Items where Author is "Inayat, A."

Article

Inayat, A. and Jamil, F. and Ahmed, S.F. and Ayoub, M. and Abdul, P.M. and Aslam, M. and Mofijur, M. and Khan, Z. and Mustafa, A. (2023) Thermal degradation characteristics, kinetic and thermodynamic analyses of date palm surface fibers at different heating rates. Fuel, 335.

Ullah, S. and Azmi Bustam, M. and Sagir, M. and Ali Assiri, M. and Al-Sehemi, A.G. and Ayoub, M. and Inayat, A. and Mukhtar, A. and Saqib, S. and Babar, M. and Shehzad Qureshi, K. and Shiung Lam, S. (2022) CO2 solubility and thermophysical properties in aqueous mixtures of piperazine and diethanolamine. Sustainable Energy Technologies and Assessments, 53.

Nasrullah, A. and Khan, A.S. and Khan, S.Z. and Inayat, A. and Fagieh, T.M. and Bakhsh, E.M. and Akhtar, K. and Khan, S.B. and Din, I.U. (2022) Kinetics and thermodynamic study of Calligonum polygonoides pyrolysis using model-free methods. Process Safety and Environmental Protection, 160. pp. 130-138.

Rocha-Meneses, L. and Inayat, A. and Ayoub, M. and Ullah, S. and Naqvi, S.R. and Farrukh, S. and Mustafa, A. and Abdullah, A.Z. and Bhat, A.H. (2022) Parametric study for N2O conversion and reduction using cobalt-oxide-based catalysts. Environmental Progress and Sustainable Energy. ISSN 19447442

Mohd Johari, S.A. and Ayoub, M. and Inayat, A. and Ullah, S. and Uroos, M. and Naqvi, S.R. and Farukkh, S. (2022) Utilization of Dairy Scum Waste as a Feedstock for Biodiesel Production via Different Heating Sources for Catalytic Transesterification. ChemBioEng Reviews.

Mohd Johari, S.A. and Ayoub, M. and Inayat, A. and Ullah, S. and Uroos, M. and Naqvi, S.R. and Farukkh, S. (2022) Utilization of Dairy Scum Waste as a Feedstock for Biodiesel Production via Different Heating Sources for Catalytic Transesterification. ChemBioEng Reviews.

Mohd Johari, S.A. and Ayoub, M. and Inayat, A. and Ullah, S. and Uroos, M. and Naqvi, S.R. and Farukkh, S. (2022) Utilization of Dairy Scum Waste as a Feedstock for Biodiesel Production via Different Heating Sources for Catalytic Transesterification. ChemBioEng Reviews.

Mohd Johari, S.A. and Ayoub, M. and Inayat, A. and Ullah, S. and Uroos, M. and Naqvi, S.R. and Farukkh, S. (2022) Utilization of Dairy Scum Waste as a Feedstock for Biodiesel Production via Different Heating Sources for Catalytic Transesterification. ChemBioEng Reviews, 9 (6). pp. 605-632.

Naqvi, S.R. and Naqvi, M. and Ammar Taqvi, S.A. and Iqbal, F. and Inayat, A. and Khoja, A.H. and Mehran, M.T. and Ayoub, M. and Shahbaz, M. and Saidina Amin, N.A. (2021) Agro-industrial residue gasification feasibility in captive power plants: A South-Asian case study. Energy, 214.

Inayat, A. and Ahmad, M.A.B. and Raza, M. and Ghenai, C. and Naqvi, S.R. and Ayoub, M. (2021) Development of reaction kinetics model for the production of synthesis gas from dry methane reforming. Bulletin of Chemical Reaction Engineering & Catalysis, 16 (2). pp. 440-445.

Inayat, A. and Ghenai, C. and Alyassi, A. and Alawadhi, M. and Alhattawi, N. and Jamil, F. and Ayoub, M. (2021) Heat Integration for the Air-Conditioning Application using Waste Heat Recovery in the Cast Iron Industry. Chemical Engineering Transactions, 88. pp. 1135-1140.

Mukhtar, A. and Ullah, S. and Inayat, A. and Saqib, S. and Mellon, N.B. and Assiri, M.A. and Al-Sehemi, A.G. and Khan Niazi, M.B. and Jahan, Z. and Bustam, M.A. and Ibrahim, M. (2021) Synthesis-structure-property relationship of nitrogen-doped porous covalent triazine frameworks for pre-combustion CO2 capture. Energy, 216.

Inayat, A. and Raza, M. and Khan, Z. and Ghenai, C. and Aslam, M. and Shahbaz, M. and Ayoub, M. (2020) Flowsheet Modeling and Simulation of Biomass Steam Gasification for Hydrogen Production. Chemical Engineering and Technology, 43 (4). pp. 649-660.

Inayat, A. and Ang, H.H. and Raza, M. and Yousef, B.A.A. and Ghenai, C. and Ayoub, M. and Gilani, S.I.U.H. (2020) Integration and simulation of solar energy with hot flue gas system for the district cooling application. Case Studies in Thermal Engineering, 19.

Zahid, I. and Ayoub, M. and Abdullah, B.B. and Nazir, M.H. and Ameen, M. and Zulqarnain and Mohd Yusoff, M.H. and Inayat, A. and Danish, M. (2020) Production of Fuel Additive Solketal via Catalytic Conversion of Biodiesel-Derived Glycerol. Industrial and Engineering Chemistry Research, 59 (48). pp. 20961-20978.

Shahbaz, M. and Taqvi, S.A. and Minh Loy, A.C. and Inayat, A. and Uddin, F. and Bokhari, A. and Naqvi, S.R. (2019) Artificial neural network approach for the steam gasification of palm oil waste using bottom ash and CaO. Renewable Energy, 132. pp. 243-254.

Inayat, A. and Ayoub, M. and Abdullah, A.Z. and Ullah, S. and Naqvi, S.R. (2019) Decomposition of N2O at low temperature over Co3O4 prepared by different methods. Environmental Progress and Sustainable Energy.

Rezk, H. and Nassef, A.M. and Inayat, A. and Sayed, E.T. and Shahbaz, M. and Olabi, A.G. (2019) Improving the environmental impact of palm kernel shell through maximizing its production of hydrogen and syngas using advanced artificial intelligence. Science of the Total Environment, 658. pp. 1150-1160.

Khan, Z. and Yusup, S. and Aslam, M. and Inayat, A. and Shahbaz, M. and Raza Naqvi, S. and Farooq, R. and Watson, I. (2019) NO and SO2 emissions in palm kernel shell catalytic steam gasification with in-situ CO2 adsorption for hydrogen production in a pilot-scale fluidized bed gasification system. Journal of Cleaner Production, 236.

Khan, Z. and Yusup, S. and Ahmad, M.M. and Inayat, A. and Naqvi, M. and Sheikh, R. and Watson, I. (2018) Integrated catalytic adsorption steam gasification in a bubbling fluidized bed for enhanced H2 production: Perspective of design and pilot plant experiences. Biofuels, Bioproducts and Biorefining.

Khan, Z. and Yusup, S. and Ahmad, M.M. and Inayat, A. and Naqvi, M. and Sheikh, R. and Watson, I. (2018) Integrated catalytic adsorption steam gasification in a bubbling fluidized bed for enhanced H2 production: Perspective of design and pilot plant experiences. Biofuels, Bioproducts and Biorefining.

Naqvi, S.R. and Jamshaid, S. and Naqvi, M. and Farooq, W. and Niazi, M.B.K. and Aman, Z. and Zubair, M. and Ali, M. and Shahbaz, M. and Inayat, A. and Afzal, W. (2018) Potential of biomass for bioenergy in Pakistan based on present case and future perspectives. Renewable and Sustainable Energy Reviews, 81. pp. 1247-1258.

Naqvi, S.R. and Jamshaid, S. and Naqvi, M. and Farooq, W. and Niazi, M.B.K. and Aman, Z. and Zubair, M. and Ali, M. and Shahbaz, M. and Inayat, A. and Afzal, W. (2018) Potential of biomass for bioenergy in Pakistan based on present case and future perspectives. Renewable and Sustainable Energy Reviews, 81. pp. 1247-1258.

Shahbaz, M. and Yusup, S. and Ammar, M. and Inayat, A. and Patrick, D.O. (2017) Development of process flow sheet for syngas production from sorption enhanced steam gasification of palm kernel shell. Chemical Engineering Transactions, 61. pp. 1675-1680.

Inayat, A. and Ahmad, M.M. and Mutalib, M.I.A. and Yusup, S. and Khan, Z. (2017) Economic analysis and optimization for bio-hydrogen production from oil palm waste via steam gasification. Energy Sources, Part B: Economics, Planning and Policy, 12 (2). pp. 158-165.

Shahbaz, M. and Yusup, S. and Naz, M.Y. and Sulaiman, S.A. and Inayat, A. and Partama, A. (2017) Fluidization of palm kernel shell, palm oil fronds, and empty fruit bunches in a swirling fluidized bed gasifier. Particulate Science and Technology, 35 (2). pp. 150-157.

Shahbaz, M. and Yusup, S. and Inayat, A. and Patrick, D.O. and Pratama, A. and Ammar, M. (2017) Optimization of hydrogen and syngas production from PKS gasification by using coal bottom ash. Bioresource Technology, 241. pp. 284-295.

Inayat, A. and Ghenai, C. and Naqvi, M. and Ammar, M. and Ayoub, M. and Hussin, M.N.B. (2017) Parametric Study for Production of Dimethyl Ether (DME) As a Fuel from Palm Wastes. Energy Procedia, 105. pp. 1242-1249.

Inayat, A. and Ghenai, C. and Ayoub, M. and Eisa, E. (2017) Simulation for the production of synthetic natural gas for vehicles (SNGV) from palm waste via gasification with in-situ CO2 capture. 2017 7th International Conference on Modeling, Simulation, and Applied Optimization, ICMSAO 2017.

Shahbaz, M. and Yusup, S. and Inayat, A. and Patrick, D.O. and Pratama, A. (2016) Application of response surface methodology to investigate the effect of different variables on conversion of palm kernel shell in steam gasification using coal bottom ash. Applied Energy, 184. pp. 1306-1315.

Shahbaz, M. and Yusup, S. and Inayat, A. and Patrick, D.O. and Pratama, A. (2016) Application of response surface methodology to investigate the effect of different variables on conversion of palm kernel shell in steam gasification using coal bottom ash. Applied Energy, 184. pp. 1306-1315.

Shahbaz, M. and Yusup, S. and Inayat, A. and Patrick, D.O. and Pratama, A. (2016) Application of response surface methodology to investigate the effect of different variables on conversion of palm kernel shell in steam gasification using coal bottom ash. Applied Energy, 184. pp. 1306-1315.

Ahmad, A.A. and Zawawi, N.A. and Kasim, F.H. and Inayat, A. and Khasri, A. (2016) Assessing the gasification performance of biomass: A review on biomass gasification process conditions, optimization and economic evaluation. Renewable and Sustainable Energy Reviews, 53. pp. 1333-1347.

Ayoub, M. and Ullah, S. and Inayat, A. and Mahmood, S.M. (2016) Investigation of biodiesel-drive glycerol conversion to polyglycerol over basic modified AlPC catalyst. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2668-2672.

Ahmad, M.M. and Inayat, A. and Chugani, L.M. and Yusup, S. (2016) Process simulation of hydrogen production from bio-oil using iCON. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 38 (5). pp. 730-736.

Khan, Z. and Inayat, A. and Yusup, S. and Ahmad, M.M. (2015) Kinetic parameters determination using optimization approach in integrated catalytic adsorption steam gasification for hydrogen production. International Journal of Hydrogen Energy, 40 (29). pp. 8824-8832.

Inayat, A. and Ahmad, M.M. and Mutalib, M.I.A. and Yusup, S. and Khan, Z. (2015) MINLP optimization for heat integration of bio-hydrogen production from palm waste. Journal of Engineering Science and Technology, 10 (Spec.i). pp. 50-60.

Ayoub, M. and Inayat, A. and Rashid, U. and Ullah, S. and Lal, B. (2015) Synthesis of stable lithium modified mesoporous catalyst for oligomerization of biodisel-drive glycerol to diglycerol. Chemical Engineering Transactions, 45. pp. 1291-1296.

Jamil, F. and Bawadi, B.A. and Ahmad, M.M. and Inayat, A. and Yusup, S. (2014) Catalytic cracking of synthetic bio-oil: Kinetic studies. Applied Mechanics and Materials, 625. pp. 259-262.

Hamzah, N.H.A. and Chowdhury, S. and Sufian, S. and Omar, A.A. and Inayat, A. (2014) Development of morphology dependent titania nanomaterial for photo degradation of dyes. Applied Mechanics and Materials, 625. pp. 349-352.

Chowdhury, S. and Inayat, A. and Abdullah, B. and Omar, A.A. and Ganguly, S. (2014) Hydrogen and syngas generation from gasification of coal in an integrated fuel processor. Applied Mechanics and Materials, 625. pp. 644-647.

Inayat, A. and Ahmad, M.M. and Mutalib, M.I.A. and Yusup, S. and Khan, Z. (2014) Mathematical modelling for hydrogen production from steam gasification of cellulose. Applied Mechanics and Materials, 625. pp. 176-179.

Book

Inayat, A. and Tariq, R. and Ghenai, C. and Shahbaz, M. and Khan, Z. and Jamil, F. and Ayoub, M. (2022) Recent progress in biomass air gasification using moving and fixed bed gasifiers. Elsevier Inc., pp. 237-258. ISBN 9780323855860; 9780323900751

Bokhari, A. and Chuah, L.F. and Michelle, L.Z.Y. and Asif, S. and Shahbaz, M. and Akbar, M.M. and Inayat, A. and Jami, F. and Naqvi, S.R. and Yusup, S. (2019) Microwave enhanced catalytic conversion of canola-based methyl ester: Optimization and parametric study. Elsevier, pp. 153-166.

Inayat, A. and Ahmad, M.M. and Yusup, S. and Mutalib, M.I.A. and Khan, Z. (2014) Biomass steam gasification for hydrogen production: A systematic review. Springer International Publishing, pp. 329-343.