A.M. and Baig, Z. and Ahmed, S.W. and Hussain, G. and Subramaniam, K. and Hastuty, S. and Rao, T.V.V.L.N. (2020) Biocompatibility and corrosion resistance of metallic biomaterials. Corrosion Reviews, 38 (5). pp. 381-402.

Ameen, M. and Azizan, M.T. and Ramli, A. and Yusup, S. and Abdullah, B. (2020) The effect of metal loading over Ni/Î³-Al2O3 and Mo/Î³-Al2O3 catalysts on reaction routes of hydrodeoxygenation of rubber seed oil for green diesel production. Catalysis Today, 355. pp. 51-64.

Ahmad, W. and Ali, M. and Sheikh, N.A. and Akhtar, J. (2020) Effect of efficient multi-stage indirect evaporative cooling on performance of solar assisted desiccant air conditioning in different climatic zones. Heat and Mass Transfer/Waerme- und Stoffuebertragung, 56 (9). pp. 2725-2741.

Abdulkareem, F.A. and Radman, A. and Faugere, G. and Sathiavelu, S. and Irfan, S.A. and Padmanabhan, E. (2020) Petro-physical properties of Marcellus shale samples and their impact on CO2 adsorption: Equilibrium, kinetics, and empirical modeling study. Journal of Natural Gas Science and Engineering, 81.

Aljuboori, F.A. and Lee, J.H. and Elraies, K.A. and Stephen, K.D. (2020) Effect of fracture characteristics on history matching in the Qamchuqa reservoir: a case study from Iraq. Carbonates and Evaporites, 35 (3).

Abdulelah, H. and Negash, B.M. and Yekeen, N. and Al-Hajri, S. and Padmanabhan, E. and Al-Yaseri, A. (2020) Synergetic effect of surfactant concentration, salinity, and pressure on adsorbed methane in shale at low pressure: An experimental and modeling study. ACS Omega, 5 (32). pp. 20107-20121.

Al-Musawi, H.M. and Farnoosh, A. (2020) OPTIMAL INVESTMENT SCENARIOS FOR THE POWER GENERATION MIX DEVELOPMENT OF IRAQ. Journal of Energy and Development, 46 (1). pp. 47-62.

Alwani Shafie, S.N. and Mukmin Marzuki, M.A. and Md Nordin, N.A.H. and Bilad, M.R. and Sazali, N. and Ismail, N.M. and Ismail, A.F. (2020) Performance and characterizations of EMIMTf2N and silica direct blending in mixed matrix membrane for CO2/CH4 separation. Journal of Membrane Science and Research, 6 (4). pp. 395-400.

Ahmed, S.W. and Hussain, G. and Altaf, K. and Ali, S. and Alkahtani, M. and Abidi, M.H. and Alzabidi, A. (2020) On the effects of process parameters and optimization of interlaminate bond strength in 3D printed ABS/CF-PLA composite. Polymers, 12 (9).

Aljuboori, F.A. and Lee, J.H. and Elraies, K.A. and Stephen, K.D. (2020) The effectiveness of low salinity waterflooding in naturally fractured reservoirs. Journal of Petroleum Science and Engineering, 191.

Ali, A.M. and Yahya, N. and Qureshi, S. (2020) Interactions of ferro-nanoparticles (hematite and magnetite) with reservoir sandstone: implications for surface adsorption and interfacial tension reduction. Petroleum Science, 17 (4). pp. 1037-1055.

Abbasi, A.Z. and Nisar, S. and Rehman, U. and Ting, D.H. (2020) Impact of HEXACO Personality Factors on Consumer Video Game Engagement: A Study on eSports. Frontiers in Psychology, 11.

Ahmed, T. and Ya, H.H. and Khan, R. and Lubis, A.M.H.S. and Mahadzir, S. (2020) Pseudo-ductility, morphology and fractography resulting from the synergistic effect of CaCO3 and bentonite in HDPE polymer nano composite. Materials, 13 (15).

Ajab, H. and Yaqub, A. and Nazir, M.S. and Rozaini, M.Z.H. and Abdullah, M.A. (2020) Optimization of oil palm-based cellulose and hydroxyapatite-carbon composite electrode for trace Pb(II) ions detection in aqueous system. BioResources, 15 (3). pp. 6273-6281.

Alam, M.A. and Ya, H.H. and Azeem, M. and Hussain, P.B. and Salit, M.S.B. and Khan, R. and Arif, S. and Ansari, A.H. (2020) Modelling and optimisation of hardness behaviour of sintered Al/SiC composites using RSM and ANN: A comparative study. Journal of Materials Research and Technology, 9 (6). pp. 14036-14050.

Al-Bared, M.A.M. and Harahap, I.S.H. and Marto, A. and Mohamad, H. and Alavi Nezhad Khalil Abad, S.V. and Mustaffa, Z. (2020) Cyclic behavior of RT-cement treated marine clay subjected to low and high loading frequencies. Geomechanics and Engineering, 21 (5). pp. 433-445.

Abbas, G. and Irawan, S. and Memon, K.R. and Khan, J. (2020) Application of cellulose-based polymers in oil well cementing. Journal of Petroleum Exploration and Production Technology, 10 (2). pp. 319-325.

Ang, T.-H. and Kiatkittipong, K. and Kiatkittipong, W. and Chua, S.-C. and Lim, J.W. and Show, P.-L. and Bashir, M.J.K. and Ho, Y.-C. (2020) Insight on extraction and characterisation of biopolymers as the green coagulants for microalgae harvesting. Water (Switzerland), 12 (5).

Adnan, N. and Nordin, S.M. and Anwar, A. (2020) Transition pathways for Malaysian paddy farmers to sustainable agricultural practices: An integrated exhibiting tactics to adopt Green fertilizer. Land Use Policy, 90.

Ariffin, E.H. and Zulfakar, M.S.Z. and Redzuan, N.S. and Mathew, M.J. and Akhir, M.F. and Baharim, N.B. and Awang, N.A. and Mokhtar, N.A. (2020) Evaluating the effects of beach nourishment on littoral morphodynamics at kuala nerus, terengganu (Malaysia). Journal of Sustainability Science and Management, 15 (5). pp. 29-42.

Albar, M.M.J. and Ramli, N. and Jamion, N.A. and Baharin, S.N.A. and Marimuthu, T. and Sambasevam, K.P. (2020) Fabrication of ammonia gas sensor based on polyaniline/mussel shell composite. ASM Science Journal, 13 (Specia). pp. 105-110.

Ahmad, T. and Basheer, C. and Saad, B. (2020) Chapter 13: Derivatization Strategies for the Determination of Biogenic Amines with Chromatographic Techniques. Food Chemistry, Function and Analysis, 2020-J (20). pp. 239-267.

Azizi, A. and Johns, M.L. and Aman, Z.M. and May, E.F. and Ling, N.N.A. and Husin, H. (2020) Effect of hydrate anti-agglomerants on water-in-crude oil emulsion stability. Journal of Petroleum Exploration and Production Technology, 10 (1). pp. 139-148.

Amirruddin, A and Aziz, IA and Hasan, MH (2020) Auto-feed hyperparameter support vector regression prediction algorithm in handling missing values in oil and gas dataset. International Journal of Advanced Trends in Computer Science and Engineering, 9 (5). pp. 7157-7164.

Afridi, Sharjeel and Ahmed, Usman and Gilal, Abdul Rehman and Jaafar, Jafreezal and Aziz, Izzatdin Abdul and Sandhu, Muhammad Yameen (2020) High stop band rejection for ceramic loaded waveguide filters. IEEE Access, 8. pp. 109309-109314.

Alabri, Shafiq Darwish and Kamaruddin, Suzilawati and Gilal, Abdul Rehman and Jaafar, Jafreezal and Aziz, Izzatdin Abdul (2020) The moderation influence of power distance on the relationship between technological factors and the successful implementation of citizen relationship management in the public sector. IEEE Access, 8. pp. 132446-132465.

Alsaih, Khaled and Yusoff, Mohd Zuki and Faye, Ibrahima and Tang, Tong Boon and Meriaudeau, Fabrice (2020) Retinal fluid segmentation using ensembled 2-dimensionally and 2.5-dimensionally deep learning networks. IEEE Access, 8. pp. 152452-152464.

Azlan, Nur Aainaa Nadirah and Lu, Cheng-Kai and Elamvazuthi, Irraivan and Tang, Tong Boon (2020) Automatic detection of masses from mammographic images via artificial intelligence techniques. IEEE Sensors Journal, 20 (21). pp. 13094-13102.

Alsaih, Khaled and Yusoff, Mohd Zuki and Tang, Tong Boon and Faye, Ibrahima and Mériaudeau, Fabrice (2020) Deep learning architectures analysis for age-related macular degeneration segmentation on optical coherence tomography scans. Computer methods and programs in biomedicine, 195. p. 105566.

B

Baharuddin, Siti Hawatulaila and Mustahil, Noorul Adawiyah and Reddy, Ambavaram Vijaya Bhaskar and Abdullah, Atikah Aini and Mutalib, Mohamed Ibrahim Abdul and Moniruzzaman, Muhammad (2020) Development, formulation and optimization of a novel biocompatible ionic liquids dispersant for the effective oil spill remediation. Chemosphere, 249. p. 126125.

Babar, Muhammad and Bustam, Mohamad Azmi and Maulud, Abdulhalim Shah and Ali, Abulhassan and Mukhtar, Ahmad and Ullah, Sami (2020) Enhanced cryogenic packed bed with optimal CO2 removal from natural gas; a joint computational and experimental approach. Cryogenics, 105. p. 103010.

Belhaj, A.F. and Aris B M Shuhli, J. and Elraies, K.A. and Mahmood, S.M. and Maulianda, B. and Alnarabiji, M.S. (2020) Partitioning behaviour of novel surfactant mixture for high reservoir temperature and high salinity conditions. Energy, 198.

Belazreg, L. and Mahmood, S.M. and Aulia, A. (2020) Random forest algorithm for co2 water alternating gas incremental recovery factor prediction. International Journal of Advanced Science and Technology, 29 (1). pp. 168-188.

Bala, N. and Napiah, M. and Kamaruddin, I. (2020) Nanosilica composite asphalt mixtures performance-based design and optimisation using response surface methodology. International Journal of Pavement Engineering, 21 (1). pp. 29-40.

Babar, Muhammad and Bustam, Mohamad Azmi and Ali, Abul Hassan and Maulud, Abdulhalim Shah and Abdulrahman, Aymn (2020) The Freeze-Out Effect of and Composition Critical Locus on CO of 2 Binary CO2--CH4 Mixture. Advances in Manufacturing Engineering: Selected articles from ICMMPE 2019. p. 1.

Bakar, M.A.A. and Mustaffa, Z. (2020) Quasi-static indentation of reinforced thermoplastic pipe (RTP). International Journal of Sustainable Construction Engineering and Technology, 11 (1). pp. 53-63.

Bin Tamrin, M.S. and Ahmad, M.R. (2020) Simulation of adaptive power management circuit for hybrid energy harvester and real-time sensing application. International Journal of Power Electronics and Drive Systems, 11 (2). pp. 658-666.

Bhattacharjee, S. and Rahim, L.B.A. and Watada, J. and Roy, A. (2020) Unified GPU Technique to Boost Confidentiality, Integrity and Trim Data Loss in Big Data Transmission. IEEE Access, 8. pp. 45477-45495.

Badardin, N.A. and Mokhtar, A.A. and Sallih, N. and Ishak, M.H.I. (2020) VIBRATION CHARACTERISTICS STUDY OF DIFFERENT PIPE LENGTH WITH DIFFERENT END CONDITIONS. ARPN Journal of Engineering and Applied Sciences, 15 (21). pp. 2364-2374.

Baharom, R. and Rahman, N.F.A. and Hidayat, M.N. and Muhammad, K.S. and Seroji, M.N. and Yahaya, N.Z. (2020) A new gate drive for a single-phase matrix converter. International Journal of Power Electronics and Drive Systems, 11 (2). pp. 823-826.

bin Kamaruzzaman, M.Y. and bin Zakariah, M.N.A. and Fudholi, A. (2020) REGIONAL GRAVITY STUDY OF PERAK, MALAYSIA USING SATELLITE ACQUIRED DATA. ARPN Journal of Engineering and Applied Sciences, 15 (18). pp. 1988-1993.

Bong, J.T. and Loy, A.C.M. and Chin, B.L.F. and Lam, M.K. and Tang, D.K.H. and Lim, H.Y. and Chai, Y.H. and Yusup, S. (2020) Artificial neural network approach for co-pyrolysis of Chlorella vulgaris and peanut shell binary mixtures using microalgae ash catalyst. Energy, 207.

Bala, N. and Napiah, M. (2020) Fatigue life and rutting performance modelling of nanosilica/polymer composite modified asphalt mixtures using Weibull distribution. International Journal of Pavement Engineering, 21 (4). pp. 497-506.

Bajeh, A.O. and Oluwatosin, O.-J. and Basri, S. and Akintola, A.G. and Balogun, A.O. (2020) Object-oriented measures as testability indicators: An empirical study. Journal of Engineering Science and Technology, 15 (2). pp. 1092-1108.

Basha, M.H. and Sulaiman, S.A. and Uemura, Y. (2020) Co-gasification of palm kernel shell and polystyrene plastic: Effect of different operating conditions. Journal of the Energy Institute, 93 (3). pp. 1045-1052.

Balogun, A.-L. and Marks, D. and Sharma, R. and Shekhar, H. and Balmes, C. and Maheng, D. and Arshad, A. and Salehi, P. (2020) Assessing the Potentials of Digitalization as a Tool for Climate Change Adaptation and Sustainable Development in Urban Centres. Sustainable Cities and Society, 53.

Bakthavatchalam, B. and Habib, K. and Saidur, R. and Shahabuddin, S. and Saha, B.B. (2020) Influence of solvents on the enhancement of thermophysical properties and stability of multi-walled carbon nanotubes nanofluid. Nanotechnology, 31 (23).

Badri, R.M. and Al kaissi, Z.A. and Sutanto, M. and Alobaidi, M.K. (2020) Investigating the rheological properties of asphalt binder incorporating different crumb rubber contents based on a response surface methodology. Journal of King Saud University - Engineering Sciences.

Ba Hashwan, S.S. and Khir, M.H.B.M. and Al-Douri, Y. and Ahmed, A.Y. (2020) Recent progress in the development of biosensors for chemicals and pesticides detection. IEEE Access, 8. pp. 82514-82527.

Bilad, M.R. and Mat Nawi, N.I. and Subramaniam, D.D. and Shamsuddin, N. and Khan, A.L. and Jaafar, J. and Nandiyanto, A.B.D. (2020) Low-pressure submerged membrane filtration for potential reuse of detergent and water from laundry wastewater. Journal of Water Process Engineering, 36.

Bakthavatchalam, B. and Habib, K. and Saidur, R. and Aslfattahi, N. and Rashedi, A. (2020) Investigation of electrical conductivity, optical property, and stability of 2D MXene nanofluid containing ionic liquids. Applied Sciences (Switzerland), 10 (24). pp. 1-20.

Bheel, N. and Abbasi, S.A. and Awoyera, P. and Olalusi, O.B. and Sohu, S. and Rondon, C. and EcheverriÃ¡, A.M. (2020) Fresh and hardened properties of concrete incorporating binary blend of metakaolin and ground granulated blast furnace slag as supplementary cementitious material. Advances in Civil Engineering, 2020.

Bani, S.M. and Saaid, M. and Saad, B. (2020) An In Situ Dansylation Ultrasound-Assisted Dispersive Liquid-Liquid Microextraction Based on Ionic Liquid for Determination of Biogenic Amines in Foods. Food Analytical Methods, 13 (2). pp. 568-577.

Bala, A. and Ismail, I. and Ibrahim, R. and Sait, S.M. and Oliva, D. (2020) An Improved Grasshopper Optimization Algorithm Based Echo State Network for Predicting Faults in Airplane Engines. IEEE Access, 8. pp. 159773-159789.

Bashir, Y. and Muztaza, N.M. and Alashloo, S.Y.M. and Ali, S.H. and Ghosh, D.P. (2020) Inspiration for seismic diffraction modelling, separation, and velocity in depth imaging. Applied Sciences (Switzerland), 10 (12).

Bakthavatchalam, B. and Habib, K. and Hussein, O.A. and Saidur, R. and Irshad, K. (2020) Heat Transfer Rate Optimisation of Ionanofluid Based Heat Sink Using ANSYS. International Journal of Automotive and Mechanical Engineering, 17 (4). pp. 8326-8337.

Buyong, M.R. and Larki, F. and Hakimi Zainal, M.I. and Almahi, A.Y.A. and Ismail, A.G. and Hamzah, A.A. and Kayani, A.A.K. and Caille, C.E. and Yeop Majlis, B. (2020) Implementation of capacitance as simultaneous sensing and actuating tool in tapered microelectrode arrays for dielectrophoresis-on-a-chip application. Microelectronics International, 37 (4). pp. 215-224.

Bou-Rabee, M. and Lodi, K.A. and Ali, M. and Ansari, M.F. and Tariq, M. and Sulaiman, S.A. (2020) One-month-ahead wind speed forecasting using hybrid AI model for coastal locations. IEEE Access, 8. pp. 198482-198493.

Baba, M. and Nor, N.B.M. and Ibrahim, T.B. and Sheikh, M.A. (2020) A comprehensive review for optimal placement of phasor measurement unit for network observability. Indonesian Journal of Electrical Engineering and Computer Science, 19 (1). pp. 301-308.

Bingi, K. and Ibrahim, R. and Karsiti, M.N. and Hassan, S.M. and Harindran, V.R. (2020) Preface. Studies in Systems, Decision and Control, 264. vii-x.

Bingi, K. and Ibrahim, R. and Karsiti, M.N. and Hassan, S.M. and Harindran, V.R. (2020) Introduction. Studies in Systems, Decision and Control, 264. pp. 1-5.

Bashiri, R. and Mohamed, N. M. and Sufian, S. and Kait, C. F. (2020) Improved photoelectrochemical hydrogen production over decorated titania with copper and nickel oxides by optimizing the photoanode and reaction characteristics. MATERIALS TODAY CHEMISTRY, 16.

Bhayo, B.A. and Al-Kayiem, H.H. and Gilani, S.I.U. (2020) A framework for the optimal sizing of hybrid solar pv-battery-hydro system for a rural house in malaysia. Lecture Notes in Mechanical Engineering. pp. 733-740.

Babar, M. and Bustam, M.A. and Ali, A.H. and Maulud, A.S. and Abdulrahman, A. (2020) The effect of composition on CO2 Freeze-Out and Critical Locus of Binary CO2â��CH4 Mixture. Lecture Notes in Mechanical Engineering. pp. 1-10.

Balogun, A.O. and Basri, S. and Jadid, S.A. and Mahamad, S. and Al-momani, M.A. and Bajeh, A.O. and Alazzawi, A.K. (2020) Search-Based Wrapper Feature Selection Methods in Software Defect Prediction: An Empirical Analysis. Advances in Intelligent Systems and Computing, 1224 A. pp. 492-503.

Baharudin, B.A. and Hussain, P. and Mustapha, M. and Ayob, F. and Ismail, A. and Ab Rahman, F. and Khalid, P.Z.M. and Hamid, D.A. and Rojan, M.A. (2020) Tensile Properties of Diffusion Bonded Duplex Stainless Steel to Low Carbon Steel. Lecture Notes in Mechanical Engineering. pp. 333-338.

Babar, M. and Bustam, M.A. and Ali, A. and Maulud, A.S. (2020) Optimization of cryogenic carbon dioxide removal from CO2-CH4 system by response surface methodology. Materials Science Forum, 997 MS. pp. 103-110.

Basri, S. and Almomani, M.A. and Imam, A.A. and Thangiah, M. and Gilal, A.R. and Balogun, A.O. (2020) The organisational factors of software process improvement in small software industry: Comparative study. Advances in Intelligent Systems and Computing, 1073. pp. 1132-1143.

Bhattacharjee, S. and Midhun Chakkaravarthy, D. and Chakkaravarthy, Midhun and Rahim, L.B.A. (2020) An Integrated Technique to Ensure Confidentiality and Integrity in Data Transmission Through the Strongest and Authentic Hotspot Selection Mechanism. Advances in Intelligent Systems and Computing, 1016. pp. 459-474.

Bhattacharjee, S. and Rahim, L.B.A. and Ramadhani, A.W. and Midhunchakkravarthy and Midhunchakkravarthy, D. (2020) A Study on Seismic Big Data Handling at Seismic Exploration Industry. Lecture Notes in Networks and Systems, 118. pp. 421-429.

Bingi, K. and Ibrahim, R. and Karsiti, M.N. and Hassan, S.M. and Harindran, V.R. (2020) Fractional-order set-point weighted controllers. Studies in Systems, Decision and Control, 264. pp. 9-100.

Bingi, K. and Ibrahim, R. and Karsiti, M.N. and Hassan, S.M. and Harindran, V.R. (2020) Scilab based toolbox for fractional-order chaotic systems. Studies in Systems, Decision and Control, 264. pp. 213-245.

Bingi, K. and Ibrahim, R. and Karsiti, M.N. and Hassan, S.M. and Harindran, V.R. (2020) Scilab based toolbox for fractional-order systems and PID controllers. Studies in Systems, Decision and Control, 264. pp. 137-212.

Bingi, K. and Ibrahim, R. and Karsiti, M.N. and Hassan, S.M. and Harindran, V.R. (2020) Approximation techniques. Studies in Systems, Decision and Control, 264. pp. 101-134.

Bavoh, C.B. and Lal, B. and Keong, L.K. (2020) Introduction to Gas Hydrates. Green Energy and Technology. pp. 1-25.

Barambu, N.U. and Bilad, M.R. and Bustam, M.A. and Huda, N. and Jaafar, J. and Narkkun, T. and Faungnawakij, K. (2020) Development of polysulfone membrane via vapor-induced phase separation for oil/water emulsion filtration. Polymers, 12 (11). pp. 1-16.

Banerjee, A. and Ahmed Salim, A.M. (2020) Seismic attribute analysis of deep-water Dangerous Grounds in the South China Sea, NW Sabah Platform region, Malaysia. Journal of Natural Gas Science and Engineering, 83.

Borhan, A. and Yusuf, S. (2020) Activation of rubber-seed shell waste by malic acid as potential CO2 removal: Isotherm and kinetics studies. Materials, 13 (21). pp. 1-20.

Baioumy, H. and Ting, C.J. and Farouk, S. and Al-Kahtany, K. (2020) Facies architecture of fluviatile deposits of the jurassic-cretaceous bertangga formation, peninsular malaysia. Neues Jahrbuch fur Geologie und Palaontologie - Abhandlungen, 298 (2). pp. 177-195.

Babasafari, A.A. and Ghosh, D.P. and Ahmed Salim, A.M. and Kordi, M. (2020) Lithology-dependent seismic anisotropic amplitude variation with offset correction in transversely isotropic media. Geophysical Prospecting, 68 (8). pp. 2471-2493.

Barambu, N.U. and Peter, D. and Yusoff, M.H.M. and Bilad, M.R. and Shamsuddin, N. and Marbelia, L. and Nordin, N.A.H. and Jaafar, J. (2020) Detergent and water recovery from laundry wastewater using tilted panel membrane filtration system. Membranes, 10 (10). pp. 1-9.

Bhaskar Reddy, A.V. and Moniruzzaman, M. and Bustam, M.A. and Goto, M. and Saha, B.B. and Janiak, C. (2020) Ionic liquid polymer materials with tunable nanopores controlled by surfactant aggregates: A novel approach for CO2capture. Journal of Materials Chemistry A, 8 (30). pp. 15034-15041.

Beddu, S. and Abd Manan, T.S.B. and Zainoodin, M.M. and Khan, T. and Wan Mohtar, W.H.M. and Nurika, O. and Jusoh, H. and Yavari, S. and Kamal, N.L.M. and Ghanim, A.A. and Pati, S. and Abdullah, M.T. (2020) Dataset on leaching properties of coal ashes from Malaysian coal power plant. Data in Brief, 31.

Baashar, Y. and Alhussian, H. and Patel, A. and Alkawsi, G. and Alzahrani, A.I. and Alfarraj, O. and Hayder, G. (2020) Customer relationship management systems (CRMS) in the healthcare environment: A systematic literature review. Computer Standards and Interfaces, 71.

Babasafari, A.A. and Ghosh, D.P. and Salim, A.M.A. and Kordi, M. (2020) Integrating petroelastic modeling, stochastic seismic inversion, and Bayesian probability classification to reduce uncertainty of hydrocarbon prediction: Example from Malay Basin. Interpretation, 8 (3). SM65-SM82.

Babasafari, A.A. and Bashir, Y. and Ghosh, D.P. and Salim, A.M.A. and Janjuhah, H.T. and Kazemeini, S.H. and Kordi, M. (2020) A new approach to petroelastic modeling of carbonate rocks using an extended pore-space stiffness method, with application to a carbonate reservoir in Central Luconia, Sarawak, Malaysia. Leading Edge, 39 (8). 592a1-592a10.

Bhaskar Reddy, A.V. and Moniruzzaman, M. and Madhavi, G. and Aminabhavi, T.M. (2020) Modern approaches in separation, identification and quantification of polychlorinated biphenyls. Current Opinion in Environmental Science and Health, 18. pp. 26-39.

Belhaj, A.F. and Elraies, K.A. and Mahmood, S.M. and Zulkifli, N.N. and Akbari, S. and Hussien, O.S.E. (2020) The effect of surfactant concentration, salinity, temperature, and pH on surfactant adsorption for chemical enhanced oil recovery: a review. Journal of Petroleum Exploration and Production Technology, 10 (1). pp. 125-137.

Borhan, N. and Salleh, I.K. and Numin, M.S. (2020) Effect of biobased lipid surfactant on the rheology and morphology properties in alkalineâ��surfactantâ��polymer and crude oil system. Offshore Technology Conference Asia 2020, OTCA 2020.

C

Chew, Thiam Leng and Ding, Sie Hao and Oh, Pei Ching and Ahmad, Abdul Latif and Ho, Chii-Dong (2020) Functionalized KIT-6/polysulfone mixed matrix membranes for enhanced CO2/CH4 gas separation. Polymers, 12 (10). p. 2312.

Chan, Y.L. and Ung, W.C. and Lim, L.G. and Lu, C.-K. and Kiguchi, M. and Tang, T.B. (2020) Automated Thresholding Method for fNIRS-Based Functional Connectivity Analysis: Validation with a Case Study on Alzheimer's Disease. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 28 (8). pp. 1691-1701.

Chong, T.Y. and Cheah, S.A. and Ong, C.T. and Wong, L.Y. and Goh, C.R. and Tan, I.S. and Foo, H.C.Y. and Lam, M.K. and Lim, S. (2020) Techno-economic evaluation of third-generation bioethanol production utilizing the macroalgae waste: A case study in Malaysia. Energy, 210.

Chitturi, V. and Pedapati, S.R. and Awang, M. (2020) Challenges in dissimilar friction stir welding of aluminum 5052 and 304 stainless steel alloys Herausforderungen beim artfremden ReibrÃ¼hrschweiÃ�en von Aluminiumlegierungen 5052 und 304 rostfreiem Stahl. Materialwissenschaft und Werkstofftechnik, 51 (6). pp. 811-816.

Chong, Chi Cheng and Aqsha, Aqsha and Ayoub, Muhammad and Sajid, Muhammad and Abdullah, Ahmad Zuhairi and Yusup, Suzana and Abdullah, Bawadi (2020) A review over the role of catalysts for selective short-chain polyglycerol production from biodiesel derived waste glycerol. Environmental Technology & Innovation, 19. p. 100859.

Chong, Chi Cheng and Cheng, Yoke Wang and Setiabudi, HD and Ainirazali, N and Vo, Dai-Viet N and Abdullah, B (2020) Dry reforming of methane over Ni/dendritic fibrous SBA-15 (Ni/DFSBA-15): Optimization, mechanism, and regeneration studies. International Journal of Hydrogen Energy, 45 (15). pp. 8507-8525.

Chui, K.T. and Lytras, M.D. and Vasant, P. (2020) Combined generative adversarial network and fuzzy C-means clustering for multi-class voice disorder detection with an imbalanced dataset. Applied Sciences (Switzerland), 10 (13).

Caffiyar, M.Y. and Lim, K.P. and Kamal Basha, I.H. and Hamid, N.H. and Cheong, S.C. and Wei Ho, E.T. (2020) Label-free, high-throughput assay of human dendritic cells from whole-blood samples with microfluidic inertial separation suitable for resource-limited manufacturing. Micromachines, 11 (5).

Cheng, Y.W. and Chong, C.C. and Cheng, C.K. and Ng, K.H. and Witoon, T. and Juan, J.C. (2020) Ethylene production from ethanol dehydration over mesoporous SBA-15 catalyst derived from palm oil clinker waste. Journal of Cleaner Production, 249.

Chia, W.Y. and Khoo, K.S. and Chia, S.R. and Chew, K.W. and Yew, G.Y. and Ho, Y.-C. and Show, P.L. and Chen, W.-H. (2020) Factors affecting the performance of membrane osmotic processes for bioenergy development. Energies, 13 (2).

Chawla, M. and Saulat, H. and Masood Khan, M. and Mahmood Khan, M. and Rafiq, S. and Cheng, L. and Iqbal, T. and Rasheed, M.I. and Farooq, M.Z. and Saeed, M. and Ahmad, N.M. and Khan Niazi, M.B. and Saqib, S. and Jamil, F. and Mukhtar, A. and Muhammad, N. (2020) Membranes for CO2 /CH4 and CO2/N2 Gas Separation. Chemical Engineering and Technology, 43 (2). pp. 184-199.

Chan, Y.H. and Loh, S.K. and Chin, B.L.F. and Yiin, C.L. and How, B.S. and Cheah, K.W. and Wong, M.K. and Loy, A.C.M. and Gwee, Y.L. and Lo, S.L.Y. and Yusup, S. and Lam, S.S. (2020) Fractionation and extraction of bio-oil for production of greener fuel and value-added chemicals: Recent advances and future prospects. Chemical Engineering Journal, 397.

Chen, L. and Ho, C.-D. and Jen, L.-Y. and Lim, J.-W. and Chen, Y.-H. (2020) Augmenting co2 absorption flux through a gasâ��liquid membrane module by inserting carbon-fiber spacers. Membranes, 10 (11). pp. 1-21.

Chitturi, V. and Pedapati, S.R. and Awang, M. (2020) Investigation of weld zone and fracture surface of friction stir lap welded 5052 aluminum alloy and 304 stainless steel joints. Coatings, 10 (11). pp. 1-15.

Chua, S.-C. and Show, P.L. and Chong, F.-K. and Ho, Y.-C. (2020) Lentil waste as novel natural coagulant for agricultural wastewater treatment. Water Science and Technology, 82 (9). pp. 1833-1847.

Chala, G.T. and Sulaiman, S.A. and Japper-Jaafar, A. and Abdullah, W.A.K.W. (2020) Temporal variation of voids in waxy crude oil gel in the presence of temperature gradient. Chemical Engineering Communications, 207 (10). pp. 1403-1414.

Chew, T.L. and Ding, S.H. and Oh, P.C. and Ahmad, A.L. and Ho, C.-D. (2020) Functionalized KIT-6/polysulfone mixed matrix membranes for enhanced CO2 /CH4 gas separation. Polymers, 12 (10). pp. 1-11.

Cheah, K.W. and Taylor, M.J. and Osatiashtiani, A. and Beaumont, S.K. and Nowakowski, D.J. and Yusup, S. and Bridgwater, A.V. and Kyriakou, G. (2020) Monometallic and bimetallic catalysts based on Pd, Cu and Ni for hydrogen transfer deoxygenation of a prototypical fatty acid to diesel range hydrocarbons. Catalysis Today, 355. pp. 882-892.

Cheah, K.W. and Yusup, S. and Taylor, M.J. and How, B.S. and Osatiashtiani, A. and Nowakowski, D.J. and Bridgwater, A.V. and Skoulou, V. and Kyriakou, G. and Uemura, Y. (2020) Kinetic modelling of hydrogen transfer deoxygenation of a prototypical fatty acid over a bimetallic Pd60Cu40catalyst: An investigation of the surface reaction mechanism and rate limiting step. Reaction Chemistry and Engineering, 5 (9). pp. 1682-1693.

Choy, S.W. and Bagarinao, E. and Watanabe, H. and Ho, E.T.W. and Maesawa, S. and Mori, D. and Hara, K. and Kawabata, K. and Yoneyama, N. and Ohdake, R. and Imai, K. and Masuda, M. and Yokoi, T. and Ogura, A. and Taoka, T. and Koyama, S. and Tanabe, H.C. and Katsuno, M. and Wakabayashi, T. and Kuzuya, M. and Hoshiyama, M. and Isoda, H. and Naganawa, S. and Ozaki, N. and Sobue, G. (2020) Changes in white matter fiber density and morphology across the adult lifespan: A cross-sectional fixel-based analysis. Human Brain Mapping, 41 (12). pp. 3198-3211.

Chong, C.C. and Aqsha, A. and Ayoub, M. and Sajid, M. and Abdullah, A.Z. and Yusup, S. and Abdullah, B. (2020) A review over the role of catalysts for selective short-chain polyglycerol production from biodiesel derived waste glycerol. Environmental Technology and Innovation, 19.

Choong, Y.J. and Yokoyama, H. and Matsumura, Y. and Lam, M.K. and Uemura, Y. and Dasan, Y.K. and Kadir, W.N.A. and Lim, J.W. (2020) The potential of using microalgae for simultaneous oil removal in wastewater and lipid production. International Journal of Environmental Science and Technology, 17 (5). pp. 2755-2766.

Chong, C.C. and Cheng, Y.W. and Setiabudi, H.D. and Ainirazali, N. and Vo, D.-V.N. and Abdullah, B. (2020) Dry reforming of methane over Ni/dendritic fibrous SBA-15 (Ni/DFSBA-15): Optimization, mechanism, and regeneration studies. International Journal of Hydrogen Energy, 45 (15). pp. 8507-8525.

Cheah, W.Y. and Show, P.L. and Yap, Y.J. and Mohd Zaid, H.F. and Lam, M.K. and Lim, J.W. and Ho, Y.-C. and Tao, Y. (2020) Enhancing microalga Chlorella sorokiniana CY-1 biomass and lipid production in palm oil mill effluent (POME) using novel-designed photobioreactor. Bioengineered, 11 (1). pp. 61-69.

Chong, Jie Sheng and Chan, Yee Ling and Ebenezer, Esther GM and Chen, Hoi Yen and Kiguchi, Masashi and Lu, Cheng-Kai and Tang, Tong Boon (2020) fNIRS-based functional connectivity estimation using semi-metric analysis to study decision making by nursing students and registered nurses. Scientific reports, 10 (1). p. 22041.

Chan, Yee Ling and Ung, Wei Chun and Lim, Lam Ghai and Lu, Cheng-Kai and Kiguchi, Masashi and Tang, Tong Boon (2020) Automated thresholding method for fNIRS-based functional connectivity analysis: Validation with a case study on Alzheimerâ��s disease. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 28 (8). pp. 1691-1701.

D

Dalha, Ibrahim B and Said, Mior A and Abdul Karim, ZA and Aziz, A Rashid A and Abidin, Ezrann Zharif Zainal and Ismael, Mhadi A (2020) Reactivity controlled compression ignition: An advanced combustion mode for improved energy efficiency. Energy Efficiency in Mobility Systems. pp. 101-126.

Draman, N.N.C. and Karim, S.A.A. and Hashim, I. (2020) Scattered Data Interpolation Using Rational Quartic Triangular Patches with Three Parameters. IEEE Access, 8. pp. 44239-44262.

Dafaallah, D.E. and Hashim, A.S. (2020) Sentiment analysis techniques to analyze hse situational awareness at oil and gas platforms using machine learning. Indian Journal of Computer Science and Engineering, 11 (5). pp. 640-645.

Devan, P.A.M. and Hussin, F.A.B. and Ibrahim, R. and Bingi, K. and Abdulrab, H.Q.A. (2020) Fractional-order predictive pi controller for dead-time processes with set-point and noise filtering. IEEE Access, 8. pp. 183759-183773.

Donghai, H.E. and Liew, M.S. and Ovinis, M. and Danyaro, K.U. (2020) Study on vibration of U-shaped flexible jumpers. Journal of Engineering Science and Technology, 15 (4). pp. 2414-2437.

Daffalla, Samah Babiker and Mukhtar, Hilmi and Shaharun, Maizatul Shima (2020) Preparation and characterization of rice husk adsorbents for phenol removal from aqueous systems. PloS one, 15 (12). e0243540.

Dzulkifli, H. and Mustapha, M. and Sallih, N. and Kakooei, S. and Mustapha, F. (2020) The effect of reaction temperature on the formation of 2H-SiC and 3C-SiC nanowhiskers. Engineering Solid Mechanics, 8 (4). pp. 381-388.

Dalha, I.B. and Said, M.A. and Abdul Karim, Z.A. and Mohammed, S.E. (2020) An experimental investigation on the influence of port injection at valve on combustion and emission characteristics of B5/biogas RCCI engine. Applied Sciences (Switzerland), 10 (2).

Dar, U.A. and Mian, H.H. and Abid, M. and Topa, A. and Sheikh, M.Z. and Bilal, M. (2020) Experimental and numerical investigation of compressive behavior of lattice structures manufactured through projection micro stereolithography. Materials Today Communications, 25.

Deraman, S.N.C. and Sabah, S.H.A. and Zaini, S.S. and Majid, T.A. and Al-Fakih, A. (2020) The effects of the presence of a kitchen house on the wind flow surrounding a low-rise building. Energies, 13 (23).

Dharmowijoyo, D.B.E. and Susilo, Y.O. and Syabri, I. (2020) Time use and spatial influence on transport-related social exclusion, and mental and social health. Travel Behaviour and Society, 21. pp. 24-36.

Dasan, Y.K. and Lam, M.K. and Yusup, S. and Lim, J.W. and Show, P.L. and Tan, I.S. and Lee, K.T. (2020) Cultivation of Chlorella vulgaris using sequential-flow bubble column photobioreactor: A stress-inducing strategy for lipid accumulation and carbon dioxide fixation. Journal of CO2 Utilization, 41.

Dano, U.L. and Balogun, A.-L. and Abubakar, I.R. and Aina, Y.A. (2020) Transformative urban governance: confronting urbanization challenges with geospatial technologies in Lagos, Nigeria. GeoJournal, 85 (4). pp. 1039-1056.

Din, I.U. and Shaharun, M.S. and Naeem, A. and Alotaibi, M.A. and Alharthi, A.I. and Bakht, M.A. and Nasir, Q. (2020) Carbon nanofibers as potential materials for catalysts support, a mini-review on recent advances and future perspective. Ceramics International, 46 (11). pp. 18446-18452.

Donghai, H.E. and Liew, M.S. and Ovinis, M. and Danyaro, K.U. (2020) Study on vibration of U-shaped flexible jumpers. Journal of Engineering Science and Technology, 15 (4). pp. 2414-2437.

E

Elgharbawy, Amal A and Alam, Md and Moniruzzaman, Muhammad and Kabbashi, Nassereldeen A and Jamal, Parveen and Motlagh, Shiva R and others (2020) Effect of Choline Acetate on the Yeast Cells During Fermentation: Kinetics Approach. Current Biochemical Engineering, 6 (3). pp. 172-179.

Elgharbawy, Amal AM and Moniruzzaman, Muhammad and Goto, Masahiro (2020) Recent advances of enzymatic reactions in ionic liquids: Part II. Biochemical Engineering Journal, 154. p. 107426.

Evelyn, Evelyn and Aziz, Abd Rashid Abd and Sambegoro, Poetro Lebdo (2020) A Review of Range Extender Technologies in Electric Vehicles. International Journal of Sustainable Transportation Technology, 3 (1). pp. 7-11.

Ebrahim, M. and Adil, S.H. and Raza, K. and Ali, S.S.A. (2020) Block compressive sensing single-view video reconstruction using joint decoding framework for low power real time applications. Applied Sciences (Switzerland), 10 (22). pp. 1-23.

Eldemerdash, T. and Abdulla, R. and Jayapal, V. and Nataraj, C. and Abbas, M.K. (2020) IoT based smart helmet for mining industry application. International Journal of Advanced Science and Technology, 29 (1). pp. 373-387.

Ern, P.A.S. and Ooi, Y.Y. and Al-Ashmori, Y.Y. (2020) Comparative study on the perspective towards the benefits and hindrances of implementing building information modelling (Bim). International Journal of Sustainable Construction Engineering and Technology, 11 (1). pp. 194-205.

Evizal, A.K. and Irie, H. and Rosa, S.L. and Othman, M. (2020) Multi-sensor system for monitoring of river water pollution. Przeglad Elektrotechniczny, 96 (4). pp. 62-66.

Ezechi, E.H. and Isa, M.H. and Muda, K. and Kutty, S.R.M. (2020) A comparative evaluation of two electrode systems on continuous electrocoagulation of boron from produced water and mass transfer resistance. Journal of Water Process Engineering, 34.

Elma, M. and Rampun, E.L.A. and Rahma, A. and Assyaifi, Z.L. and Sumardi, A. and Lestari, A.E. and Saputro, G.S. and Bilad, M.R. and Darmawan, A. (2020) Carbon templated strategies of mesoporous silica applied for water desalination: A review. Journal of Water Process Engineering, 38.

Emamian, S.S. and Awang, M. and Yusof, F. and Sheikholeslam, M. and Mehrpouya, M. (2020) Improving the friction stir welding tool life for joining the metal matrix composites. International Journal of Advanced Manufacturing Technology, 106 (7-8). pp. 3217-3227.

Elgharbawy, A.A.M. and Moniruzzaman, M. and Goto, M. (2020) Recent advances of enzymatic reactions in ionic liquids: Part II. Biochemical Engineering Journal, 154.

Eslami Afrooz, I. and Chuan Ching, D.L. (2020) Effect of novel swirl distributor plate on gasification efficiency of bubbling fluidized bed gasifier. Lecture Notes in Mechanical Engineering. pp. 97-105.

Elma, M. and Mujiyanti, D.R. and Ismail, N.M. and Bilad, M.R. and Rahma, A. and Rahman, S.K. and Fitriani and Rakhman, A. and Rampun, E.L.A. (2020) Development of hybrid and templated silicaâ��p123 membranes for brackish water desalination. Polymers, 12 (11). pp. 1-13.

Elsoragaby, S. and Yahya, A. and Mahadi, M.R. and Nawi, N.M. and Mairghany, M. and M Elhassan, S.M. and Kheiralla, A.F. (2020) Applying multi-objective genetic algorithm (MOGA) to optimize the energy inputs and greenhouse gas emissions (GHG) in wetland rice production. Energy Reports, 6. pp. 2988-2998.

Emmanuel, E. and Fogne Appiah, N. and Agyemang, P. and Abunde Neba, F. and Nyam, Y.S. and Ndip, G. and Ndam, D. (2020) Simplex Lattice Strength Optimization of Lime-micro Silica Stabilized Coir Fiber-reinforced Soil. Journal of Natural Fibers.

Ejaz, Muhammad Mudassir and Tang, Tong Boon and Lu, Cheng-Kai (2020) Vision-based autonomous navigation approach for a tracked robot using deep reinforcement learning. IEEE Sensors Journal, 21 (2). pp. 2230-2240.

F

Fetecau, C. and Narahari, M. (2020) General Solutions for Hydromagnetic Flow of Viscous Fluids between Horizontal Parallel Plates through Porous Medium. Journal of Engineering Mechanics, 146 (6).

Foong, Choi Yee and Wirzal, Mohd Dzul Hakim and Bustam, Mohamad Azmi (2020) A review on nanofibers membrane with amino-based ionic liquid for heavy metal removal. Journal of Molecular Liquids, 297. p. 111793.

Foo, Khor Siak and Bavoh, Cornelius Borecho and Lal, Bhajan and Mohd Shariff, Azmi (2020) Rheology impact of various hydrophilic-hydrophobic balance (HLB) index non-ionic surfactants on cyclopentane hydrates. Molecules, 25 (16). p. 3725.

Fauzi Rahman Jayaraman, Siti Nur Balqis and Shariff, Azmi Mohd and Zaini, Dzulkarnain (2020) Stakeholder outreach on process safety for process industry using risk based approaches. Process Safety Progress, 39. e12130.

Fong, M. and Kurnia, J. and Sasmito, A.P. (2020) Application of phase change material-based thermal capacitor in double tube heat exchangerâ��A numerical investigation. Energies, 13 (17).

Farhood, N.H. and Karuppanan, S. and Ya, H.H. and Ovinis, M. and Sultan, M.T.H. (2020) Experimental characterization of compression performance of carbonâ��basalt hybrid filament wound pipes before and after impact. Composites: Mechanics, Computations, Applications, 11 (1). pp. 25-38.

Fauzi Rahman Jayaraman, S.N.B. and Shariff, A.M. and Zaini, D. (2020) Stakeholder outreach on process safety for process industry using risk based approaches. Process Safety Progress, 39 (S1).

Fooladi, E. and Razavizadeh, B.B.M. and Noori, M. and Kakooei, S. (2020) Application of carboxylic acid-functionalized of graphene oxide for electrochemical simultaneous determination of tryptophan and tyrosine in milk. SN Applied Sciences, 2 (4).

Fauzan, Nur Aqilah Bt and Mukhtar, Hilmi and Nasir, Rizwan and Mohshim, Dzeti Farhah Bt and Arasu, Naviinthiran and Man, Zakaria and Mannan, Hafiz Abdul (2020) Composite amine mixed matrix membranes for high-pressure CO2-CH4 separation: synthesis, characterization and performance evaluation. Royal Society open science, 7 (9). p. 200795.

Farooqi, Ahmad Salam and Al-Swai, Basem M and Ruslan, Farida Hamimi and Zabidi, Noor Asmawati Mohd and Saidur, R and Muhammad, Syed Anuar Faua'ad Syed and Abdullah, Bawadi (2020) Catalytic conversion of greenhouse gases (CO2 and CH4) to syngas over Ni-based catalyst: Effects of Ce-La promoters. Arabian Journal of Chemistry, 13 (6). pp. 5740-5749.

Fikri, M.N. and Hassan, M.F. and Tran, D.C. (2020) The impact of fuzzy discretizationâ��s output on classification accuracy of random forest classifier. International Journal of Advanced Trends in Computer Science and Engineering, 9 (3). pp. 3950-3956.

Filho, W.L. and Barbir, J. and Sima, M. and Kalbus, A. and Nagy, G.J. and Paletta, A. and Villamizar, A. and Martinez, R. and Azeiteiro, U.M. and Pereira, M.J. and Mussetta, P.C. and Ivars, J.D. and Salgueirinho OsÃ³rio de Andrade Guerra, J.B. and de Silva Neiva, S. and Moncada, S. and Galdies, C. and Klavins, M. and Nikolova, M. and Gogu, R.C. and Balogun, A.-L. and Bouredji, A. and Bonoli, A. (2020) Reviewing the role of ecosystems services in the sustainability of the urban environment: A multi-country analysis. Journal of Cleaner Production, 262.

Farooq, M.U. and Saad, M.N.B.M. and Malik, A.S. and Salih Ali, Y. and Khan, S.D. (2020) Motion estimation of high density crowd using fluid dynamics. Imaging Science Journal, 68 (3). pp. 141-155.

Foong, S.Y. and Liew, R.K. and Yang, Y. and Cheng, Y.W. and Yek, P.N.Y. and Wan Mahari, W.A. and Lee, X.Y. and Han, C.S. and Vo, D.-V.N. and Van Le, Q. and Aghbashlo, M. and Tabatabaei, M. and Sonne, C. and Peng, W. and Lam, S.S. (2020) Valorization of biomass waste to engineered activated biochar by microwave pyrolysis: Progress, challenges, and future directions. Chemical Engineering Journal, 389.

Foong, O.-M. and Ismail, A.N. (2020) Document clustering using hybrid lda- kmeans. Advances in Intelligent Systems and Computing, 1226 A. pp. 137-146.

Fua-Nizan, R. and Rani, A.M.A. and Din, M.Y. and Chopra, S. (2020) Preliminary Study of Stress Distribution on Modified Femoral Component of Knee Implant at Maximum Flexion Angle. Lecture Notes in Mechanical Engineering. pp. 17-22.

Foroozesh, J. and Kumar, S. (2020) Nanoparticles behaviors in porous media: Application to enhanced oil recovery. Journal of Molecular Liquids, 316.

Fong, M. and Kurnia, J. and Sasmito, A.P. (2020) Application of phase change material-based thermal capacitor in double tube heat exchangerâ��A numerical investigation. Energies, 13 (17).

Fathanah, U. and Machdar, I. and Riza, M. and Arahman, N. and Yusuf, M. and Muchtar, S. and Bilad, M.R. and Nordin, N.A.H. (2020) Enhancement of antifouling of ultrafiltration polyethersulfone membrane with hybrid mg (oh)2/chitosan by polymer blending. Journal of Membrane Science and Research, 6 (4). pp. 375-382.

Fauzan, N.A.B. and Mukhtar, H. and Nasir, R. and Mohshim, D.F.B. and Arasu, N. and Man, Z. and Mannan, H.A. (2020) Composite amine mixed matrix membranes for high-pressure CO 2 -CH 4 separation: Synthesis, characterization and performance evaluation: Composite Amine Mixed Matrix Membranes. Royal Society Open Science, 7 (9).

Foo, K.S. and Bavoh, C.B. and Lal, B. and Shariff, A.M. (2020) Rheology Impact of Various Hydrophilic-Hydrophobic Balance (HLB) Index Non-Ionic Surfactants on Cyclopentane Hydrates. Molecules, 25 (16).

Farooqi, A.S. and Al-Swai, B.M. and Ruslan, F.H. and Mohd Zabidi, N.A. and Saidur, R. and Syed Muhammad, S.A.F. and Abdullah, B. (2020) Catalytic conversion of greenhouse gases (CO2 and CH4) to syngas over Ni-based catalyst: Effects of Ce-La promoters. Arabian Journal of Chemistry, 13 (6). pp. 5740-5749.

G

Ghosh, A. and Ahmed, S. and Khan, F. and Rusli, R. (2020) Process Safety Assessment Considering Multivariate Non-linear Dependence Among Process Variables. Process Safety and Environmental Protection, 135. pp. 70-80.

Gebremedhen, H.S. and Woldemichael, D.E. and Hashim, F.M. (2020) A firefly algorithm based hybrid method for structural topology optimization. Advanced Modeling and Simulation in Engineering Sciences, 7 (1).

Gupta, M. and Athirah, N. and Hawari, H.F. (2020) Graphene derivative coated QCM-based gas sensor for volatile organic compound (VOC) detection at room temperature. Indonesian Journal of Electrical Engineering and Computer Science, 18 (3). pp. 1279-1286.

Goh, H.-B. and Lai, S.-H. and Jameel, M. and Teh, H.-M. (2020) Potential of coastal headlands for tidal energy extraction and the resulting environmental effects along Negeri Sembilan coastlines: A numerical simulation study. Energy, 192.

Gezer, B. and Kose, U. and Zubov, D. and Deperlioglu, O. and Vasant, P. (2020) Determining optimum carob powder adsorbtion for cleaning wastewater: intelligent optimization with electro-search algorithm. Wireless Networks, 26 (8). pp. 5665-5679.

Gohari, A. and Tighnavard Balasbaneh, A. and Yusof, K.W. and Toloue, I. and Taofeeq Sholagberu, A. and Hasan, R. (2020) Comparative analysis of single- and multi-criteria container transport modes in Peninsular Malaysia. International Journal of Sustainable Engineering.

Guillal, A. and Ben Seghier, M.E.A. and Nourddine, A. and Correia, J.A.F.O. and Bt Mustaffa, Z. and Trung, N.-T. (2020) Probabilistic investigation on the reliability assessment of mid- and high-strength pipelines under corrosion and fracture conditions. Engineering Failure Analysis, 118.

Ganat, T.A.-A.O. (2020) Preface. SpringerBriefs in Applied Sciences and Technology. vii.

Ganasan, J. and Hashim, A.S. (2020) Gestural Interface to Support Car Drivers Interacting with Smartphone: A Systematic Literature Review. Advances in Intelligent Systems and Computing, 1294. pp. 769-783.

Ganat, T.A.-A.O. (2020) Estimation of reservoir rock and fluid properties. SpringerBriefs in Applied Sciences and Technology. pp. 29-34.

Ganat, T.A.-A.O. (2020) Wells and production functions. SpringerBriefs in Applied Sciences and Technology. pp. 41-46.

Ganat, T.A.-A.O. (2020) Upstream facilities and subsea production systems. SpringerBriefs in Applied Sciences and Technology. pp. 47-52.

Ganat, T.A.-A.O. (2020) Case studies evaluations. SpringerBriefs in Applied Sciences and Technology. pp. 57-90.

Ganat, T.A.-A.O. (2020) Prospective resources: plays, leads, and prospects. SpringerBriefs in Applied Sciences and Technology. pp. 13-19.

Ganat, T.A.-A.O. (2020) Hydrocarbon exploration. SpringerBriefs in Applied Sciences and Technology. pp. 1-11.

Ganat, T.A.-A.O. (2020) Technical guidance for petroleum exploration and production plans. SpringerBriefs in Applied Sciences and Technology. pp. 1-93.

Ganat, T.A.-A.O. (2020) Petroleum reservoir analogues. SpringerBriefs in Applied Sciences and Technology. pp. 35-39.

Ganat, T.A.-A.O. (2020) Capex and opex expenditures. SpringerBriefs in Applied Sciences and Technology. pp. 53-56.

Ganat, T.A.-A.O. (2020) Understanding exploration, appraisal and production stages. SpringerBriefs in Applied Sciences and Technology. pp. 21-28.

Gurdeep Singh, H.K. and Yusup, S. and Quitain, A.T. and Abdullah, B. and Ameen, M. and Sasaki, M. and Kida, T. and Cheah, K.W. (2020) Biogasoline production from linoleic acid via catalytic cracking over nickel and copper-doped ZSM-5 catalysts. Environmental Research, 186.

H

Hossain, SM Zakir and Razzak, Shaikh A and Al-Shater, Abdulla F and Moniruzzaman, Muhammad and Hossain, Mohammad M (2020) Recent advances in enzymatic conversion of microalgal lipids into biodiesel. Energy & Fuels, 34 (6). pp. 6735-6750.

Hezam Saeed, Anwar Ameen and Harun, Noorfidza Yub and Sufian, Suriati and Bin Aznan, Muhammad Firdaus (2020) Effect of adsorption parameter on the removal of nickel (II) by low-cost adsorbent extracted from corn cob. International Journal of Advanced Research in Engineering and Technology (IJARET), 11 (9).

Haruna, A. and Shafiq, N. and Ali, M.O. and Mohammed, M. and Haruna, S. (2020) Design and construction technique for low embodied energy building: An analytical network process approach. Journal of Engineering and Technological Sciences, 52 (2). pp. 166-180.

Husain, K. and Awang, A. (2020) Forwarding Angles and the Trade-Off between Reliability, Latency and Unicast Efficiency in Content-Based Beaconless Forwarding. IEEE Access, 8. pp. 225522-225538.

Henry, YYS and Aldrich, C and Zabiri, H (2020) Detection and severity identification of control valve stiction in industrial loops using integrated partially retrained CNN-PCA frameworks. Chemometrics and Intelligent Laboratory Systems, 206. p. 104143.

Hermansyah, Heri and Kumaraningrum, Anggraini R and Sommeng, Andy N and Wijanarko, Anondho and Sahlan, Muhamad and Shariff, Azmi M (2020) Semi-quantitative risk assessment on the impact of port development to wellhead platform. Process Safety Progress, 39. e12117.

Hafyan, Rendra Hakim and Bhullar, Lupete K and Mahadzir, Shuhaimi and Bilad, Muhammad Roil and Nordin, Nik Abdul Hadi and Wirzal, Mohd Dzul Hakim and Putra, Zulfan Adi and Rangaiah, Gade Pandu and Abdullah, Bawadi (2020) Integrated biorefinery of empty fruit bunch from palm oil industries to produce valuable biochemicals. Processes, 8 (7). p. 868.

Hafyan, R.H. and Bhullar, L. and Putra, Z.A. and Bilad, M.R. and Wirzal, M.D.H. and Nordin, N.A.H.M. (2020) Multi-objective Sustainability Assessment of Levulinic Acid Production from Empty Fruit Bunch. Process Integration and Optimization for Sustainability, 4 (1). pp. 37-50.

Hikmah, N. and Hawari, H.F. and Gupta, M. (2020) Design and simulation of interdigitated electrode for GrapheneSnO2 sensor on acetone gas. Indonesian Journal of Electrical Engineering and Computer Science, 19 (1). pp. 119-125.

Hashmi, M.B. and Majid, M.A.A. and Lemma, T.A. (2020) Combined effect of inlet air cooling and fouling on performance of variable geometry industrial gas turbines. Alexandria Engineering Journal, 59 (3). pp. 1811-1821.

Hermansyah, H. and Kumaraningrum, A.R. and Sommeng, A.N. and Wijanarko, A. and Sahlan, M. and Shariff, A.M. (2020) Semi-quantitative risk assessment on the impact of port development to wellhead platform. Process Safety Progress, 39 (S1).

Hamid, M.S.A. and Shafiq, N. and Kiwan, O. (2020) Establishing the correlations for eco-efficiency index of various types of structural concrete used in the malaysian housing using response surface method. Applied Sciences (Switzerland), 10 (12).

Hafez, M.G. and Akter, P. and Karim, S.A.A. (2020) Overtaking collisions of ion acoustic N-Shocks in a collisionless plasma with pair-ion and (Î±, q) distribution function for electrons. Applied Sciences (Switzerland), 10 (17).

Hossain, T.M. and Watada, J. and Aziz, I.A. and Hermana, M. (2020) Machine learning in electrofacies classification and subsurface lithology interpretation: A rough set theory approach. Applied Sciences (Switzerland), 10 (17).

Haruna, S. and Mohammed, B.S. and Wahab, M.M.A. and Liew, M.S. (2020) Effect of paste aggregate ratio and curing methods on the performance of one-part alkali-activated concrete. Construction and Building Materials, 261.

Hidayah, N.M.S. and Liu, W.-W. and Khe, C.S. and Lai, C.W. and Noriman, N.Z. (2020) Roles of linear alkyl chain alkylation on reinforcement of graphene based polypropylene nanocomposites. Materials Today Communications, 22.

Hussein, M.N. and Abdulla, R. and O'Daniel, T. and Abbas, M.K. (2020) Advanced location-based IPv6 address for the node of wireless sensor network. International Journal of Electrical and Computer Engineering, 10 (3). pp. 2474-2483.

Hamed, Y. and Ibrahim Alzahrani, A. and Shafie, A. and Mustaffa, Z. and Che Ismail, M. and Kok Eng, K. (2020) Two steps hybrid calibration algorithm of support vector regression and K-nearest neighbors. Alexandria Engineering Journal, 59 (3). pp. 1181-1190.

Haryoko, L.A.F. and Kurnia, J.C. and Sasmito, A.P. (2020) Numerical investigation of subcooled boiling heat transfer in helically-coiled tube. International Journal of Automotive and Mechanical Engineering, 17 (1). pp. 7675-7686.

Ho, C.-D. and Chen, L. and Wu, K.-Y. and Ni, C.-H. and Chew, T.L. (2020) Permeate flux enhancement with a helical wired concentric tube in air gap membrane distillation systems. Desalination and Water Treatment, 202. pp. 150-168.

Hamid-Mosaku, I.A. and Oguntade, O.F. and Ifeanyi, V.I. and Balogun, A.-L. and Jimoh, O.A. (2020) Evolving a comprehensive geomatics multi-criteria evaluation index model for optimal pipeline route selection. Structure and Infrastructure Engineering, 16 (10). pp. 1382-1396.

Hamsan, M.H. and Shukur, M.F. and Aziz, S.B. and Yusof, Y.M. and Kadir, M.F.Z. (2020) Influence of NH 4 Br as an ionic source on the structural/electrical properties of dextran-based biopolymer electrolytes and EDLC application. Bulletin of Materials Science, 43 (1).

Hajihassani, M. and Kalatehjari, R. and Marto, A. and Mohamad, H. and Khosrotash, M. (2020) 3D prediction of tunneling-induced ground movements based on a hybrid ANN and empirical methods. Engineering with Computers, 36 (1). pp. 251-269.

Hanapi, A.L.M. and Othman, M. and Sokkalingam, R. and Ramli, N. and Husin, A. and Vasant, P. (2020) A novel fuzzy linear regression slidingwindow GARCH model for time-series forecasting. Applied Sciences (Switzerland), 10 (6).

Hussain, N.A.A. and Ali, S.S.A. and Ridao, P. and Cieslak, P. and Al-Saggaf, U.M. (2020) Implementation of Nonlinear Adaptive U-Model Control Synthesis Using a Robot Operating System for an Unmanned Underwater Vehicle. IEEE Access, 8. pp. 205685-205695.

Hasan, R. and Oviedo-Trespalacios, O. and Napiah, M. (2020) An intercept study of footbridge users and non-users in Malaysia. Transportation Research Part F: Traffic Psychology and Behaviour, 73. pp. 66-79.

Haroon, M. and Sheikh, N.A. and Ayub, A. and Tariq, R. and Sher, F. and Baheta, A.T. and Imran, M. (2020) Exergetic, economic and exergo-environmental analysis of bottoming power cycles operating with CO2-based binary mixture. Energies, 13 (19).

Hashmani, M.A. and Jameel, S.M. and Rehman, M. and Inoue, A. (2020) Concept Drift Evolution In Machine Learning Approaches: A Systematic Literature Review. International Journal on Smart Sensing and Intelligent Systems, 13 (1). pp. 1-16.

Hubadillah, S.K. and Othman, M.H.D. and Tai, Z.S. and Jamalludin, M.R. and Yusuf, N.K. and Ahmad, A. and Rahman, M.A. and Jaafar, J. and Kadir, S.H.S.A. and Harun, Z. (2020) Novel hydroxyapatite-based bio-ceramic hollow fiber membrane derived from waste cow bone for textile wastewater treatment. Chemical Engineering Journal, 379.

Hanif, M. and Farooq, O. and Rafiq, U. and Anis-Ur-Rehman, M. and Ul Haq, A. (2020) Structural, dielectric and electrical properties of Gd-substituted lithium nano-ferrites prepared by the WOWS sol-gel method. Nanotechnology, 31 (25).

Hussain, N.A.A. and Ali, S.S.A. and Ovinis, M. and Arshad, M.R. and Al-Saggaf, U.M. (2020) Underactuated Coupled Nonlinear Adaptive Control Synthesis Using U-Model for Multivariable Unmanned Marine Robotics. IEEE Access, 8. pp. 1851-1865.

Hassan, M.A. and Malik, A.S. and Fofi, D. and Karasfi, B. and Meriaudeau, F. (2020) Towards health monitoring using remote heart rate measurement using digital camera: A feasibility study. Measurement: Journal of the International Measurement Confederation, 149.

Hafeez, A. and Ammar Taqvi, S.A. and Fazal, T. and Javed, F. and Khan, Z. and Amjad, U.S. and Bokhari, A. and Shehzad, N. and Rashid, N. and Rehman, S. and Rehman, F. (2020) Optimization on cleaner intensification of ozone production using Artificial Neural Network and Response Surface Methodology: Parametric and comparative study. Journal of Cleaner Production, 252.

Hayat, M.A. and Ali, H.M. and Janjua, M.M. and Pao, W. and Li, C. and Alizadeh, M. (2020) Phase change material/heat pipe and Copper foam-based heat sinks for thermal management of electronic systems. Journal of Energy Storage, 32.

Hussain, H.H. and Husin, H. (2020) Review on application of quaternary ammonium salts for gas hydrate inhibition. Applied Sciences (Switzerland), 10 (3).

Hassan, S.M. and Ibrahim, R. and Saad, N. and Bingi, K. and Asirvadam, V.S. (2020) Preface. Studies in Systems, Decision and Control, 293. vii-viii.

Hussin, F.A. and Inoue, M. and Ooi, C.Y. and Larsson, E. (2020) Foreword. Proceedings of the Asian Test Symposium, 2020-N. XIX.

Hasim, N. and Azmi, N.S. and Wan Ali, W.F.F. and Hamzah, E. and Yahya, A. and Mat Yajid, M.A. and Nosbi, N. (2020) Temperature effect on pseudomonas aeruginosa growth and its presence on corrosion of steel wire rope. Materials Science Forum, 1010 M. pp. 92-97.

Hussain, K. and Zhu, W. and Salleh, M.N.M. and Ali, H. and Talpur, N. and Naseem, R. and Ahmad, A. and Ullah, A. (2020) Enhanced Bat Algorithm for Solving Non-Convex Economic Dispatch Problem. Advances in Intelligent Systems and Computing, 978 AI. pp. 419-428.

Hashim, H. and Yusup, S. and Arlabosse, P. (2020) Prediction of Oil Yield from Oil Palm Mesocarp Using Thermally Assisted Mechanical Dewatering (TAMD). Energy, Environment, and Sustainability. pp. 65-75.

Hassan, S.M. and Ibrahim, R. and Saad, N. and Bingi, K. and Asirvadam, V.S. (2020) Hybrid ABFA-APSO Algorithm. Studies in Systems, Decision and Control, 293. pp. 121-140.

Hassan, S.M. and Ibrahim, R. and Saad, N. and Bingi, K. and Asirvadam, V.S. (2020) Introduction. Studies in Systems, Decision and Control, 293. pp. 1-24.

Hassan, S.M. and Ibrahim, R. and Saad, N. and Bingi, K. and Asirvadam, V.S. (2020) Filtered Predictive PI Controller for WirelessHART Networked Systems. Studies in Systems, Decision and Control, 293. pp. 27-58.

Hassan, S.M. and Ibrahim, R. and Saad, N. and Bingi, K. and Asirvadam, V.S. (2020) WirelessHART Networked Set-Point Weighted Controllers. Studies in Systems, Decision and Control, 293. pp. 59-91.

Hassan, S.M. and Ibrahim, R. and Saad, N. and Bingi, K. and Asirvadam, V.S. (2020) Hybrid APSOâ��Spiral Dynamic Algorithm. Studies in Systems, Decision and Control, 293. pp. 95-120.

Haneef, T. and Ul Mustafa, M.R. and Yusof, K.W. and Isa, M.H. and Bashir, M.J.K. and Ahmad, M. and Zafar, M. (2020) Removal of polycyclic aromatic hydrocarbons (PAHs) from produced water by Ferrate (VI) oxidation. Water (Switzerland), 12 (11). pp. 1-17.

Hassan, N.H. and Al Othman, H.I.A. and Malek, N.R.A. and Zulkurnain, M. and Saad, B. and Wong, Y.F. (2020) Simultaneous Quantitative Assessment of Ochratoxin A, Patulin, 5-Hydroxymethylfurfural, and Bisphenol A in Fruit Drinks Using HPLC with Diode Array-Fluorimetric Detection. Foods, 9 (11).

Hau, L.J. and Shamsuddin, R. and May, A.K.A. and Saenong, A. and Lazim, A.M. and Narasimha, M. and Low, A. (2020) Mixed Composting of Palm Oil Empty Fruit Bunch (EFB) and Palm Oil Mill Effluent (POME) with Various Organics: An Analysis on Final Macronutrient Content and Physical Properties. Waste and Biomass Valorization, 11 (10). pp. 5539-5548.

Hassan, M.A. and Mamat, O.B. and Mehdi, M. (2020) Review: Influence of alloy addition and spinel coatings on Cr-based metallic interconnects of solid oxide fuel cells. International Journal of Hydrogen Energy, 45 (46). pp. 25191-25209.

Hamid, M. and Foong, O.M. and Usman, M. and Khan, I. and Wang, W. (2020) A new operational matrices-based spectral method for multi-order fractional problems. Symmetry, 12 (9).

Haneef, T. and Ul Mustafa, M.R. and Rasool, K. and Ho, Y.C. and Mohamed Kutty, S.R. (2020) Removal of polycyclic aromatic hydrocarbons in a heterogeneous fenton like oxidation system using nanoscale zero-valent iron as a catalyst. Water (Switzerland), 12 (9).

Hassan, M.A. and Mamat, O.B. (2020) Mitigation of chromium poisoning of ferritic interconnect from annealed spinel of CuFe2O4. Processes, 8 (9).

Hamdi, S.S. and Al-Kayiem, H.H. and Muhsan, A.S. and Magaril, E. (2020) Experimental dataset on the dispersion stability of natural polymer non-covalently functionalized graphene nanoplatelets in high salinity brines. Data in Brief, 31.

Han, S.J. and Ameen, M. and Hanifah, M.F.R. and Aqsha, A. and Bilad, M.R. and Jaafar, J. and Kheawhom, S. (2020) Catalytic evaluation of nanoflower structured manganese oxide electrocatalyst for oxygen reduction in alkaline media. Catalysts, 10 (8).

Hafyan, R.H. and Bhullar, L.K. and Mahadzir, S. and Bilad, M.R. and Hadi Nordin, N.A. and Hakim Wirzal, M.D. and Putra, Z.A. and Rangaiah, G.P. and Abdullah, B. (2020) Integrated biorefinery of empty fruit bunch from palm oil industries to produce valuable biochemicals. Processes, 8 (7).

Hamza, M.F. and Soleimani, H. and Merican, Z.M.A. and Sinnathambi, C.M. and Stephen, K.D. and Ahmad, A.A. (2020) Nano-fluid viscosity screening and study of in situ foam pressure buildup at high-temperature high-pressure conditions. Journal of Petroleum Exploration and Production Technology, 10 (3). pp. 1115-1126.

Hafeez, S. and Arshad, N.I. and Rahim, L.B.A. and Ariffin, M.M. and Ariff, M.I.M. and Shabbir, M.F. (2020) The role of ICT ecosystem for sustainable innovation: Evidence from the gaming industry of China. International Journal of Innovation, Creativity and Change, 13 (5). pp. 293-306.

Hossain, Touhid Mohammad and Watada, Junzo and Jian, Zhiwen and Sakai, Hiroshi and Rahman, Shokor and Aziz, Izzatdin Abdul (2020) Missing well log data handling in complex lithology prediction: An NIS apriori algorithm approach. International journal of innovative computing, information & control: IJICIC, 16 (3). pp. 1077-1091.

Hossain, Touhid Mohammad and Watada, Junzo and Aziz, Izzatdin A and Hermana, Maman (2020) Machine learning in electrofacies classification and subsurface lithology interpretation: A rough set theory approach. Applied Sciences, 10 (17). p. 5940.

Husain, Syeda Fabeha and Yu, Rongjun and Tang, Tong-Boon and Tam, Wilson W and Tran, Bach and Quek, Travis T and Hwang, Shi-Hui and Chang, Cheryl W and Ho, Cyrus S and Ho, Roger C (2020) Validating a functional near-infrared spectroscopy diagnostic paradigm for Major Depressive Disorder. Scientific reports, 10 (1). pp. 1-9.

Husain, Syeda F and Tang, Tong-Boon and Yu, Rongjun and Tam, Wilson W and Tran, Bach and Quek, Travis T and Hwang, Shi-Hui and Chang, Cheryl W and Ho, Cyrus S and Ho, Roger C (2020) Cortical haemodynamic response measured by functional near infrared spectroscopy during a verbal fluency task in patients with major depression and borderline personality disorder. EBioMedicine, 51. p. 102586.

I

Irfan, Sayed Ameenuddin and Azeem, Babar and Irshad, Kashif and Algarni, Salem and KuShaari, KuZilati and Islam, Saiful and Abdelmohimen, Mostafa AH (2020) Machine learning model for nutrient release from biopolymers coated controlled-release fertilizer. Agriculture, 10 (11). p. 538.

Irfan, Muhammad and Ahmad, Tausif and Moniruzzaman, Muhammad and Bhattacharjee, Sekhar and Abdullah, Bawadi (2020) Size and stability modulation of ionic liquid functionalized gold nanoparticles synthesized using Elaeis guineensis (oil palm) kernel extract. Arabian Journal of Chemistry, 13 (1). pp. 75-85.

Islam, Md Rafiqul and Chowdhury, Md Raihan and Wakabayashi, Rie and Tahara, Yoshiro and Kamiya, Noriho and Moniruzzaman, Muhammad and Goto, Masahiro (2020) Choline and amino acid based biocompatible ionic liquid mediated transdermal delivery of the sparingly soluble drug acyclovir. International journal of pharmaceutics, 582. p. 119335.

Islam, Md Rafiqul and Chowdhury, Md Raihan and Wakabayashi, Rie and Kamiya, Noriho and Moniruzzaman, Muhammad and Goto, Masahiro (2020) Ionic liquid-in-oil microemulsions prepared with biocompatible choline carboxylic acids for improving the transdermal delivery of a sparingly soluble drug. Pharmaceutics, 12 (4). p. 392.

Ismail, Marhaina and Bustam, Mohamad Azmi and Yeong, Yin Fong (2020) Gallate-based metal—organic frameworks, a new family of hybrid materials and their applications: a review. Crystals, 10 (11). p. 1006.

Ismail, M and Bustam, MA and Yeong, YF (2020) Gallate-based metalâ organic frameworks, a new family of hybrid materials and their applications: A review. Crystals, 10 (11). pp. 1-16.

Idris, Alamin and Man, Zakaria and Maulud, Abdulhalim S and Bustam, Mohamad Azmi and Mannan, Hafiz Abdul and Ahmed, Iqbal (2020) Investigation on particle properties and extent of functionalization of silica nanoparticles. Applied Surface Science, 506. p. 144978.

Iqbal, Farukh and Mumtaz, Asad and Shahabuddin, Syed and Abd Mutalib, Mohamed Ibrahim and Shaharun, Maizatul Shima and Nguyen, Trinh Duy and Khan, Maksudur Rahman and Abdullah, Bawadi (2020) Photocatalytic reduction of CO2 to methanol over ZnFe2O4/TiO2 (p--n) heterojunctions under visible light irradiation. Journal of Chemical Technology & Biotechnology, 95 (8). pp. 2208-2221.

Islam, J. and Vasant, P.M. and Negash, B.M. and Laruccia, M.B. and Myint, M. and Watada, J. (2020) A holistic review on artificial intelligence techniques for well placement optimization problem. Advances in Engineering Software, 141.

Ishak, M.A.I. and Jumbri, K. and Khalil, M.A.B. and Daud, S. (2020) Molecular dynamic simulation on the stability of corporated metal organic framework and choline based ionic liquids. Journal of Computational and Theoretical Nanoscience, 17 (2-3). pp. 1547-1556.

Inayat, A. and Ang, H.H. and Raza, M. and Yousef, B.A.A. and Ghenai, C. and Ayoub, M. and Gilani, S.I.U.H. (2020) Integration and simulation of solar energy with hot flue gas system for the district cooling application. Case Studies in Thermal Engineering, 19.

Isyaku, B. and Bakar, K.A. and Zahid, M.S.M. and Yusuf, M.N. (2020) Adaptive and hybrid idleâ��hard timeout allocation and flow eviction mechanism considering traffic characteristics. Electronics (Switzerland), 9 (11). pp. 1-18.

Imtiaz, A. and Foong, O.-M. and Aamina, A. and Khan, N. and Ali, F. and Khan, I. (2020) Generalized model of blood flow in a vertical tube with suspension of gold nanomaterials: Applications in the cancer therapy. Computers, Materials and Continua, 65 (1). pp. 171-192.

Irshad, K. and Khan, A.I. and Irfan, S.A. and Alam, M.M. and Almalawi, A. and Zahir, M.H. (2020) Utilizing Artificial Neural Network for Prediction of Occupants Thermal Comfort: A Case Study of a Test Room Fitted with a Thermoelectric Air-Conditioning System. IEEE Access, 8. pp. 99709-99728.

Idris, A.M. and Rusli, R. and Burok, N.A. and Mohd Nabil, N.H. and Ab Hadi, N.S. and Abdul Karim, A.H.M. and Ramli, A.F. and Mydin, I. (2020) Human factors influencing the reliability of fire and gas detection system. Process Safety Progress, 39 (S1).

Islam, J. and Negash, B.M. and Vasant, P.M. and Hossain, N.I. and Watada, J. (2020) Quantum-based analytical techniques on the tackling of well placement optimization. Applied Sciences (Switzerland), 10 (19). pp. 1-25.

Inayat, A. and Raza, M. and Khan, Z. and Ghenai, C. and Aslam, M. and Shahbaz, M. and Ayoub, M. (2020) Flowsheet Modeling and Simulation of Biomass Steam Gasification for Hydrogen Production. Chemical Engineering and Technology, 43 (4). pp. 649-660.

Ishak, K.E.H.K. and Ayoub, M.A. (2020) The Influence of Polymers to the Oil-Water Separation in Liquid-Liquid Hydrocyclone. Springer Series in Geomechanics and Geoengineering. pp. 3727-3737.

Ismail, A. and Awang, M. and Zuhir, M.S.M. and Rahman, F.A. and Baharudin, B.A. and Puteri Zarina, M.K. and Hamid, D.A. and Rojan, M.A. and Dahalan, W.M. (2020) Friction Stir Welding on AA5083 Tee Joint in 1F Position. Lecture Notes in Mechanical Engineering. pp. 351-360.

Ishak, K.E.H.K. and Ayoub, M.A. (2020) The Influence of Polymers to the Oil-Water Separation in Liquid-Liquid Hydrocyclone. Springer Series in Geomechanics and Geoengineering. pp. 3727-3737.

Ishak, K.E.H.K. and Ayoub, M.A. (2020) The oil and water separation from surfactant produced water by using a flotation column. Springer Series in Geomechanics and Geoengineering. pp. 632-642.

Idris, M.M. and Napiah, M. and Matori, M.Y. and Ahmad, N. (2020) Fatigue and Long-Term Deformation Performance of Conventional and Rubber-Modified Bitumen. Lecture Notes in Civil Engineering, 59. pp. 79-85.

IBAD, T. and KADIR, S.J.A. and AZIZ, N.B.A. (2020) Evolving spiking neural network: A comprehensive survey of its variants and their results. Journal of Theoretical and Applied Information Technology, 98 (24). pp. 4061-4081.

Ismail, M. and Ludin, N.A. and Hamid, N.H. and Al-Alwani, M.A.M. and Muhamed, N.M. and Sepeai, S. and Ibrahim, M.A. and Teridi, M.A.M. (2020) Electrochemical properties of natural sensitizer from garcinia mangostana and archidendron pauciflorum pericarps for dye-sensitized solar cell (DSSC) application Sifat Elektrokimia pemekaan semula jadi daripada perikarpa garcinia mangostana dan archidendron pauciflorum untuk penggunaan sel suria peka pewarna (DSSC). Sains Malaysiana, 49 (12). pp. 3007-3015.

Ismail, A.A.A. and Mulyati, S. and Aprilia, S. and Yusoff, M.H.M. and Nawi, N.I.M. and Bilad, M.R. and Ismail, A.F. and Arahman, N. (2020) Filterability of polysulfone membrane in a tilted panel system for activated sludge filtration. Water (Switzerland), 12 (12).

Irfan, S.A. and Azeem, B. and Irshad, K. and Algarni, S. and Kushaari, K. and Islam, S. and Abdelmohimen, M.A.H. (2020) Machine learning model for nutrient release from biopolymers coated controlled-release fertilizer. Agriculture (Switzerland), 10 (11). pp. 1-13.

Ismail, M. and Bustam, M.A. and Yeong, Y.F. (2020) Gallate-based metalâ��organic frameworks, a new family of hybrid materials and their applications: A review. Crystals, 10 (11). pp. 1-16.

Imam, A.A. and Basri, S. and Ahmad, R. and Wahab, A.A. and GonzÃ¡lez-Aparicio, M.T. and Capretz, L.F. and Alazzawi, A.K. and Balogun, A.O. (2020) Dsp: Schema design for non-relational applications. Symmetry, 12 (11). pp. 1-33.

Ihsan Aquil, M.A. and Mohd. Ariffin, M. (2020) The Causes, Prevalence and Interventions for Dyscalculia in Malaysia. Journal of Educational and Social Research, 10 (6). pp. 279-289.

Imran, Q.S. and Siddiqui, N.A. and Latif, A.H.A. and Bashir, Y. and Ali, A.A.A.S. and Jamil, M. (2020) Integrated well data and 3d seismic inversion study for reservoir delineation and description. Bulletin of the Geological Society of Malaysia, 70. pp. 209-220.

Ishaq, M. and Gilani, M.A. and Afzal, Z.M. and Bilad, M.R. and Nizami, A.-S. and Rehan, M. and Tahir, E. and Khan, A.L. (2020) Novel Poly Deep Eutectic Solvents Based Supported Liquid Membranes for CO2 Capture. Frontiers in Energy Research, 8.

Ismail, N.I. and Naz, M.Y. and Shukrullah, S. and Sulaiman, S.A. (2020) Mechanical earth modeling and sand onset production prediction for Well X in Malay Basin. Journal of Petroleum Exploration and Production Technology, 10 (7). pp. 2753-2758.

Iqbal, S.A. and Hafez, M.G. and Abdul Karim, S.A. (2020) Bifurcation analysis with chaotic motion of oblique plane wave for describing a discrete nonlinear electrical transmission line with conformable derivative. Results in Physics, 18.

Iqbal, F. and Mumtaz, A. and Shahabuddin, S. and Abd Mutalib, M.I. and Shaharun, M.S. and Nguyen, T.D. and Khan, M.R. and Abdullah, B. (2020) Photocatalytic reduction of CO2 to methanol over ZnFe2O4/TiO2 (pâ��n) heterojunctions under visible light irradiation. Journal of Chemical Technology and Biotechnology, 95 (8). pp. 2208-2221.

Ismail, A. and Chen, H.C. and Faye, I. and Tang, T.B. (2020) Longitudinal effects of common carotid artery stenosis on ocular hemodynamics assessed using laser speckle flowgraphy in a rabbit model. Scientific Reports, 10 (1).

Ishak, K.E.H.K. and Ayoub, M.A. (2020) The oil and water separation from surfactant produced water by using a flotation column. Springer Series in Geomechanics and Geoengineering. pp. 632-642.

Ismail, Aishah and Chen, Hui Cheng and Faye, Ibrahima and Tang, Tong Boon (2020) Longitudinal effects of common carotid artery stenosis on ocular hemodynamics assessed using laser speckle flowgraphy in a rabbit model. Scientific reports, 10 (1). pp. 1-10.

J

Jamil, Asif and Ching, Oh Pei and Naqvi, Muhammad and Khan, Hafiza Aroosa Aslam and Naqvi, Salman Raza (2020) Polyetherimide-montmorillonite nano-hybrid composite membranes: CO2 permeance study via theoretical models. Processes, 8 (1). p. 118.

Jusoh, Norwahyu and Yeong, Yin Fong and Lock, Serene Sow Mun and Lai, Li Sze and Suleman, Malik Shoaib (2020) Biomethane generation from biogas upgrading by means of thin-film composite membrane comprising Linde T and fluorinated polyimide: optimization of fabrication parameters. RSC advances, 10 (6). pp. 3493-3510.

Jani, N.M. and Nasif, M.S. and Shafiq, N. and Holt, I. (2020) Experimental investigation on the effect of varying fiber mix proportion on the mechanical and thermal performances of fiber-reinforced self-compacting concrete under hydrocarbon fire condition. Applied Sciences (Switzerland), 10 (13).

Jagaba, A.H. and Kutty, S.R.M. and Khaw, S.G. and Lai, C.L. and Isa, M.H. and Baloo, L. and Lawal, I.M. and Abubakar, S. and Umaru, I. and Zango, Z.U. (2020) Derived hybrid biosorbent for zinc(II) removal from aqueous solution by continuous-flow activated sludge system. Journal of Water Process Engineering, 34.

Jatoi, M.A. and Kamel, N. and LÃ³pez, J.D. (2020) Multiple sparse priors technique with optimized patches for brain source localization. International Journal of Imaging Systems and Technology, 30 (1). pp. 154-167.

Jufar, S.R. and Le, M.D. and Hsu, C.M. (2020) Spreading characteristics of swirling double-concentric jets excited at resonance Strouhal number. Experimental Thermal and Fluid Science, 110.

Jagaba, A.H. and Kutty, S.R.M. and Hayder, G. and Latiff, A.A.A. and Aziz, N.A.A. and Umaru, I. and Ghaleb, A.A.S. and Abubakar, S. and Lawal, I.M. and Nasara, M.A. (2020) Sustainable use of natural and chemical coagulants for contaminants removal from palm oil mill effluent: A comparative analysis. Ain Shams Engineering Journal, 11 (4). pp. 951-960.

Jameel, S.M. and Hashmani, M.A. and Rehman, M. and Budiman, A. (2020) An adaptive deep learning framework for dynamic image classification in the internet of things environment. Sensors (Switzerland), 20 (20). pp. 1-25.

Jagaba, A.H. and Kutty, S.R.M. and Hayder, G. and Baloo, L. and Abubakar, S. and Ghaleb, A.A.S. and Lawal, I.M. and Noor, A. and Umaru, I. and Almahbashi, N.M.Y. (2020) Water quality hazard assessment for hand dug wells in Rafin Zurfi, Bauchi State, Nigeria. Ain Shams Engineering Journal, 11 (4). pp. 983-999.

Jameel, S.M. and Hashmani, M.A. and Alhussain, H. and Rehman, M. and Budiman, A. (2020) An optimized deep convolutional neural network architecture for concept drifted image classification. Advances in Intelligent Systems and Computing, 1037. pp. 932-942.

Junejo, A.Z. and Memon, M.M. and Junejo, M.A. and Talpur, S. and Memon, R.M. (2020) Blockchains Technology Analysis: Applications, Current Trends and Future Directionsâ��An Overview. Lecture Notes in Networks and Systems, 118. pp. 411-419.

Jubeen, F. and Sher, F. and Hazafa, A. and Zafar, F. and Ameen, M. and Rasheed, T. (2020) Evaluation and detoxification of aflatoxins in ground and tree nuts using food grade organic acids. Biocatalysis and Agricultural Biotechnology, 29.

Jian, B.T.P. and Mustafa, M.R.U. and Isa, M.H. and Yaqub, A. and Chia, H.Y. (2020) Study of the water quality index and polycyclic aromatic hydrocarbon for a river receiving treated landfill leachate. Water (Switzerland), 12 (10). pp. 1-29.

Janjuhah, H.T. and Alansari, A. (2020) Offshore Carbonate Facies Characterization and Reservoir Quality of Miocene Rocks in the Southern Margin of South China Sea. Acta Geologica Sinica, 94 (5). pp. 1547-1561.

Junaid, M. and Khir, M.H.M. and Witjaksono, G. and Ullah, Z. and Tansu, N. and Mohamed Saheed, M.S. and Kumar, P. and Hing Wah, L. and Magsi, S.A. and Siddiqui, M.A. (2020) A review on graphene-based light emitting functional devices. Molecules, 25 (18).

Jaradat, A. and Alhussian, H. and Patel, A. and Fati, S.M. (2020) Multiple users replica selection in data grids for fair user satisfaction: A hybrid approach. Computer Standards and Interfaces, 71.

Junaid, M. and Khir, M.H.M. and Witjaksono, G. and Tansu, N. and Saheed, M.S.M. and Kumar, P. and Ullah, Z. and Yar, A. and Usman, F. (2020) Boron-doped reduced graphene oxide with tunable bandgap and enhanced surface plasmon resonance. Molecules, 25 (16).

K

Khoiruddin, A.A. and Zakaria, N. and Alhussian, H. (2020) Asynchronous Non-Blocking Algorithm to Handle Straggler Reduce Tasks in Hadoop System. International Journal on Advanced Science, Engineering and Information Technology, 10 (5). pp. 1913-1919.

Khan, Huma Warsi and Moniruzzaman, Muhammad and Nasef, Mohamed Mahmoud Elsayed and Bustam, Mohamad Azmi and others (2020) Ionic liquid assisted cellulose aerogels for cleaning an oil spill. Materials Today: Proceedings, 31. pp. 217-220.

Kamal, Khaliesah and Bustam, Mohamad Azmi and Ismail, Marhaina and Grekov, Denys and Mohd Shariff, Azmi and Pré, Pascaline (2020) Optimization of washing processes in solvothermal synthesis of nickel-based MOF-74. Materials, 13 (12). p. 2741.

Khan, Huma Warsi and Reddy, Ambavaram Vijaya Bhaskar and Nasef, Mohamed Mahmoud Elsayed and Bustam, Mohamad Azmi and Goto, Masahiro and Moniruzzaman, Muhammad (2020) Screening of ionic liquids for the extraction of biologically active compounds using emulsion liquid membrane: COSMO-RS prediction and experiments. Journal of Molecular Liquids, 309. p. 113122.

Kamaruddin, B and Zabiri, H and Amiruddin, AAA Mohd and Teh, WK and Ramasamy, M and Jeremiah, SS (2020) A simple model-free butterfly shape-based detection (BSD) method integrated with deep learning CNN for valve stiction detection and quantification. Journal of Process Control, 87. pp. 1-16.

Kamal, Khaliesah and Bustam, Mohamad Azmi and Shariff, Azmi Mohd and Pre, Pascaline and Hamon, Lomig (2020) Structural Characterization of Magnesium-based Metal-organic Framework Carbon Composites. International Journal of Psychosocial Rehabilitation, 24 (2).

Kamaruddin, B. and Zabiri, H. and Mohd Amiruddin, A.A.A. and Teh, W.K. and Ramasamy, M. and Jeremiah, S.S. (2020) A simple model-free butterfly shape-based detection (BSD) method integrated with deep learning CNN for valve stiction detection and quantification. Journal of Process Control, 87. pp. 1-16.

Kaur, H. (2020) Interfacial rheological behavior for waxy crude oil (Water-in-oil) emulsion: Correlation between surface tension of individual liquids and interfacial tension of a readily-mixedemulsion. International Journal of Advanced Science and Technology, 29 (3). pp. 2465-2478.

Kurnia, J.C. and Ghoreishi-Madiseh, S.A. and Sasmito, A.P. (2020) Heat Transfer and Entropy Generation in Concentric/Eccentric Double-Pipe Helical Heat Exchangers. Heat Transfer Engineering, 41 (18). pp. 1552-1575.

Ku Ishak, K.E.H. and Abdalla Ayoub, M. (2020) Performance of liquidâ��liquid hydrocyclone (LLHC) for treating produced water from surfactant flooding produced water. World Journal of Engineering, 17 (2). pp. 215-222.

Khor, C.S. and Akinbola, G. and Shah, N. (2020) A model-based optimization study on greywater reuse as an alternative urban water resource. Sustainable Production and Consumption, 22. pp. 186-194.

Kumar, A. and Ridha, S. and Ganet, T. and Vasant, P. and Ilyas, S.U. (2020) Machine learning methods for herschel-bulkley fluids in annulus: Pressure drop predictions and algorithm performance evaluation. Applied Sciences (Switzerland), 10 (7).

Khan, Muhammad Saad and Bavoh, Cornelius Borecho and Rahman, Mohammad Azizur and Lal, Bhajan and Quainoo, Ato Kwamena and Shah Maulud, Abdulhalim (2020) Assessing the alkyl chain effect of ammonium hydroxides ionic liquids on the kinetics of pure methane and carbon dioxide hydrates. Energies, 13 (12). p. 3272.

Khan, M.S. and Bavoh, C.B. and Rahman, M.A. and Lal, B. and Quainoo, A.K. and Maulud, A.S. (2020) Assessing the alkyl chain effect of ammonium hydroxides ionic liquids on the kinetics of pure methane and carbon dioxide hydrates. Energies, 13 (12).

Kurnia, J.C. and Chaedir, B.A. and Sasmito, A.P. (2020) Laminar convective heat transfer in helical tube with twisted tape insert. International Journal of Heat and Mass Transfer, 150.

Khan, Z. and Yahya, N. and Alsaih, K. and Ali, S.S.A. and Meriaudeau, F. (2020) Evaluation of deep neural networks for semantic segmentation of prostate in T2W MRI. Sensors (Switzerland), 20 (11). pp. 1-17.

Kim, D.K. and Lim, H.L. and Cho, N.-K. (2020) An advanced technique to predict time-dependent corrosion damage of onshore, offshore, nearshore and ship structures: Part II = Application to the ship's ballast tank. International Journal of Naval Architecture and Ocean Engineering, 12. pp. 645-656.

Khan, M.I. and Sutanto, M.H. and Napiah, M.B. and Zoorob, S.E. and Yusoff, N.I.M. and Usman, A. and Memon, A.M. (2020) Irradiated polyethylene terephthalate and fly ash based grouts for semi-flexible pavement: design and optimisation using response surface methodology. International Journal of Pavement Engineering.

Karim, S.A.A. (2020) Rational Bi-Quartic Spline with Six Parameters for Surface Interpolation with Application in Image Enlargement. IEEE Access, 8. pp. 115621-115633.

Kim, D.K. and Wong, E.W.C. and Cho, N.-K. (2020) An advanced technique to predict time-dependent corrosion damage of onshore, offshore, nearshore and ship structures: Part I = generalisation. International Journal of Naval Architecture and Ocean Engineering, 12. pp. 657-666.

Kose, U. and Vasant, P. (2020) Better campus life for visually impaired University students: intelligent social walking system with beacon and assistive technologies. Wireless Networks, 26 (7). pp. 4789-4803.

Khan, S.U. and Ayub, T. and Shafiq, N. (2020) Physical and Mechanical Properties of Concrete with Locally Produced Metakaolin and Micro-silica as Supplementary Cementitious Material. Iranian Journal of Science and Technology - Transactions of Civil Engineering, 44 (4). pp. 1199-1207.

Kuo, J.-T. and Ng, C.L. (2020) Explicit Solution to Exact Synthesis of Cross-Coupled Quadruplet Filter with a Real-Frequency Zero Pair. IEEE Microwave and Wireless Components Letters, 30 (2). pp. 141-143.

Kurnia, J.C. and Sasmito, A.P. (2020) Performance Evaluation of Liquid Mixing in a T-Junction Passive Micromixer with a Twisted Tape Insert. Industrial and Engineering Chemistry Research, 59 (9). pp. 3904-3915.

Krishnamurthy, S. and Kannan, R. and Mohamad, F.F.A. and Ahmad, M.S. and Abdullah, Y. (2020) Total-dose effects on power mosfet in sepic converter for nanosatel-lite applications. Recent Advances in Electrical and Electronic Engineering, 13 (5). pp. 758-765.

Kim, D.K. and Yu, S.Y. and Lim, H.L. and Cho, N.-K. (2020) Ultimate compressive strength of stiffened panel: An empirical formulation for flat-bar type. Journal of Marine Science and Engineering, 8 (8).

Kim, S.W. and Lee, S.J. and Kim, Y.T. and Kim, D.K. (2020) Investigation of the refined safety factor for berthing energy calculation. Structural Engineering and Mechanics, 75 (6). pp. 785-797.

Khan, M.Y. and Ali, M. and Qaisar, S. and Naeem, M. and Chrysostomou, C. and Iqbal, M. (2020) Placement Optimization for Renewable Energy Sources: Ontology, Tools, and Wake Models. IEEE Access, 8. pp. 72781-72800.

Kineber, A.F. and Othman, I. and Oke, A.E. and Chileshe, N. and Alsolami, B. (2020) Critical value management activities in building projects: A case of Egypt. Buildings, 10 (12). pp. 1-21.

Khan, J.A. and Irfan, M. and Irawan, S. and Yao, F.K. and Shokor Abdul Rahaman, Md. and Shahari, A.R. and Glowacz, A. and Zeb, N. (2020) Comparison of machine learning classifiers for accurate prediction of real-time stuck pipe incidents. Energies, 13 (14).

Kausar, N. and Munir, M. and Salahuddin and Baharudin, Z. and Islam, B.U. (2020) Direct product of finite anti fuzzy normal sub-rings over non-associative rings. Journal of Mathematics and Computer Science, 22 (4). pp. 399-411.

Kuziel, A.W. and Milowska, K.Z. and Chau, P.-L. and Boncel, S. and Koziol, K.K. and Yahya, N. and Payne, M.C. (2020) The True Amphipathic Nature of Graphene Flakes: A Versatile 2D Stabilizer. Advanced Materials, 32 (34).

Krishna, S. and Ridha, S. and Vasant, P. and Ilyas, S.U. and Ofei, T.N. (2020) Simplified predictive model for downhole pressure surges during tripping operations using power law drilling fluids. Journal of Energy Resources Technology, Transactions of the ASME, 142 (12).

Khantong, S. and Sharif, M.N.A. and Mahmood, A.K. (2020) An ontology for sharing and managing information in disaster response: An illustrative case study of flood evacuation. International Review of Applied Sciences and Engineering, 11 (1). pp. 22-33.

Khosropanah, P. and Ho, E.T.-W. and Lim, K.-S. and Fong, S.-L. and Thuy Le, M.-A. and Narayanan, V. (2020) EEG Source Imaging (ESI) utility in clinical practice. Biomedizinische Technik, 65 (6). pp. 673-682.

Kumar, G. and Basri, S. and Imam, A.A. and Balogun, A.O. (2020) Data Harmonization for Heterogeneous Datasets in Big Data - A Conceptual Model. Advances in Intelligent Systems and Computing, 1294. pp. 723-734.

Khosravi, V. and Mahmood, S.M. and Zivar, D. (2020) Application of molecular dynamics simulation: A case study to estimate wettability. Lecture Notes in Mechanical Engineering. pp. 445-455.

Khan, R. and Ya, H.H. and Pao, W. and Khan, A. and Zahoor, R. and Ahmed, T. (2020) Influence of elbow orientation on solid particle erosion for multiphase flow. Lecture Notes in Mechanical Engineering. pp. 695-701.

Kok, H.Y. and Shamsuddin, M.R. and Aqsha, A. (2020) Anaerobic treatment of chicken manure co-digested with sawdust. Lecture Notes in Mechanical Engineering. pp. 741-748.

Khan, R. and Ya, H.H. and Pao, W. and Rao, T.V.V.L.N. and Alam, A. and Azeem, M. (2020) Investigation of maximum erosion zone in the horizontal 90Â° elbow. Lecture Notes in Mechanical Engineering. pp. 223-230.

Kok, H.Y. and Shamsuddin, M.R. and Aqsha, A. (2020) Anaerobic treatment of chicken manure co-digested with sawdust. Lecture Notes in Mechanical Engineering. pp. 741-748.

Krishnan, S. and Krishna, A. and Nordin, A. and Amirtham, V. and Rani, A.M.A. and Rao, T.V.V.L.N. (2020) Design and Fabrication of a Parallel Mechanism for Foot/Ankle Rehabilitation Therapy. Lecture Notes in Mechanical Engineering. pp. 133-141.

Khan, M.R. and Ya, H.H. and Pao, W. and Majid, M.A.A. (2020) Numerical Investigation of Sand Particle Erosion in Long Radius Elbow for Multiphase Flow. Lecture Notes in Mechanical Engineering. pp. 41-49.

Kovalev, A. and Kovalev, D. and Panchenko, V. and Kharchenko, V. and Vasant, P. (2020) System of Optimization of the Combustion Process of Biogas for the Biogas Plant Heat Supply. Advances in Intelligent Systems and Computing, 1072. pp. 361-368.

Kovalev, A. and Kovalev, D. and Panchenko, V. and Kharchenko, V. and Vasant, P. (2020) Optimization of the Process of Anaerobic Bioconversion of Liquid Organic Wastes. Advances in Intelligent Systems and Computing, 1072. pp. 170-176.

Kanapathy, S. and Lee, K.E. and Mokhtar, M. and Sivapalan, S. and Zakaria, S.Z.S. and Zahidi, A.M. (2020) Enculturing sustainable development concept through chemistry curriculum for education for sustainable development. Advances in Science, Technology and Innovation. pp. 71-92.

Krishna, S. and Ridha, S. and Vasant, P. (2020) Prediction of Bottom-Hole Pressure Differential During Tripping Operations Using Artificial Neural Networks (ANN). Lecture Notes in Networks and Systems, 118. pp. 379-388.

Khan, M.S. and Lal, B. and Bustam, M.A. (2020) Gas Hydrate Inhibitors. Green Energy and Technology. pp. 27-46.

Krishna, S. and Ridha, S. and Vasant, P. and Ilyas, S.U. and Sophian, A. (2020) Conventional and intelligent models for detection and prediction of fluid loss events during drilling operations: A comprehensive review. Journal of Petroleum Science and Engineering, 195.

Kabir, S. and Ahmad, F. and Malik, K. and Nosbi, N. and Gui Llaumat, L. (2020) Effect of heat resistant coating on the drilled hole quality of hybrid fiber reinforced epoxy composite. Evergreen, 7 (4). pp. 530-537.

Kineber, A.F. and Othman, I. and Oke, A.E. and Chileshe, N. and Buniya, M.K. (2020) Identifying and assessing sustainable value management implementation activities in developing countries: The case of Egypt. Sustainability (Switzerland), 12 (21). pp. 1-20.

Khan, R. and Ya, H.H. and Pao, W. and Majid, M.A.A. and Ahmed, T. and Ahmad, A. and Alam, M.A. and Azeem, M. and Iftikhar, H. (2020) Effect of sand fines concentration on the erosion-corrosion mechanism of carbon steel 90â�¦ elbow pipe in slug flow. Materials, 13 (20). pp. 1-16.

Khalid, H.U. and Ismail, M.C. and Nosbi, N. (2020) Permeation damage of polymer liner in oil and gas pipelines: A review. Polymers, 12 (10). pp. 1-31.

Khosravi, V. and Mahmood, S.M. and Zivar, D. and Sharifigaliuk, H. (2020) Investigating the applicability of molecular dynamics simulation for estimating the wettability of sandstone hydrocarbon formations. ACS Omega, 5 (36). pp. 22852-22860.

Khoo, C.G. and Lam, M.K. and Mohamed, A.R. and Lee, K.T. (2020) Hydrochar production from high-ash low-lipid microalgal biomass via hydrothermal carbonization: Effects of operational parameters and products characterization. Environmental Research, 188.

Kumar, S. and Foroozesh, J. and Edlmann, K. and Rezk, M.G. and Lim, C.Y. (2020) A comprehensive review of value-added CO2 sequestration in subsurface saline aquifers. Journal of Natural Gas Science and Engineering, 81.

Khitab, U. and Umar, M. and Jamil, M. (2020) Microfacies, diagenesis and hydrocarbon potential of Eocene carbonate strata in Pakistan. Carbonates and Evaporites, 35 (3).

Kurnia, K.A. and Matheswaran, P. and How, C.J. and Noh, M.H. and Kusumawati, Y. (2020) Solubility of Methane in Alkylpyridinium-Based Ionic Liquids at Temperatures between 298.15 and 343.15 K and Pressures up to 4 MPa. Journal of Chemical and Engineering Data, 65 (9). pp. 4642-4648.

Kasim, A.R.M. and Arifin, N.S. and Zokri, S.M. and Salleh, M.Z. and Mohammad, N.F. and Ching, D.L.C. and Shafie, S. and Ariffin, N.A.N. (2020) Convective transport of fluidâ��solid interaction: A study between non-newtonian casson model with dust particles. Crystals, 10 (9). pp. 1-18.

Khairuddin, S.H. and Hasan, M.H. and Hashmani, M.A. (2020) Integration of cluster centers and gaussian distributions in fuzzy c-means for the construction of trapezoidal membership function. Mathematics and Statistics, 8 (5). pp. 559-565.

Khan, I. and Fatma, M. and Shamim, A. and Joshi, Y. and Rahman, Z. (2020) Gender, loyalty card membership, age, and critical incident recovery: Do they moderate experience-loyalty relationship? International Journal of Hospitality Management, 89.

Khan, Z. and Shabbir, J. and Gupta, S. and Shamim, A. (2020) An optimal systematic sampling scheme. Journal of Statistical Computation and Simulation, 90 (11). pp. 2023-2036.

Khan, T. and Manan, T.S.B. and Isa, M.H. and Ghanim, A.A.J. and Beddu, S. and Jusoh, H. and Iqbal, M.S. and Ayele, G.T. and Jami, M.S. (2020) Modeling of Cu(II) adsorption from an aqueous solution using an Artificial Neural Network (ANN). Molecules, 25 (14).

Khan, D. and Jung, L.T. and Ahmed Hashmani, M. and Waqas, A. (2020) A Critical Review of Blockchain Consensus Model. 2020 3rd International Conference on Computing, Mathematics and Engineering Technologies: Idea to Innovation for Building the Knowledge Economy, iCoMET 2020.

Khalid, K. and Tan, X. and Mohd Zaid, H.F. and Tao, Y. and Lye Chew, C. and Chu, D.-T. and Lam, M.K. and Ho, Y.-C. and Lim, J.W. and Chin Wei, L. (2020) Advanced in developmental organic and inorganic nanomaterial: a review. Bioengineered, 11 (1). pp. 328-355.

L

Laziz, Afiq Mohd and KuShaari, KuZilati and Azeem, Babar and Yusup, Suzana and Chin, Jitkai and Denecke, Jens (2020) Rapid production of biodiesel in a microchannel reactor at room temperature by enhancement of mixing behaviour in methanol phase using volume of fluid model. Chemical Engineering Science, 219. p. 115532.

Lu, Inn-Leon and Wong, Voon-Loong and Chin, Jit-Kai and Kushaari, Kuzilati (2020) Water droplets translocation and fission in a 3D bi-planar multifurcated T-junction microchannels. Processes, 8 (5). p. 510.

Lock, Serene Sow Mun and Lau, Kok Keong and Jusoh, Norwahyu and Shariff, Azmi Mohd and Gan, Chin Heng and Yiin, Chung Loong (2020) An atomistic simulation towards molecular design of silica polymorphs nanoparticles in polysulfone based mixed matrix membranes for CO2/CH4 gas separation. Polymer Engineering & Science, 60 (12). pp. 3197-3215.

Lal, Bhajan and Nashed, Omar and Bavoh, Cornelius Borecho and Lal, Bhajan and Keong, Lau Kok (2020) Introduction to gas hydrates. Chemical Additives for Gas Hydrates. pp. 1-25.

Lal, Bhajan and Nashed, Omar and Nashed, Omar and Lal, Bhajan and Shariff, Azmi Mohd and Sabil, Khalik M (2020) Gas hydrate promoters. Chemical Additives for Gas Hydrates. pp. 47-65.

Looi, K.K. and Baheta, A.T. and Habib, K. (2020) Investigation of photovoltaic thermoelectric air-conditioning system for room application under tropical climate. Journal of Mechanical Science and Technology, 34 (5). pp. 2199-2205.

Lim, Y.P. and Cheab, S. and Soeung, S. and Wong, P.W. (2020) On the design and fabrication of chained-function waveguide filters with reduced fabrication sensitivity using CNC and DMLS. Progress In Electromagnetics Research B, 87. pp. 39-60.

Leong, Y. and Cheab, S. and Soeung, S. and Wong, P.W. (2020) A New Class of Dual-Band Waveguide Filters Based on Chebyshev Polynomials of the Second Kind. IEEE Access, 8. pp. 28571-28583.

Lekkala, M.R. and Mohamed, L. and Hafiz, M.F.U. and Kim, D.K. (2020) A practical technique for hydrodynamic coefficients modification in SHEAR7 for fatigue assessment of riser buoyancy modules under vortex-induced vibration. Ocean Engineering, 217.

Lim, Y.W. and Lee, Y.H. and Shafiai, S.H. and Liu, H. and Ho, Y.C. (2020) Particle tracking along kinta river, perak by using LABSWEâ�¢. International Journal of Emerging Trends in Engineering Research, 8 (1 1.2 ). pp. 75-82.

Lim, L.G. and Ung, W.C. and Chan, Y.L. and Lu, C.-K. and Sutoko, S. and Funane, T. and Kiguchi, M. and Tang, T.B. (2020) A unified analytical framework with multiple fNIRS features for mental workload assessment in the prefrontal cortex. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 28 (11). pp. 2367-2376.

Li, Z. and Gopinath, S.C.B. and Lakshmipriya, T. and Anbu, P. and Perumal, V. and Wang, X. (2020) Self-assembled silver nanoparticle-DNA on a dielectrode microdevice for determination of gynecologic tumors. Biomedical Microdevices, 22 (4).

Liew, M.S. and Danyaro, K.U. and Zawawi, N.A.W.A. (2020) A Comprehensive Guide to Different Fracturing Technologies: A Review. Energies, 13 (13).

Lal, B. and Nashed, O. (2020) Preface. Green Energy and Technology. v.

Laouiti, A. and Qayyum, A. and Saad, M.N.M. (2020) Preface. Advances in Intelligent Systems and Computing, 1144. ix-x.

Lynn, T.Z. and Baheta, A.T. and Akilu, S. (2020) Experimental Investigation of the Effect of Inclination Angle on Heat Pipe Thermal Performance Using Cu-Nanofluids. Lecture Notes in Mechanical Engineering. pp. 445-452.

Lemma, T.A. and Muniandy, D. and Ahsan, S. (2020) Automated Pipeline Diagnostics Using Image Processing and Intelligent System. Lecture Notes in Mechanical Engineering. pp. 133-144.

Laziz, A.M. and Shaari, K.Z.K. (2020) Effect of Flow Regime on Total Interfacial Area of Two Immiscible Fluids in Microchannel Reactor Using VOF Model. Lecture Notes in Mechanical Engineering. pp. 585-597.

Lemma, T.A. and Omar, N. and Gebremariam, M.A. and Ahsan, S. (2020) Anti-friction Bearing Malfunction Detection and Diagnostics Using Hybrid Approach. Lecture Notes in Mechanical Engineering. pp. 117-131.

Loy, A.C.M. and Yusup, S. and How, B.S. and Chan, Y.H. and Chin, B.L.F. (2020) Optimization study of syngas production from catalytic air gasification of rice husk. Journal of Green Engineering, 10 (12). pp. 13256-13275.

Liu, C. and Ghosh, D.P. and Salim, A.M.A. (2020) Advanced fluid indicator based on numerical simulation and deep learning. Journal of Applied Geophysics, 182.

Lim, C.Y. and Majid, M.F. and Rajasuriyan, S. and Zaid, H.F.M. and Jumbri, K. and Chong, F.K. (2020) Desulfurization performance of choline chloride-based deep eutectic solvents in the presence of graphene oxide. Environments - MDPI, 7 (11). pp. 1-17.

Leong, W.H. and Kiatkittipong, K. and Kiatkittipong, W. and Cheng, Y.W. and Lam, M.K. and Shamsuddin, R. and Mohamad, M. and Lim, J.W. (2020) Comparative performances of microalgal-bacterial co-cultivation to bioremediate synthetic and municipal wastewaters whilst producing biodiesel sustainably. Processes, 8 (11). pp. 1-12.

Leong, S.Y. and Kutty, S.R.M. (2020) Characteristic of Hermetia illucens Fatty Acid and that of the Fatty Acid Methyl Ester Synthesize Based on Upcycling of Perishable Waste. Waste and Biomass Valorization, 11 (10). pp. 5607-5614.

Liew, K.C.S. and Rasdi, A. and Budhijanto, W. and Yusoff, M.H.M. and Bilad, M.R. and Shamsuddin, N. and Nordin, N.A.H.M. and Putra, Z.A. (2020) Porous venturi-orifice microbubble generator for oxygen dissolution in water. Processes, 8 (10). pp. 1-15.

Lohmoh, M.-A. and Wirzal, M.D.H. and Halim, N.S.A. and Saad, M.S. and Foong, C.Y. (2020) Electrochemical stability on 1-ethyl-3-methylimidazolium bis (trifluoromethyl sulfonyl) imide ionic liquid for dye sensitized solar cell application. Journal of Molecular Liquids, 313.

Lock, S.S.M. and Lau, K.K. and Jusoh, N. and Shariff, A.M. and Yeong, Y.F. and Yiin, C.L. and Ammar Taqvi, S.A. (2020) Physical property and gas transport studies of ultrathin polysulfone membrane from 298.15 to 328.15 K and 2 to 50 bar: atomistic molecular simulation and empirical modelling. RSC Advances, 10 (54). pp. 32370-32392.

Lashari, N. and Ganat, T. (2020) Emerging applications of nanomaterials in chemical enhanced oil recovery: Progress and perspective. Chinese Journal of Chemical Engineering, 28 (8). pp. 1995-2009.

Lock, S.S.M. and Lau, K.K. and Jusoh, N. and Shariff, A.M. and Gan, C.H. and Yiin, C.L. (2020) An atomistic simulation towards molecular design of silica polymorphs nanoparticles in polysulfone based mixed matrix membranes for CO2/CH4 gas separation. Polymer Engineering and Science, 60 (12). pp. 3197-3215.

Lim, Lam Ghai and Ung, Wei Chun and Chan, Yee Ling and Lu, Cheng-Kai and Sutoko, Stephanie and Funane, Tsukasa and Kiguchi, Masashi and Tang, Tong Boon (2020) A unified analytical framework with multiple fNIRS features for mental workload assessment in the prefrontal cortex. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 28 (11). pp. 2367-2376.

M

Minh Loy, A.C. and Yusup, S. and Chan, Y.H. and Borhan, A. and Lim, H.Y. and Minh Loy, A.C. and Yusup, S. and Chan, Y.H. and Borhan, A. and Lim, H.Y. and Shen How, B. and Fui Chin, B.L. (2020) Optimization Study of Syngas Production from Catalytic Air Gasification of Rice Husk. International Journal on Advanced Science, Engineering and Information Technology, 10 (5). pp. 1784-1791.

Majnis, Mohd Fadhil and Chong, Mei Mei and Shaari, Ku Zilati Ku and Adnan, Mohd Azam Mohd (2020) Wettability Study of Chitosan Droplet on Surface-Modified PDMS for Microfluidics Application. Progress in Energy and Environment, 12. pp. 22-29.

Md Moshikur, Rahman and Chowdhury, Md Raihan and Fujisawa, Hiroki and Wakabayashi, Rie and Moniruzzaman, Muhammad and Goto, Masahiro (2020) Design and characterization of fatty acid-based amino acid ester as a new â��greenâ�� hydrophobic ionic liquid for drug delivery. ACS Sustainable Chemistry & Engineering, 8 (36). pp. 13660-13671.

Moshikur, Rahman Md and Ali, Md Korban and Wakabayashi, Rie and Moniruzzaman, Muhammad and Goto, Masahiro (2020) Formation and potential application of micelles composed of biocompatible N-lauroyl-amino acid ionic liquids surfactant. Journal of Molecular Liquids, 320. p. 114424.

Moshikur, Rahman Md and Chowdhury, Md Raihan and Moniruzzaman, Muhammad and Goto, Masahiro (2020) Biocompatible ionic liquids and their applications in pharmaceutics. Green Chemistry, 22 (23). pp. 8116-8139.

Mubashir, Muhammad and Leng, Chew Thiam and Keong, Lau Kok and Jusoh, Norwahyu and others (2020) Study on the effect of process parameters on CO2/CH4 binary gas separation performance over NH2-MIL-53 (Al)/cellulose acetate hollow fiber mixed matrix membrane. Polymer Testing, 81. p. 106223.

Moshikur, Rahman Md and Chowdhury, Md Raihan and Wakabayashi, Rie and Tahara, Yoshiro and Kamiya, Noriho and Moniruzzaman, Muhammad and Goto, Masahiro (2020) Ionic liquids with N-methyl-2-pyrrolidonium cation as an enhancer for topical drug delivery: Synthesis, characterization, and skin-penetration evaluation. Journal of Molecular Liquids, 299. p. 112166.

Mukhtar, Ahmad and Saqib, Sidra and Safdar, Fatma and Hameed, Ayesha and Rafiq, Sikander and Mellon, Nurhayati Binti and Amen, Rabia and Khan, Muhammad Saad and Ullah, Sami and Assiri, Muhammed Ali and others (2020) Experimental and comparative theoretical study of thermal conductivity of MWCNTs-kapok seed oil-based nanofluid. International Communications in Heat and Mass Transfer, 110. p. 104402.

Mehravar, Samira and Fatemi, Shohreh and Komiyama, Masaharu (2020) The role of cerium intercalation in the efficient dry exfoliation of graphene layers at a low temperature. Diamond and Related Materials, 101. p. 107615.

Masrom, S. and Mohamad, M. and Hatim, S.M. and Baharun, N. and Omar, N. and Abd. Rahman, A.S. (2020) Different mutation and crossover set of genetic programming in an automated machine learning. IAES International Journal of Artificial Intelligence, 9 (3). pp. 402-408.

Mukhtar, Ahmad and Saqib, Sidra and Mellon, Nurhayati Binti and Rafiq, Sikander and Babar, Muhammad and Ullah, Sami and Muhammad, Nawshad and Khan, Asim Laeeq and Ayoub, Muhammad and Ibrahim, Muhammad and others (2020) A review on CO2 capture via nitrogen-doped porous polymers and catalytic conversion as a feedstock for fuels. Journal of Cleaner Production, 277. p. 123999.

Mukhtar, Ahmad and Mellon, Nurhayati and Saqib, Sidra and Lee, Siew-Pei and Bustam, Mohamad Azmi (2020) Extension of BET theory to CO 2 adsorption isotherms for ultra-microporosity of covalent organic polymers. SN Applied Sciences, 2. pp. 1-4.

Mukhtar, Ahmad and Mellon, Nurhayati and Saqib, Sidra and Khawar, Anosha and Rafiq, Sikander and Ullah, Sami and Al-Sehemi, Abdullah G and Babar, Muhammad and Bustam, Mohamad Azmi and Khan, Waqar Ali and others (2020) CO2/CH4 adsorption over functionalized multi-walled carbon nanotubes; an experimental study, isotherms analysis, mechanism, and thermodynamics. Microporous and Mesoporous Materials, 294. p. 109883.

Mohamad, M. and Hamid, N.H.A. and Liew, M.S. (2020) Ground response analysis in offshore Terengganu. Malaysian Construction Research Journal, 31 (2). pp. 9-18.

Masri, Asiah Nusaibah and Mutalib, MI Abdul and Yahya, Wan Zaireen Nisa and Aminuddin, Noor Fathanah and Leveque, Jean Marc (2020) Rapid esterification of fatty acid using dicationic acidic ionic liquid catalyst via ultrasonic-assisted method. Ultrasonics sonochemistry, 60. p. 104732.

Mukhtar, Ahmad and Saqib, Sidra and Mellon, Nurhayati Binti and Babar, Muhammad and Rafiq, Sikander and Ullah, Sami and Bustam, Mohamad Azmi and Al-Sehemi, Abdullah G and Muhammad, Nawshad and Chawla, Muhammad (2020) CO2 capturing, thermo-kinetic principles, synthesis and amine functionalization of covalent organic polymers for CO2 separation from natural gas: A review. Journal of Natural Gas Science and Engineering, 77. p. 103203.

Mohd Amiruddin, Ahmad Azharuddin Azhari and Zabiri, Haslinda and Taqvi, Syed Ali Ammar and Tufa, Lemma Dendena (2020) Neural network applications in fault diagnosis and detection: an overview of implementations in engineering-related systems. Neural Computing and Applications, 32. pp. 447-472.

Mustafa, Nur Farhana Ajua and Shariff, Azmi Mohd and Tay, WeeHorng and Abdul Halim, Hairul Nazirah and Yusof, Siti Munirah Mhd and Hermansyah, Heri (2020) Effect of Liquid Flow Rate on Carbon Dioxide Absorption Performance Using Aqueous Potassium Carbonate Promoted with Glycine at Elevated Pressure Condition of Packed Absorption Column. Journal of Computational and Theoretical Nanoscience, 17 (2-3). pp. 957-960.

Mushtaq, Asim and Mukhtar, Hilmi (2020) Recent development of enhanced polymeric blend membranes in gas separation: a review. Journal of the Chemical Society of Pakistan, 42 (2). pp. 282-304.

Musarat, M.A. and Alaloul, W.S. and Liew, M.S. and Maqsoom, A. and Qureshi, A.H. (2020) Investigating the impact of inflation on building materials prices in construction industry. Journal of Building Engineering, 32.

Mustafa, Nur Farhana Ajua and Mohd Shariff, Azmi and Tay, Wee Horng and Abdul Halim, Hairul Nazirah and Mhd Yusof, Siti Munirah (2020) Mass transfer performance study for CO2 absorption into non-precipitated potassium carbonate promoted with glycine using packed absorption column. Sustainability, 12 (9). p. 3873.

Mohsin, Hanan Mohamed and Johari, Khairiraihanna and Shariff, Azmi M (2020) Physicochemical properties of aqueous 2-aminoethanoic acid and N, N-dimethyl-1, 3-diaminopropane as an absorbent for carbon dioxide capture. Journal of Chemical & Engineering Data, 65 (5). pp. 2603-2610.

Mohd Zamri, N.A. and Ibrahim, T. and Nor, N.M. (2020) Design and analysis of tubular slotted linear generators for direct drivewave energy conversion systems. Energies, 13 (23).

Meyghani, B. and Awang, M.B. and Wu, C.S. (2020) Thermal analysis of friction stir processing (FSP) using arbitrary Lagrangian-Eulerian (ALE) and smoothed particle hydrodynamics (SPH) meshing techniques Thermische Analyse einer RÃ¼hrreibverarbeitung mittels beliebiger Lagrange-Euler- und geglÃ¤tteter Partikel-Hydrodynamik-Vernetzungstechniken. Materialwissenschaft und Werkstofftechnik, 51 (5). pp. 550-557.

Mehravar, S. and Fatemi, S. and Komiyama, M. (2020) The role of cerium intercalation in the efficient dry exfoliation of graphene layers at a low temperature. Diamond and Related Materials, 101.

Mohamad, W.F. and Khan, A.A. and Barroy, P. and Durand-Drouhin, O. and Puille, C. and Lahmar, A. and Ahmad, F. (2020) Microstructure and surface characterization of Ni-Cr based composites containing variable solid lubricants. Tribology - Materials, Surfaces and Interfaces, 14 (4). pp. 219-228.

Maidin, M.A.A.B.H. and Sugathan, S. (2020) Future of audit with pro-auditor with data analytics. International Journal of Advanced Trends in Computer Science and Engineering, 9 (1.1 Sp). pp. 22-27.

Mohd Johari, S.A. and Aqsha, A. and Osman, N.B. and Shamsudin, M.R. and Ameen, M. and Dol, S.S. (2020) Enhancing biogas production in anaerobic co-digestion of fresh chicken manure with corn stover at laboratory scale. SN Applied Sciences, 2 (7).

Mukhtar, A. and Mellon, N. and Saqib, S. and Lee, S.-P. and Bustam, M.A. (2020) Extension of BET theory to CO2 adsorption isotherms for ultra-microporosity of covalent organic polymers. SN Applied Sciences, 2 (7).

Mausor, F.H. and Jaafar, J. and Mohdtaib, S. (2020) Fuzzy C means imputation of missing values with ant colony optimization. International Journal of Advanced Trends in Computer Science and Engineering, 9 (1 Spec). pp. 145-149.

Mohamad, W.F. and Khan, A.A. and Ahmad, F. and Yassin, A. (2020) Phase a nal ysis and m icrostructure s tudy of s intered Ni-Crc omposites containing MoS2, Ag and CaF2additives as solid l ubricants. Journal of Mechanical Engineering and Sciences, 14 (2). pp. 6548-6556.

Meraj, S.T. and Hasan, K. and Masaoud, A. (2020) Design and application of SPWM based 21-level hybrid inverter for induction motor drive. Turkish Journal of Electrical Engineering and Computer Sciences, 28 (6). pp. 3219-3234.

Mushtaq, Asim and Mukhtar, Hilmi (2020) Recent development of enhanced polymeric blend membranes in gas separation: a review. Journal of the Chemical Society of Pakistan, 42 (2). pp. 282-304.

Mohamed, Mohamed Janshir Bin Gulam and Mannan, Hafiz Abdul and Nasir, Rizwan and Mohshim, Dzeti Farhah and Mukhtar, Hilmi and Abdulrahman, Aymn and Ahmed, Anas (2020) Composite mixed matrix membranes incorporating microporous carbon molecular sieve as filler in polyethersulfone for CO2/CH4 separation. Journal of Applied Polymer Science, 137 (12). p. 48476.

Mohamad, M. and Wannahari, R. and Azzahra Ahmad Kamal, A. and Mohammad, R. and Che Zaudin, N.A. and Shwu Hwa, C. and Wei, L.J. (2020) SPENT COFFEE GROUNDS BIO CHAR AS A LOW-COST ADSORBENT FOR METHYLENE BLUE REMOVAL FROM AQUEOUS SOLUTION: OPTIMISATION USING RESPONSE SURFACE METHODOLOGY. ARPN Journal of Engineering and Applied Sciences, 15 (3). pp. 437-447.

Memon, A.M. and Hartadi Sutanto, M. and Napiah, M. and Khan, M.I. and Rafiq, W. (2020) Modeling and optimization of mixing conditions for petroleum sludge modified bitumen using response surface methodology. Construction and Building Materials, 264.

Maulud, A.S. and Nawaz, M. and Zabiri, H. and Suleman, H. and Tufa, L.D. (2020) Multiscale framework for real-time process monitoring of nonlinear chemical process systems. Industrial and Engineering Chemistry Research, 59 (41). pp. 18595-18606.

Mohd Laziz, A. and KuShaari, K. and Azeem, B. and Yusup, S. and Chin, J. and Denecke, J. (2020) Rapid production of biodiesel in a microchannel reactor at room temperature by enhancement of mixing behaviour in methanol phase using volume of fluid model. Chemical Engineering Science, 219.

Mohmmed, A.O. and Al-Kayiem, H.H. and Osman, A.B. and Sabir, O. (2020) One-way coupled fluidâ��structure interaction of gasâ��liquid slug flow in a horizontal pipe: Experiments and simulations. Journal of Fluids and Structures, 97.

Mohammad, S.T. and Al-Kayiem, H.H. and Aurybi, M.A. and Khlief, A.K. (2020) Measurement of global and direct normal solar energy radiation in Seri Iskandar and comparison with other cities of Malaysia. Case Studies in Thermal Engineering, 18.

Meraj, S.T. and Yahaya, N.Z. and Hasan, K. and Masaoud, A. (2020) Single phase 21 level hybrid multilevel inverter with reduced power components employing low frequency modulation technique. International Journal of Power Electronics and Drive Systems, 11 (2). pp. 810-822.

Mohammadi Dehcheshmeh, E. and Safarabadi, M. and Mousavi Mashhadi, M. and Mustapha, M. (2020) Numerical study of fatigue behavior of the aluminum 7075-t6 cantilever beam with angular cracks in different stress ratios. Engineering Solid Mechanics, 9 (1). pp. 77-92.

Mansor, R. and Kasim, M.M. and Othman, M. (2020) Weighted subsethood segmented fuzzy time series for moving holiday electricity load demand forecasting. Journal of Advanced Research in Dynamical and Control Systems, 12 (Specia). pp. 686-700.

Mohammed, K.I. and Jaafar, J. and Zaidan, A.A. and Albahri, O.S. and Zaidan, B.B. and Abdulkareem, K.H. and Jasim, A.N. and Shareef, A.H. and Baqer, M.J. and Albahri, A.S. and Alsalem, M.A. and Alamoodi, A.H. (2020) A Uniform Intelligent Prioritisation for Solving Diverse and Big Data Generated from Multiple Chronic Diseases Patients Based on Hybrid Decision-Making and Voting Method. IEEE Access, 8. pp. 91521-91530.

Martins, O.A. and Issa, K. and Abdulraheem, A. and Adebayo, A.O. and Taofeeq, A.A. and Aliu, O. and Lanre, A.L. and Fatai, W.A. (2020) Numerical Simulation of Entropy Generation For Casson Fluid Flow Through Permeable Walls And Convective Heating With Thermal Radiation Effect. Journal of the Serbian Society for Computational Mechanics, 14 (2). pp. 149-165.

Mohamad Annuar, A. and Mat Nawi, N.I. and Bilad, M.R. and Jaafar, J. and Marbelia, L. and Nandianto, A.B.D. (2020) Improved bubbling for membrane fouling control in filtration of palm oil mill effluent anaerobic digester sludge. Journal of Water Process Engineering, 36.

Mahmood, S.N. and Ishak, A.J. and Saeidi, T. and Alsariera, H. and Alani, S. and Ismail, A. and Soh, A. (2020) Recent Advances in Wearable Antenna Technologies: A Review. Progress In Electromagnetics Research B, 89. pp. 1-27.

Musa, M.S.M. and Sulaiman, W.R.W. and Majid, Z.A. and Majid, Z.A. and Idris, A.K. and Rajaei, K. (2020) Henna extract as a potential sacrificial agent in reducing surfactant adsorption on kaolinite: The role of salinity. Journal of King Saud University - Engineering Sciences, 32 (8). pp. 543-547.

Mansur, F.Z. and Faizal, C.K.M. and Samad, N.A.F.A. and Atnaw, S.M. and Sulaiman, S.A. (2020) Gasification performance of sawdust, pelletized sawdust and sub-bituminous coal in a downdraft gasifier. SN Applied Sciences, 2 (9).

Mukhtar, A. and Mellon, N. and Saqib, S. and Khawar, A. and Rafiq, S. and Ullah, S. and Al-Sehemi, A.G. and Babar, M. and Bustam, M.A. and Khan, W.A. and Tahir, M.S. (2020) CO2/CH4 adsorption over functionalized multi-walled carbon nanotubes; an experimental study, isotherms analysis, mechanism, and thermodynamics. Microporous and Mesoporous Materials, 294.

Mehat, N.M. and Zainuddin, M.A. and Kamaruddin, S. and Khan, Z.A. (2020) OPTIMIZATION OF MULTI FACTORS FOR INJECTION-MOULDED MICRO GEAR VIA NUMERICAL SIMULATION INTEGRATED WITH THE TAGUCHI METHOD AND PRINCIPAL COMPONENT ANALYSIS. Journal of Advanced Manufacturing Technology, 14 (2). pp. 43-56.

Muneer, A. and Fati, S.M. (2020) Efficient and automated herbs classification approach based on shape and texture features using deep learning. IEEE Access, 8. pp. 196747-196764.

Mohamad Radzi, M.I.F. and Ali, N.H.N. and Mohd Ariffin, A. and Abd Rahman, M.S. and Rameli, N. and Ahmad, M.R. and Mohd Salleh, A.S. (2020) Development process and testing of partial discharge detection device on medium voltage XLPE cable. Indonesian Journal of Electrical Engineering and Computer Science, 19 (3). pp. 1297-1305.

Mukhtar, A. and Saqib, S. and Mellon, N.B. and Rafiq, S. and Babar, M. and Ullah, S. and Muhammad, N. and Khan, A.L. and Ayoub, M. and Ibrahim, M. and Maqsood, K. and Bustam, M.A. and Al-Sehemi, A.G. and KlemeÅ¡, J.J. and Asif, S. and Bokhari, A. (2020) A review on CO2 capture via nitrogen-doped porous polymers and catalytic conversion as a feedstock for fuels. Journal of Cleaner Production, 277.

Marmolejo-Saucedo, J.A. and Vasant, P. (2020) Intelligent computing in science and technology. Wireless Networks, 26 (7). pp. 4739-4741.

Memon, Muhammad Khan and Elraies, Khaled Abdalla and Al-Mossawy, Mohammed Idrees Ali (2020) Performance of surfactant blend formulations for controlling gas mobility and foam propagation under reservoir conditions. JOURNAL OF PETROLEUM EXPLORATION AND PRODUCTION TECHNOLOGY, 10 (8). pp. 3961-3969.

Meyghani, B. and Emamian, S. and Awang, M. and Wu, C.S. (2020) Finite element modeling of nano porous sintered silver material. Lecture Notes in Mechanical Engineering. pp. 55-67.

Mujtaba, S.M. and Lemma, T.A. and Gebremariam, M.A. (2020) Fault detection system for long-distance gas mixture pipelines using statistical features. Lecture Notes in Mechanical Engineering. pp. 287-303.

Machmudah, A. and Lemma, T.A. (2020) Design-point performance adaptation of small gas turbine using particle swarm optimization. Lecture Notes in Mechanical Engineering. pp. 411-423.

Meyghani, B. and Awang, M. and Wu, C.S. and Emamian, S. (2020) Temperature distribution investigation during friction stir welding (fsw) using smoothed-particle hydrodynamics (sph). Lecture Notes in Mechanical Engineering. pp. 749-761.

Mujahid, Y. and Sallih, N. and Abdullah, M.Z. (2020) A comparison of single-vacuum-bag and double-vacuum-bag methods for manufacturing high-quality laminated composites. Lecture Notes in Mechanical Engineering. pp. 457-467.

Machmudah, A. and Lemma, T.A. (2020) Design-point performance adaptation of small gas turbine using particle swarm optimization. Lecture Notes in Mechanical Engineering. pp. 411-423.

Matem, R. and Aljunid, S.A. and Junita, M.N. and M. Rashidi, C.B. and Saad, N.M. (2020) Vehicular Ad Hoc Networks Security for Smart Cities Based on 2D ZCC/MD Optical CDMA Code. Advances in Intelligent Systems and Computing, 1144. pp. 111-120.

Mohyaldinn, M.E. and Ismail, M.C. and Hasan, N. (2020) A Correlation to Predict Erosion Due to Sand Entrainment in Viscous Oils Flow Through Elbows. Lecture Notes in Mechanical Engineering. pp. 287-297.

Meyghani, B. and Awang, M. (2020) Developing a Finite Element Model for Thermal Analysis of Friction Stir Welding (FSW) Using Hyperworks. Lecture Notes in Mechanical Engineering. pp. 619-628.

Myagkov, L. and Chirskiy, S. and Panchenko, V. and Kharchenko, V. and Vasant, P. (2020) Application of the Topological Optimization Method of a Connecting Rod Forming by the BESO Technique in ANSYS APDL. Advances in Intelligent Systems and Computing, 1072. pp. 239-248.

Mohammed, B.S. and Aswin, M. and Liew, M.S. (2020) Prediction of failure load of RC and R-ECC dapped-end beams. Case Studies in Construction Materials, 13.

Memon, M.K. and Elraies, K.A. and Al-Mossawy, M.I.A. (2020) Performance of surfactant blend formulations for controlling gas mobility and foam propagation under reservoir conditions. Journal of Petroleum Exploration and Production Technology, 10 (8). pp. 3961-3969.

Mukhtar, A. and Mellon, N.B. and Bustam, M.A. and Saqib, S. and Lee, S.-P. and Kareem, F.A. and Ullah, S. (2020) Impact of amine functionality on the selective CO2/CH4 adsorption behavior of porous covalent triazine adsorbent. Journal of Natural Gas Science and Engineering, 83.

Muneer, A. and Fati, S.M. (2020) A comparative analysis of machine learning techniques for cyberbullying detection on twitter. Future Internet, 12 (11). pp. 1-21.

May, Z. and Alam, M.K. and Rahman, N.A.A. and Mahmud, M.S. and Nayan, N.A. (2020) Denoising of hydrogen evolution acoustic emission signal based on non-decimated stationary wavelet transform. Processes, 8 (11). pp. 1-19.

May, Z. and Alam, M.K. and Mahmud, M.S. and Rahman, N.A. (2020) Unsupervised bivariate data clustering for damage assessment of carbon fiber composite laminates. PLoS ONE, 15 (11 Nov).

Mohd Amin, U.S.B. and Osman, N.B. and Uemura, Y. and Majid, N.M.N.A. (2020) Catalytic Transfer Hydrogenation of Castor Oil Using Glycerol-Based Reaction. Waste and Biomass Valorization, 11 (10). pp. 5591-5597.

Marmolejo-Saucedo, J.A. and Vasant, P. (2020) Intelligent computing in science and technology. Wireless Networks, 26 (7). pp. 4739-4741.

Mat-Shayuti, M.S. and Tuan Ya, T.M.Y.S. and Abdullah, M.Z. and Md Yusop, N. and Kamarrudin, N. and Myo Thant, M.M. and Che Daud, M.F. (2020) Simulations of different power intensity inputs towards pressure, velocity & cavitation in ultrasonic bath reactor. South African Journal of Chemical Engineering, 34. pp. 57-62.

Meroni, D. and JimÃ©nez-Salcedo, M. and Falletta, E. and Bresolin, B.M. and Kait, C.F. and Boffito, D.C. and Bianchi, C.L. and Pirola, C. (2020) Sonophotocatalytic degradation of sodium diclofenac using low power ultrasound and micro sized TiO2. Ultrasonics Sonochemistry, 67.

Musa, M. and Isha, A.S.N. (2020) Substantial effect of voluntary policy interventions on aircraft ground handling safety. Journal of Air Transport Management, 89.

Md Moshikur, R. and Chowdhury, M.R. and Fujisawa, H. and Wakabayashi, R. and Moniruzzaman, M. and Goto, M. (2020) Design and Characterization of Fatty Acid-Based Amino Acid Ester as a New "green" Hydrophobic Ionic Liquid for Drug Delivery. ACS Sustainable Chemistry and Engineering, 8 (36). pp. 13660-13671.

Mehravar, S. and Fatemi, S. and Komiyama, M. (2020) Magnetic property and structural study of nickel supported on reduced graphene oxide prepared by chemical vapor deposition. Surface and Interface Analysis, 52 (9). pp. 547-552.

Mohd Nazir, L.S. and Yeong, Y.F. and Chew, T.L. (2020) Controlled growth of Faujasite zeolite with NaX topology by manipulating solution aging and Na2O/Al2O3 ratios. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 600.

Mulyati, S. and Muchtar, S. and Arahman, N. and Syamsuddin, Y. and Mat Nawi, N.I. and Harun, N.Y. and Bilad, M.R. and Firdaus, Y. and Takagi, R. and Matsuyama, H. (2020) Two-step dopamine-to-polydopamine modification of polyethersulfone ultrafiltration membrane for enhancing anti-fouling and ultraviolet resistant properties. Polymers, 12 (9).

Majid, M.A.A. and Muhammad, M. and Hampo, C.C. and Akmar, A.B. (2020) Analysis of a thermal energy storage tank in a large district cooling system: A case study. Processes, 8 (9).

Mujahid, Y. and Sallih, N. and Mustapha, M. and Abdullah, M.Z. and Mustapha, F. (2020) Effects of processing parameters for vacuum-bagging-only method on shape conformation of laminated composites. Processes, 8 (9).

Mehravar, S. and Fatemi, S. and Komiyama, M. (2020) Highly selective hydrogen production from propane by Ruâ��Ni coreâ��shell nanocatalyst deposited on reduced graphene oxide by sequential chemical vapor deposition. International Journal of Energy Research, 44 (10). pp. 8000-8013.

May, Z. and Alam, M.K. and Husain, K. and Hasan, M.K. (2020) An enhanced dynamic transmission opportunity scheme to support varying traffic load over wireless campus networks. PLoS ONE, 15 (8 Augu).

Motlagh, S.R. and Harun, R. and Biak, D.R.A. and Hussain, S.A. and Elgharbawy, A.A. and Khezri, R. and Wilfred, C.D. (2020) Prediction of potential ionic liquids (ILS) for the solidâ��liquid extraction of docosahexaenoic acid (DHA) from microalgae using COSMO-RS screening model. Biomolecules, 10 (8). pp. 1-20.

Moradpour, N. and Karimova, M. and Pourafshary, P. and Zivar, D. (2020) Effects of Slug Size, Soaking, and Injection Schemes on the Performance of Controlled Ions Water Flooding in Carbonates. ACS Omega, 5 (29). pp. 18155-18167.

Mulyati, S. and Muchtar, S. and Arahman, N. and Meirisa, F. and Syamsuddin, Y. and Zuhra, Z. and Rosnelly, C.M. and Shamsuddin, N. and Nawi, N.I.M. and Wirzal, M.D.H. and Bilad, M.R. and Takagi, R. and Matsuyama, H. (2020) One-Pot polymerization of dopamine as an additive to enhance permeability and antifouling properties of polyethersulfone membrane. Polymers, 12 (8).

Mohammed, B.S. and Yen, L.Y. and Haruna, S. and Seng Huat, M.L. and Abdulkadir, I. and Al-Fakih, A. and Liew, M.S. and Abdullah Zawawi, N.A.W. (2020) Effect of elevated temperature on the compressive strength and durability properties of crumb rubber engineered cementitious composite. Materials, 13 (16).

Manogaran, M Devendran and Mansor, Nurlidia and Affendi, Nur Mahfuzah Noor and Baloo, Lavania and Salehuddin, Nurliana Farhana (2020) Optimisation of diallyl disulfide concentration and effect of soil condition on urease inhibition. Plant, Soil and Environment, 66 (2). pp. 81-85.

N

Nashed, O and Lal, B and Maulud, AS and Shariff, AM (2020) Completion time of CH4 hydrate formation in the presence of copper nanofluid. Journal of Green Engineering, 10 (12). pp. 13321-13328.

Nazir, Liyana Salwa Mohd and Yeong, Yin Fong and Chew, Thiam Leng (2020) Controlled growth of Faujasite zeolite with NaX topology by manipulating solution aging and Na2O/Al2O3 ratios. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 600. p. 124803.

Nazir, Liyana Salwa Mohd and Yeong, Yin Fong and Chew, Thiam Leng (2020) Methods and synthesis parameters affecting the formation of FAU type zeolite membrane and its separation performance: a review. Journal of Asian Ceramic Societies, 8 (3). pp. 553-571.

Nawaz, Muhammad and Maulud, Abdulhalim Shah and Zabiri, Haslinda and Suleman, Humbul and Tufa, Lemma Dendena (2020) Multiscale framework for real-time process monitoring of nonlinear chemical process systems. Industrial & Engineering Chemistry Research, 59 (41). pp. 18595-18606.

Nguyen, Thanh Tien and Lam, Man Kee and Uemura, Yoshimitsu and Mansor, Nurlidia and Lim, Jun Wei and Show, Pau Loke and Tan, Inn Shi and Lim, Steven (2020) High biodiesel yield from wet microalgae paste via in-situ transesterification: effect of reaction parameters towards the selectivity of fatty acid esters. Fuel, 272. p. 117718.

Nashed, O and Lal, B and Maulud, AS and Shariff, AM (2020) Completion time of CH4 hydrate formation in the presence of copper nanofluid. Journal of Green Engineering, 10 (12). pp. 13321-13328.

Narahari, M. and Suresh Kumar Raju, S. and Pendyala, R. and Ilyas, S.U. (2020) Numerical investigation of unsteady multiphase nanofluid-free convection flow about a vertical cylinder with non-uniform temperature. Journal of Thermal Science and Engineering Applications, 12 (3).

Nguyen, Trinh Duy and Nguyen, Van-Huy and Nanda, Sonil and Vo, Dai-Viet N and Nguyen, Vinh Huu and Van Tran, Thuan and Nong, Linh Xuan and Nguyen, Thuong Thi and Bach, Long-Giang and Abdullah, Bawadi and others (2020) BiVO 4 photocatalysis design and applications to oxygen production and degradation of organic compounds: a review. Environmental Chemistry Letters, 18. pp. 1779-1801.

Nissar, Z. and Rybdylova, O. and Sazhin, S.S. and Heikal, M. and Aziz, A.R.B.A. and Ismael, M.A. (2020) A model for puffing/microexplosions in water/fuel emulsion droplets. International Journal of Heat and Mass Transfer, 149.

Ng, C.Y. and Tuhaijan, S.N.A. and Fattah, M.Z.A. and John Kurian, V. and Mustaffa, Z. (2020) Experimental investigation of directional hydrodynamic coefficients and the effects on wave force due to spreading angles. Ain Shams Engineering Journal, 11 (4). pp. 1021-1034.

Noda, Y. and Shibata, F. and Fukuda, S. and Yong, G.L.S. and Sakaguchi, H. and Yonemura, H. (2020) Synergetic effect of silver nanoplate and magnetic field on photon upconversion based on sensitized triplet-triplet annihilation in polymer system. Japanese Journal of Applied Physics, 59 (SD).

Niazi, U.M. and Nasif, M.S. and Muhammad, M. (2020) Effect of wind directions on human injury and fatality risk modeling due to vapor cloud explosion in offshore platforms. Process Safety Progress, 39 (S1).

Nandiyanto, A.B.D. and Erlangga, T.M.S. and Mufidah, G. and Anggraeni, S. and Bilad, R. and Yunas, J. (2020) Adsorption Isotherm Characteristics of Calcium Carbonate Microparticles Obtained from Barred Fish (Scomberomorus spp.) Bone Using Two-Parameter Multilayer Adsorption Models. International Journal of Nanoelectronics and Materials, 13. pp. 45-58.

Nasir, Rizwan and Mannan, Hafiz Abdul and Qadir, Danial and Mukhtar, Hilmi and Mohshim, Dzeti Farhah and Abdulrahman, Aymn (2020) Gas Transport through Mixed Matrix Membranes (MMMs) Fundamentals and Modeling. Modeling in Membranes and Membrane-Based Processes. pp. 237-256.

Nawaz, R. and Kait, C.F. and Chia, H.Y. and Isa, M.H. and Huei, L.W. (2020) Photocatalytic remediation of treated palm oil mill effluent contaminated with phenolic compounds using tio2 nanomaterial. Desalination and Water Treatment, 183. pp. 355-365.

Nasir, N and Saad, NH and Wahab, NHA and Abdullah, B and Alam, Shah and Sahab, ARM (2020) New Slip Formulation of Fine Bone China Product for Ceramic Slip Rotary Moulding Process.

Nandiyanto, A.B.D. and Arinalhaq, Z.F. and Rahmadianti, S. and Dewi, M.W. and Rizky, Y.P.C. and Maulidina, A. and Anggraeni, S. and Bilad, M.R. and Yunas, J. (2020) Curcumin adsorption on carbon microparticles: Synthesis from soursop (annonamuricata l.) peel waste, adsorption isotherms and thermodynamic and adsorption mechanism. International Journal of Nanoelectronics and Materials, 13 (Specia). pp. 173-192.

Noor Affendi, Nur Mahfuzah and Mansor, Nurlidia and Samiri, Siti Syazwani (2020) Addition of chemical and natural urease inhibitors in reducing ammonia and nitrous oxide losses. Journal of Soil Science and Plant Nutrition, 20. pp. 253-258.

Naseer, A. and Hamid, A. and Ghauri, M. and Nasrullah, A. and Iqbal, J. and Shah, N.S. and Rafiq, S. and Irfan, M. and Muhammad, N. (2020) Lignin/alginate/hydroxyapatite composite beads for the efficient removal of copper and nickel ions from aqueous solutions. Desalination and Water Treatment, 184. pp. 199-213.

Naqvi, S.F. and Ali, S.S.A. and Yahya, N. and Yasin, M.A. and Hafeez, Y. and Subhani, A.R. and Adil, S.H. and Saggaf, U.M.A. and Moinuddin, M. (2020) Real-time stress assessment using sliding window based convolutional neural network. Sensors (Switzerland), 20 (16). pp. 1-17.

Nomanbhay, S. and Ong, M.Y. and Chew, K.W. and Show, P.-L. and Lam, M.K. and Chen, W.-H. (2020) Organic carbonate production utilizing crude glycerol derived as by-product of biodiesel production: A review. Energies, 13 (6).

Najib, Yasmeen Nadhirah Ahmad and Daud, Hanita and Abd Aziz, Azrina (2020) Singular Value Thresholding Algorithm for Wireless Sensor Network Localization. MATHEMATICS, 8 (3).

Nurshafiq Ramli, M. and Rani, A.M.A. and Sallih, N. and Aliyu, A.A.A. and Rao, T.V.V.L.N. (2020) Vibration Analysis Methods for Misalignment and Tolerance Problems in Machine Systems: A Review. Lecture Notes in Mechanical Engineering. pp. 57-66.

Nematova, G. and Amin, A. and Rehman, M. and Hussain, N. (2020) Social Media, Software Engineering Collaboration Tools and Software Companyâ��s Performance. Lecture Notes in Electrical Engineering, 603. pp. 179-188.

Nikbakht, E. and Shuhadah, N.I. and Ganapathy, Ramanathan A/L and Subramaniam, Shukanthi A/P and Bakar, N.A. (2020) Structural Behaviour of Strengthened High-Performance Concrete-Filled Double Skin Steel Tube Beams. Lecture Notes in Civil Engineering, 59. pp. 87-93.

Nashed, O. and Lal, B. and Shariff, A.M. and Sabil, K.M. (2020) Gas Hydrate Promoters. Green Energy and Technology. pp. 47-65.

Nashed, O. and Lal, B. and Maulud, A.S. and Shariff, A.M. (2020) Completion time of CH4 hydrate formation in the presence of copper nanofluid. Journal of Green Engineering, 10 (12). pp. 13321-13328.

Nandiyanto, A.B.D. and Ragadhita, R. and Sukmafitri, A. and Bilad, M.R. and Aziz, M. and Yunas, J. (2020) Mechanical impact in disk mill for producing controlled rice husk particle size by changing impactor shapes and disk rotation speeds Kesan mekanikal di kilang cakera untuk menghasilkan saiz zarah sekam padi terkawal dengan mengubah bentuk impak dan kelajuan putaran cakera. Sains Malaysiana, 49 (12). pp. 2927-2940.

Naseer, S. and Ali, R.F. and Dominic, P.D.D. and Saleem, Y. (2020) Learning representations of network traffic using deep neural networks for network anomaly detection: A perspective towards oil and gas it infrastructures. Symmetry, 12 (11). pp. 1-28.

Nosbi, N. and Marzuki, H.F.A. and Zakaria, M.R. and Ali, W.F.F.W. and Javed, F. and Ibrar, M. (2020) Structure property investigation of glass-carbon prepreg waste-polymer hybrid composites degradation in water condition. Processes, 8 (11). pp. 1-13.

Niazi, M.B.K. and Jahan, Z. and Ahmed, A. and Uzair, B. and Mukhtar, A. and Gregersen, Ã�.W. (2020) Mechanical and thermal properties of carboxymethyl fibers (CMF)/PVA based nanocomposite membranes. Journal of Industrial and Engineering Chemistry, 90. pp. 122-131.

Nawaz, F. and Jeoti, V. (2020) Efficient data delivery in dense reader environment of passive sensor network. Journal of Ambient Intelligence and Humanized Computing, 11 (9). pp. 3707-3715.

Nawi, N.I.M. and Bilad, M.R. and Anath, G. and Nordin, N.A.H. and Kurnia, J.C. and Wibisono, Y. and Arahman, N. (2020) The water flux dynamic in a hybrid forward osmosis-membrane distillation for produced water treatment. Membranes, 10 (9). pp. 1-13.

Nabihah-Fauzi, N. and Asikin-Mijan, N. and Ibrahim, M.L. and Hashim, H. and Yusup, S. and Taufiq-Yap, Y.H. and Mastuli, M.S. (2020) Sulfonated SnO2nanocatalysts: Via a self-propagating combustion method for esterification of palm fatty acid distillate. RSC Advances, 10 (49). pp. 29187-29201.

Nawaz, R. and Kait, C.F. and Chia, H.Y. and Isa, M.H. and Huei, L.W. (2020) Structural elucidation of coreâ��shell TiO2 nanomaterials for environmental pollutants removal: A focused mini review. Environmental Technology and Innovation, 19.

Nadirah, B.N. and Ong, C.C. and Saheed, M.S.M. and Yusof, Y.M. and Shukur, M.F. (2020) Structural and conductivity studies of polyacrylonitrile/methylcellulose blend based electrolytes embedded with lithium iodide. International Journal of Hydrogen Energy, 45 (38). pp. 19590-19600.

Negash, B.M. and Him, P.C. (2020) Reconstruction of missing gas, oil, and water flow-rate data: A unified physics and data-based approach. SPE Reservoir Evaluation and Engineering, 23 (3). pp. 1019-1030.

Nguyen, T.D. and Nguyen, V.-H. and Nanda, S. and Vo, D.-V.N. and Nguyen, V.H. and Van Tran, T. and Nong, L.X. and Nguyen, T.T. and Bach, L.-G. and Abdullah, B. and Hong, S.-S. and Van Nguyen, T. (2020) BiVO4 photocatalysis design and applications to oxygenÂ productionÂ and degradation of organic compounds: a review. Environmental Chemistry Letters, 18 (6). pp. 1779-1801.

O

Ong, Yue Seong and Shaari, Ku Zilati Ku and Laziz, Afiq Mohd and Lu, Inn Leon and Samsudin, Mohamad Fakhrul Ridhwan and Sufian, Suriati (2020) Thermal performance of graphene oxide nanofluid in microchannel heat exchanger. Journal of Enhanced Heat Transfer, 27 (5).

Ong, Yue Seong and Ku Shaari, Ku Zilati (2020) CFD investigation of the effect of manifold and microchannel ratio on the hydrodynamic performance of microchannel heat sink. SN Applied Sciences, 2. pp. 1-17.

Ong, Yue Seong and KuShaari, KuZilati (2020) CFD investigation of the feasibility of polymer-based microchannel heat sink as thermal solution. Chinese Journal of Chemical Engineering, 28 (4). pp. 980-994.

Othman, Nurzatil Aqmar and Tufa, Lemma Dendena and Zabiri, Haslinda and Jalil, Abdullah Al-Mubarak Md and Rostani, Khairul (2020) Enhancing the Supersonic Gas Separation operating envelope through process control strategies of the feed conditioning plant for offshore CO2 removal from natural gas. International Journal of Greenhouse Gas Control, 94. p. 102928.

Othman, M.F.H. and Rashidi, N.A. and Yusup, S. and Kida, T. (2020) Bifunctional graphene oxide-copper coated nickel mesh and its electrocatalysis towards ethanol production: A preliminary analysis. Materials Letters, 275.

Ong, Y.S. and Shaari, K.Z.K. and Laziz, A.M. and Lu, I.L. and Samsudin, M.F.R. and Sufian, S. (2020) Thermal performance of graphene oxide nanofluid in microchannel heat exchanger. Journal of Enhanced Heat Transfer, 27 (5). pp. 439-461.

Ong, C.C. and Jose, R. and Saheed, M.S.M. (2020) Phase transformed iron oxide â�� iron (oxy) hydroxide composite nanoflorets grown on foam-like graphene as a high performing adsorbent. Chemical Engineering Journal, 388.

Ong, C.C. and Siva Sangu, S. and Illias, N.M. and Chandra Bose Gopinath, S. and Saheed, M.S.M. (2020) Iron nanoflorets on 3D-graphene-nickel: A â��Dandelionâ�� nanostructure for selective deoxynivalenol detection. Biosensors and Bioelectronics, 154.

Omar, N.S.S.B. and Jung, Low Tan and Rahim, L.A.B. (2020) A Review on Correlating Gas District Cooling (GDC) Model with Data Center (DC) Operation for Environmental and Economic Performance. Lecture Notes in Electrical Engineering, 619. pp. 35-47.

Othman, I. and Azman, A. (2020) Safety Misbehaviour and Its Effect Towards Safety Performance of Construction Projects. Lecture Notes in Civil Engineering, 59. pp. 193-200.

Ong, Y.S. and Ku Shaari, K.Z. (2020) CFD investigation of the effect of manifold and microchannel ratio on the hydrodynamic performance of microchannel heat sink. SN Applied Sciences, 2 (7).

Othman, N.A. and Tufa, L.D. and Zabiri, H. and Jalil, A.A.-M.M. and Rostani, K. (2020) Enhancing the Supersonic Gas Separation operating envelope through process control strategies of the feed conditioning plant for offshore CO2 removal from natural gas. International Journal of Greenhouse Gas Control, 94.

Owais, M. and Mehdi, M. and Hassan, M.A. and Jokhio, M.H. and Raza, G. (2020) The synergetic effect of hot rolling and heat treatment on mechanical properties: AISI-1045 and JIS-SUP 9 Steel. Journal of Testing and Evaluation, 48 (4).

Osman, A.B. and Ovinis, M. (2020) A review of in-situ optical flow measurement techniques in the Deepwater Horizon oil spill. Measurement: Journal of the International Measurement Confederation, 153.

Oladosu, T.L. and Baheta, A.T. and Hussain, P.B. (2020) Liquid desiccant membrane regeneration of des for air conditioning systems using electrodialysis technique. Lecture Notes in Mechanical Engineering. pp. 243-252.

Othman, I. and Azman, A. (2020) Safety Misbehaviour and Its Effect Towards Safety Performance of Construction Projects. Lecture Notes in Civil Engineering, 59. pp. 193-200.

Othman, F.E.C. and Yusof, N. and Harun, N.Y. and Bilad, M.R. and Jaafar, J. and Aziz, F. and Salleh, W.N. and Ismail, A.F. (2020) Novel activated carbon nanofibers composited with cost-effective graphene-based materials for enhanced adsorption performance toward methane. Polymers, 12 (9).

Ong, C.C. and Mohamed, N.M. and Saheed, M.S.M. (2020) Hollow three-dimensional graphene reinforced with poly (methyl methacrylate) for selective absorption of oil. Fullerenes Nanotubes and Carbon Nanostructures, 29 (2). pp. 149-155.

P

Patel, M.C. and Abdalla Ayoub Mohammed, M. and Padmanabhan, E. and Zolotukhin, A. (2020) A brief review on behavior of sandstone, limestone and shale rocks under laser radiations. International Journal of Emerging Trends in Engineering Research, 8 (1 1.2 ). pp. 213-220.

Patrick, David Onoja and Yusup, Suzana and Osman, Noridah B and Zabiri, Haslinda and Uemura, Yoshimitsu and Shahbaz, Muhammad (2020) Thermogravimetric kinetics of catalytic and non-catalytic pyrolytic conversion of palm kernel shell with acid-treated coal bottom ash. BioEnergy research, 13. pp. 452-462.

Pasha, Mohsin and Zaini, Dzulkarnain and Shariff, Azmi Mohd (2020) Prototype tool for inherent safety level assessment of a heat exchanger network. Chemical Engineering & Technology, 43 (7). pp. 1268-1275.

Pham, Loi Hoang Huy Phuoc and Rusli, Risza and Shariff, Azmi Mohd and Khan, Faisal (2020) Dispersion of carbon dioxide bubble release from shallow subsea carbon dioxide storage to seawater. Continental Shelf Research, 196. p. 104075.

Pransisco, P. and Balbir Singh, M.S. and Shuaib, M. and Shukur, M.F. and Joseph, E. (2020) 3D graphene/fly ash waste material for hybrid supercapacitor electrode: specific capacitance analysis 3D-Graphen/Flugasche Abfallmaterial fÃ¼r Hybrid-Superkondensatorelektrode: Spezifische KapazitÃ¤tsanalyse. Materialwissenschaft und Werkstofftechnik, 51 (6). pp. 713-718.

Paramaguru, D. and Pedapati, S.R. and Awang, M. and Mohebbi, H. and Sharma, K.V. (2020) Effect of process parameters on mechanical properties of AA5052 joints using underwater friction stir welding. Journal of Mechanical Engineering and Sciences, 14 (1). pp. 6259-6271.

Patel, M.S. and Liew, M.S. and Mustaffa, Z. and Abdurasheed, A.S. and Whyte, A. (2020) Downtime cost analysis of offloading operations under irregular waves in Malaysian waters. Ocean Systems Engineering, 10 (2). pp. 131-161.

Pao, W. and Memon, Z.Q. (2020) Numerical evaluation of separation efficiency in converging T-junction with slug flow. International Journal of Numerical Methods for Heat and Fluid Flow, 30 (7). pp. 3515-3534.

Patel, M.S. and Azizan, N. and Liew, M.S. and Mustaffa, Z. and Ali, M.O. and Whyte, A. (2020) A numerical study: Transitional hydrodynamic behaviour of a moored barge in different ultra-shallow water depths of Malaysia. Open Civil Engineering Journal, 13 (1). pp. 238-259.

Partoon, Behzad and Sahith, S Jai Krishna and Lal, Bhajan and Maulud, AS Bin and others (2020) Gas hydrate models. Chemical additives for gas hydrates. pp. 67-85.

Pasha, M. and Zaini, D. and Shariff, A.M. (2020) Prototype Tool for Inherent Safety Level Assessment of a Heat Exchanger Network. Chemical Engineering and Technology, 43 (7). pp. 1268-1275.

Patel, M.S. and Liew, M.S. and Mustaffa, Z. and Yee, N.C. and Whyte, A. (2020) Development of downtime cost calculator for offloading operations influenced by parametric rolling. Journal of Marine Science and Engineering, 8 (1).

Patil, N.A. and Zhongyan, N. and Pedapati, S.R. and Mamat, O.B. (2020) Investigation on effect of fly ash volume percentage on microstructure and microhardness of aa7075â��fly ash surface composites via fsp. Lecture Notes in Mechanical Engineering. pp. 399-410.

Patel, M.S. and Liew, M.S. and Mustaffa, Z. and Abdurrasheed, A.S. and Whyte, A. (2020) Influence of Partially Standing Waves on Offloading Operations for Shuttle Tanker. Lecture Notes in Mechanical Engineering. pp. 399-406.

Pangestu, L.A. and Ng, C.Y. and Kajuputra, A.E. and Muzammil, M.K. and Sabtu, S. (2020) Wave-in-Deck Force on Fixed Jacket Platforms by Silhoutte Method and Detailed Component Method. Lecture Notes in Mechanical Engineering. pp. 415-429.

Patel, M.S. and Liew, M.S. and Mustaffa, Z. and Abdurrasheed, A.S. and Whyte, A. (2020) Effects of Motion Responses and Drift Forces on Side-by-Side Offloading Operations of FPSO. Lecture Notes in Mechanical Engineering. pp. 407-413.

Partoon, B. and Sahith, S.J.K. and Lal, B. and Maulud, A.S.B. (2020) Gas Hydrate Models. Green Energy and Technology. pp. 67-85.

Prabu, S. and Samad, N.A. and Ahmad, N.A. and Jumbri, K. and Raoov, M. and Rahim, N.Y. and Samikannu, K. and Mohamad, S. (2020) Studies on the supramolecular complex of a guanosine with beta-cyclodextrin and evaluation of its anti-proliferative activity. Carbohydrate Research, 497.

Phoon, B.L. and Ong, C.C. and Mohamed Saheed, M.S. and Show, P.-L. and Chang, J.-S. and Ling, T.C. and Lam, S.S. and Juan, J.C. (2020) Conventional and emerging technologies for removal of antibiotics from wastewater. Journal of Hazardous Materials, 400.

Pham, L.H.H.P. and Rusli, R. and Shariff, A.M. and Khan, F. (2020) Dispersion of carbon dioxide bubble release from shallow subsea carbon dioxide storage to seawater. Continental Shelf Research, 196.

Pransisco, P and Balbir Singh, MS and Shuaib, M and Shukur, MF and Joseph, E (2020) 3D graphene/fly ash waste material for hybrid supercapacitor electrode: Specific capacitance analysis. Materialwissenschaft und Werkstofftechnik, 51 (6). pp. 713-718.

Q

Qadir, Danial and Nasir, Rizwan and Mukhtar, Hilmi B and Keong, Lau K (2020) Synthesis, characterization, and performance analysis of carbon molecular sieve-embedded polyethersulfone mixed-matrix membranes for the removal of dissolved ions. Water Environment Research, 92 (9). pp. 1306-1324.

Qasim, Ali and Lal, Bhajan and Shariff, Azmi Mohammad and Ismail, Mokhtar Che (2020) Role of Ionic Liquid-Based Multipurpose Gas Hydrate and Corrosion Inhibitors in Gas Transmission Pipeline. Nanotechnology-Based Industrial Applications of Ionic Liquids. pp. 221-244.

Qaiyum, S. and Aziz, I. and Hasan, M.H. and Khan, A.I. and Almalawi, A. (2020) Incremental interval type-2 fuzzy clustering of data streams using single pass method. Sensors (Switzerland), 20 (11). pp. 1-22.

Qing, L. and Bilad, M.R. and Sun, G. and Jaafar, J. and Fane, A.G. (2020) Flow uneven-distribution and its impact on performances of forward osmosis module. Journal of Water Process Engineering, 33.

Qayyum, A. and Ahmad, I. and Mumtaz, W. and Alassafi, M.O. and Alghamdi, R. and Mazher, M. (2020) Automatic segmentation using a hybrid dense network integrated with an 3D-atrous spatial pyramid pooling module for computed tomography (CT) imaging. IEEE Access, 8. pp. 169794-169803.

Qadir, D. and Nasir, R. and Mukhtar, H.B. and Keong, L.K. (2020) Synthesis, characterization, and performance analysis of carbon molecular sieve-embedded polyethersulfone mixed-matrix membranes for the removal of dissolved ions. Water Environment Research, 92 (9). pp. 1306-1324.

Qasim, A. and Lal, B. and Shariff, A.M. and Ismail, M.C. (2020) Role of Ionic Liquid-Based Multipurpose Gas Hydrate and Corrosion Inhibitors in Gas Transmission Pipeline. Nanotechnology in the Life Sciences. pp. 221-244.

Qaiyum, Sana and Aziz, Izzatdin and Hasan, Mohd Hilmi and Khan, Asif Irshad and Almalawi, Abdulmohsen (2020) Incremental interval type-2 fuzzy clustering of data streams using single pass method. Sensors, 20 (11). p. 3210.

R

Reddy, Ambavaram Vijaya Bhaskar and Moniruzzaman, Muhammad and Madhavi, Gajulapalle and Aminabhavi, Tejraj M (2020) Modern approaches in separation, identification and quantification of polychlorinated biphenyls. Current Opinion in Environmental Science & Health, 18. pp. 26-39.

Reddy, A Vijaya Bhaskar and Moniruzzaman, M and Madhavi, V and Jaafar, Jafariah (2020) Recent improvements in the extraction, cleanup and quantification of bioactive flavonoids. Studies in natural products chemistry, 66. pp. 197-223.

Reddy, Ambavaram Vijaya Bhaskar and Moniruzzaman, Muhammad and Bustam, Mohamad A and Goto, Masahiro and Saha, Bidyut B and Janiak, Christoph (2020) Ionic liquid polymer materials with tunable nanopores controlled by surfactant aggregates: A novel approach for CO 2 capture. Journal of Materials Chemistry A, 8 (30). pp. 15034-15041.

Roslan, Rosyiela Azwa and Lau, Woei Jye and Lai, Gwo Sung and Zulhairun, Abdul Karim and Yeong, Yin Fong and Ismail, Ahmad Fauzi and Matsuura, Takeshi (2020) Impacts of multilayer hybrid coating on psf hollow fiber membrane for enhanced gas separation. Membranes, 10 (11). p. 335.

Rahman, Md Tauhidur and Negash, Berihun Mamo and Moniruzzaman, Muhammad and Quainoo, Ato Kwamena and Bavoh, Cornelius B and Padmanabhan, Eswaran (2020) An overview on the potential application of ionic liquids in shale stabilization processes. Journal of Natural Gas Science and Engineering, 81. p. 103480.

Rozuhan, H. and Muhammad, M. and Niazi, U.M. (2020) Probabilistic risk assessment of offshore installation hydrocarbon releases leading to fire and explosion, incorporating system and human reliability analysis. Applied Ocean Research, 101.

Rafiei, Alireza and Loni, Reyhaneh and Mahadzir, Shuhaimi B and Najafi, Gholamhassan and Pavlovic, Sasa and Bellos, Evangelos (2020) Solar desalination system with a focal point concentrator using different nanofluids. Applied Thermal Engineering, 174. p. 115058.

Rao, V.V. and Adi Putra, Z. and Bilad, M.R. and Wirzal, M.D.H. and Nordin, N.A.H.M. (2020) Optimization of lng cold energy utilization via power generation, refrigeration, and air separation. Indonesian Journal of Science and Technology, 5 (3). pp. 321-333.

Rahim, N.A. and Wan Yusoff, W.I. (2020) Reservoir quality and flow unit characterization of a reservoir in X fieid, Baram Delta. Journal of Computational and Theoretical Nanoscience, 17 (2-3). pp. 1447-1459.

Rafiei, A. and Loni, R. and Najafi, G. and Yusaf, T. (2020) Study of PTC system with rectangular cavity receiver with different receiver tube shapes using oil, water and air. Energies, 13 (8).

Rao, T.V.V.L.N. and A Rani, A.M. and Mohamed, N.M. and Ya, H.H. and Awang, M. and M Hashim, F. (2020) Static and stability analysis of partial slip texture multi-lobe journal bearings. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 234 (4). pp. 567-587.

Rubbi, F. and Habib, K. and Tusar, M. and Das, L. and Rahman, Md.T. (2020) Numerical Study of Heat Transfer Enhancement of Turbulent Flow Using Twisted Tape Insert Fitted with Hemispherical Extruded Surface. International Journal of Heat and Technology, 38 (2). pp. 314-320.

Ridwan, T.K. and Hermana, M. and Lubis, L.A. and Riyadi, Z.A. (2020) New avo attributes and their applications for facies and hydrocarbon prediction: A case study from the northern malay basin. Applied Sciences (Switzerland), 10 (21). pp. 1-17.

Rasheed, W. and Tang, T.B. (2020) Anomaly Detection of Moderate Traumatic Brain Injury Using Auto-Regularized Multi-Instance One-Class SVM. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 28 (1). pp. 83-93.

Reksowardojo, I.K. and Arya, R.R. and Budiman, B.A. and Islameka, M. and Santosa, S.P. and Sambegoro, P.L. and Aziz, A.R.A. and Abidin, E.Z.Z. (2020) Energy management system design for good delivery electric trike equipped with different powertrain configurations. World Electric Vehicle Journal, 11 (4). pp. 1-21.

Ramlee, E.B. and Hussain, P.B. and Shaik, N.B. (2020) Enhancing the lifetime and corrosion resistance of gears made of carbon steel Verbesserung der Lebensdauer und KorrosionsbestÃ¤ndigkeit von ZahnrÃ¤dern aus Kohlenstoffstahl. Materialwissenschaft und Werkstofftechnik, 51 (6). pp. 774-779.

Rosli, S.S. and Wong, C.Y. and Yunus, N.M. and Lam, M.K. and Show, P.L. and Cheng, C.K. and Wang, D.K. and Oh, W.D. and Lim, J.W. (2020) Optimum interaction of light intensity and CO2 concentration in bioremediating N-rich real wastewater via assimilation into attached microalgal biomass as the feedstock for biodiesel production. Process Safety and Environmental Protection, 141. pp. 355-365.

Rafiei, A. and Loni, R. and Ahmadi, M.H. and Najafi, G. and Bellos, E. and Rajaee, F. and Askari Asli-Ardeh, E. (2020) Sensitivity analysis of a parabolic trough concentrator with linear V-shape cavity. Energy Science and Engineering, 8 (10). pp. 3544-3560.

Rafiei, A. and Loni, R. and Mahadzir, S.B. and Najafi, G. and Pavlovic, S. and Bellos, E. (2020) Solar desalination system with a focal point concentrator using different nanofluids. Applied Thermal Engineering, 174.

Rashid, M.H. and Farrukh, S. and Javed, S. and Hussain, A. and Fan, X. and Ali, S. and Ayoub, M. (2020) Synthesis and gas permeation analysis of TiO2 nanotube-embedded cellulose acetate mixed matrix membranes. Chemical Papers, 74 (3). pp. 821-828.

Rouhi, J. and Kakooei, S. and Sadeghzadeh, S.M. and Rouhi, O. and Karimzadeh, R. (2020) Highly efficient photocatalytic performance of dye-sensitized K-doped ZnO nanotapers synthesized by a facile one-step electrochemical method for quantitative hydrogen generation. Journal of Solid State Electrochemistry, 24 (7). pp. 1599-1606.

Rashidi, N.A. and Yusup, S. (2020) Recent methodological trends in nitrogenâ��functionalized activated carbon production towards the gravimetric capacitance: A mini review. Journal of Energy Storage, 32.

Ragunathan, T. and Husin, H. and Wood, C.D. (2020) Wax formation mechanisms, wax chemical inhibitors and factors affecting chemical inhibition. Applied Sciences (Switzerland), 10 (2).

Ravi, J. and Othman, M.H.D. and Matsuura, T. and Ro'il Bilad, M. and El-badawy, T.H. and Aziz, F. and Ismail, A.F. and Rahman, M.A. and Jaafar, J. (2020) Polymeric membranes for desalination using membrane distillation: A review. Desalination, 490.

Rusli, R. and Nasif, M.S. (2020) Special Issue: International Conference and Exhibition on Loss Prevention Asia 2019, 25-26 November 2019. Process Safety Progress, 39 (S1).

Ridzuan, A.R.M. and Borompichaichartkul, C. and Haryanto and Aqsha (2020) Preface. IOP Conference Series: Materials Science and Engineering, 771 (1).

Ridwan, Tsara Kamilah and Hermana, Maman and Lubis, Luluan Almanna and Riyadi, Zaky Ahmad (2020) New AVO Attributes and Their Applications for Facies and Hydrocarbon Prediction: A Case Study from the Northern Malay Basin. APPLIED SCIENCES-BASEL, 10 (21).

Rehman, A. and Hassan, M.F.B. (2020) Design specification of context cognitive trust evaluation model for v2v communication in iov. Advances in Intelligent Systems and Computing, 1073. pp. 643-652.

Rodriguez-Aguilar, R. and Marmolejo Saucedo, J.A. and Vasant, P. (2020) Estimation of Electricity Prices in the Mexican Market. Advances in Intelligent Systems and Computing, 1072. pp. 11-17.

Rodriguez-Aguilar, R. and Marmolejo-Saucedo, J.A. and Vasant, P. and Litvinchev, I. (2020) Financial Fraud Detection Through Artificial Intelligence. Lecture Notes on Data Engineering and Communications Technologies, 43. pp. 57-72.

Ramli, R.A. and Zulkifli, M.S. and Rabat, N.E. (2020) Effect of graphite on mechanical, thermal and morphological properties of kenaf recycle polypropylene wood plastic composites. Materials Science Forum, 981 MS. pp. 144-149.

Rosli, S.S. and Amalina Kadir, W.N. and Wong, C.Y. and Han, F.Y. and Lim, J.W. and Lam, M.K. and Yusup, S. and Kiatkittipong, W. and Kiatkittipong, K. and Usman, A. (2020) Insight review of attached microalgae growth focusing on support material packed in photobioreactor for sustainable biodiesel production and wastewater bioremediation. Renewable and Sustainable Energy Reviews, 134.

Raksasat, R. and Lim, J.W. and Kiatkittipong, W. and Kiatkittipong, K. and Ho, Y.C. and Lam, M.K. and Font-Palma, C. and Mohd Zaid, H.F. and Cheng, C.K. (2020) A review of organic waste enrichment for inducing palatability of black soldier fly larvae: Wastes to valuable resources. Environmental Pollution, 267.

Rafiq, W. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Zabri, Z.N.B. and Khan, M.I. and Musarat, M.A. (2020) Investigation on hamburg wheel-tracking device stripping performance properties of recycled hot-mix asphalt mixtures. Materials, 13 (21). pp. 1-15.

Roslan, R.A. and Lau, W.J. and Lai, G.S. and Zulhairun, A.K. and Yeong, Y.F. and Ismail, A.F. and Matsuura, T. (2020) Impacts of multilayer hybrid coating on psf hollow fiber membrane for enhanced gas separation. Membranes, 10 (11). pp. 1-18.

Roslim, A. and Briguglio, A. and Kocsis, L. and Rahman, F.A. and Bahrein, I.F. and Goeting, S. and Razak, H. (2020) Palaeoenvironmental interpretation of late miocene outcrops (Miri and seria formations) along jalan tutong in brunei darussalam. Bulletin of the Geological Society of Malaysia, 70. pp. 39-56.

Raji, Y.O. and Othman, M.H.D. and Nordin, N.A.H.S.M. and Adam, M.R. and Tai, Z.S. and Usman, J. and Ismail, A.F. (2020) Surface matrix functionalization of ceramic-based membrane for oil-water separation: A mini-review. Korean Journal of Chemical Engineering, 37 (10). pp. 1631-1641.

Ridzuan, N.D.M. and Kaus, N.H.M. and Md Lazim, M.A.S. and Kobayashi, T. and Adnan, R. and Othman, M.Z. and Kassim, M.H.M. (2020) Photocatalytic heterostructures-based BiFeO3embedded liquid natural rubber (LNR) for highly removal of cationic dye under direct sunlight. Journal of Environmental Chemical Engineering, 8 (5).

Rubbi, F. and Habib, K. and Saidur, R. and Aslfattahi, N. and Yahya, S.M. and Das, L. (2020) Performance optimization of a hybrid PV/T solar system using Soybean oil/MXene nanofluids as A new class of heat transfer fluids. Solar Energy, 208. pp. 124-138.

Rahman, M.T. and Negash, B.M. and Moniruzzaman, M. and Quainoo, A.K. and Bavoh, C.B. and Padmanabhan, E. (2020) An Overview on the potential application of ionic liquids in shale stabilization processes. Journal of Natural Gas Science and Engineering, 81.

Razak, N.N.A.N. and Rahmawati, R. and Bilad, M.R. and Pratiwi, A.E. and Elma, M. and Nawi, N.I.M. and Jaafar, J. and Lam, M.K. (2020) Finned spacer for enhancing the impact of air bubbles for membrane fouling control in Chlorella vulgaris filtration. Bioresource Technology Reports, 11.

Rehman, M. and Nallagownden, P. and Baharudin, Z. (2020) Design of a new hybrid topology of WPT system to achieve load-independent constant-current and constant-voltage output. Symmetry, 12 (9).

Rashidi, N.A. and Yusup, S. (2020) Biochar as potential precursors for activated carbon production: parametric analysis and multi-response optimization. Environmental Science and Pollution Research, 27 (22). pp. 27480-27490.

Ragunathan, T. and Husin, H. and Wood, C.D. (2020) Effects of Crude Palm Oil and Crude Palm Kernel Oil upon Wax Inhibition. ACS Omega, 5 (31). pp. 19342-19349.

Rashid, T. and Iqbal, D. and Hazafa, A. and Hussain, S. and Sher, F. and Sher, F. (2020) Formulation of zeolite supported nano-metallic catalyst and applications in textile effluent treatment. Journal of Environmental Chemical Engineering, 8 (4).

Reda, M.N. and Spinnler, M. and Al-Kayiem, Hussain H. and Sattelmayer, T. (2020) Analysis of ground thermal control systems for solar photovoltaic performance enhancement. WIT Transactions on Ecology and the Environment, 246. pp. 41-50.

S

Shah, Mansoor Ul Hassan and Moniruzzaman, Muhammad and Reddy, Ambavaram Vijaya Bhaskar and Talukder, Md Mahabubur Rahman and Yusup, Suzana Bt and Goto, Masahiro (2020) An environmentally benign ionic liquid based formulation for enhanced oil spill remediation: Optimization of environmental factors. Journal of Molecular Liquids, 314. p. 113603.

Sulaimon, Aliyu Adebayo and Masri, Asiah Nusaibah and Shahpin, Muhamad Hazri Ahmad and Zailani, Nur Hidayah Zulaikha Othman and Baharuddin, Siti Nurul Ashikin and Moniruzzaman, M and Salleh, Intan Khalida and Saaid, Ismail M (2020) Synthesis of dihydrogen phosphate-based ionic liquids: Experimental and COSMO-RS based investigation for methane hydrate inhibition. Journal of Molecular Liquids, 319. p. 114092.

Shokrollahi, F and Lau, KK and Tay, WH (2020) Performance comparison of ultrasonic-assisted and magnetic stirred absorption methods for CO 2 separation. SN Applied Sciences, 2. pp. 1-10.

Sivapragasam, Magaret and Moniruzzaman, Muhammad and Goto, Masahiro (2020) Outside Front Cover: Biotechnology Journal 4/2020. Biotechnology Journal, 15 (4). p. 2070041.

Sivapragasam, Magaret and Moniruzzaman, Muhammad and Goto, Masahiro (2020) An overview on the toxicological properties of ionic liquids toward microorganisms. Biotechnology journal, 15 (4). p. 1900073.

Suhaimi, Nadia Hartini and Yeong, Yin Fong and Jusoh, Norwahyu and Chew, Thiam Leng and Bustam, Mohamad Azmi and Suleman, Shoaib (2020) Separation of CO2 from CH4 using mixed matrix membranes incorporated with amine functionalized MIL-125 (Ti) nanofiller. Chemical Engineering Research and Design, 159. pp. 236-247.

Samavati, Z. and Samavati, A. and Ismail, A.F. and Yahya, N. and Othman, M.H.D. and Rahman, M.A. (2020) Modified polymer optical fiber sensors for crude oil refractive index monitoring. Journal of Materials Science: Materials in Electronics, 31 (15). pp. 12089-12100.

Sivabalan, Vinayagam and Hassan, Nur Adibah and Qasim, Ali and Lal, Bhajan and Bustam, Mohamad Azmi (2020) Density measurement of aqueous tetraethylammonium bromide and tetraethylammonium iodide solutions at different temperatures and concentrations. South African Journal of Chemical Engineering, 32 (1). pp. 62-67.

Shafiq, Umar and Shariff, Azmi M and Babar, Muhammad and Azeem, Babar and Ali, Abulhassan and Bustam, Azmi (2020) Study of dry ice formation during blowdown of COâ��-CHâ�� from cryogenic distillation column. Journal of Loss Prevention in the Process Industries, 64. p. 104073.

Saqib, Sidra and Rafiq, Sikander and Muhammad, Nawshad and Khan, Asim Laeeq and Mukhtar, Ahmad and Mellon, Nurhayati Binti and Man, Zakaria and Ullah, Sami and Al-Sehemi, Abdullah G and Jamil, Farrukh (2020) Influence of interfacial layer parameters on gas transport properties through modeling approach in MWCNTs based mixed matrix composite membranes. Chemical Engineering Science, 218. p. 115543.

Saqib, Sidra and Rafiq, Sikander and Muhammad, Nawshad and Khan, Asim Laeeq and Mukhtar, Ahmad and Mellon, Nurhayati Binti and Man, Zakaria and Nawaz, Mian Hasnain and Jamil, Farrukh and Ahmad, Nasir M (2020) Perylene based novel mixed matrix membranes with enhanced selective pure and mixed gases (CO2, CH4, and N2) separation. Journal of Natural Gas Science and Engineering, 73. p. 103072.

Sufian, Suriati (2020) Conversion of CO2-CH4 Mixture into Carbon Nanomaterials via Chemical Vapour Deposition. Malaysian Journal of Microscopy, 16 (1).

Sufian, Suriati (2020) Development of the g-C3N4/BiVO4 microflower photocatalyst for photocatalytic degradation of amoxicillin and hydrogen production. Malaysian Journal of Microscopy, 16 (1).

Sufian, Suriati (2020) Enhancement of g-C3N4 via Acid Treatment for the Degradation of Ciprofloxacin Antibiotic. Malaysian Journal of Microscopy, 16 (1).

Samsudin, Mohamad Fakhrul Ridhwan and Bashiri, Robabeh and Mohamed, Norani Muti and Ng, Yun Hau and Sufian, Suriati (2020) Tailoring the morphological structure of BiVO4 photocatalyst for enhanced photoelectrochemical solar hydrogen production from natural lake water. Applied Surface Science, 504. p. 144417.

Samsudin, Mohamad Fakhrul Ridhwan and Ullah, Habib and Bashiri, Robabeh and Mohamed, Norani Muti and Sufian, Suriati and Ng, Yun Hau (2020) Experimental and DFT Insights on Microflower g-Câ��Nâ��/BiVOâ�� Photocatalyst for Enhanced Photoelectrochemical Hydrogen Generation from Lake Water.

Shah, S.M.H. and Mustaffa, Z. and MatÃnez-Gomariz, E. and Yusof, K.W. (2020) Hydrodynamic effect on non-stationary vehicles at varying Froude numbers under subcritical flows on flat roadways. Journal of Flood Risk Management, 13 (4).

Shafiai, S.H. and Gohari, A. and Liu, H. and Siang, C.Y. and Chia, H.Y. (2020) Study on vegetation flow along Kinta River by using LABSWEâ�¢. Alexandria Engineering Journal, 59 (2). pp. 1027-1035.

Shafiq, Umar and Shariff, Azmi M and Babar, Muhammad and Azeem, Babar and Ali, Abulhassan and Bustam, Mohamad Azmi (2020) A review on modeling and simulation of blowdown from pressurized vessels and pipelines. Process Safety and Environmental Protection, 133. pp. 104-123.

Shamsuri, N.A. and Zaine, S.N.A. and Yusof, Y.M. and Yahya, W.Z.N. and Shukur, M.F. (2020) Effect of ammonium thiocyanate on ionic conductivity and thermal properties of polyvinyl alcoholâ��methylcelluloseâ��based polymer electrolytes. Ionics, 26 (12). pp. 6083-6093.

Samavati, Z. and Samavati, A. and Ismail, A.F. and Yahya, N. and Rahman, M.A. and Othman, M.H.D. (2020) Effect of acetone/methanol ratio as a hybrid solvent on fabrication of polymethylmethacrylate optical fiber sensor. Optics and Laser Technology, 123.

Subramanian, K. and Othman, M.B. and Sokkalingam, R. and Thangarasu, G. (2020) A new approach for forecast sales growth in automobile industry. International Journal of Scientific and Technology Research, 9 (1). pp. 2872-2875.

Shah, SZH and Choudhry, RS and Mahadzir, Shuhaimi (2020) A new approach for strength and stiffness prediction of discontinuous fibre reinforced composites (DFC). Composites Part B: Engineering, 183. p. 107676.

Suleman, Humbul and Maulud, Abdulhalim Shah and Syalsabila, Afaf and Shahid, Muhammad Zubair (2020) The contribution of aqueous l-arginine salts to equilibrium carbon dioxide absorption in a co-promoter role at high pressure. Fluid Phase Equilibria, 524. p. 112743.

Sivabalan, Vinayagam and Hasnor, Nurasyikin and Lal, Bhajan and Kassim, Zamzila and Shah Maulud, Abdulhalim (2020) Tetraethylammonium acetate and tetraethylammonium bromide-based deep eutectic solvents as thermodynamic CO2 gas hydrate inhibitors. Applied Sciences, 10 (19). p. 6794.

Suleman, Humbul and Maulud, Abdulhalim Shah and Syalsabila, Afaf and Shahid, Muhammad Zubair and Fosbøl, Philip Loldrup (2020) High-pressure experimental and theoretical study of CO2 solubility in aqueous blends of lysine salts with piperazine as new absorbents. Fluid Phase Equilibria, 507. p. 112429.

Shafeer, A. and Hyun, L.J. and Ganat, T. and Habte, A.D. (2020) Interpretation of two-phase oil-water injectivity and falloff testing in a vertical injection well using laplace-transform finite-difference method. International Journal of Advanced Science and Technology, 29 (1). pp. 69-88.

Shafiq, U. and Shariff, A.M. and Babar, M. and Azeem, B. and Ali, A. and Bustam, A. (2020) Study of dry ice formation during blowdown of COâ��-CHâ�� from cryogenic distillation column. Journal of Loss Prevention in the Process Industries, 64.

Sahith, S.J.K. and Pedapati, S.R. and Lal, B. (2020) Investigation on gas hydrates formation and dissociation in multiphase gas dominant transmission pipelines. Applied Sciences (Switzerland), 10 (15).

Sajid, Z. and Ismail, M.S. and Hanif, T. and Tsegab, H. and Ali, S. and Ahmed, N. (2020) Sedimentary Characteristics, Xrd, Ftir, Uv-Vis And Rock-Eval Pyrolysis of Black Shale Intervals of the Semantan Formation, Peninsular Malaysia. ARPN Journal of Engineering and Applied Sciences, 15 (23). pp. 2778-2792.

Soomro, I.A. and Pedapati, S.R. (2020) Effect of multi pulse current treatment on microstructure and microhardness of resistance spot welded dual phase steel DP590 Auswirkung der Mehrfachimpulsstrombehandlung auf das GefÃ¼ge und die MikrohÃ¤rte des widerstandspunktgeschweiÃ�ten Dualphasenstahls DP 590. Materialwissenschaft und Werkstofftechnik, 51 (6). pp. 699-705.

Shokrollahi, F. and Lau, K.K. and Tay, W.H. (2020) Performance comparison of ultrasonic-assisted and magnetic stirred absorption methods for CO2 separation. SN Applied Sciences, 2 (7).

Sajid, Muhammad and Ayoub, Muhammad and Yusup, Suzana and Abdullah, Bawadi and Shamsuddin, Rashid and Bilad, Roil and Chong, Chi Cheng and Aqsha, Aqsha (2020) Short-chain polyglycerol production via microwave-assisted solventless glycerol polymerization process over lioh-modified aluminium pillared clay catalyst: Parametric study. Processes, 8 (9). p. 1093.

Shafiqah, Mohd-Nasir Nor and Tran, Hai Nguyen and Nguyen, Trinh Duy and Phuong, Pham TT and Abdullah, Bawadi and Lam, Su Shiung and Nguyen-Tri, Phuong and Kumar, Ravinder and Nanda, Sonil and Vo, Dai-Viet N (2020) Ethanol CO2 reforming on La2O3 and CeO2-promoted Cu/Al2O3 catalysts for enhanced hydrogen production. International Journal of Hydrogen Energy, 45 (36). pp. 18398-18410.

Sabet, M. and Soleimani, H. and Hosseini, S. (2020) Thermal stability and flame-retardant characteristic of irradiated LDPE and composites. Bulletin of Materials Science, 43 (1).

Singh, Haswin Kaur Gurdeep and Yusup, Suzana and Quitain, Armando T and Abdullah, Bawadi and Ameen, Mariam and Sasaki, Mitsuru and Kida, Tetsuya and Cheah, Kin Wai (2020) Biogasoline production from linoleic acid via catalytic cracking over nickel and copper-doped ZSM-5 catalysts. Environmental research, 186. p. 109616.

SAJID, Muhammad and AYOUB, Muhammad and UEMURA, Yoshimitsu and YUSUP, Suzana and ABDULLAH, Bawadi B and ULLAH, Sami and AQSHA, Aqsha (2020) Catalytic Activity of Intercalated Montmorillonite Clay for Glycerol Conversion to Oligomers via Microwave Irradiation. Journal of the Japan Institute of Energy, 99 (1). pp. 16-19.

Shafiai, S.H. and Sabri, F.N. and Gohari, A. and Liu, H. and Wei, Y.J. (2020) Lattice Boltzmann method application on headwater at Lata Kinjang Waterfall, Malaysia. International Journal of Engineering, Transactions B: Applications, 33 (5). pp. 760-769.

Samsuri, S. and Li, T.H. and Ruslan, M.S.H. and Amran, N.A. (2020) Antioxidant recovery from pomegranate peel waste by integrating maceration and freeze concentration technology. International Journal of Food Engineering, 16 (10).

Sakuragi, M. and Yano, R. and Hasnol, S.B.M. and Kusakabe, K. (2020) Evaluation of microemulsions containing a large amount of a deep eutectic solvent as a potential transdermal carrier of resveratrol. Japanese Journal of Applied Physics, 59 (9).

Supian, A.B.M. and Sapuan, S.M. and Zuhri, M.Y.M. and Zainudin, E.S. and Ya, H.H. (2020) Crashworthiness performance of hybrid kenaf/glass fiber reinforced epoxy tube on winding orientation effect under quasi-static compression load. Defence Technology, 16 (5). pp. 1051-1061.

Shah, S.Z.H. and Choudhry, R.S. and Mahadzir, S. (2020) A new approach for strength and stiffness prediction of discontinuous fibre reinforced composites (DFC). Composites Part B: Engineering, 183.

Sheikh, N.A. and Chuan Ching, D.L. and Khan, I. and Sakidin, H.B. (2020) Generalization of the Convective Flow of Brinkman-Type Fluid Using Fourier's and Fick's Laws: Exact Solutions and Entropy Generation. Mathematical Problems in Engineering, 2020.

Sarang, S. and StojanoviÄ�, G.M. and Stankovski, S. and Trpovski, Å½. and Drieberg, M. (2020) Energy-Efficient Asynchronous QoS MAC Protocol for Wireless Sensor Networks. Wireless Communications and Mobile Computing, 2020.

Shaik, N.B. and Pedapati, S.R. and Abd Dzubir, F.A. (2020) Remaining useful life prediction of crude oil pipeline by means of deterioration curves. Process Safety Progress, 39 (S1).

Samsuri, S. and Jian, N.L. and Jusoh, F.W. and HernÃ¡ndez YÃ¡Ã±ez, E. and Yahya, N.Y. (2020) Solvent-Aided Crystallization for Biodiesel Purification. Chemical Engineering and Technology, 43 (3). pp. 447-456.

Sureshkumar, N. and Bhat, S. and Srinivasan, S. and Gnanasundaram, N. and Thanapalan, M. and Krishnamoorthy, R. and Abuhimd, H. and Ahmed, F. and Show, P.L. (2020) Continuous phenol removal using a liquidâ��solid circulating fluidized bed. Energies, 13 (15).

Sebastian, P. and Vooi Voon, Y. and Comley, R. (2020) Parametric Tracking Across Multiple Cameras with Spatial Estimation. IETE Journal of Research.

Sharon, H. and Elamvazuthi, I. and Lu, C.-K. and Parasuraman, S. and Natarajan, E. (2020) Development of rheumatoid arthritis classification from electronic image sensor using ensemble method. Sensors (Switzerland), 20 (1).

Suresh, K. and Jeoti, V. and Soeung, S. and Drieberg, M. and Goh, M. and Aslam, M.Z. (2020) A Comparative Survey on Silicon Based and Surface Acoustic Wave (SAW)-Based RFID Tags: Potentials, Challenges, and Future Directions. IEEE Access, 8. pp. 91624-91647.

Sarkar, M.R. and Julai, S. and Tong, C.W. and Uddin, M. and Romlie, M.F. and Shafiullah, G.M. (2020) Hybrid pitch angle controller approaches for stable wind turbine power under variablewind speed. Energies, 13 (14).

Saggu, M.H. and Sheikh, N.A. and Niazi, U.M. and Irfan, M. and Glowacz, A. and Legutko, S. (2020) Improved analysis on the fin reliability of a plate fin heat exchanger for usage in lng applications. Energies, 13 (14).

Sazhin, S.S. and Bar-Kohany, T. and Nissar, Z. and Antonov, D. and Strizhak, P.A. and Rybdylova, O.D. (2020) A new approach to modelling micro-explosions in composite droplets. International Journal of Heat and Mass Transfer, 161.

Sheikh, N.A. and Ching, D.L.C. and Khan, I. and Kumar, D. and Nisar, K.S. (2020) A new model of fractional Casson fluid based on generalized Fick's and Fourier's laws together with heat and mass transfer. Alexandria Engineering Journal, 59 (5). pp. 2865-2876.

Sakai, H. and Nakata, M. and Watada, J. (2020) NIS-Apriori-based rule generation with three-way decisions and its application system in SQL. Information Sciences, 507. pp. 755-771.

Subramanian, K. and Othman, M. and Sokkalingam, R. and Thangarasu, G. and Kayalvizhi, S. (2020) An Integrated Model for Forecasting Indian Automobile. International Journal on Advanced Science, Engineering and Information Technology, 10 (6). pp. 2593-2598.

Sabet, M. and Soleimani, H. and Mohammadian, E. and Hosseini, S. (2020) The effect of graphene oxide on flame retardancy of polypropylene and polystyrene. Materials Performance and Characterization, 9 (1). pp. 284-292.

Saqib, S. and Rafiq, S. and Muhammad, N. and Khan, A.L. and Mukhtar, A. and Mellon, N.B. and Man, Z. and Ullah, S. and Al-Sehemi, A.G. and Jamil, F. (2020) Influence of interfacial layer parameters on gas transport properties through modeling approach in MWCNTs based mixed matrix composite membranes. Chemical Engineering Science, 218.

Singh, N. and Elamvazuthi, I. and Nallagownden, P. and Ramasamy, G. and Jangra, A. (2020) Routing based multi-agent system for network reliability in the smart microgrid. Sensors (Switzerland), 20 (10).

Saeidi, T. and Ismail, I. and Mahmood, S.N. and Alani, S. and Alhawari, A.R.H. (2020) Microwave Imaging of Voids in Oil Palm Trunk Applying UWB Antenna and Robust Time-Reversal Algorithm. Journal of Sensors, 2020.

Saggu, M.H. and Sheikh, N.A. and Niazi, U.M. and Irfan, M. and Glowacz, A. (2020) Predicting the structural reliability of LNG processing plate-fin heat exchanger for energy conservation. Energies, 13 (9).

Shabani, A. and Zivar, D. and Jahangiri, H.R. and Shahrabadi, A. (2020) Application of pore network modeling in deep bed filtration analysis. SN Applied Sciences, 2 (9).

Sivabalan, V. and Hasnor, N. and Lal, B. and Kassim, Z. and Maulud, A.S. (2020) Tetraethylammoniumacetate and tetraethylammonium bromide-based deep eutectic solvents as thermodynamic CO2 gas hydrate inhibitors. Applied Sciences (Switzerland), 10 (19).

Shafiq, U. and Shariff, A.M. and Babar, M. and Azeem, B. and Ali, A. and Bustam, M.A. (2020) A review on modeling and simulation of blowdown from pressurized vessels and pipelines. Process Safety and Environmental Protection, 133. pp. 104-123.

Shahrestani, Shohreh and Ismail, Mokhtar Che and Kakooei, Saeid and Beheshti, Mohammadali (2020) Effect of additives on slip casting rheology, microstructure and mechanical properties of Si3N4/SiC composites. CERAMICS INTERNATIONAL, 46 (5). pp. 6182-6190.

Sajid, Z. and Karuppanan, S. and Shah, S.Z.H. (2020) Open-hole and filled-hole failure envelopes of bfrp and gfrp: A comparative study. Lecture Notes in Mechanical Engineering. pp. 391-398.

Shayuti, M.S.M. and Sharudin, R.W. and Mohd, T.A.T. and Khamaruddin, P.N.F.M. and Abdullah, M.Z. and Yusoff, P.S.M.M. (2020) Thermal conductivity and crystallography of polypropylene/ polycarbonate/ polypropylene-graft-maleic anhydride polymer blend. Materials Science Forum, 995 MS. pp. 56-62.

Saafie, N. and Samsudin, M.R. and Sufian, S. (2020) Optimization of methylene blue adsorption via functionalized activated carbon using response surface methodology with central composite design. Key Engineering Materials, 841 KE. pp. 220-224.

Sharma, K.V. and Kumar Vandrangi, S. and Snoussi, L. and Raja Sekhar, Y. and Sadeghzadeh, M. and Ahmadi, M.H. (2020) Influence of nanofluid properties on turbulent forced convection heat transfer in different base liquids. Mathematical Methods in the Applied Sciences.

Salim, D.A. and Majid, M.A.A. and Nordin, A. (2020) A Study of a Heat Exchanger Sizing of a Gas Turbine Inlet Air Cooling for Power Enhancement. Lecture Notes in Mechanical Engineering. pp. 361-368.

Shafiq, U. and Shariff, A.M. and Babar, M. and Azeem, B. and Ali, A. and Bustam, A. (2020) Study of CO2 Solid Formation During Blowdown of Cryogenic CO2â��CH4 Distillation Process. Lecture Notes in Mechanical Engineering. pp. 23-31.

Sinitsyn, S. and Panchenko, V. and Kharchenko, V. and Vasant, P. (2020) Optimization of Parquetting of the Concentrator of Photovoltaic Thermal Module. Advances in Intelligent Systems and Computing, 1072. pp. 160-169.

Sinitsyn, S. and Panchenko, V. and Kharchenko, V. and Kovalev, A. and Vasant, P. (2020) The Concept of Information Modeling in Interactive Intelligence Systems. Advances in Intelligent Systems and Computing, 1072. pp. 249-259.

Saeidi, T. and Mahmood, S.N. and Ali, S.M. and Alani, S. and Rehman, M. and Alhawari, A.R.H. (2020) Equivalent Circuit (EC) Approximation of Miniaturized Elliptical UWB Antenna for Imaging of Wood. Lecture Notes in Networks and Systems, 118. pp. 447-455.

Sabet, M. and Soleimani, H. and Mohammadian, E. and Hosseini, S. (2020) Impact of inclusion of graphene oxide nanosheets on polypropylene thermal characteristics. Iranian Polymer Journal (English Edition), 29 (12). pp. 1099-1112.

Sayani, J.K.S. and Pedapati, S.R. and Lal, B. (2020) Phase behavior study on gas hydrates formation in gas dominant multiphase pipelines with crude oil and high CO2 mixed gas. Scientific Reports, 10 (1).

Sulaimon, A.A. and Masri, A.N. and Ahmad Shahpin, M.H. and Othman Zailani, N.H.Z. and Baharuddin, S.N.A. and Moniruzzaman, M. and Salleh, I.K. and Saaid, I.M. (2020) Synthesis of dihydrogen phosphate-based ionic liquids: Experimental and COSMO-RS based investigation for methane hydrate inhibition. Journal of Molecular Liquids, 319.

Sazali, N. and Salleh, W.N.W. and Ismail, A.F. and Ismail, N.H. and Mohamed, M.A. and Nordin, N.A.H.M. and Sokri, M.N.M.M. and Iwamoto, Y. and Honda, S. (2020) Retraction notice to â��Enhanced gas separation performance using carbon membranes containing nanocrystalline cellulose and BTDA-TDI/MDI polyimideâ�� Chem. Eng. Res. Des. 140 (2018) 221â��228 (Chemical Engineering Research and Design (2018) 140 (221â��228), (S0263876218305173), (10.1016/j.cherd.2018.09.039)). Chemical Engineering Research and Design, 163. p. 262.

Syed, M.M. and Lemma, T.A. and Vandrangi, S.K. and Ofei, T.N. (2020) Recent developments in model-based fault detection and diagnostics of gas pipelines under transient conditions. Journal of Natural Gas Science and Engineering, 83.

Sanusi, F.A. and Johl, S.K. (2020) A proposed framework for assessing the influence of internal corporate social responsibility belief on employee intention to job continuity. Corporate Social Responsibility and Environmental Management, 27 (6). pp. 2437-2449.

Suzaimi, N.D. and Goh, P.S. and Ismail, A.F. and Mamah, S.C. and Malek, N.A.N.N. and Lim, J.W. and Wong, K.C. and Hilal, N. (2020) Strategies in forward osmosis membrane substrate fabrication and modification: A review. Membranes, 10 (11). pp. 1-42.

Shaikh, T.A. and Hussain, S.S. and Tanweer, M.R. and Hashmani, M.A. (2020) Broadening selection competitive constraint handling algorithm for faster convergence. Journal of Information Science and Engineering, 36 (6). pp. 1293-1314.

Shamshirgaran, S.R. and Al-Kayiem, H.H. and Sharma, K.V. and Ghasemi, M. (2020) State of the art of techno-economics of nanofluid-laden flat-plate solar collectors for sustainable accomplishment. Sustainability (Switzerland), 12 (21). pp. 1-42.

Shah, S.M.H. and Mustaffa, Z. and Teo, F.Y. and Imam, M.A.H. and Yusof, K.W. and Al-Qadami, E.H.H. (2020) A review of the flood hazard and risk management in the South Asian Region, particularly Pakistan. Scientific African, 10.

Subramani, I.G. and Perumal, V. and Gopinath, S.C.B. and Mohamed, N.M. and Joshi, N. and Ovinis, M. and Sze, L.L. (2020) 3D nanoporous hybrid nanoflower for enhanced non-faradaic redox-free electrochemical impedimetric biodetermination. Journal of the Taiwan Institute of Chemical Engineers, 116. pp. 26-35.

Shahbazi, A. and Monfared, M.S. and Thiruchelvam, V. and Ka Fei, T. and Babasafari, A.A. (2020) Integration of knowledge-based seismic inversion and sedimentological investigations for heterogeneous reservoir. Journal of Asian Earth Sciences, 202.

Seng, L.Y. and Al-Shaikh, M. and Hascakir, B. (2020) Intermolecular interaction between heavy crude oils and surfactants during surfactant-steam flooding process. ACS Omega, 5 (42). pp. 27383-27392.

Semail, N.-F. and Abdul Keyon, A.S. and Saad, B. and Noordin, S.S. and Nik Mohamed Kamal, N.N.S. and Mohamad Zain, N.N. and Azizi, J. and Kamaruzaman, S. and Yahaya, N. (2020) Analytical method development and validation of anticancer agent, 5-fluorouracil, and its metabolites in biological matrices: An updated review. Journal of Liquid Chromatography and Related Technologies, 43 (15-16). pp. 562-579.

Shafiai, S.H. and Gohari, A. (2020) Conventional and electrical EOR review: the development trend of ultrasonic application in EOR. Journal of Petroleum Exploration and Production Technology, 10 (7). pp. 2923-2945.

Sajid, Z. and Ismail, M.S. and Zakariah, M.N.A. and Tsegab, H. and Vintaned, J.A.G. and Hanif, T. and Ahmed, N. (2020) Impact of paleosalinity, paleoredox, paleoproductivity/preservation on the organic matter enrichment in black shales from triassic turbidites of semanggol basin, peninsular malaysia. Minerals, 10 (10). pp. 1-34.

Siyal, A.A. and Shamsuddin, R. and Low, A. and Hidayat, A. (2020) Adsorption Kinetics, Isotherms, and Thermodynamics of Removal of Anionic Surfactant from Aqueous Solution Using Fly Ash. Water, Air, and Soil Pollution, 231 (10).

Shabbir, M.F. and Xin, Y. and Hafeez, S. (2020) Corporate Governance and Firm Efficiency: An Application of Internet Companies of China. Emerging Markets Finance and Trade, 56 (12). pp. 2874-2890.

Samsudin, M.F.R. and Sufian, S. (2020) Hybrid 2D/3D g-C3N4/BiVO4 photocatalyst decorated with RGO for boosted photoelectrocatalytic hydrogen production from natural lake water and photocatalytic degradation of antibiotics. Journal of Molecular Liquids, 314.

Shah, M.U.H. and Moniruzzaman, M. and Reddy, A.V.B. and Talukder, M.M.R. and Yusup, S.B. and Goto, M. (2020) An environmentally benign ionic liquid based formulation for enhanced oil spill remediation: Optimization of environmental factors. Journal of Molecular Liquids, 314.

Samsudin, M.F.R. and Frebillot, C. and Kaddoury, Y. and Sufian, S. and Ong, W.-J. (2020) Bifunctional Z-Scheme Ag/AgVO3/g-C3N4 photocatalysts for expired ciprofloxacin degradation and hydrogen production from natural rainwater without using scavengers. Journal of Environmental Management, 270.

Sajid, M. and Ayoub, M. and Yusup, S. and Abdullah, B. and Shamsuddin, R. and Bilad, R. and Chong, C.C. and Aqsha, A. (2020) Short-chain polyglycerol production via microwave-assisted solventless glycerol polymerization process over lioh-modified aluminium pillared clay catalyst: Parametric study. Processes, 8 (9).

Shabani, A. and Zivar, D. and Jahangiri, H.R. and Shahrabadi, A. (2020) Application of pore network modeling in deep bed filtration analysis. SN Applied Sciences, 2 (9).

Suzaimi, N.D. and Goh, P.S. and Malek, N.A.N.N. and Lim, J.W. and Ismail, A.F. (2020) Enhancing the performance of porous rice husk silica through branched polyethyleneimine grafting for phosphate adsorption. Arabian Journal of Chemistry, 13 (8). pp. 6682-6695.

Shahid, M.U. and Mohamed, N.M. and Muhsan, A.S. and Zaine, S.N.A. and Bashiri, R. and Khatani, M. and Samsudin, A.E. (2020) Solvent exfoliated graphene incorporated mixed phase TiO2 transparent photoelectrode for the efficient and color transparent dye-sensitized solar cell. Solar Energy, 206. pp. 317-329.

Sambo, C. and Iferobia, C.C. and Babasafari, A.A. and Rezaei, S. and Akanni, O.A. (2020) The Role of Time Lapse(4D) Seismic Technology as Reservoir Monitoring and Surveillance Tool: A Comprehensive Review. Journal of Natural Gas Science and Engineering, 80.

Shabani, A. and Moosavi, M.S. and Zivar, D. and Jahangiri, H.R. (2020) Data-driven technique for analyzing the injector efficiency in a waterflooding operation. Simulation, 96 (8). pp. 701-710.

Saad, M.S. and Balasubramaniam, L. and Wirzal, M.D.H. and Halim, N.S.A. and Bilad, M.R. and Nordin, N.A.H.M. and Putra, Z.A. and Ramli, F.N. (2020) Integrated membraneâ��electrocoagulation system for removal of celestine blue dyes in wastewater. Membranes, 10 (8). pp. 1-12.

Saeed, A.A.H. and Harun, N.Y. and Zulfani, N. (2020) Heavy metals capture from water sludge by kenaf fibre activated carbon in batch adsorption. Journal of Ecological Engineering, 21 (6). pp. 102-115.

Siswanto, H. and Supriyanto, B. and Pranoto and Sutanto, M.H. (2020) Constructing a strategy to improve indonesian regency road performance using balanced scorecard. International Journal of GEOMATE, 18 (69). pp. 248-253.

Shahbaz, M. and Al-Ansari, T. and Inayat, M. and Sulaiman, S.A. and Parthasarathy, P. and McKay, G. (2020) A critical review on the influence of process parameters in catalytic co-gasification: Current performance and challenges for a future prospectus. Renewable and Sustainable Energy Reviews, 134.

Sivapragasam, M. and Moniruzzaman, M. and Goto, M. (2020) An Overview on the Toxicological Properties of Ionic Liquids toward Microorganisms. Biotechnology Journal, 15 (4).

Sivapragasam, M. and Wilfred, C.D. (2020) Biological Applications of Ionic Liquids-Based Surfactants: A Review of the Current Scenario. Nanotechnology in the Life Sciences. pp. 137-152.

Saeed, A.A.H. and Harun, N.Y. and Sufian, S. and Siyal, A.A. and Zulfiqar, M. and Bilad, M.R. and Vagananthan, A. and Al-Fakih, A. and Ghaleb, A.A.S. and Almahbashi, N. (2020) Eucheuma cottonii seaweed-based biochar for adsorption of methylene blue dye. Sustainability (Switzerland), 12 (24). pp. 1-15.

Siyal, A.A. and Shamsuddin, M.R. and Low, A. and Rabat, N.E. (2020) A review on recent developments in the adsorption of surfactants from wastewater. Journal of Environmental Management, 254.

Saqib, S. and Rafiq, S. and Muhammad, N. and Khan, A.L. and Mukhtar, A. and Mellon, N.B. and Man, Z. and Nawaz, M.H. and Jamil, F. and Ahmad, N.M. (2020) Perylene based novel mixed matrix membranes with enhanced selective pure and mixed gases (CO2, CH4, and N2) separation. Journal of Natural Gas Science and Engineering, 73.

Sheikh, N.A. and Ching, D.L.C. and Khan, I. and Ahmad, A. and Ammad, S. (2020) Concrete based jeffrey nanofluid containing zinc oxide nanostructures: Application in cement industry. Symmetry, 12 (6).

Saad, B. and Basheer, C. (2020) Chapter 12: Sample Preparation Methods for the Analysis of Biogenic Amines. Food Chemistry, Function and Analysis, 2020-J (20). pp. 212-238.

Soleimani, H. and Ali, H. and Yahya, N. and Guan, B.H. and Sabet, M. and Lee, K.C. and Dehzangi, A. and Kakooei, S. (2020) Transport modelling of multi-phase fluid flow in porous media for enhanced oil recovery. Defect and Diffusion Forum, 400. pp. 38-44.

Salehuddin, Nurliana Farhana and Mansor, Nurlidia and Yahya, Wan Zaireen Nisa and Noor Affendi, Nur Mahfuzah and Manogaran, M Devendran (2020) Degradation of allicin as urease inhibitor affected by soil conditions and its effect on kinetic properties of soil urease. Communications in Soil Science and Plant Analysis, 51 (1). pp. 98-106.

T

Toloue, I. and Liew, M.S. and Hamonangan Harahap, I.S. and Lee, H.E. (2020) Damage detection in frame structures using noisy accelerometers and Damage Load Vectors (DLV). Scientia Iranica, 27 (4 A). pp. 1776-1785.

Toh, Moau Jian and Oh, Pei Ching and Chew, Thiam Leng and Ahmad, Abdul Latif (2020) Preparation of polydimethylsiloxane-SiO2/PVDF-HFP mixed matrix membrane of enhanced wetting resistance for membrane gas absorption. Separation and Purification Technology, 244. p. 116543.

Tan, LS and Shariff, AM and Tay, WH and Lau, KK and Tsuji, T and Hairul, NAH (2020) Impact of N-Methyl-2-Pyrrolidone in Monoethanolamine Solution to the CO. Sains Malaysiana, 49 (11). pp. 2625-2635.

Tayeh, B.A. and Salem, T.J. and Aisheh, Y.I.A. and Alaloul, W.S. (2020) Risk factors affecting the performance of construction projects in gaza strip. Open Civil Engineering Journal, 14 (1). pp. 94-104.

Taqvi, Syed A and Tufa, Lemma Dendana and Zabiri, Haslinda and Maulud, Abdulhalim Shah and Uddin, Fahim (2020) Fault detection in distillation column using NARX neural network. Neural Computing and Applications, 32. pp. 3503-3519.

Taqvi, Syed Ali Ammar and Zabiri, Haslinda and Tufa, Lemma Dendena and Uddin, Fahim and Fatima, Syeda Anmol and Maulud, Abdulhalim Shah (2020) Narx network based data-driven algorithm for detection of tray faults in nonlinear dynamic distillation column. Jurnal Teknologi, 82 (5). pp. 43-50.

Taqvi, S.A.A. and Zabiri, H. and Tufa, L.D. and Uddin, F. and Fatima, S.A. and Maulud, A.S. (2020) Narx network based data-driven algorithm for detection of tray faults in nonlinear dynamic distillation column. Jurnal Teknologi, 82 (5). pp. 43-50.

Tran, T.T. and Truong, K.H. and Vo, D.N. (2020) Stochastic fractal search algorithm for reconfiguration of distribution networks with distributed generations. Ain Shams Engineering Journal, 11 (2). pp. 389-407.

Temitope Yekeen, S. and Balogun, A.L. and Wan Yusof, K.B. (2020) A novel deep learning instance segmentation model for automated marine oil spill detection. ISPRS Journal of Photogrammetry and Remote Sensing, 167. pp. 190-200.

Toloue, I. and Liew, M.S. and Harahap, I.S.H. and Lee, H.E. (2020) Experimental evaluation of force analogy method (FAM) by element type. Earthquake Engineering and Engineering Vibration, 19 (1). pp. 137-147.

Tran, D.C. and Nguyen, D.L. and Hassan, M.F. (2020) Development and testing of an fpt.Ai-based voicebot. Bulletin of Electrical Engineering and Informatics, 9 (6). pp. 2388-2395.

Tahoon, A.I. and Rusli, R. and Khan, F. and Zainal Abidin, M. (2020) Logic-based probabilistic network model to detect and track faults in a process system. Process Safety Progress, 39 (S1).

Tan, P.H. and Fong, K.S. and Mohd Yassin, A.Y. and Latheef, M. (2020) A numerical study on the effect of magnetic heating to crude oil-nanofluid flow for enhanced oil recovery. Jurnal Teknologi, 82 (2). pp. 23-34.

Tan, C.H. and Show, P.L. and Lam, M.K. and Fu, X. and Ling, T.C. and Chen, C.-Y. and Chang, J.-S. (2020) Examination of indigenous microalgal species for maximal protein synthesis. Biochemical Engineering Journal, 154.

Topa, A. and Cerik, B.C. and Kim, D.K. (2020) A useful manufacturing guide for rotary piercing seamless pipe by ALE method. Journal of Marine Science and Engineering, 8 (10). pp. 1-24.

Tamalmani, K. and Husin, H. (2020) Review on corrosion inhibitors for oil and gas corrosion issues. Applied Sciences (Switzerland), 10 (10).

Thavaravej, C. and Leejeerajumnean, A. and Tagawa, T. and Wang, Q. and Tsutsumi, H. and Assabumrungrat, S. and Quitain, A.T. and Shaharun, M.S. and Krongsut, S. and Kiatkittipong, W. (2020) Preface and Welcome Speech (ICEIT 2020). IOP Conference Series: Materials Science and Engineering, 965 (1).

Thawaba, A.A. and Ramli, A.A. and Fudzee, M.F.M. and Wadata, J. (2020) A Mechanism to Support Agile Frameworks Enhancing Reliability Assessment for SCS Development: A Case Study of Medical Surgery Departments. Advances in Intelligent Systems and Computing, 978 AI. pp. 66-76.

Tella, A. and Balogun, A.-L. (2020) Ensemble fuzzy MCDM for spatial assessment of flood susceptibility in Ibadan, Nigeria. Natural Hazards, 104 (3). pp. 2277-2306.

Tan, L.S. and Shariff, A.M. and Tay, W.H. and Lau, K.K. and Tsuji, T. and Hairul, N.A.H. (2020) Impact of N-methyl-2-pyrrolidone in monoethanolamine solution to the CO2 absorption in packed column: Analysis via mathematical modeling Kesan N-metil-2-pirolidon dalam larutan monoetanolamina pada penyerapan CO2 dalam kolum pek: Analisis melalui pemodelan matematik. Sains Malaysiana, 49 (11). pp. 2625-2635.

Tackie-Otoo, B.N. and Ayoub Mohammed, M.A. (2020) Experimental investigation of the behaviour of a novel amino acid-based surfactant relevant to EOR application. Journal of Molecular Liquids, 316.

Templeton, J.D. and Ghoreishi-Madiseh, S.A. and Hassani, F.P. and Sasmito, A.P. and Kurnia, J.C. (2020) Numerical and experimental study of transient conjugate heat transfer in helical closed-loop geothermal heat exchangers for application of thermal energy storage in backfilled mine stopes. International Journal of Energy Research, 44 (12). pp. 9609-9616.

Topa, A. and Cerik, B.C. and Kim, D.K. (2020) A useful manufacturing guide for rotary piercing seamless pipe by ALE method. Journal of Marine Science and Engineering, 8 (10). pp. 1-24.

Talip, R.A.A. and Yahya, W.Z.N. and Bustam, M.A. (2020) Ionic liquids roles and perspectives in electrolyte for dye-sensitized solar cells. Sustainability (Switzerland), 12 (18).

Takeshita, A. and Uemura, Y. and Onoe, K. (2020) Quantification of persistent free radicals (PFRs) formed in thermally decomposed cellulose and its correlation with residual carbon amount. Journal of Analytical and Applied Pyrolysis, 150.

Toha, M.A. and Johl, S.K. and Khan, P.A. (2020) Firm's sustainability and societal development from the lens of fishbone eco-innovation: A moderating role of ISO 14001-2015 environmental management system. Processes, 8 (9).

Tran, D.C. and Ibrahim, R. and Bingi, K. (2020) Batteryâ��s Life-Time Estimation of Industrial WirelessHART Sensor Actuator Node. Arabian Journal for Science and Engineering, 45 (8). pp. 6287-6295.

Toh, M.J. and Oh, P.C. and Chew, T.L. and Ahmad, A.L. (2020) Preparation of polydimethylsiloxane-SiO2/PVDF-HFP mixed matrix membrane of enhanced wetting resistance for membrane gas absorption. Separation and Purification Technology, 244.

Tanoue, K.-I. and Hikasa, K. and Hamaoka, Y. and Yoshinaga, A. and Nishimura, T. and Uemura, Y. and Hideno, A. (2020) Heat and mass transfer during lignocellulosic biomass torrefaction: Contributions from the major components-cellulose, hemicellulose, and lignin. Processes, 8 (8).

Tan, I.S. and Lam, M.K. and Foo, H.C.Y. and Lim, S. and Lee, K.T. (2020) Advances of macroalgae biomass for the third generation of bioethanol production. Chinese Journal of Chemical Engineering, 28 (2). pp. 502-517.

Taghizadeh, S.-M. and Berenjian, A. and Chew, K.W. and Show, P.L. and Mohd Zaid, H.F. and Ramezani, H. and Ghasemi, Y. and Raee, M.J. and Ebrahiminezhad, A. (2020) Impact of magnetic immobilization on the cell physiology of green unicellular algae Chlorella vulgaris. Bioengineered, 11 (1). pp. 141-153.

Tan, J.S. and Lee, S.Y. and Chew, K.W. and Lam, M.K. and Lim, J.W. and Ho, S.-H. and Show, P.L. (2020) A review on microalgae cultivation and harvesting, and their biomass extraction processing using ionic liquids. Bioengineered, 11 (1). pp. 116-129.

U

Uddin, Shihab and Chowdhury, Md Raihan and Wakabayashi, Rie and Kamiya, Noriho and Moniruzzaman, Muhammad and Goto, Masahiro (2020) Lipid based biocompatible ionic liquids: synthesis, characterization and biocompatibility evaluation. Chemical Communications, 56 (89). pp. 13756-13759.

Ullah, Sami and Assiri, Mohammed Ali and Al-Sehemi, Abdullah Ghodran and Bustam, Mohamad Azmi and Sagir, Muhammad and Abdulkareem, Firas Ayad and Raza, Muhammad Rafi and Ayoub, Muhammad and Irfan, Ahmad (2020) Characteristically insights, artificial neural network (ANN), equilibrium, and kinetic studies of Pb (II) ion adsorption on rice husks treated with nitric acid. International Journal of Environmental Research, 14. pp. 43-60.

Ullah, Sami and Assiri, Mohammed Ali and Bustam, Mohamad Azmi and Al-Sehemi, Abdullah G and Abdul Kareem, Firas A and Irfan, Ahmad (2020) Equilibrium, kinetics and artificial intelligence characteristic analysis for Zn (II) ion adsorption on rice husks digested with nitric acid. Paddy and Water Environment, 18. pp. 455-468.

Ullah, Sami and Bustam, Mohamad Azmi and Al-Sehemi, Abdullah G and Assiri, Mohammed Ali and Gonfa, Girma and Mukhtar, Ahmad and Ayoub, Muhammad and Ahmad, Tausif (2020) Experimental investigations on the regeneration of desulfurized 1-butyl-3-methylimidazolium tetrachloroferrate BmimFeCl4 and 1-butyl-3-methylimidazolium thiocyanate BmimSCN ionic liquids: A raman spectroscopic study. Journal of Raman Spectroscopy, 51 (3). pp. 546-554.

Ullah, Sami and Bustam, Mohamad Azmi and Assiri, Mohammed Ali and Al-Sehemi, Abdullah G and Gonfa, Girma and Mukhtar, Ahmad and Kareem, Firas A Abdul and Ayoub, Muhammad and Saqib, Sidra and Mellon, Nurhayati Binti (2020) Synthesis and characterization of mesoporous MOF UMCM-1 for CO2/CH4 adsorption; an experimental, isotherm modeling and thermodynamic study. Microporous and Mesoporous Materials, 294. p. 109844.

Ullah, Sami and Bustam, Mohamad Azmi and Al-Sehemi, Abdullah G and Assiri, Mohammed Ali and Kareem, Firas A Abdul and Mukhtar, Ahmad and Ayoub, Muhammad and Gonfa, Girma (2020) Influence of post-synthetic graphene oxide (GO) functionalization on the selective CO2/CH4 adsorption behavior of MOF-200 at different temperatures; an experimental and adsorption isotherms study. Microporous and Mesoporous Materials, 296. p. 110002.

Ullah, Sami and Al-Sehemi, Abdullah G and Assiri, Mohammed Ali and Mukhtar, Ahmad and Ayoub, Muhammad and Bustam, Mohamad Azmi and Gonfa, Girma and Irfan, Ahmad and Imran, Muhammad (2020) Experimental investigation and modeling of the density, refractive index, and dynamic viscosity of 1-Propyronitrile-3-Butylimidazolium Dicyanamide. Journal of Molecular Liquids, 302. p. 112470.

Ung, W.C. and Meriaudeau, F. and Kiguchi, M. and Tang, T.B. (2020) Functional near-infrared spectroscopy adaptive cognitive training system (FACTS) for cognitive underload and overload prevention: A feasibility study. IEEE Access, 8. pp. 172939-172950.

Uddin, M. and Romlie, M.F. and Abdullah, M.F. and Tan, C. and Shafiullah, G.M. and Bakar, A.H.A. (2020) A novel peak shaving algorithm for islanded microgrid using battery energy storage system. Energy, 196.

Ullah, B. and Ovinis, M. and Baharom, M.B. and Ali, S.S.A. and Khan, B. and Javaid, M.Y. (2020) Effect of waves and current on motion control of underwater gliders. Journal of Marine Science and Technology (Japan), 25 (2). pp. 549-562.

Utomo, C. and Rahmawati, Y. (2020) Agreement options for negotiation on material location decision of housing development. Construction Innovation, 20 (2). pp. 209-222.

Ul Islam, B. and Mukhtar, A. and Saqib, S. and Mahmood, A. and Rafiq, S. and Hameed, A. and Khan, M.S. and Hamid, K. and Ullah, S. and Al-Sehemi, A.G. and Ibrahim, M. (2020) Thermal Conductivity of Multiwalled Carbon Nanotubes-Kapok Seed Oil-Based Nanofluid. Chemical Engineering and Technology, 43 (8). pp. 1638-1647.

Ung, W.C. and Tang, T.B. and Yap, K.H. and Ebenezer, E.G.M. and Chin, P.S. and Nordin, N. and Chan, S.C. and Yip, H.L. and Lu, C.-K. and Kiguchi, M. (2020) Assessing Neural Compensation with Visuospatial Working Memory Load Using Near-Infrared Imaging. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 28 (1). pp. 13-22.

Ullah, S. and Bustam, M.A. and Assiri, M.A. and Al-Sehemi, A.G. and Gonfa, G. and Mukhtar, A. and Abdul Kareem, F.A. and Ayoub, M. and Saqib, S. and Mellon, N.B. (2020) Synthesis and characterization of mesoporous MOF UMCM-1 for CO2/CH4 adsorption; an experimental, isotherm modeling and thermodynamic study. Microporous and Mesoporous Materials, 294.

Ullah, Z. and Nawi, I. and Witjaksono, G. and Tansu, N. and Khattak, M.I. and Junaid, M. and Siddiqui, M.A. and Magsi, S.A. (2020) Dynamic absorption enhancement and equivalent resonant circuit modeling of tunable graphene-metal hybrid antenna. Sensors (Switzerland), 20 (11).

Ullah, S. and Bustam, M.A. and Al-Sehemi, A.G. and Assiri, M.A. and Abdul Kareem, F.A. and Mukhtar, A. and Ayoub, M. and Gonfa, G. (2020) Influence of post-synthetic graphene oxide (GO) functionalization on the selective CO2/CH4 adsorption behavior of MOF-200 at different temperatures; an experimental and adsorption isotherms study. Microporous and Mesoporous Materials, 296.

Umar, S.N.H. and Akhtar, M.N. and Bakar, E.A. and Kamaruddin, N.M. and Othman, A.R. (2020) Development of heavy metal potentiostat for batik industry. Applied Sciences (Switzerland), 10 (21). pp. 1-12.

Ullah, Z. and Witjaksono, G. and Nawi, I. and Tansu, N. and Khattak, M.I. and Junaid, M. (2020) A review on the development of tunable graphene nanoantennas for terahertz optoelectronic and plasmonic applications. Sensors (Switzerland), 20 (5).

Umar, H.A. and Sulaiman, S.A. and Said, M.A.B.M. and Ahmad, R.K. (2020) Palm kernel shell as potential fuel for syngas production. Lecture Notes in Mechanical Engineering. pp. 263-273.

Uddin, V. and Rizvi, S.S.H. and Hashmani, M.A. and Jameel, S.M. and Ansari, T. (2020) A study of deterioration in classification models in real-time big data environment. Advances in Intelligent Systems and Computing, 1073. pp. 79-87.

Usman, F. and Dennis, J.O. and Mkawi, E.M. and Al-Hadeethi, Y. and Meriaudeau, F. and Fen, Y.W. and Sadrolhosseini, A.R. and Ferrell, T.L. and Alsadig, A. and Sulieman, A. (2020) Acetone vapor-sensing properties of chitosan-polyethylene glycol using surface plasmon resonance technique. Polymers, 12 (11). pp. 1-17.

Umar, A.A. and Saaid, I.M. and Halilu, A. and Sulaimon, A.A. and Ahmed, A.A. (2020) Magnetic polyester bis-MPA dendron nanohybrid demulsifier can effectively break water-in-crude oil emulsions. Journal of Materials Research and Technology, 9 (6). pp. 13411-13424.

Usman, M. and Siddiqui, N.A. and Mathew, M. and Zhang, S. and El-Ghali, M.A.K. and Ramkumar, M. and Jamil, M. and Zhang, Y. (2020) Linking the influence of diagenetic properties and clay texture on reservoir quality in sandstones from NW Borneo. Marine and Petroleum Geology, 120.

Usman, F. and Dennis, J.O. and Meriaudeau, F. and Ahmed, A.Y. and Seong, K.C. and Fen, Y.W. and Sadrolhosseini, A.R. and Abdulkadir, B.A. and Ayinla, R.T. and Daniyal, W.M.E.M.M. and Omar, N.A.S. and Tamam, N. and Sulieman, A. (2020) Dependence of the optical constant parameters of p-toluene sulfonic acid-doped polyaniline and its composites on dispersion solvents. Molecules, 25 (19).

Ung, Wei Chun and Meriaudeau, Fabrice and Kiguchi, Masashi and Tang, Tong Boon (2020) Functional near-infrared spectroscopy adaptive cognitive training system (facts) for cognitive underload and overload prevention: A feasibility study. IEEE Access, 8. pp. 172939-172950.

V

Vasant, P. and Marmolejo, J.A. and Litvinchev, I. and Aguilar, R.R. (2020) Nature-inspired meta-heuristics approaches for charging plug-in hybrid electric vehicle. Wireless Networks, 26 (7). pp. 4753-4766.

Vasudevan, M. and Tai, M.J.Y. and Perumal, V. and Gopinath, S.C.B. and Murthe, S.S. and Ovinis, M. and Mohamed, N.M. and Joshi, N. (2020) Highly sensitive and selective acute myocardial infarction detection using aptamer-tethered MoS2 nanoflower and screen-printed electrodes. Biotechnology and Applied Biochemistry.

Vasant, P. and Weber, G.-W. (2020) Guest Editorial: Smart Fuzzy Optimization in Operational Research and Renewable Energy: Modeling, Simulation, and Application. IEEE Transactions on Fuzzy Systems, 28 (11). pp. 2675-2676.

Vasant, P. and Weber, G.-W. and Zelinka, I. (2020) Preface. Advances in Intelligent Systems and Computing, 1072. v-vii.

Van Sy, L. and Quoc Binh, P.M. and Lal, B. and Nguyen, Q.B. and Van Hung, T. and Panaitescu, C. and Nam, N.D. (2020) The role of alloyed strontium in the microstructures and alkaline electrochemistry of Mg-5Al-4Sn alloys. RSC Advances, 10 (57). pp. 34387-34395.

W

Wongso, Viona and Chung, Hui Khee and Sambudi, Nonni Soraya and Sufian, Suriati and Abdullah, Bawadi and Wirzal, Muhammad Dzul Hakim and Ang, Wei Lun (2020) Silica--carbon quantum dots decorated titanium dioxide as sunlight-driven photocatalyst to diminish acetaminophen from aquatic environment. Journal of Photochemistry and Photobiology A: Chemistry, 394. p. 112436.

Wahaab, F.A. and Adebayo, L.L. and Adekoya, A.A. and Hakeem, I.G. and Alqasem, B. and Obalalu, A.M. (2020) Physiochemical properties and electromagnetic wave absorption performance of Ni0.5Cu0.5Fe2O4 nanoparticles at X-band frequency. Journal of Alloys and Compounds, 836.

Waqas, S. and Bilad, M.R. and Man, Z.B. and Klaysom, C. and Jaafar, J. and Khan, A.L. (2020) An integrated rotating biological contactor and membrane separation process for domestic wastewater treatment. Alexandria Engineering Journal, 59 (6). pp. 4257-4265.

Watada, J. and Roy, A. and Wang, B. and Tan, S.C. and Xu, B. (2020) An artificial bee colony-based double layered neural network approach for solving quadratic Bi-level programming problems. IEEE Access, 8. pp. 21549-21564.

Wu, J. and Lekkala, M.K.R. and Ong, M.C. (2020) Numerical investigation of vortex-induced vibrations of a flexible riser with staggered buoyancy elements. Applied Sciences (Switzerland), 10 (3).

Wahit, M.A.A. and Ahmad, S.A. and Marhaban, M.H. and Wada, C. and Izhar, L.I. (2020) 3d printed robot hand structure using four-bar linkage mechanism for prosthetic application. Sensors (Switzerland), 20 (15). pp. 1-22.

Wahab, M.M.A. and Kurian, V.J. and Liew, M.S. and Kim, D.K. (2020) Condition Assessment Techniques for Aged Fixed-Type Offshore Platforms Considering Decommissioning: a Historical Review. Journal of Marine Science and Application, 19 (4). pp. 584-614.

Wibisono, Y. and Fadila, C.R. and Saiful, S. and Bilad, M.R. (2020) Facile approaches of polymeric face masks reuse and reinforcements for micro-aerosol droplets and viruses filtration: A review. Polymers, 12 (11). pp. 1-18.

WATADA, J. and ROY, A. and LI, J. and WANG, B. and WANG, S. (2020) A Dual Recurrent Neural Network-based Hybrid Approach for Solving Convex Quadratic Bi-Level Programming Problem. Neurocomputing, 407. pp. 136-154.

Waqas, S. and Bilad, M.R. and Man, Z. and Wibisono, Y. and Jaafar, J. and Indra Mahlia, T.M. and Khan, A.L. and Aslam, M. (2020) Recent progress in integrated fixed-film activated sludge process for wastewater treatment: A review. Journal of Environmental Management, 268.

Wong, S.H.M. and Lim, S.S. and Tiong, T.J. and Show, P.L. and Zaid, H.F.M. and Loh, H.-S. (2020) Preliminary in vitro evaluation of chitosanâ��graphene oxide scaffolds on osteoblastic adhesion, proliferation, and early differentiation. International Journal of Molecular Sciences, 21 (15). pp. 1-12.

Wazir, N.A. and Ramli, A. and Yusof, N.M. and Saphanuchart, W. and Majanun, E.S. (2020) As-synthesized oleic amido propyl betaine surfactant mixture and the effect on the crude oil-seawater interfacial tension. Processes, 8 (8).

Wong, C.Y. and Lim, J.W. and Chong, F.K. and Lam, M.K. and Uemura, Y. and Tan, W.N. and Bashir, M.J.K. and Lam, S.M. and Sin, J.C. and Lam, S.S. (2020) Valorization of exo-microbial fermented coconut endosperm waste by black soldier fly larvae for simultaneous biodiesel and protein productions. Environmental Research, 185.

Y

Yusof, Siti Munirah Mhd and Shariff, Azmi Mohd and Tay, Wee Horng and Lau, Kok Keong and Mustafa, Nur Farhana Ajua (2020) Mass transfer intensification of CO2 absorption in monoethanolamine using high frequency ultrasonic technology in continuous system. International Journal of Greenhouse Gas Control, 102. p. 103157.

Yudyanto, Putri Nur Aini and Sufian, Suriati and Abadi, M Tommy Hasan and Maryam, Siti and Kurniawan, Robi and Mufti, Nandang (2020) Enhanced photoelectrochemical performance of Fe.

Yaqub, M.W. and Marappagounder, R. and Rusli, R. and Reddy Prasad, D.M. and Pendyala, R. (2020) Flow pattern identification and measurement techniques in gas-liquid-liquid three-phase flow: A review. Flow Measurement and Instrumentation, 76.

Yang, R. and Khan, F. and Neto, E.T. and Rusli, R. and Ji, J. (2020) Could pool fire alone cause a domino effect? Reliability Engineering and System Safety, 202.

Yusof, S.M.M. and Shariff, A.M. and Tay, W.H. and Lau, K.K. and Mustafa, N.F.A. (2020) Mass transfer intensification of CO2 absorption in monoethanolamine using high frequency ultrasonic technology in continuous system. International Journal of Greenhouse Gas Control, 102.

Yeganeh Ghotbi, M. and Javanmard, A. and Soleimani, H. (2020) A casting strategy to produce 3D bulk monolithic carbon and N-doped carbon nanosheets with high surface area and low volume. Microporous and Mesoporous Materials, 293.

Yong, T.H. and Chan, H.B. and Dol, S.S. and Wee, S.K. and Sulaiman, S.A. (2020) Experimental Investigation on Effects of Elastic Agitator to Turbulence Enhancement. Journal of Applied Fluid Mechanics, 14 (2). pp. 361-373.

Yamamoto, A. and Shinkai, T. and Loy, A.C.M. and Mohamed, M. and Baldovino, F.H.B. and Yusup, S. and Quitain, A.T. and Kida, T. (2020) Application of a solid electrolyte CO2 sensor to the performance evaluation of CO2 capture materials. Sensors and Actuators, B: Chemical, 315.

Yazdi, M. and Khan, F. and Abbassi, R. and Rusli, R. (2020) Improved DEMATEL methodology for effective safety management decision-making. Safety Science, 127.

Yamin, M.F. and Awang, M. and Suhuddin, U.F.H. and Sallih, N. and Klusemann, B. and dos Santos, J.F. (2020) Mechanical performance optimization of similar thin AA 7075-T6 sheets produced by refill friction stir spot welding Optimierung der mechanischen LeistungfÃ¤higkeit fÃ¼r artgleich produzierte AA 7075-T6-Bleche durch RÃ¼hr-Reib-Punkt-SchweiÃ�en. Materialwissenschaft und Werkstofftechnik, 51 (6). pp. 830-835.

Yaqub, M.W. and Rusli, R. and Pendyala, R. (2020) Experimental study on gas-liquid-liquid three-phase flow patterns and the resultant pressure drop in a horizontal pipe upstream of the 90Â° bend. Chemical Engineering Science, 226.

Younas, M. and Jawawi, D.N.A. and Mahmood, A.K. and Ahmad, M.N. and Sarwar, M.U. and Idris, M.Y. (2020) Agile Software Development Using Cloud Computing: A Case Study. IEEE Access, 8. pp. 4475-4484.

Yar, A. and Dennis, J.O. and Mohamed Saheed, M.S. and Mohamed, N.M. and Irshad, M.I. and Mumtaz, A. and Jose, R. (2020) Physical reduction of graphene oxide for supercapacitive charge storage. Journal of Alloys and Compounds, 822.

Yew, G.Y. and Khoo, K.S. and Chia, W.Y. and Ho, Y.-C. and Law, C.L. and Leong, H.Y. and Show, P.L. (2020) A novel lipids recovery strategy for biofuels generation on microalgae Chlorella cultivation with waste molasses. Journal of Water Process Engineering, 38.

Yusoff, M.H.M. and Nyunt, E.K. and Bilad, M.R. and Arahman, N. and Mulyati, S. and Rizal, S. and Nordin, N.A.H. and Leam, J.J. and Khan, A.L. and Jaafar, J. (2020) Hybrid membrane distillation and wet scrubber for simultaneous recovery of heat and water from flue gas. Entropy, 22 (2).

Yahya, N. and Nyuk, C.M. and Ismail, A.F. and Hussain, N. and Rostami, A. and Ismail, A. and Ganeson, M. and Ali, A.M. (2020) Inversion algorithm of fiber bragg grating for nanofluid flooding monitoring. Sensors (Switzerland), 20 (4).

Yahya, W.Z.N. and Hong, P.Z. and Zain, W.Z. and Mohamed, N.M. (2020) Tripropyl Chitosan iodide-based gel polymer electrolyte as quasi solid-state dye sensitized solar cells. Materials Science Forum, 997 MS. pp. 69-76.

Yeni, Y. and Supandi, S. and Dwita, L.P. and Suswandari, S. and Shaharun, M.S. and Sambudi, N.S. (2020) Docking studies and molecular dynamics simulation of ipomoea batatas L. leaves compounds as lipoxygenase (LOX) inhibitor. Journal of Pharmacy and Bioallied Sciences, 12 (6). S836-S840.

Yekeen, S.T. and Balogun, A.-L. (2020) Advances in remote sensing technology, machine learning and deep learning for marine oil spill detection, prediction and vulnerability assessment. Remote Sensing, 12 (20). pp. 1-31.

Yuha, Y.B.M. and Bavoh, C.B. and Lal, B. and Broni-Bediako, E. (2020) Methane hydrate phase behaviour in EMIM-Cl water based mud (WBM): An experimental and modelling study. South African Journal of Chemical Engineering, 34. pp. 47-56.

Yang, R. and Khan, F. and Neto, E.T. and Rusli, R. and Ji, J. (2020) Could pool fire alone cause a domino effect? Reliability Engineering and System Safety, 202.

Yekeen, N. and Padmanabhan, E. and Sevoo, T.A. and Kanesen, K.A. and Okunade, O.A. (2020) Wettability of rock/CO2/brine systems: A critical review of influencing parameters and recent advances. Journal of Industrial and Engineering Chemistry, 88. pp. 1-28.

Yunos, Y.F.M. and Ibrahim, M.Y. (2020) Microstructure and mechanism of silicanizing process on mild steel substrate using tronoh silica sand at 1000 Â°c for 4 h. Lecture Notes in Mechanical Engineering. pp. 396-401.

Yew, G.Y. and Tham, T.C. and Show, P.-L. and Ho, Y.-C. and Ong, S.K. and Law, C.L. and Song, C. and Chang, J.-S. (2020) Unlocking the Secret of Bio-additive Components in Rubber Compounding in Processing Quality Nitrile Glove. Applied Biochemistry and Biotechnology, 191 (1).

Yavari, S. and Abualqumboz, M. and Sapari, N. and Hata-Suhaimi, H.-A. and Nik-Fuaad, N.-Z. and Yavari, S. (2020) Sorption of imazapic and imazapyr herbicides on chitosan-modified biochars. International Journal of Environmental Science and Technology, 17 (7). pp. 3341-3350.

Z

Zahid, M. and Shafiq, N. and Razak, S.N.A. and Tufail, R.F. (2020) Investigating the effects of NaOH molarity and the geometry of PVA fibers on the post-cracking and the fracture behavior of engineered geopolymer composite. Construction and Building Materials, 265. (Submitted)

Zhalehrajabi, Ehsan and Lau, Kok Keong and KuShaari, KuZilati and Tay, Wee Horng and Hagemeier, Thomas and Idris, Alamin (2020) Modelling of urea aggregation efficiency via particle tracking velocimetry in fluidized bed granulation. Chemical Engineering Science, 223. p. 115737.

Zulfiqar, Muhammad and Samsudin, Mohamad Fakhrul Ridhwan and Taqvi, Syed Ali Ammar and Sufian, Suriati (2020) Corrigendum to â Modelling and optimization of photocatalytic degradation of phenol via TiO2 nanoparticles: An insight into response surface methodology and artificial neural networkâ J. Photochem. Photobiol. A: Chem. 384 (2019) 1â 15/112039 (Journal of Photochemistry & Photobiology, A: Chemistry (2019) 384,(S1010603019308883),(10.1016/j. jphotochem. 2019.112039)). Journal of Photochemistry and Photobiology A: Chemistry, 400.

Zahid, M.S.M. and Wahab, N.N.A. (2020) Plant watering system using mobile application. International Journal of Advanced Trends in Computer Science and Engineering, 9 (1.1 Sp). pp. 370-373.

Zahari, A.S. and Rahim, L.A. and Nurhadi, N.A. and Aslam, M. (2020) A domain-specific modelling language for adventure educational games and flow theory. International Journal on Advanced Science, Engineering and Information Technology, 10 (3). pp. 999-1007.

Zahid, Imtisal and Ayoub, Muhammad and Abdullah, Bawadi B and Nazir, Muhammad Hamza and Ameen, Mariam and Zulqarnain and Mohd Yusoff, Mohd Hizami and Inayat, Abrar and Danish, Mohammed (2020) Production of fuel additive solketal via catalytic conversion of biodiesel-derived glycerol. Industrial & Engineering Chemistry Research, 59 (48). pp. 20961-20978.

Zainudin, A.A. and Yunus, N.A. and Mazlan, S.A. and Shabdin, M.K. and Aziz Abdul, S.A. and Nordin, N.A. and Nazmi, N. and Rahman, M.A.A. (2020) Rheological and resistance properties of magnetorheological elastomer with cobalt for sensor application. Applied Sciences (Switzerland), 10 (5).

Zahari, M.H.B. and Guan, B.H. and Chuan, L.K. and Zainudin, A.A.B. (2020) Structural, morphological and magnetic characterization of Sm-substituted Ni-Zn ferrite. Nanoscience and Nanotechnology - Asia, 10 (2). pp. 152-156.

Zahid, I. and Ayoub, M. and Abdullah, B.B. and Nazir, M.H. and Ameen, M. and Zulqarnain and Mohd Yusoff, M.H. and Inayat, A. and Danish, M. (2020) Production of Fuel Additive Solketal via Catalytic Conversion of Biodiesel-Derived Glycerol. Industrial and Engineering Chemistry Research, 59 (48). pp. 20961-20978.

Zango, Z.U. and Sambudi, N.S. and Jumbri, K. and Abu Bakar, N.H.H. and Abdullah, N.A.F. and Negim, E.-S.M. and Saad, B. (2020) Experimental and molecular docking model studies for the adsorption of polycyclic aromatic hydrocarbons onto UiO-66(Zr) and NH2-UiO-66(Zr) metal-organic frameworks. Chemical Engineering Science, 220.

Zahid, M. and Rahman, H.U. and Ali, W. and Khan, M. and Alharthi, M. and Imran Qureshi, M. and Jan, A. (2020) Boardroom gender diversity: Implications for corporate sustainability disclosures in Malaysia. Journal of Cleaner Production, 244.

Zeain, M.Y. and Zakaria, Z. and Abu, M. and Al-Gburi, A.J.A. and Alsariera, H. and Toding, A. and Alani, S. and Al-Tarifi, M.A. and Al-Heety, O.S. and Lago, H. and Saeidi, T. (2020) Design of helical antenna for next generation wireless communication. Przeglad Elektrotechniczny, 96 (11). pp. 96-99.

Zahoor, F. and Zulkifli, T.Z.A. and Khanday, F.A. and Zainol Murad, S.A. (2020) Carbon Nanotube and Resistive Random Access Memory Based Unbalanced Ternary Logic Gates and Basic Arithmetic Circuits. IEEE Access, 8. pp. 104701-104717.

Zakaria, R. and Zainuddin, N.A.M. and Raya, S.A. and Alwi, S.A.K. and Anwar, T. and Sarlan, A. and Ahmed, K. and Amiri, I.S. (2020) Sensitivity comparison of refractive index transducer optical fiber based on surface plasmon resonance using Ag, Cu, and bimetallic Ag-Cu layer. Micromachines, 11 (1).

Zainal, S.A. and Daud, W.R. and Rosli, M.I. and Harun, S. and Putra, Z.A. and Bilad, M.R. (2020) Integrated surface and sub-surface simulation model in a single simulation platform. Indonesian Journal of Science and Technology, 5 (1). pp. 109-124.

Zulfiqar, M. and Chowdhury, S. and Samsudin, M.F.R. and Siyal, A.A. and Omar, A.A. and Ahmad, T. and Sufian, S. (2020) Effect of organic solvents on the growth of TiO2 nanotubes: An insight into photocatalytic degradation and adsorption studies. Journal of Water Process Engineering, 37.

Zainal Abidin, N.H. and Wongso, V. and Hui, K.C. and Cho, K. and Sambudi, N.S. and Ang, W.L. and Saad, B. (2020) The effect of functionalization on rice-husks derived carbon quantum dots properties and cadmium removal. Journal of Water Process Engineering, 38.

Zhalehrajabi, E. and Lau, K.K. and KuShaari, K. and Tay, W.H. and Hagemeier, T. and Idris, A. (2020) Modelling of urea aggregation efficiency via particle tracking velocimetry in fluidized bed granulation. Chemical Engineering Science, 223.

Zulfiqar, Muhammad and Sufian, Suriati and Rabat, Nurul Ekmi and Mansor, Nurlidia (2020) Photocatalytic degradation and adsorption of phenol by solvent-controlled TiO2 nanosheets assisted with H2O2 and FeCl3: Kinetic, isotherm and thermodynamic analysis. JOURNAL OF MOLECULAR LIQUIDS, 308.

Zahraee, S.M. and Mokhtar, A.A. and Tolooie, A. and Mohd Asri, N.A. (2020) Performance Evaluation of EFB Biomass Supply Chain for Electricity Power Generation Based on Computer Simulation: Malaysia Case Study. Lecture Notes in Mechanical Engineering. pp. 363-375.

Zango, Z.U. and Jumbri, K. and Sambudi, N.S. and Ramli, A. and Bakar, N.H.H.A. and Saad, B. and Rozaini, M.N.H. and Isiyaka, H.A. and Jagaba, A.H. and Aldaghri, O. and Sulieman, A. (2020) A critical review on metal-organic frameworks and their composites as advanced materials for adsorption and photocatalytic degradation of emerging organic pollutants from wastewater. Polymers, 12 (11). pp. 1-42.

Zulqarnain and Yusoff, M.H.M. and Ayoub, M. and Jusoh, N. and Abdullah, A.Z. (2020) The challenges of a biodiesel implementation program in Malaysia. Processes, 8 (10). pp. 1-18.

Zango, Z.U. and Dahiru, M. and Haruna, M.A. (2020) Adsorption kinetics, isotherms and thermodynamics for malachite green and methylene blue removal in water using low-cost banana peel biosorbent. Research Journal of Chemistry and Environment, 24 (10). pp. 83-92.

Zango, Z.U. and Sambudi, N.S. and Jumbri, K. and Ramli, A. and Bakar, N.H.H.A. and Saad, B. and Rozaini, M.N.H. and Isiyaka, H.A. and Osman, A.M. and Sulieman, A. (2020) An overview and evaluation of highly porous adsorbent materials for polycyclic aromatic hydrocarbons and phenols removal from wastewater. Water (Switzerland), 12 (10). pp. 1-40.

Zaeni, J.R.J. and Adnan, R. and Lim, J.-W. and Oh, W.-D. (2020) One-pot synthesis of oxygen-functionalized porous carbon from biowaste for rapid organics removal via peroxymonosulfate activation. Materials Today Chemistry, 17.

Zulfiqar, M. and Chowdhury, S. and Omar, A.A. and Siyal, A.A. and Sufian, S. (2020) Response surface methodology and artificial neural network for remediation of acid orange 7 using TiO2-P25: optimization and modeling approach. Environmental Science and Pollution Research, 27 (27). pp. 34018-34036.

Zulfiqar, M. and Samsudin, M.F.R. and Taqvi, S.A.A. and Sufian, S. (2020) Corrigendum to â��Modelling and optimization of photocatalytic degradation of phenol via TiO2 nanoparticles: An insight into response surface methodology and artificial neural networkâ�� J. Photochem. Photobiol. A: Chem. 384 (2019) 1â��15/112039 (Journal of Photochemistry & Photobiology, A: Chemistry (2019) 384, (S1010603019308883), (10.1016/j.jphotochem.2019.112039)). Journal of Photochemistry and Photobiology A: Chemistry, 400.

Zahir, N.A.M. and Beg, M.A. and Kadir, A.A. (2020) Hydrothermal Dolomitization on Devonian to Carboniferous Carbonates in Kinta Valley, Perak, Malaysia: A Petrographic Study. Indonesian Journal on Geoscience, 7 (1). pp. 1-39.

Zhou, D. and Gopinath, S.C.B. and Mohamed Saheed, M.S. and Siva Sangu, S. and Lakshmipriya, T. (2020) Mxene surface on multiple junction triangles for determining osteosarcoma cancer biomarker by dielectrode microgap sensor. International Journal of Nanomedicine, 15. pp. 10171-10181.

Zailani, N.H.Z.O. and Yunus, N.M. and Rahim, A.H.A. and Bustam, M.A. (2020) Thermophysical properties of newly synthesized ammonium-based protic ionic liquids: Effect of temperature, anion and alkyl chain length. Processes, 8 (6). pp. 1-15.

Zubair Yahaya, A. and Rao Somalu, M. and Muchtar, A. and Anwar Sulaiman, S. and Ramli Wan Daud, W. (2020) Effects of temperature on the chemical composition of tars produced from the gasification of coconut and palm kernel shells using downdraft fixed-bed reactor. Fuel, 265.

Zaini, Zuraini Hanim and Arshad, Noreen Izza and Singh, Balbir SM and Aszemi, Nurshazlyn M and Anggoro, Subuh and Hawanti, Santhy (2020) A Study on Student Attitudes in Learning Programming using Physical Computing. Dinamika Jurnal Ilmiah Pendidikan Dasar, 12 (1). pp. 25-32.

This list was generated on Tue Dec 3 14:44:40 2024 +08.