Items where Author is "Mamat, Othman"

Alam, Mohammad Azad and Ya, HH and Sapuan, SM and Mamat, Othman and Parveez, Bisma and Yusuf, Mohammad and Masood, Faisal and Ilyas, RA (2022) Recent advancements in advanced composites for aerospace applications: a review. Advanced Composites in Aerospace Engineering Applications. pp. 319-339.

Abd Majid, Mohd Amin and Haji Ya, Hamdan and Mamat, Othman and Mahadzir, Shuhaimi (2019) Techno economic evaluation of cold energy from Malaysian liquefied natural gas regasification terminals. Energies, 12 (23). p. 4475.

Majid, Mohd Amin Abd and Ya, Hamdan Haji and Mamat, Othman and Mahadzir, Shuhaimi (2019) Techno economic evaluation of cold energy from Malaysian liquefied natural gas regasification terminals. Energies, 12 (23). pp. 1-14.

Muhammad, Ibrahim Dauda and Awang, Mokhtar and Mamat, Othman and Shaari, Ku Zilati Ku (2015) Estimating Young�s modulus of single-walled zirconia nanotubes using nonlinear finite element modeling. Journal of Nanomaterials, 16 (1). p. 8.

Amir, Adibah and Mamat, Othman (2011) A Review of Wear Mechanisms of Ceramic-Reinforced Metal-Matrix Composite: Case Study of Nano Silica Reinforced Iron. Defect and Diffusion Forum, 319-320. pp. 77-84. ISSN 1662-9507

Ahmed, Tahir and Mamat, Othman (2011) Characterization and Properties of Copper-Silica Sand Nanoparticle Composites. Defect and Diffusion Forum, 319-320. pp. 95-105. ISSN 1662-9507

Ahmed, Tahir and Mamat, Othman and Bambang Ari, Wahjoedi (2011) Development and Characterization of Alumina-Silica Sand Nanoparticle Composites. Defect and Diffusion Forum, 319-320. pp. 85-94. ISSN 1662-9507

Hudiyo, Firmanto and Patthi, Hussain and Mamat, Othman (2011) Suppression of Iron Silicide Formation in the Reaction Layer of Sialon – 7.5% Cr Ferritic Steel Joint. Defect and Diffusion Forum, 312-315. pp. 888-893. ISSN 1662-9507

Ahmad, Tahir and Mamat, Othman (2011) The Development and Characterization of Zirconia-Silica Sand Nanoparticles Composites. World Journal of Nano Science and Engineering, 01 (01). pp. 7-14. ISSN 2161-4954

Mamat, Othman and Oumer, A.N. (2011) Numerical simulation of fiber suspension in a two dimensional cavity. WORLD JOURNAL OF ENGINEERING, 8 (1). pp. 77-86. ISSN 1708-5284

Singh, Gurbinder and Mamat, Othman (2011) Effect of Conduction Pre-heating in Au-Al Thermosonic Wire Bonding. [Citation Index Journal]

Mamat, Othman and B.I., Ugheoke and Ariwahjoedib, B. (2010) A brief survey of literature on Silica refractory research and development: a case for nanostructured silica obtained from rice husk ash (RHA). [Citation Index Journal] (In Press)

Mustapha, Mazli and Mamat, Othman and Hussain, P (2010) Preliminary study on the fabrication of aluminium foam through pressure assisted sintering dissolution process. [Citation Index Journal]

Mustapha, Faizal and Mustapha, Mazli and Mamat, Othman and Hussain, P and Noorsal, Kartini (2010) Preliminary study on the fabrication of aluminium foam through pressure assisted sintering dissolution process. [Citation Index Journal]

Hussain, P and Mamat, Othman and Mohammad, Mazlan (2010) Formation of Nitrogen-Pearlite in the Diffusion Bonding of Sialon to 316L Stainless Steel. American Institute of Physics Conference Proceeding, 1217 (129). ISSN 978-0-7354-0673-5

Hussain, P and Mamat, Othman and Mohammad, Mazlan (2010) Formation of Nitrogen-Pearlite in the Diffusion Bonding of Sialon to 316L Stainless Steel. American Institute of Physics (AIP).

Mamat, Othman and Mustapha, Mazli and Ismail, Fauzi (2009) The Empirical Relationship Between Relative Electrical Conductivity And Relative Density Of The Al-Foam Fabricated Through Pressure Assisted Sintering/Dissolution Process. In: International Advanced of Technology Congress (ATCi),PWTC, Malaysia, 3-5 November 2009, PWTC, Kuala Lumpur,Malaysia.

Mamat, Othman and Gebrehiwot, Tesfalidet (2009) Effect of Natural Sand on the Mechanical Properties of High Density polyethylene (HDPE) and Polypropylene (PP) Based Composites. In: International Conference on Mechanical Engineering 2009 UiTM, 24-25 June 2009, Concorde Hotel, Shah Alam, Selangor.

Hussain, P and Mamat, Othman and Firmanto, Hudiyo (2009) Solution nitriding of AISI 430 ferritic stainless steel. In: International Conference on Materials and Metallurgical Engineering, 23-25 June 2009, Sepuluh Nopember Institute of Tehnology, Surabaya, Indonesia.

Mamat, Othman and Ahmed, Tahir (2009) CHARACTERIZATION AND PROPERTIES OF ALUMINIUM- SILICA SAND NANOPARTICLE COMPOSITES. In: 25th. Regional Conference on Solid State Science and Technology for Scientific Advancement, 21-23 December 2009, Bayview Beach Resort, Penang, Malaysia.

Mamat, Othman and Hussain, P and Mustapha, Mazli and Ismail, Fauzi (2008) Empirical Relationship Between Relative Electrical Conductivity And Relative Density Of The Al-Foam Fabricated Through Pressure Assisted Sintering/Dissolution Process. American Institute of Physics (AIP), Volume. pp. 310-314.

Hussain, P and Mamat, Othman (2008) INTERDIFUSSION AND INTEREACTION OF STEEL-COMPOSITE-SIALON JOINT. [Citation Index Journal]

Ahmad, Faiz and Mamat, Othman and Amir, Norlaili and German, R.M (2007) Effects of Particle Shape and Fiber Length on Viscosity of Metal Composite Mixes. Advances in Powder Metallurgy . MPIF, USA. ISBN 978-0-9793488-5-3

Ahmad, Faiz and Mamat, Othman and Amir, Norlaili and German, R.M (2007) Effects of Particle Shape and Fiber Length on Viscosity of Metal Composite Mixes. Advances in Powder Metallurgy . MPIF, USA. ISBN 978-0-9793488-5-3

Ahmad, Faiz and M. Hashim , Fakhruldin and Mamat, Othman (2005) Fiber Breakage in Metal Composites Processed by Powder Injection Moulding Technology. In: International Conference on Powder Metallurgy and Particulate Materials 2005, June 2005, Canada.