Items where Author is "Hussain, P."

Group by: Item Type | No Grouping

Jump to: Article | Conference or Workshop Item | Citation Index Journal

Number of items: 32.

Article

Ismail, A. and Alâ��Hapis Abdul Razak, M. and Mustapha, M. and Zaki Abdullah, M. and Hussain, P. and Mohamed Saat, A. and Ayub, F. and Muaz bin Mohd Faisal, M. (2023) Optimisation of Fe-Al Diffusion Bonding in Air. Lecture Notes in Mechanical Engineering. pp. 955-964.

Baharudin, B.A. and Hussain, P. and Mustapha, M. and Ayob, F. and Ismail, A. and Ab Rahman, F. and Khalid, P.Z.M. and Hamid, D.A. and Rojan, M.A. (2020) Tensile Properties of Diffusion Bonded Duplex Stainless Steel to Low Carbon Steel. Lecture Notes in Mechanical Engineering. pp. 333-338.

Emamian, S. and Awang, M. and Yusof, F. and Hussain, P. and Meyghani, B. and Zafar, A. (2019) The Effect of Pin Profiles and Process Parameters on Temperature and Tensile Strength in Friction Stir Welding of AL6061 Alloy. Lecture Notes in Mechanical Engineering. pp. 15-37.

Ali, S. and Abdul Rani, A.M. and Altaf, K. and Hussain, P. and Prakash, C. and Hastuty, S. and Rao, T.V.V.L.N. and Aliyu, A.â��A.A. and Subramaniam, K. (2019) Investigation of alloy composition and sintering parameters on the corrosion resistance and microhardness of 316L stainless steel alloy. Lecture Notes in Mechanical Engineering. pp. 532-541. ISSN 21954356

Puspitasari, W.C. and Ahmad, F. and Ullah, S. and Hussain, P. and Megat-Yusoff, P.S.M. and Masset, P.J. (2019) The study of adhesion between steel substrate, primer, and char of intumescent fire retardant coating. Progress in Organic Coatings, 127. pp. 181-193.

Ayob, F. and Hussain, P. and Awang, M. and Zoolfakar, M.R. and Abdullah, A. and Baharudin, B.A. and Abdul Rahim, A.A. (2018) Effect of post heat treatment on the microstructure and microhardness of diffusion coupled gray cast iron and low carbon steel. IOP Conference Series: Materials Science and Engineering, 328 (1).

Emamian, S. and Hussain, P. and Awang, M. and Arumugam, T. and Yusof, F. and Saheed, M.S.M. and Mohamed, N.M. (2017) Comparison of carbon-based nanomaterials characteristics on H13 tool steel: Vergleich der Eigenschaften Kohlenstoff-basierter Nanomaterialien auf H13 Werkzeugstahl. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 198-204.

Hazwani Dzulkafli, H. and Ahmad, F. and Ullah, S. and Hussain, P. and Mamat, O. and Megat-Yusoff, P.S.M. (2017) Effects of talc on fire retarding, thermal degradation and water resistance of intumescent coating. Applied Clay Science, 146. pp. 350-361.

Emamian, S. and Awang, M. and Yusof, F. and Hussain, P. and Mehrpouya, M. and Kakooei, S. and Moayedfar, M. and Zafar, A. (2017) A review of friction stir welding pin profile. Lecture Notes in Mechanical Engineering. pp. 1-18.

Ibrahim, N.-N.M.D. and Awang, M. and Hussain, P. (2016) Effect of thickness on residual stress in joining sialon to AISI 420. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 4191-4196.

Haris, F. and Hussain, P. and Abidin, K.A.Z. (2016) Feasible joining on the reaction layer of diffusion bonded sialon and duplex stainless steel. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14290-14293.

Rao, T.V.V.L.N. and Mokhtar, A.A. and Muhammad, M. and Hussain, P. (2016) Optimally tuned active damped dynamic vibration absorber. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13380-13383.

Dan, N.E. and Tarmizi Othman, M. and Hussain, P. and Amir, N.B. and Kakooei, S. (2016) Quenching and heat treatment of welded duplex stainless steel to avoid intergranular corrosion. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13405-13409.

Ibrahim, N.N.M. and Hussain, P. and Awang, M. (2014) Effect of nitriding on reaction layer of diffusion bonded sialon to AISI 420 martensitic stainless steel. Applied Mechanics and Materials, 660. pp. 178-184.

Ibrahim, N.N.M. and Hussain, P. and Awang, M. (2014) Microstructure and hardness of diffusion bonded sialon-AISI 420 martensitic stainless steel. Advanced Materials Research, 974. pp. 199-204.

Mustapha, M. and Mustapha, F. and Mamat, O. and Hussain, P. (2011) Fabrication of aluminium foam through pressure assisted high frequency induction heated sintering dissolution process: an experimental observation. Powder Metallurgy, 54 (3). pp. 343-353. ISSN 1743-2901

Conference or Workshop Item

Hussain, P. and Mahmoud, H. and Basha, S.N. and Mohamad, A.I. (2020) Correlation between microstructure and micro-hardness of 316L nitrided austenitic stainless steel. In: UNSPECIFIED.

Ibrahim, N.N.M. and Hussain, P. and Awang, M. (2015) Morphology, topography, and hardness of diffusion bonded sialon to AISI 420 at different bonding time. In: UNSPECIFIED.

Triwiyanto, A. and Hussain, P. and Priadi, D. and Ismail, M.C. (2015) Surface characteristics of low temperature hybrid thermochemical treatment of AISI 316L. In: UNSPECIFIED.

Mahmoud, H.R.S. and Yusoff, S.A. and Zainuddin, A. and Hussain, P. and Ismail, M. and Abidin, K. (2014) Effective duration of gas nitriding process on AISI 316L for the formation of a desired thickness of surface nitrided layer. In: UNSPECIFIED.

Abidin, K.A.Z. and Ismail, E.A. and Zainuddin, A. and Hussain, P. (2014) Investigation of microstructure and corrosion propagation behaviour of nitrided martensitic stainless steel plates. In: UNSPECIFIED.

Triwiyanto, A. and Zainuddin, A. and Abidin, K.A.Z. and Billah, M.A. and Hussain, P. (2014) Mathematical modelling of nitride layer growth of low temperature gas and plasma nitriding of AISI 316L. In: UNSPECIFIED.

Ibrahim, N.N.M. and Hussain, P. and Awang, M. (2014) Microstructure and hardness of high temperature gas nitrided aisi 420 martensitic stainless steel. In: UNSPECIFIED.

Citation Index Journal

Firmanto, H. and Hussain, P. and Mamat, O. (2011) Reaction Layers of the Diffusion-Bonded Sialon and High-Chromium Steel. [Citation Index Journal]

This list was generated on Sun Dec 1 13:20:11 2024 +08.