Browse by Type

Book

Mannan, H.A. and Nasir, R. and Mukhtar, H. and Mohshim, D.F. and Shaharun, M.S. (2019) Role of ionic liquids in eliminating interfacial defects in mixed matrix membranes. Elsevier, pp. 269-309.

Abbas, T. and Haji Ya, H. and Zaki Abdullah, M. and Hassan, S. and Javaid, M.Y. (2019) Prospect of composite tubes based on bi-materials for weight reduction of vehicles. Springer Singapore, pp. 27-51.

Yusup, S. and Bokhari, A. and Trinh, H. and Shahbaz, M. and Patrick, D.O. and Cheah, K.W. and Azizan, M.T. and Ramli, A. and Ameen, M. and Osman, N. and Shuhaili, A.F.A. and Singh, H.K.G. (2019) Emerging technologies for biofuels production. Elsevier, pp. 45-76.

Khan, A.S. and Man, Z. and Nasrullah, A. and Ullah, Z. and Muhammad, N. and Rahim, A. and Bustam, A. and Idris, A. (2019) Conversion of biomass to chemicals using ionic liquids. Elsevier Inc., pp. 1-30.

Ali, F.A.M. and Karim, S.A.A. and Dass, S.C. and Skala, V. and Hasan, M.K. and Hashim, I. (2019) Efficient visualization of scattered energy distribution data by using cubic timmer triangular patches. Springer Singapore, pp. 145-180.

Singh, H.K.G. and Yusup, S. (2019) Optimisation study of catalytic cracking of refined rubber seed oil for biogasoline production using response surface methodology. Springer International Publishing, pp. 171-185.

Aziz, A.R.A. and Ismael, M.A. and Heikal, M. and Firmansyah and Dalha, I.B. and Abidin, E.Z.Z. (2019) Water in diesel emulsion behavior in high-pressure direct injection system. Springer Singapore, pp. 85-99.

Lam, M.K. and Jamalluddin, N.A. and Lee, K.T. (2019) Production of biodiesel using palm oil. Elsevier, pp. 539-574.

Wibisono, Y. and Bilad, M.R. (2019) Design of forward osmosis system. Elsevier Inc., pp. 57-83.

Sulaiman, S.A. and Keat, C.S. and Seng, B.H. and Syahir Sazali, M. and Ashraf Azhar, M. (2019) A study on handling of stranded motorcycles in Malaysia. Springer Singapore, pp. 199-210.

Sulaiman, S.A. (2019) Introduction to mobility systems. Springer Singapore, pp. 1-8.

Dalha, I.B. and Said, M.A. and Abdul Karim, Z.A. and Aziz, A.R.A. and Firmansyah and Abidin, E.Z.Z. and Ismael, M.A. (2019) Reactivity controlled compression ignition: An advanced combustion mode for improved energy efficiency. Springer Singapore, pp. 101-126.

Razak, M.A.A. and Abdul-Rani1, A.M. and Abdu Aliyu, A.A. (2019) Innovative surface engineering technique for surface modification of Mg alloy for orthopedic application. Springer International Publishing, pp. 225-240.

Aziz, A.R.A. and Baharom, M.B. and Abidin, E.Z.Z. and Firmansyah and Mohammed, S.E. and Nadhari, W.N.A.W. and Evelyn and Jaffry, M.N.M. (2019) Principal, design and characteristics of a free piston linear generator. Springer Singapore, pp. 127-144.

Kurnia, J.C. and Sasmito, A.P. (2019) Hydrogen fuel cell in vehicle propulsion: Performance, efficiency, and challenge. Springer Singapore, pp. 9-26.

Dharmowijoyo, D.B.E. and Joewono, T.B. (2019) Mobility and health: The interaction of activity-travel patterns, overall well-being, transport-related social exclusion on health parameters. Springer Singapore, pp. 53-83.

Zahidah, K.A. and Kakooei, S. and Ismail, M.C. and Mohebbi, H. and Joshaghani, A.H. and Ghasemi, M. and Eng, K.K. (2019) Smart anticorrosive coatings containing corrosion inhibitor-loaded halloysite nanotubes. Elsevier, pp. 425-447.

Sulaiman, S.A. and Keat, C.S. and Seng, B.H. and Syahir Sazali, M. and Ashraf Azhar, M. (2019) A study on handling of stranded motorcycles in Malaysia. Springer Singapore, pp. 199-210.

Aziz, A.R.A. and Baharom, M.B. and Abidin, E.Z.Z. and Firmansyah and Mohammed, S.E. and Nadhari, W.N.A.W. and Evelyn and Jaffry, M.N.M. (2019) Principal, design and characteristics of a free piston linear generator. Springer Singapore, pp. 127-144.

Aziz, A.R.A. and Ismael, M.A. and Heikal, M. and Firmansyah and Dalha, I.B. and Abidin, E.Z.Z. (2019) Water in diesel emulsion behavior in high-pressure direct injection system. Springer Singapore, pp. 85-99.

Sulaiman, S.A. (2019) Introduction to mobility systems. Springer Singapore, pp. 1-8.

Yusup, S. and Bokhari, A. and Trinh, H. and Shahbaz, M. and Patrick, D.O. and Cheah, K.W. and Azizan, M.T. and Ramli, A. and Ameen, M. and Osman, N. and Shuhaili, A.F.A. and Singh, H.K.G. (2019) Emerging technologies for biofuels production. Elsevier, pp. 45-76.

Dalha, I.B. and Said, M.A. and Abdul Karim, Z.A. and Aziz, A.R.A. and Firmansyah and Abidin, E.Z.Z. and Ismael, M.A. (2019) Reactivity controlled compression ignition: An advanced combustion mode for improved energy efficiency. Springer Singapore, pp. 101-126.

Singh, H.K.G. and Yusup, S. (2019) Optimisation study of catalytic cracking of refined rubber seed oil for biogasoline production using response surface methodology. Springer International Publishing, pp. 171-185.

Wibisono, Y. and Bilad, M.R. (2019) Design of forward osmosis system. Elsevier Inc., pp. 57-83.

Mannan, H.A. and Nasir, R. and Mukhtar, H. and Mohshim, D.F. and Shaharun, M.S. (2019) Role of ionic liquids in eliminating interfacial defects in mixed matrix membranes. Elsevier, pp. 269-309.

Abbas, T. and Haji Ya, H. and Zaki Abdullah, M. and Hassan, S. and Javaid, M.Y. (2019) Prospect of composite tubes based on bi-materials for weight reduction of vehicles. Springer Singapore, pp. 27-51.

Kurnia, J.C. and Sasmito, A.P. (2019) Hydrogen fuel cell in vehicle propulsion: Performance, efficiency, and challenge. Springer Singapore, pp. 9-26.

Dharmowijoyo, D.B.E. and Joewono, T.B. (2019) Mobility and health: The interaction of activity-travel patterns, overall well-being, transport-related social exclusion on health parameters. Springer Singapore, pp. 53-83.

Zahidah, K.A. and Kakooei, S. and Ismail, M.C. and Mohebbi, H. and Joshaghani, A.H. and Ghasemi, M. and Eng, K.K. (2019) Smart anticorrosive coatings containing corrosion inhibitor-loaded halloysite nanotubes. Elsevier, pp. 425-447.

Razak, M.A.A. and Abdul-Rani1, A.M. and Abdu Aliyu, A.A. (2019) Innovative surface engineering technique for surface modification of Mg alloy for orthopedic application. Springer International Publishing, pp. 225-240.

Lam, M.K. and Jamalluddin, N.A. and Lee, K.T. (2019) Production of biodiesel using palm oil. Elsevier, pp. 539-574.

Ali, F.A.M. and Karim, S.A.A. and Dass, S.C. and Skala, V. and Hasan, M.K. and Hashim, I. (2019) Efficient visualization of scattered energy distribution data by using cubic timmer triangular patches. Springer Singapore, pp. 145-180.

Khan, A.S. and Man, Z. and Nasrullah, A. and Ullah, Z. and Muhammad, N. and Rahim, A. and Bustam, A. and Idris, A. (2019) Conversion of biomass to chemicals using ionic liquids. Elsevier Inc., pp. 1-30.

Khan, A.S. and Man, Z. and Nasrullah, A. and Ullah, Z. and Muhammad, N. and Rahim, A. and Bustam, A. and Idris, A. (2019) Conversion of biomass to chemicals using ionic liquids. Elsevier Inc., pp. 1-30.

Singh, H.K.G. and Yusup, S. (2019) Optimisation study of catalytic cracking of refined rubber seed oil for biogasoline production using response surface methodology. Springer International Publishing, pp. 171-185.

Wibisono, Y. and Bilad, M.R. (2019) Design of forward osmosis system. Elsevier Inc., pp. 57-83.

Ganat, T.A.-A.O. (2019) Fundamentals of reservoir rock properties. Springer International Publishing, pp. 1-156.

Wibisono, Y. and Bilad, M.R. (2019) Design of forward osmosis system. Elsevier Inc., pp. 57-83.

Ganat, T.A.-A.O. (2019) Fundamentals of reservoir rock properties. Springer International Publishing, pp. 1-156.

Razak, M.A.A. and Abdul-Rani1, A.M. and Abdu Aliyu, A.A. (2019) Innovative surface engineering technique for surface modification of Mg alloy for orthopedic application. Springer International Publishing, pp. 225-240.

Mannan, H.A. and Nasir, R. and Mukhtar, H. and Mohshim, D.F. and Shaharun, M.S. (2019) Role of ionic liquids in eliminating interfacial defects in mixed matrix membranes. Elsevier, pp. 269-309.

Abbas, T. and Haji Ya, H. and Zaki Abdullah, M. and Hassan, S. and Javaid, M.Y. (2019) Prospect of composite tubes based on bi-materials for weight reduction of vehicles. Springer Singapore, pp. 27-51.

Kurnia, J.C. and Sasmito, A.P. (2019) Hydrogen fuel cell in vehicle propulsion: Performance, efficiency, and challenge. Springer Singapore, pp. 9-26.

Dharmowijoyo, D.B.E. and Joewono, T.B. (2019) Mobility and health: The interaction of activity-travel patterns, overall well-being, transport-related social exclusion on health parameters. Springer Singapore, pp. 53-83.

Sulaiman, S.A. and Keat, C.S. and Seng, B.H. and Syahir Sazali, M. and Ashraf Azhar, M. (2019) A study on handling of stranded motorcycles in Malaysia. Springer Singapore, pp. 199-210.

Aziz, A.R.A. and Baharom, M.B. and Abidin, E.Z.Z. and Firmansyah and Mohammed, S.E. and Nadhari, W.N.A.W. and Evelyn and Jaffry, M.N.M. (2019) Principal, design and characteristics of a free piston linear generator. Springer Singapore, pp. 127-144.

Aziz, A.R.A. and Ismael, M.A. and Heikal, M. and Firmansyah and Dalha, I.B. and Abidin, E.Z.Z. (2019) Water in diesel emulsion behavior in high-pressure direct injection system. Springer Singapore, pp. 85-99.

Sulaiman, S.A. (2019) Preface. Springer Singapore, v.

Sulaiman, S.A. (2019) Energy efficiency in mobility systems. Springer Singapore, pp. 1-210.

Sulaiman, S.A. (2019) Introduction to mobility systems. Springer Singapore, pp. 1-8.

Zahidah, K.A. and Kakooei, S. and Ismail, M.C. and Mohebbi, H. and Joshaghani, A.H. and Ghasemi, M. and Eng, K.K. (2019) Smart anticorrosive coatings containing corrosion inhibitor-loaded halloysite nanotubes. Elsevier, pp. 425-447.

Lam, M.K. and Jamalluddin, N.A. and Lee, K.T. (2019) Production of biodiesel using palm oil. Elsevier, pp. 539-574.

Yusup, S. and Bokhari, A. and Trinh, H. and Shahbaz, M. and Patrick, D.O. and Cheah, K.W. and Azizan, M.T. and Ramli, A. and Ameen, M. and Osman, N. and Shuhaili, A.F.A. and Singh, H.K.G. (2019) Emerging technologies for biofuels production. Elsevier, pp. 45-76.

Dalha, I.B. and Said, M.A. and Abdul Karim, Z.A. and Aziz, A.R.A. and Firmansyah and Abidin, E.Z.Z. and Ismael, M.A. (2019) Reactivity controlled compression ignition: An advanced combustion mode for improved energy efficiency. Springer Singapore, pp. 101-126.

Ali, F.A.M. and Karim, S.A.A. and Dass, S.C. and Skala, V. and Hasan, M.K. and Hashim, I. (2019) Efficient visualization of scattered energy distribution data by using cubic timmer triangular patches. Springer Singapore, pp. 145-180.

Kharchenko, V. and Vasant, P. (2019) Handbook of research on smart computing for renewable energy and agro-engineering. IGI Global, pp. 1-537.

Ganesan, T. and Vasant, P. (2019) Lévy-enhanced swarm intelligence for optimizing a multiobjective biofuel supply chain. IGI Global, pp. 287-309.

Kharchenko, V. and Vasant, P. (2019) Preface. IGI Global, xxiv-xxx.

Mannan, H.A. and Nasir, R. and Mukhtar, H. and Mohshim, D.F. and Shaharun, M.S. (2019) Role of ionic liquids in eliminating interfacial defects in mixed matrix membranes. Elsevier, pp. 269-309.

Ahmed, S. and Ibrahim, M. and Ahmad, F. and Rana, H.A. and Rao, T. and Anwar, W. and Younus, M. and Ahmad, W. and Farooqi, S.H. and Aftab, A. and Hussain, M. and Khalid, M. and Kamal, G.M. (2019) Microbial risk assessment and antimicrobial resistance. Elsevier, pp. 313-330.

Leam, J.J. and Bilad, M.R. and Wibisono, Y. and Wirzal, M.D.H. and Ahmed, I. (2019) Membrane technology for microalgae harvesting. Elsevier, pp. 97-110.

Abbas, T. and Haji Ya, H. and Zaki Abdullah, M. and Hassan, S. and Javaid, M.Y. (2019) Prospect of composite tubes based on bi-materials for weight reduction of vehicles. Springer Singapore, pp. 27-51.

Zahidah, K.A. and Kakooei, S. and Ismail, M.C. and Mohebbi, H. and Joshaghani, A.H. and Ghasemi, M. and Eng, K.K. (2019) Smart anticorrosive coatings containing corrosion inhibitor-loaded halloysite nanotubes. Elsevier, pp. 425-447.

Yim, S.C. and Chan, Y.H. and Yusup, S. and Johari, K. and Quitain, A.T. and Dailin, D.J. (2019) Supercritical extraction of value-added compounds from empty fruit bunch: An optimization study by response surface methodology. Elsevier, pp. 281-298.

Goh, P.S. and Wong, T.W. and Lim, J.W. and Ismail, A.F. and Hilal, N. (2019) Innovative and sustainable membrane technology for wastewater treatment and desalination application. Elsevier, pp. 291-319.

Ali, B. and Yusup, S. and Quitain, A.T. and Bokhari, A. and Kida, T. and Chuah, L.F. (2019) Heterogeneous catalytic conversion of rapeseed oil to methyl esters: Optimization and kinetic study. Elsevier, pp. 221-238.

Lam, M.K. and Jamalluddin, N.A. and Lee, K.T. (2019) Production of biodiesel using palm oil. Elsevier, pp. 539-574.

Yusup, S. and Bokhari, A. and Trinh, H. and Shahbaz, M. and Patrick, D.O. and Cheah, K.W. and Azizan, M.T. and Ramli, A. and Ameen, M. and Osman, N. and Shuhaili, A.F.A. and Singh, H.K.G. (2019) Emerging technologies for biofuels production. Elsevier, pp. 45-76.

Dalha, I.B. and Said, M.A. and Abdul Karim, Z.A. and Aziz, A.R.A. and Firmansyah and Abidin, E.Z.Z. and Ismael, M.A. (2019) Reactivity controlled compression ignition: An advanced combustion mode for improved energy efficiency. Springer Singapore, pp. 101-126.

Ali, F.A.M. and Karim, S.A.A. and Dass, S.C. and Skala, V. and Hasan, M.K. and Hashim, I. (2019) Efficient visualization of scattered energy distribution data by using cubic timmer triangular patches. Springer Singapore, pp. 145-180.

Bokhari, A. and Chuah, L.F. and Michelle, L.Z.Y. and Asif, S. and Shahbaz, M. and Akbar, M.M. and Inayat, A. and Jami, F. and Naqvi, S.R. and Yusup, S. (2019) Microwave enhanced catalytic conversion of canola-based methyl ester: Optimization and parametric study. Elsevier, pp. 153-166.

Bhaskar Reddy, A.V. and Moniruzzaman, M. and Goto, M. (2019) Ionic liquids for pretreatment of biomass. Elsevier, pp. 190-198.

Khoo, C.G. and Lam, M.K. and Lee, K.T. (2019) Microscale and macroscale modeling of microalgae cultivation in photobioreactor: A review and perspective. Elsevier, pp. 1-19.

Itoh, Toshiyuki and Koo, Yoon-Mo (2019) Application of Ionic Liquids in Biotechnology. Springer.