Items where Author is "Ahmad, A."

Group by: Item Type | No Grouping

Jump to: Article | Conference or Workshop Item | Book

Number of items: 123.

Article

Wang, P.S. and Ahmad, A. and Nazar, M. and Rahmah, A.U. and Moniruzzaman, M. (2023) Biocompatible and Biodegradable Surfactants from Orange Peel for Oil Spill Remediation. Molecules, 28 (15). ISSN 14203049

Ahmed, I. and Ahmad, A. and Abdul-Rani, A.M. and Tasnim, N. and Al-Amin, M. (2023) A Comparative Review of Surface Modification Technique Between Physical Vapor Deposition (PVD) and Plasma Electrolytic Oxidation (PEO) for Biomedical Applications. Lecture Notes in Mechanical Engineering. pp. 813-829. ISSN 21954356

Sithambaranathan, P. and Nasef, M.M. and Ahmad, A. and Abbasi, A. and Ting, T.M. (2023) Composite Proton-Conducting Membrane with Enhanced Phosphoric Acid Doping of Basic Films Radiochemically Grafted with Binary Vinyl Heterocyclic Monomer Mixtures. Membranes, 13 (1).

Yaro, N.S.A. and Sutanto, M.H. and Baloo, L. and Habib, N.Z. and Usman, A. and Yousafzai, A.K. and Ahmad, A. and Birniwa, A.H. and Jagaba, A.H. and Noor, A. (2023) A Comprehensive Overview of the Utilization of Recycled Waste Materials and Technologies in Asphalt Pavements: Towards Environmental and Sustainable Low-Carbon Roads. Processes, 11 (7). ISSN 22279717

Ahmad, A. and Mansor, N. and Mahmood, H. and Sharif, F. and Safdar, R. and Moniruzzaman, M. (2023) Evaluation thermal degradation kinetics of ionic liquid assisted polyetheretherketone-multiwalled carbon nanotubes composites. Journal of Applied Polymer Science.

Halim, F. and Ahmad, A. and Adil, M. and Khan, A. and Ghareeb, M. and Alzara, M. and Eldin, S.M. and Alsharari, F. and Yosri, A.M. (2023) Investigating the Retrofitting Effect of Fiber-Reinforced Plastic and Steel Mesh Casting on Unreinforced Masonry Walls. Materials, 16 (1). ISSN 19961944

Sabireen and Butt, F. and Ahmad, A. and Ullah, K. and Zaid, O. and Ahmed Shah, H. and Kamal, T. (2023) Mechanical performance of fiber-reinforced concrete and functionally graded concrete with natural and recycled aggregates. Ain Shams Engineering Journal.

Baharudin, B.A. and Mustapha, M. and Ismail, A. and Zulkipli, F.N. and Ayob, F. and Ahmad, A. (2023) Microhardness and Process Parameter Optimization of Friction Stir Welding on an AA5052 Thin Plate. Advanced Structured Materials, 165. pp. 133-141.

Ahmad, A. and Sutanto, M.H. and Ahmad, N.R. and Mohamad, M.E. and Bujang, M. (2023) Microstructural Characterization of Fibric Peat Stabilized with Portland Cement and Silica Fume. Materials, 16 (1).

Ahmad, A. and Pango, B. and Ismail, M. and Bustam, M.A. (2023) Performance Evaluation of the Developed MOF-177 for CO2 Capture. Journal of Advanced Research in Applied Mechanics, 111 (1). pp. 74-81.

Ahmad, A. and Abbas, A. and Hussain, G. and Al-Abbasi, O. and Alkahtani, M. and Altaf, K. (2023) Performance evaluation of 3D printed polymer heat exchangers: influence of printing temperature, printing speed and wall thickness with consideration of surface roughness. International Journal of Advanced Manufacturing Technology, 128 (7-8). pp. 3627-3647. ISSN 02683768

Baharudin, B.A. and Mustapha, M. and Ismail, A. and Zulkipli, F.N. and Ayob, F. and Ahmad, A. (2023) Residual Stress Optimization of Friction Stir Welding on an AA5052 Thin Plate. Advanced Structured Materials, 165. pp. 143-151.

Kari, N.E.F. and Ismail, M. and Ahmad, A. and Kamal, K. and Chew, T.L. and Bustam, M.A. (2023) Screening and Experimental Validation for Selection of Open Metal Sites Metal-Organic Framework (M-CPO-27, M = Co, Mg, Ni and Zn) to Capture CO2. Separations, 10 (8). ISSN 22978739

Chohan, I.M. and Ahmad, A. and Sallih, N. and Bheel, N. and Ali, M. and Deifalla, A.F. (2023) A review on life cycle assessment of different pipeline materials. Results in Engineering, 19. ISSN 25901230

Othman, N.H. and Mustapha, M. and Sallih, N. and Ahmad, A. and Mustapha, F. and Ismail, M.C. (2022) The Effect of Residual Solvent in Carbonâ��Based Filler Reinforced Polymer Coating on the Curing Properties, Mechanical and Corrosive Behaviour. Materials, 15 (10).

Ahmad, A. and Mansor, N. and Mahmood, H. and Iqbal, T. and Moniruzzaman, M. (2022) Effect of ionic liquids on thermomechanical properties of polyetheretherketone-multiwalled carbon nanotubes nanocomposites. Journal of Applied Polymer Science, 139 (11).

Zakaria, M.S. and Mustapha, M. and Azmi, A.I. and Ahmad, A. and Ismail, S.O. and Shuaib, N.A. (2022) Effects of submerged convective cooling in the turning of AZ31 magnesium alloy for tool temperature and wear improvement. International Journal of Advanced Manufacturing Technology.

Oyekanmi, A.A. and Alshammari, M.B. and Mohamad Ibrahim, M.N. and Hanafiah, M.M. and Elnaggar, A.Y. and Ahmad, A. and Oyediran, A.T. and Rosli, M.A. and Setapar, S.H.M. and Daud, N.N.N. and Hussein, E.E. (2022) Highly Effective Cow Bone Based Biocomposite for the Sequestration of Organic Pollutant Parameter from Palm Oil Mill Effluent in a Fixed Bed Column Adsorption System. Polymers, 14 (1).

Khan, M. and Ali, U. and Khan, N. and Hussain, S. and Ahmad, A. (2022) Hydraulic Model for Flood Forecasting of Tajabad Khwar in Hayatabad Phase III Peshawar, Pakistan: A Case Study. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 89 (1). pp. 160-174.

Nazar, M. and Shah, M.U.H. and Ahmad, A. and Yahya, W.Z.N. and Goto, M. and Moniruzzaman, M. (2022) Ionic Liquid and Tween-80 Mixture as an Effective Dispersant for Oil Spills: Toxicity, Biodegradability, and Optimization. ACS Omega.

Mohamad, M.E. and Ahmad, A. and Sadon, H.B. and Sutanto, M.H. and Bujang, M. and Kifli, A.B.Z. and Mohamad, S.N.A. (2022) Peat Stabilization Using Waste Crumb Rubber Tire. Civil Engineering and Architecture, 10 (7). pp. 3253-3263.

Ghanim, A.A.J. and Beddu, S. and Abd Manan, T.S.B. and Al Yami, S.H. and Irfan, M. and Mursal, S.N.F. and Mohd Kamal, N.L. and Mohamad, D. and Machmudah, A. and Yavari, S. and Mohtar, W.H.M.W. and Ahmad, A. and Rasdi, N.W. and Khan, T. (2022) Prediction of Runoff in Watersheds Located within Data-Scarce Regions. Sustainability (Switzerland), 14 (13).

Abdullah, M.J. and Beddu, S. and Manan, T.S.B.A. and Syamsir, A. and Naganathan, S. and Mohd Kamal, N.L. and Mohamad, D. and Itam, Z. and Yee+, H.M. and Mohd Yapandi, M.F.K. and Mohamed Nazri, F. and Shafiq, N. and Isa, M.H. and Ahmad, A. and Wan Rasdi, N. (2022) The Strength and Thermal Properties of Concrete containing Water Absorptive Aggregate from Well-Graded Bottom Ash (BA) as Partial Sand Replacement. Construction and Building Materials, 339.

Ullah, K. and Irshad Qureshi, M. and Ahmad, A. and Ullah, Z. (2022) Substitution potential of plastic fine aggregate in concrete for sustainable production. Structures, 35. pp. 622-637.

Taufiqurrahman, I. and Ginta, T.L. and Ahmad, A. and Mustapha, M. and Fatmahardi, I. and Shozib, I.A. (2022) The effect of aluminum interlayer on weld strength, microstructure analysis, and welding parameters optimization in resistance spot welding of stainless steel 316L and Ti6Al4V titanium alloy. Engineering Solid Mechanics, 10 (2). pp. 165-178.

Shozib, I.A. and Ahmad, A. and Abdul-Rani, A.M. and Beheshti, M. and Aliyu, A.A. (2022) A review on the corrosion resistance of electroless Ni-P based composite coatings and electrochemical corrosion testing methods. Corrosion Reviews, 40 (1). pp. 1-37.

Abd Manan, T.S.B. and Khan, T. and Wan Mohtar, W.H.M. and Beddu, S. and Qazi, S. and Sheikh Khozani, Z. and Mohd Kamal, N.L. and Sarwono, A. and Jusoh, H. and Yavari, S. and Mustafa, S.F.Z. and Hanafiah, Z. and Mohd Zaid, H.F. and Machmudah, A. and Isa, M.H. and Ahmad, A. and Ghanim, A.A.J. (2021) Ecological and health risk assessment of polycyclic aromatic hydrocarbons (PAHs) in Sungai Perak, Malaysia. Journal of Cleaner Production, 294.

Abd Manan, T.S.B. and Beddu, S. and Mohd Kamal, N.L. and Mohamad, D. and Itam, Z. and Khan, T. and Machmudah, A. and Dutykh, D. and Mohtar, W.H.M.W. and Jusoh, H. and Nazri, F.M. and Yapandi, M.F.K.M. and Pati, S. and Ahmad, A. and Rasdi, N.W. (2021) Ecological risk indicators for leached heavy metals from coal ash generated at a malaysian power plant. Sustainability (Switzerland), 13 (18).

Ruhaizat, N.E. and Yusuf, N.K. and Lajis, M.A. and Mazlan, A.K. and Muktari, A.A. and Ahmad, A. (2021) Effect of Hot Press Forging Parameter on Microstructural Analysis and Mechanical Properties in Direct Recycling of Aluminium Aircraft Alloy (AA7075). Lecture Notes in Mechanical Engineering, 46. pp. 279-288.

Alani, S. and Zakaria, Z. and Saeidi, T. and Ahmad, A. and Alsariera, H. and Al-Heety, O.S. and Mahmood, S.N. (2021) Electronic bandgap miniaturized UWB antenna for near-field microwave investigation of skin. AIP Advances, 11 (3).

Vijaya Bhaskar Reddy, A. and Madhavi, V. and Ahmad, A. and Madhavi, G. (2021) Heavy metals removal using carbon based nanocomposites: Heavy metals adsorption by cbns. Green Energy and Technology. pp. 249-274.

Khalili, N.F.M. and Jun, H.J. and Ahmad, A. and Sallih, N. and Lajis, M.A. and Shamsudin, S. (2021) The Investigation of Hot Extrusion Process Parameters on Microstructure and Mechanical Performance of Aluminium Alloy in Biomedical Industry. Lecture Notes in Mechanical Engineering. pp. 327-332.

Ahmad, A. and Mahmood, H. and Mansor, N. and Iqbal, T. and Moniruzzaman, M. (2021) Ionic liquid assisted polyetheretherketone-multiwalled carbon nanotubes nanocomposites: An environmentally friendly approach. Journal of Applied Polymer Science, 138 (14).

Alani, S. and Zakaria, Z. and Saeidi, T. and Ahmad, A. and Imran, M.A. and Abbasi, Q.H. (2021) Microwave imaging of breast skin utilizing elliptical uwb antenna and reverse problems algorithm. Micromachines, 12 (6).

Shozib, I.A. and Ahmad, A. and Rahaman, M.S.A. and Abdul-Rani, A.M. and Alam, M.A. and Beheshti, M. and Taufiqurrahman, I. (2021) Modelling and optimization of microhardness of electroless Ni-P-TiO2composite coating based on machine learning approaches and RSM. Journal of Materials Research and Technology, 12. pp. 1010-1025.

Ahmad, A. and Sakidin, H. and Sari, M.Y.A. and Amin, A.R.M. and Sufahani, S.F. and Rasib, A.W. (2021) NaÃ¯ve Bayes Classification of High-Resolution Aerial Imagery. International Journal of Advanced Computer Science and Applications, 12 (11). pp. 168-177.

Abd Manan, T.S.B. and Beddu, S. and Mohamad, D. and Mohd Kamal, N.L. and Wan Mohtar, W.H.M. and Khan, T. and Jusoh, H. and Sarwono, A. and Ali, M.M. and Che Muda, Z. and Mohamed Nazri, F. and Isa, M.H. and Ghanim, A.A.J. and Ahmad, A. and Wan Rasdi, N. and Basri, N.A.N. (2021) Physicochemical and leaching properties of coal ashes from Malaysian coal power plant. Chemical Physics Letters, 769.

Abd Manan, T.S.B. and Beddu, S. and Mohamad, D. and Mohd Kamal, N.L. and Itam, Z. and Khan, T. and Jusoh, H. and Abdul Rahman, N.A. and Mohamed Nazri, F. and Mohd Yapandi, M.F.K. and Wan Mohtar, W.H.M. and Isa, M.H. and Che Muda, Z. and Ahmad, A. and Wan Rasdi, N. (2021) Physicochemical properties of absorbent hydrogel polymers in disposable baby diapers. Chemical Physics Letters, 774.

Ahmad, A. and Sutanto, M.H. and Al-Bared, M.A.M. and Harahap, I.S.H. and Abad, S.V.A.N.K. and Khan, M.A. (2021) Physio-Chemical Properties, Consolidation, and Stabilization of Tropical Peat Soil Using Traditional Soil Additives â�� A State of the Art Literature Review. KSCE Journal of Civil Engineering.

Abdullah, M.N. and Mustapha, M. and Sallih, N. and Ahmad, A. and Mustapha, F. and Dahliyanti, A. (2021) Study and use of rice husk ash as a source of aluminosilicate in refractory coating. Materials, 14 (13).

Ullah, Z. and Qureshi, M.I. and Ahmad, A. and Khan, S.U. and Javaid, M.F. (2021) An experimental study on the mechanical and durability properties assessment of E-waste concrete. Journal of Building Engineering, 38.

Ahmad, A. and Sutanto, M.H. and Ahmad, N.R.B. and Bujang, M. and Mohamad, M.E. (2021) The implementation of industrial byproduct in malaysian peat improvement: A sustainable soil stabilization approach. Materials, 14 (23).

Al-Amin, M. and Abdul Rani, A.M. and Abdu Aliyu, A.A. and Bryant, M.G. and Danish, M. and Ahmad, A. (2020) Bio-ceramic coatings adhesion and roughness of biomaterials through PM-EDM: a comprehensive review. Materials and Manufacturing Processes. pp. 1157-1180.

Sheikh, N.A. and Ching, D.L.C. and Khan, I. and Ahmad, A. and Ammad, S. (2020) Concrete based jeffrey nanofluid containing zinc oxide nanostructures: Application in cement industry. Symmetry, 12 (6).

Khan, R. and Ya, H.H. and Pao, W. and Majid, M.A.A. and Ahmed, T. and Ahmad, A. and Alam, M.A. and Azeem, M. and Iftikhar, H. (2020) Effect of sand fines concentration on the erosion-corrosion mechanism of carbon steel 90â�¦ elbow pipe in slug flow. Materials, 13 (20). pp. 1-16.

Hussain, K. and Zhu, W. and Salleh, M.N.M. and Ali, H. and Talpur, N. and Naseem, R. and Ahmad, A. and Ullah, A. (2020) Enhanced Bat Algorithm for Solving Non-Convex Economic Dispatch Problem. Advances in Intelligent Systems and Computing, 978 AI. pp. 419-428.

Ahmad, A. and Sakidin, H. and Dahlia, A. and Zetriuslita and Qudsi, R. (2020) Haze and its impact to paddy monitoring from remote sensing satellites. International Journal of Advanced Trends in Computer Science and Engineering, 9 (4). pp. 4939-4946.

Hubadillah, S.K. and Othman, M.H.D. and Tai, Z.S. and Jamalludin, M.R. and Yusuf, N.K. and Ahmad, A. and Rahman, M.A. and Jaafar, J. and Kadir, S.H.S.A. and Harun, Z. (2020) Novel hydroxyapatite-based bio-ceramic hollow fiber membrane derived from waste cow bone for textile wastewater treatment. Chemical Engineering Journal, 379.

Nallappan, M.L. and Nasef, M.M. and Ting, T.M. and Ahmad, A. (2019) Breakthrough modelling of glucamine functionalized PVDF nanofibrous adsorbent in a fixed-bed column for separation of boron from water. Desalination and Water Treatment, 162. pp. 134-141.

Al-Homery, H.A. and Ashari, H. and Ahmad, A. (2019) Enhancing customer and supplier relationship through the iterative customer relationship management process. International Journal of Supply Chain Management, 8 (6). pp. 967-977.

Abouzari-Lotf, E. and Zakeri, M. and Nasef, M.M. and Miyake, M. and Mozarmnia, P. and Bazilah, N.A. and Emelin, N.F. and Ahmad, A. (2019) Highly durable polybenzimidazole composite membranes with phosphonated graphene oxide for high temperature polymer electrolyte membrane fuel cells. Journal of Power Sources. pp. 238-245.

Ahmad, A. and Hashim, U.K.M. and Abd Wahid, R. and Sakidin, H. and Sufahani, S.F. and Amin, A.R.M. and Abdullah, M.M. and Quegan, S. (2019) Implementation of land cover change detection based on supervised classifications of multispectral satellite data for leveraging Internet of Things. International Journal of GEOMATE, 17 (59). pp. 1863-1870.

Ahmad, A. and Hashim, U.K.M. and Abd Wahid, R. and Sakidin, H. and Sufahani, S.F. and Amin, A.R.M. and Abdullah, M.M. and Quegan, S. (2019) Implementation of land cover change detection based on supervised classifications of multispectral satellite data for leveraging internet of things. ARPN Journal of Engineering and Applied Sciences, 14 (10). pp. 1863-1870.

Hashim, U.K.M. and Ahmad, A. and Sakidin, H. and Sufahani, S.F. and Amin, A.R.B.M. (2019) Monitoring land cover changes in the tropics using satellite remote sensing data. International Journal of Innovative Technology and Exploring Engineering, 8 (12). pp. 3631-3636.

Nallappan, M.L. and Nasef, M.M. and Ting, T.M. and Ahmad, A. (2019) Removal of boron from aqueous solutions using electrospun PVDF nanofibrous adsorbent modified by poly(Glycidyl methacrylate)/glucamine ligands. Desalination and Water Treatment, 140. pp. 163-171.

Ahmad, A. and Bhat, A.H. and Buang, A. (2018) Biosorption of transition metals by freely suspended and Ca-alginate immobilised with Chlorella vulgaris: Kinetic and equilibrium modeling. Journal of Cleaner Production, 171. pp. 1361-1375.

Ahmad, A. and Lajis, M.A. and Shamsudin, S. and Yusuf, N.K. (2018) Conjectured the behaviour of a recycled metal matrix composite (MMC-AlR) developed through hot press forging by means of 3D FEM simulation. Materials, 11 (6).

Ahmad, A. and Bhat, A.H. and Buang, A. (2018) Enhanced biosorption of transition metals by living Chlorella vulgaris immobilized in Ca-alginate beads. Environmental Technology (United Kingdom). pp. 1-17.

Zakeri, M. and Abouzari-Lotf, E. and Nasef, M.M. and Ahmad, A. and Miyake, M. and Ting, T.M. and Sithambaranathan, P. (2018) Fabrication and characterization of supported dual acidic ionic liquids for polymer electrolyte membrane fuel cell applications. Arabian Journal of Chemistry.

Etesami, M. and Abouzari-Lotf, E. and Ripin, A. and Mahmoud Nasef, M. and Ting, T.M. and Saharkhiz, A. and Ahmad, A. (2018) Phosphonated graphene oxide with high electrocatalytic performance for vanadium redox flow battery. International Journal of Hydrogen Energy, 43 (1). pp. 189-197.

Zakeri, M. and Abouzari-Lotf, E. and Nasef, M.M. and Ahmad, A. and Ripin, A. and Ting, T.M. and Sithambaranathan, P. (2018) Preparation and characterization of highly stable protic-ionic-liquid membranes. International Journal of Hydrogen Energy.

Bahari, N.I.S. and Ahmad, A. and Aboobaider, B. and Bin Razali, M.F. and Sakidin, H. and Isa, M.S.M. and Ananta, G.P. and Sari, Y.A. and Sari, N.A. (2018) Remote sensing data restoration to compensate for haze effect. Journal of Theoretical and Applied Information Technology, 96 (1). pp. 118-126.

Ghasemi, M. and Ahmad, A. and Jafary, T. and Azad, A.K. and Kakooei, S. and Wan Daud, W.R. and Sedighi, M. (2017) Assessment of immobilized cell reactor and microbial fuel cell for simultaneous cheese whey treatment and lactic acid/electricity production. International Journal of Hydrogen Energy, 42 (14). pp. 9107-9115.

Andarany, K.S. and Sagir, A. and Ahmad, A. and Deni, S.K. and Gunawan, W. (2017) Cellulose acetate layer effect toward aluminium corrosion rate in hydrochloric acid media. IOP Conference Series: Materials Science and Engineering, 237 (1).

Ahmad, A. and Bhat, A.H. and Buang, A. (2017) Immobilized chlorella vulgaris for efficient palm oil mill effluent treatment and heavy metals removal. Desalination and Water Treatment, 81. pp. 105-117.

Moayedfar, M. and Rani, A.M. and Hanaei, H. and Ahmad, A. and Tale, A. (2017) Parameter optimization and stretch enhancement of AISI 316 sheet using rapid prototyping technique. IOP Conference Series: Materials Science and Engineering, 257 (1).

Abouzari-Lotf, E. and Ghassemi, H. and Nasef, M.M. and Ahmad, A. and Zakeri, M. and Ting, T.M. and Abbasi, A. and Mehdipour-Ataei, S. (2017) Phase separated nanofibrous anion exchange membranes with polycationic side chains. Journal of Materials Chemistry A, 5 (29). pp. 15326-15341.

Ahmad, A. and Shah, S.M.U. and Buang, A. and Abdullah, M.A. (2016) Anaerobic co-cultivation of multi-algal species with oil palm empty fruit bunches for mill effluent treatment and biomethane production. Jurnal Teknologi, 78 (5-6). pp. 65-73.

Hashim, U.K.M. and Ahmad, A. and Aboobaider, B.M. and Sakidin, H. and Subatira, B. and Isa, M.S.M. (2016) Change detection from Landsat-5 TM Satellite data. ARPN Journal of Engineering and Applied Sciences, 11 (17). pp. 10234-10238.

Abdullah, M.A. and Ahmad, A. and Shah, S.M.U. and Shanab, S.M.M. and Ali, H.E.A. and Abo-State, M.A.M. and Othman, M.F. (2016) Integrated algal engineering for bioenergy generation, effluent remediation, and production of high-value bioactive compounds. Biotechnology and Bioprocess Engineering, 21 (2). pp. 236-249.

Yadzir, Z.H.M. and Shukor, M.Y. and Ahmad, A. and Nazir, M.S. and Shah, S.M.U. and Abdullah, M.A. (2016) Phenol removal by newly isolated Acinetobacter baumannii strain Serdang 1 in a packed-bed column reactor. Desalination and Water Treatment, 57 (28). pp. 13307-13317.

Ahmad, A. and Buang, A. and Bhat, A.H. (2016) Renewable and sustainable bioenergy production from microalgal co-cultivation with palm oil mill effluent (POME): A review. Renewable and Sustainable Energy Reviews, 65. pp. 214-234.

Saiful Bahari, N.i. and Ahmad, A. and Aboobaider, B.M. and Razali, M.F. and Sakidin, H. and Mohamad Isa, M.S. (2016) Restoration of hazy data based on spectral and statistical methods. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 6807-6813.

Ahmad, A. and Shah, S.M.U. and Othman, M.F. and Abdullah, M.A. (2015) Aerobic and anaerobic co-cultivation of Nannochloropsis oculata with oil palm empty fruit bunch for enhanced biomethane production and palm oil mill effluent treatment. Desalination and Water Treatment, 56 (8). pp. 2055-2065.

Abdullah, M.A. and Afzaal, M. and Ismail, Z. and Ahmad, A. and Nazir, M.S. and Bhat, A.H. (2015) Comparative study on structural modification of Ceiba pentandra for oil sorption and palm oil mill effluent treatment. Desalination and Water Treatment, 54 (11). pp. 3044-3053.

Javaid, N. and Ahmad, A. and Nadeem, Q. and Imran, M. and Haider, N. (2015) iM-SIMPLE: iMproved stable increased-throughput multi-hop link efficient routing protocol for Wireless Body Area Networks. Computers in Human Behavior, 51. pp. 1003-1011.

Ahmad, A. and Shah, S.M.U. and Othman, M.F. and Abdullah, M.A. (2014) Biomethane production and palm oil mill effluent treatment by co-cultivation of Nannochloropsis oculata. Applied Mechanics and Materials, 625. pp. 818-821.

Ahmad, A. and Shah, S.M.U. and Othman, M.F. and Abdullah, M.A. (2014) Enhanced palm oil mill effluent treatment and biomethane production by co-digestion of oil palm empty fruit bunches with Chlorella Sp. Canadian Journal of Chemical Engineering, 92 (9). pp. 1636-1642.

Hussain, S. and Aziz, H.A. and Isa, M.H. and Ahmad, A. and Van Leeuwen, J. and Zou, L. and Beecham, S. and Umar, M. (2011) Orthophosphate Removal from domestic wastewater using limestone and granular activated carbon. Desalination, 271 (1-3). pp. 265-272. ISSN 00119164

Conference or Workshop Item

Yaro, N.S.A. and Napiah, M. and Sutanto, M.H. and Usman, A. and Jagaba, A.H. and Mani, A.U. and Ahmad, A. (2022) Geopolymer utilization in the pavement industry - An overview. In: UNSPECIFIED.

Alam, M.A. and Ya, H.H. and Ahmad, A. and Yusuf, M. and Azeem, M. and Masood, F. (2021) Influence of aluminum addition on the mechanical properties of brass/Al composites fabricated by stir casting. In: UNSPECIFIED.

Ahmad, A. and Mahmood, H. and Mansor, N. and Iqbal, T. and Moniruzzaman, M. (2021) Ionic liquid modified PEEK-MWCNTs nanocomposites with enhanced thermomechanical properties. In: UNSPECIFIED.

Asri, N.A.M. and Sakidin, H. and Othman, M. and Matori, A.N. and Ahmad, A. (2020) Analysis of the hydrocarbon seepage detection in oil palm vegetation stress using unmanned aerial vehicle (UAV) multispectral data. In: UNSPECIFIED.

Mohamad, N.A. and Zubair, N.A. and Lotf, E.A. and Nasef, M.M. and Ahmad, A. and Ali, R.R. and Abdullah, T.A.T. and Ting, T.M. (2020) Effect of ligand type on CO2 adsorption over amine functionalized fibrous adsorbents. In: UNSPECIFIED.

Mohamad, N.A. and Zubair, N.A. and Lotf, E.A. and Nasef, M.M. and Ahmad, A. and Ali, R.R. and Abdullah, T.A.T. and Ting, T.M. (2020) Effect of monoethanolamine concentration on CO2 capture by poly (chloromethyl styrene) grafted fibrous adsorbent. In: UNSPECIFIED.

Ahmad, A. and Sutanto, M.H. and Harahap, I.S.H. and Al-Bared, M.A.M. and Khan, M.A. (2020) Feasibility of Demolished Concrete and Scraped Tires in Peat Stabilization - A Review on the Sustainable approach in Stabilization. In: UNSPECIFIED.

Zubair, N.A. and Nasef, M.M. and Ting, T.M. and Abdullah, E.C. and Ahmad, A. (2020) Radiation induced graft copolymerization of amine-containing monomer onto polyethylene coated propylene for CO2 adsorption. In: UNSPECIFIED.

Alani, S. and Zakaria, Z. and Saiedi, T. and Ahmad, A. and Mahmood, S.N. and Saad, M.A. and Rashid, S.A. and Hamdi, M.M. and Albeyar, M.A.A.A. (2020) A Review on UWB Antenna Sensor for Wireless Body Area Networks. In: UNSPECIFIED.

Rehman, W.U. and Mercian, Z.M.A. and Bhat, A.H. and Guan, B.H. and Sulaimon, A.A. and Khan, I.U. and Ullah, H. and Mukhtar, A. and Saqib, S. and Hameed, A. and Yasir, M. and Ahmad, A. (2020) Synthesis and Enhancement of Thermal Conductivity of Surfactant Free MWCNTs-Jatropha Oil-based Nanofluid. In: UNSPECIFIED.

Batcha, S.R. and Sakidin, H. and Ahmad, A. (2016) Simpler Neill mapping function using nonlinear curve fitting method. In: UNSPECIFIED.

Sakidin, H. and Batcha, S.R. and Ahmad, A. (2016) Simpler component of non-hydrostatic UNBabc mapping function using nonlinear curve fitting method. In: UNSPECIFIED.

Batcha, S.R. and Sakidin, H. and Ahmad, A. (2016) Simpler hydrostatics component of UNBabc mapping function using nonlinear curve fitting method. In: UNSPECIFIED.

Book

Abd Manan, T.S.B. and Khan, T. and Wan Mohtar, W.H.M. and Mohd Hanafiah, Z. and Latip, A.S.A. and Mustafa, S.F.Z. and Leong, S.Y. and Shamsuddin, A.S. and Isa, M.H. and Hassan, A.K.R. and Ahmad, A. and Wan Rasdi, N. and Mohamad, H. (2022) Algae in medicine and human health. Elsevier, pp. 323-334. ISBN 9780323904766

Abd Manan, T.S.B. and Khan, T. and Wan Mohtar, W.H.M. and Machmudah, A. and Dutykh, D. and Qazi, S. and Ahmad, A. and Wan Rasdi, N. (2022) Bioremediation of wastewater using algae for potential renewable bioenergy cogeneration. Elsevier, pp. 47-62. ISBN 9780323904766

Reddy, A.V.B. and Shah, M.U.H. and Ahmad, A. and Moniruzzaman, M. (2021) Introduction to ionic liquids and their environment-friendly applications. Elsevier, pp. 1-15.

Jawaid, M. and Ahmad, A. and Reddy, A.V.B. (2021) Ionic Liquid-Based Technologies for Environmental Sustainability. Elsevier, pp. 1-402.

Reddy, A.V.B. and Ahmad, A. and Jawaid, M. (2021) Preface. Elsevier, xvii-xvii.

Abdullah, M.A. and Shah, S.M.U. and Ahmad, A. and El-Sayed, H. (2014) Algal biotechnology for bioenergy, environmental remediation and high-value biochemicals. Apple Academic Press, pp. 301-344.

Bhat, A.H. and Dasan, Y.K. and Haque, I.U. and Ahmad, A. (2014) Potential applications and adverse effects of bisphenol a in humans. Nova Science Publishers, Inc., pp. 13-31.

This list was generated on Sun Dec 1 16:30:18 2024 +08.