Items where Author is "Abdul-Rani, A.M."

Ahmed, I. and Ahmad, A. and Abdul-Rani, A.M. and Tasnim, N. and Al-Amin, M. (2023) A Comparative Review of Surface Modification Technique Between Physical Vapor Deposition (PVD) and Plasma Electrolytic Oxidation (PEO) for Biomedical Applications. Lecture Notes in Mechanical Engineering. pp. 813-829. ISSN 21954356

Hastuty, S. and Saputra, F.R.A. and Ryandwita, B.W. and Awwaluddin, M. and Kartaman, M. and Yanlinastuti and Widharyanti, I.D. and Dahliyanti, A. and Oktaviano, H.S. and Ali, S. and Aliyu, A.�A.A. and Abdul-Rani, A.M. and Yadav, A.P. (2023) Corrosion Resistance Enhancement of Stainless Steel Powder Metallurgy in Artificial Body Fluids by Reinforcement of Boron and Niobium. Lecture Notes in Mechanical Engineering. pp. 839-850. ISSN 21954356

Aliyu, A.A. and Abdul-Rani, A.M. and Al-Amin, M. and Hastuty, S. and Razak, M.A. and Ali, S. and Danish, M. and Rubaiee, S. and Bin Mahfouz, A. and Hamza, A.N. (2023) Deposition of biomimetic biocompatible oxides on metallic glass surface by electro-discharge coating process Abscheidung biomimetischer biokompatibler Oxide auf metallischen Glasoberflächen durch elektrische Entladungsbeschichtung. Materialwissenschaft und Werkstofftechnik, 54 (1). pp. 129-136.

Al-Amin, M. and Danish, M. and Rubaiee, S. and Ahmed, A. and Abdul-Rani, A.M. and Mannan, A. and Yildirim, M.B. (2023) Improvement in 316L steel surface features, corrosion and biocompatibility through novel CNT-assisted hydroxyapatite powder mixed-EDM process. Applied Physics A: Materials Science and Processing, 129 (7). ISSN 09478396

Sharuddin, M.H.B. and Sulaiman, M.H. and Kamaruddin, S. and Dahnel, A.H. and Abd Halim, N.F.H. and Ridzuan, M.J.M. and Abdul-Rani, A.M. (2023) Properties and tribological evaluation of graphene and fullerene nanoparticles as additives in oil lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 237 (8). pp. 1647-1656. ISSN 13506501

Danish, M. and Al-Amin, M. and Rubaiee, S. and Abdul-Rani, A.M. and Zohura, F.T. and Ahmed, A. and Ahmed, R. and Yildirim, M.B. (2022) Enhanced machining features and multi-objective optimization of CNT mixed-EDM process for processing 316L steel. International Journal of Advanced Manufacturing Technology, 120 (9-10). pp. 6125-6141.

Al-Amin, M. and Abdul-Rani, A.M. and Rana, M. and Hastuty, S. and Danish, M. and Rubaiee, S. and Mahfouz, A.B. (2022) Evaluation of modified 316L surface properties through HAp suspended EDM process for biomedical application. Surfaces and Interfaces, 28.

Sulaiman, M.H. and Ridzuan, M.J.M. and Jaafar, H. and Tajul, L. and Abdul-Rani, A.M. (2022) The Influence of Engineered Tool Surfaces in Ironing. Lecture Notes in Mechanical Engineering. pp. 61-64.

Sulaiman, M.H. and Ridzuan, M.J.M. and Jaafar, H. and Tajul, L. and Abdul-Rani, A.M. (2022) The Influence of Engineered Tool Surfaces in Ironing. Lecture Notes in Mechanical Engineering. pp. 61-64.

Al-Amin, M. and Abdul-Rani, A.M. and Rao, T.V.V.L.N. and Danish, M. and Rubaiee, S. and Mahfouz, A.B. and Parameswari, R.P. and Wani, M.F. (2022) Investigation of machining and modified surface features of 316L steel through novel hybrid of HA/CNT added-EDM process. Materials Chemistry and Physics, 276.

Singh, S.K. and Mali, H.S. and Unune, D.R. and Abdul-Rani, A.M. and Wojciechowski, S. (2022) Material independent effectiveness of workpiece vibration in μ-EDM drilling. Journal of Materials Research and Technology, 18. pp. 531-546.

Danish, M. and Al-Amin, M. and Abdul-Rani, A.M. and Rubaiee, S. and Ahmed, A. and Zohura, F.T. and Ahmed, R. and Yildirim, M.B. (2022) Optimization of hydroxyapatite powder mixed electric discharge machining process to improve modified surface features of 316L stainless steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.

Danish, M. and Al-Amin, M. and Abdul-Rani, A.M. and Rubaiee, S. and Ahmed, A. and Zohura, F.T. and Ahmed, R. and Yildirim, M.B. (2022) Optimization of hydroxyapatite powder mixed electric discharge machining process to improve modified surface features of 316L stainless steel. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.

Zamzuri, A.N.A. and Razak, M.A.�H.A. and Abdullah, A. and Ab Kadir, A.R. and Abdul-Rani, A.M. and Azam, F.I. and Zaharin, H.A. (2022) Potential Experimental Analysis of Electrical Discharge Machine Process Parameters on Stainless Steel ANSI 304. Advanced Structured Materials, 169. pp. 15-22.

Shozib, I.A. and Ahmad, A. and Abdul-Rani, A.M. and Beheshti, M. and Aliyu, A.A. (2022) A review on the corrosion resistance of electroless Ni-P based composite coatings and electrochemical corrosion testing methods. Corrosion Reviews, 40 (1). pp. 1-37.

Shozib, I.A. and Ahmad, A. and Abdul-Rani, A.M. and Beheshti, M. and Aliyu, A.A. (2022) A review on the corrosion resistance of electroless Ni-P based composite coatings and electrochemical corrosion testing methods. Corrosion Reviews, 40 (1). pp. 1-37.

Shozib, I.A. and Ahmad, A. and Abdul-Rani, A.M. and Beheshti, M. and Aliyu, A.A. (2022) A review on the corrosion resistance of electroless Ni-P based composite coatings and electrochemical corrosion testing methods. Corrosion Reviews, 40 (1). pp. 1-37.

Al-Amin, M. and Abdul-Rani, A.M. and Danish, M. and Zohura, F.T. and Rubaiee, S. and Ahmed, R. and Ali, S. and Sarikaya, M. (2021) Analysis of hybrid HA/CNT suspended-EDM process and multiple-objectives optimization to improve machining responses of 316L steel. Journal of Materials Research and Technology, 15. pp. 2557-2574.

Al-Amin, M. and Abdul-Rani, A.M. and Danish, M. and Rubaiee, S. and Mahfouz, A.B. and Thompson, H.M. and Ali, S. and Unune, D.R. and Sulaiman, M.H. (2021) Investigation of coatings, corrosion and wear characteristics of machined biomaterials through hydroxyapatite mixed-edm process: A review. Materials, 14 (13).

Shozib, I.A. and Ahmad, A. and Rahaman, M.S.A. and Abdul-Rani, A.M. and Alam, M.A. and Beheshti, M. and Taufiqurrahman, I. (2021) Modelling and optimization of microhardness of electroless Ni-P-TiO2composite coating based on machine learning approaches and RSM. Journal of Materials Research and Technology, 12. pp. 1010-1025.

Al-Amin, M. and Abdul-Rani, A.M. and Ahmed, R. and Shahid, M.U. and Zohura, F.T. and Rani, M.D.B.A. (2021) Multi-objective optimization of process variables for MWCNT-added electro-discharge machining of 316L steel. International Journal of Advanced Manufacturing Technology, 115 (1-2). pp. 179-198.

Al-Amin, M. and Abdul-Rani, A.M. and Ahmed, R. and Shahid, M.U. and Zohura, F.T. and Rani, M.D.B.A. (2021) Multi-objective optimization of process variables for MWCNT-added electro-discharge machining of 316L steel. International Journal of Advanced Manufacturing Technology, 115 (1-2). pp. 179-198.

Al-Amin, M. and Abdul-Rani, A.M. and Ahmed, R. and Rao, T.V.V.L.N. (2021) Multiple-objective optimization of hydroxyapatite-added EDM technique for processing of 316L-steel. Materials and Manufacturing Processes, 36 (10). pp. 1134-1145.

Al-Amin, M. and Abdul-Rani, A.M. and Ahmed, R. and Rao, T.V.V.L.N. (2021) Multiple-objective optimization of hydroxyapatite-added EDM technique for processing of 316L-steel. Materials and Manufacturing Processes, 36 (10). pp. 1134-1145.

Al-Amin, M. and Abdul-Rani, A.M. and Danish, M. and Thompson, H.M. and Abdu Aliyu, A.A. and Hastuty, S. and Zohura, F.T. and Bryant, M.G. and Rubaiee, S. and Rao, T.V.V.L.N. (2020) Assessment of PM-EDM cycle factors influence on machining responses and surface properties of biomaterials: A comprehensive review. Precision Engineering, 66. pp. 531-549.

Al-Amin, M. and Abdul-Rani, A.M. and Danish, M. and Thompson, H.M. and Abdu Aliyu, A.A. and Hastuty, S. and Zohura, F.T. and Bryant, M.G. and Rubaiee, S. and Rao, T.V.V.L.N. (2020) Assessment of PM-EDM cycle factors influence on machining responses and surface properties of biomaterials: A comprehensive review. Precision Engineering, 66. pp. 531-549.

Aliyu, A.A. and Abdul-Rani, A.M. and Ginta, T.L. and Rao, T.V.V.L. and Axinte, E. and Ali, S. and Ramli, M.N. (2019) Hydroxyapatite electro discharge coating of Zr-based bulk metallic glass for potential orthopedic application. Key Engineering Materials, 796. pp. 123-128.

Aliyu, A.A. and Abdul-Rani, A.M. and Ginta, T.L. and Rao, T.V.V.L. and Axinte, E. and Ali, S. and Ramli, M.N. (2019) Hydroxyapatite electro discharge coating of Zr-based bulk metallic glass for potential orthopedic application. Key Engineering Materials, 796. pp. 123-128.

Aliyu, A.�A.A. and Abdul-Rani, A.M. and Ginta, T.L. and Prakash, C. and Rao, T.V.V.L.N. and Axinte, E. and Ali, S. (2019) Synthesis and characterization of bioceramic oxide coating on Zr-Ti-Cu-Ni-Be BMG by electro discharge process. Lecture Notes in Mechanical Engineering. pp. 518-531.

Aliyu, A.�A.A. and Abdul-Rani, A.M. and Ginta, T.L. and Prakash, C. and Rao, T.V.V.L.N. and Axinte, E. and Ali, S. (2019) Synthesis and characterization of bioceramic oxide coating on Zr-Ti-Cu-Ni-Be BMG by electro discharge process. Lecture Notes in Mechanical Engineering. pp. 518-531.

Aliyu, A.�A.A. and Abdul-Rani, A.M. and Ginta, T.L. and Prakash, C. and Rao, T.V.V.L.N. and Axinte, E. and Ali, S. (2019) Synthesis and characterization of bioceramic oxide coating on Zr-Ti-Cu-Ni-Be BMG by electro discharge process. Lecture Notes in Mechanical Engineering. pp. 518-531.

Aliyu, A.�A.A. and Abdul-Rani, A.M. and Ginta, T.L. and Prakash, C. and Rao, T.V.V.L.N. and Axinte, E. and Ali, S. (2019) Synthesis and characterization of bioceramic oxide coating on Zr-Ti-Cu-Ni-Be BMG by electro discharge process. Lecture Notes in Mechanical Engineering. pp. 518-531.

Abdul-Rani, A.M. and Sidid, A.A.B.C. and Ab Adzis, A.H. (2018) Study on the Effect of Diamond Grain Size on Wear of Polycrystalline Diamond Compact Cutter. IOP Conference Series: Materials Science and Engineering, 328 (1).

Abdul-Rani, A.M. and Krishnan, S. and Nagarajan, T. and Rao, T.V.V.L.N. and Ramiah, R. and Ambaraj, W. (2017) Early mobilization using heat treated shape memory alloy (sma) for rehabilitation phases. Key Engineering Materials, 724 KE. pp. 112-116.

Abdul-Rani, A.M. and Razak, M.A. and Littlefair, G. and Gibson, I. and Nanimina, A.M. (2017) Improving EDM Process on AZ31 Magnesium Alloy towards Sustainable Biodegradable Implant Manufacturing. Procedia Manufacturing, 7. pp. 504-509.

Abdul-Rani, A.M. and Krishnan, S. and Nagarajan, T. and Rao, T.V.V.L.N. (2017) Inverse kinematics-stewart platform actuated by shape memory alloy for immobilization of ankle-foot rehabilitation. Key Engineering Materials, 724 KE. pp. 105-111.

Abdul-Rani, A.M. and Nanimina, A.M. and Ginta, T.L. and Razak, M.A. (2017) Machined Surface Quality in Nano Aluminum Mixed Electrical Discharge Machining. Procedia Manufacturing, 7. pp. 510-517.

Abdul-Rani, A.M. and Nanimina, A.M. and Ginta, T.L. (2017) Surface morphology and corrosion behavior in nano pmedm. Key Engineering Materials, 724 KE. pp. 61-65.

Axinte, E. and Bofu, A. and Wang, Y. and Abdul-Rani, A.M. and Aliyu, A.A.A. (2017) An overview on the conventional and nonconventional methods for manufacturing the metallic glasses. MATEC Web of Conferences, 112.

Abdul-Rani, A.M. and Nanimina, A.M. and Ginta, T.L. and Rao, T.V.V.L.N. and Pedapati, S.R. (2016) Application of nano aluminum in modified EDM: pmedm. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12117-12121.

Alkali, A.U. and Ginta, T.L. and Abdul-Rani, A.M. (2015) Experimental investigation and 3D finite element prediction of temperature distribution during travelling heat sourced from oxyacetylene flame. In: UNSPECIFIED.

Alkali, A.U. and Ginta, T.L. and Abdul-Rani, A.M. (2014) Finite element modelling of a pattern of temperature distribution during travelling heat source from oxyacetylene flame. In: UNSPECIFIED.

Kamal, S. and Kumar, C.V. and Abdul-Rani, A.M. (2014) Hot corrosion studies in coal fired boiler environment. In: UNSPECIFIED.

Abdul-Rani, A.M. and Ismail, M.Z. and Zaky, M.A. and Noor, M.H.M. and Zhun, Y.Y. and Ganesan, K. and Rao, T.V.V.L.N. and Kamal, S. and Ginta, T.L. (2014) Improving rate of penetration for PDC drill bit using reverse engineering. Applied Mechanics and Materials, 607. pp. 153-160.

Nanimina, A.M. and Abdul-Rani, A.M. and Ahmad, F. and Zainuddin , A. and Lo, S.H.J. (2011) Effects of Electro-discharge Machining on Aluminium Metal Matrix Composite. [Citation Index Journal]