Items where Author is "Ahmed, I."

Article

Ahmed, I. and Ahmad, A. and Abdul-Rani, A.M. and Tasnim, N. and Al-Amin, M. (2023) A Comparative Review of Surface Modification Technique Between Physical Vapor Deposition (PVD) and Plasma Electrolytic Oxidation (PEO) for Biomedical Applications. Lecture Notes in Mechanical Engineering. pp. 813-829. ISSN 21954356

Khan, M.S. and Lal, B. and Abulkhair, H. and Ahmed, I. and Shariff, A.M. and Almatrafi, E. and Alsaiari, A. and Bamaga, O. (2023) Formation Kinetics Evaluation for Designing Sustainable Carbon Dioxide-Based Hydrate Desalination via Tryptophan as a Biodegradable Hydrate Promotor. Sustainability (Switzerland), 15 (1).

Kumar, A. and Bheel, N. and Ahmed, I. and Rizvi, S.H. and Kumar, R. and Jhatial, A.A. (2022) Effect of silica fume and fly ash as cementitious material on hardened properties and embodied carbon of roller compacted concrete. Environmental Science and Pollution Research, 29 (1). pp. 1210-1222.

Awad, A. and Ahmed, I. and Qadir, D. and Khan, M.S. and Idris, A. (2021) Catalytic decomposition of 2 methanol in methane over metallic catalyst by fixed-bed catalytic reactor. Energies, 14 (8).

Khan, M.S. and Bavoh, C.B. and Foo, K.S. and Shariff, A.M. and Kassim, Z. and Othman, N.A.B. and Lal, B. and Ahmed, I. and Rahman, M.A. and Gomari, S.R. (2021) Kinetic behavior of quaternary ammonium hydroxides in mixed methane and carbon dioxide hydrates. Molecules, 26 (2).

Khan, M.S. and Lal, B. and Keong, L.K. and Ahmed, I. (2019) Tetramethyl ammonium chloride as dual functional inhibitor for methane and carbon dioxide hydrates. Fuel, 236. pp. 251-263.

Khan, M.S. and Ahmed, I. and Lal, B. and Idris, A.-A. and Albeirutty, M.H. and Ayoub, M. and Sufian, S.B. (2018) Physicochemical and FTIR Study of Diesel-Hydrogen Peroxide Fuel Blend. IOP Conference Series: Materials Science and Engineering, 344 (1).

Khan, M.S. and Ahmed, I. and Lal, B. and Idris, A.-A. and Albeirutty, M.H. and Ayoub, M. and Sufian, S.B. (2018) Physicochemical and FTIR Study of Diesel-Hydrogen Peroxide Fuel Blend. IOP Conference Series: Materials Science and Engineering, 344 (1).

Hussain, A. and Abolaban, F. and Khubaib, S.M. and Mubin, S. and Ahmed, I. (2015) Steady state and transient thermalhydraulic analysis of PHWR using COBRA-3C/RERTR. Iranian Journal of Science and Technology - Transactions of Mechanical Engineering, 39. pp. 233-242.

Hussain, A. and Abolaban, F. and Khubaib, S.M. and Mubin, S. and Ahmed, I. (2015) Steady state and transient thermalhydraulic analysis of PHWR using COBRA-3C/RERTR. Iranian Journal of Science and Technology - Transactions of Mechanical Engineering, 39. pp. 233-242.

Yusof, Z.A.M. and Ahmed, I. and Khan, M.S. and Hussain, S.A. and Hussain, A. and Mutalib, I.B.A. and Balkhair, K.S. and Albeirutty, M.H. (2015) Thermal Evaluation of Diesel/Hydrogen Peroxide Fuel Blend. Chemical Engineering and Technology, 38 (12). pp. 2170-2180.

Nadeem, S. and Ahmed, I. and Abdul Muttalib, I. and Tufail, M. and Khan, M.S. (2014) Citric acid future prospects for Pakistan, a short review. Applied Mechanics and Materials, 625. pp. 61-64.

Ahmed, I. and Idris, A. and Khan, M.S. and Chowdhury, S. and Akhtar, J. (2014) Effect of acetone on physical properties of PES membrane. Applied Mechanics and Materials, 625. pp. 545-548.

Chowdhury, S. and Leng, T.W. and Ahmed, I. and Bustam, A. and Shariff, A.M. (2014) Fine structural analysis of solvent activated Cu-BTC for carbon dioxide capture. Applied Mechanics and Materials, 625. pp. 209-212.

Ahmed, I. (2014) Preface. Applied Mechanics and Materials, 625.

Kazimi, M.R. and Shah, T. and Jamari, S.S.B. and Ahmed, I. and Faizal, C.K.M. (2014) Sulfonation of low-density polyethylene and its impact on polymer properties. Polymer Engineering and Science, 54 (11). pp. 2522-2530.

Hussain, A. and Ahmed, I. and Sait, H.H. and Bassyouni, M.I. and Hegab, A.M. and Ul Hasan, S.W. and Nasir Ani, F. (2013) Experimental and simulation study of fluidization behavior of palm biomass in a circulating fluidized bed riser. Industrial and Engineering Chemistry Research, 52 (49). pp. 17529-17537.

Ahmed, I. and Idris, A. and Hussain, A. and Yusof, Z.A.M. and Saad Khan, M. (2013) Influence of co-solvent concentration on the properties of dope solution and performance of polyethersulfone membranes. Chemical Engineering and Technology, 36 (10). pp. 1683-1690.

Book

Leam, J.J. and Bilad, M.R. and Wibisono, Y. and Wirzal, M.D.H. and Ahmed, I. (2019) Membrane technology for microalgae harvesting. Elsevier, pp. 97-110.