Items where Author is "Mohammed, B.S."

Group by: Item Type | No Grouping

Jump to: Article | Conference or Workshop Item

Number of items: 107.

Article

Bheel, N. and Mohammed, B.S. and Liew, M.S. and Zawawi, N.A.W.A. (2023) Durability Behaviours of Engineered Cementitious Composites Blended with Carbon Nanotubes against Sulphate and Acid Attacks by Applying RSM Modelling and Optimization. Buildings, 13 (8). ISSN 20755309

Bheel, N. and Mohammed, B.S. and Liew, M.S. and Zawawi, N.A.W.A. (2023) Effect of Graphene Oxide as a Nanomaterial on the Durability Behaviors of Engineered Cementitious Composites by Applying RSM Modelling and Optimization. Buildings, 13 (8). ISSN 20755309

Bheel, N. and Mohammed, B.S. and Ali, M.O.A. and Shafiq, N. and Radu, D. (2023) Effect of graphene oxide as a nanomaterial on the bond behaviour of engineered cementitious composites by applying RSM modelling and optimization. Journal of Materials Research and Technology, 26. pp. 1484-1507. ISSN 22387854

Bheel, N. and Mohammed, B.S. and Ahmed Ali, M.O. and Shafiq, N. and Mohamed Tag-eldin, E. and Ahmad, M. (2023) Effect of polyvinyl alcohol fiber on the mechanical properties and embodied carbon of engineered cementitious composites. Results in Engineering, 20. ISSN 25901230

Bheel, N. and Mohammed, B.S. and Abdulkadir, I. and Liew, M.S. and Zawawi, N.A.W.A. (2023) Effects of Graphene Oxide on the Properties of Engineered Cementitious Composites: Multi-Objective Optimization Technique Using RSM. Buildings, 13 (8). ISSN 20755309

Al-Aidrous, A.-H.M.H. and Shafiq, N. and Rahmawati, Y. and Mohammed, B.S. and Al-Ashmori, Y.Y. and Baarimah, A.O. and Alawag, A.M. (2023) Major blocking factors affecting the application of industrialized building system. Ain Shams Engineering Journal.

Giri, Y.G.A.L.P. and Mohammed, B.S. and Liew, M.S. and Zawawi, N.A.W.A. and Abdulkadir, I. and Singh, P. and Ravindran, G. (2023) Mechanical and Microstructural Properties of Rubberized Geopolymer Concrete: Modeling and Optimization. Buildings, 13 (8). ISSN 20755309

Rahim, N.I. and Mohammed, B.S. and Abdulkadir, I. and Dahim, M. (2022) Effect of Crumb Rubber, Fly Ash, and Nanosilica on the Properties of Self-Compacting Concrete Using Response Surface Methodology. Materials, 15 (4).

Abdulkadir, I. and Mohammed, B.S. and Liew, M.S. and Wahab, M.M.A. (2022) Effect of Graphene Oxide and Crumb Rubber on the Drying Shrinkage Behavior of Engineered Cementitious Composite (ECC): Experimental Study, RSMâ��Based Modelling and Optimization. Lecture Notes in Civil Engineering, 179. pp. 29-42.

Rahmawati, Y. and Pradipto, E. and Mustaffa, Z. and Saputra, A. and Mohammed, B.S. and Utomo, C. (2022) Enhancing Studentsâ�� Competency and Learning Experience in Structural Engineering through Collaborative Building Design Practices. Buildings, 12 (4).

Al-Fakih, A. and Mohammed, B.S. and Al-Shugaa, M.A. and Al-Osta, M.A. (2022) Experimental investigation of dry-bed joints in rubberized concrete interlocking masonry. Journal of Building Engineering, 58.

Kamarul Zaman, A.B. and Mustaffa, Z. and Mohammed, B.S. and Ng, C.Y. (2022) Lateral Infiltration Capacity of Pervious Concrete and Its Performance as Pavement Curb. Journal of Materials in Civil Engineering, 34 (3).

Appana, P.M. and Mohammed, B.S. and Abdulkadir, I. and Ali, M.O.A. and Liew, M.S. (2022) Mechanical, Microstructural and Drying Shrinkage Properties of NaOH-Pretreated Crumb Rubber Concrete: RSM-Based Modeling and Optimization. Materials, 15 (7).

Choo, J. and Mohammed, B.S. and Chen, P.-S. and Abdulkadir, I. and Yan, X. (2022) Modeling and Optimizing the Effect of 3D Printed Origami Bubble Aggregate on the Mechanical and Deformation Properties of Rubberized ECC. Buildings, 12 (12).

Murali, M. and Alaloul, W.S. and Mohammed, B.S. and Musarat, M.A. and Salaheen, M.A. and Al-Sabaeei, A.M. and Isyaka, A. (2022) Utilizing graphene oxide in cementitious composites: A systematic review. Case Studies in Construction Materials, 17.

Mohammed, B.S. and Al-Fakih, A. and Liew, M.S. (2021) Characteristics of interlocking concrete bricks incorporated crumb rubber and fly ash. Lecture Notes in Civil Engineering, 132. pp. 631-639.

Mohammed, B.S. and Xian, L.W. and Haruna, S. and Liew, M.S. and Abdulkadir, I. and Zawawi, N.A.W.A. (2021) Deformation Properties of Rubberized Engineered Cementitious Composites Using Response Surface Methodology. Iranian Journal of Science and Technology - Transactions of Civil Engineering, 45 (2). pp. 729-740.

Usman Kankia, M. and Baloo, L. and Mohammed, B.S. and Hassan, S.B. and Haruna, S. and Danlami, N. and Affiana Ishak, E. and Nurliyana Samahani, W. (2021) Effects of petroleum sludge ash in fly ash-based geopolymer mortar. Construction and Building Materials, 272.

Liew, M.S. and Mohammed, B.S. and Danyaro, K.U. and Al-Yacouby, A.M. and Haruna, S. (2021) Effects of quartz powder on the compressive strength of high performance engineered cementitious composites. Lecture Notes in Civil Engineering, 132. pp. 677-684.

Abdulkadir, I. and Mohammed, B.S. and Liew, M.S. and Wahab, M.M.A. (2021) Modelling and multi-objective optimization of the fresh and mechanical properties of self-compacting high volume fly ash ECC (HVFA-ECC) using response surface methodology (RSM). Case Studies in Construction Materials, 14.

Abdulkadir, I. and Mohammed, B.S. and Liew, M.S. and Wahab, M.M.A. (2021) Modelling and optimization of the mechanical properties of engineered cementitious composite containing crumb rubber pretreated with graphene oxide using response surface methodology. Construction and Building Materials, 310.

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. (2021) On rubberized engineered cementitious composites (R-ECC): A review of the constituent material. Case Studies in Construction Materials, 14.

Kankia, M.U. and Baloo, L. and Danlami, N. and Mohammed, B.S. and Haruna, S. and Abubakar, M. and Jagaba, A.H. and Sayed, K. and Abdulkadir, I. and Salihi, I.U. (2021) Performance of fly ash-based inorganic polymer mortar with petroleum sludge ash. Polymers, 13 (23).

Mohammed, B.S. and Shafiq, N. and Kutty, S.R.M. and Mohamad, H. and Balogun, A.-L. (2021) Preface. Lecture Notes in Civil Engineering, 132. v.

Anwar, A. and Mohammed, B.S. and Wahab, M.B.A. and Muthusamy, K. and Liew, M.S. (2021) Structural Quality of Graphene Oxide Nanosheets on the Basis of Defect Ratio: A Raman Study. Lecture Notes in Mechanical Engineering, 46. pp. 423-439.

Ean, L.W. and Malek, M.A. and Mohammed, B.S. and Tang, C.-W. and Ng, C.Y. (2021) Study of c-s-h formation of cemented sediment brick. Lecture Notes in Civil Engineering, 132. pp. 501-509.

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. and Wahab, M.W.A. and Haruna, S. (2021) Utilizing of crumb rubber derived recycled scrap tires in masonry application: A review. Materials Science Forum, 1030 M. pp. 73-87.

Al-Fakih, A. and Mohammed, B.S. and Wahab, M.M.A. and Liew, M.S. and Mugahed Amran, Y.H. and Alyousef, R. and Alabduljabbar, H. (2020) Characteristic compressive strength correlation of rubberized concrete interlocking masonry wall. Structures, 26. pp. 169-184.

Adamu, M. and Mohammed, B.S. and Shafiq, N. and Liew, M.S. (2020) Durability performance of high volume fly ash roller compacted concrete pavement containing crumb rubber and nano silica. International Journal of Pavement Engineering, 21 (12). pp. 1437-1444.

Mohammed, B.S. and Yen, L.Y. and Haruna, S. and Seng Huat, M.L. and Abdulkadir, I. and Al-Fakih, A. and Liew, M.S. and Abdullah Zawawi, N.A.W. (2020) Effect of elevated temperature on the compressive strength and durability properties of crumb rubber engineered cementitious composite. Materials, 13 (16).

Haruna, S. and Mohammed, B.S. and Wahab, M.M.A. and Liew, M.S. (2020) Effect of paste aggregate ratio and curing methods on the performance of one-part alkali-activated concrete. Construction and Building Materials, 261.

Al-Fakih, A. and Wahab, M.M.A. and Mohammed, B.S. and Liew, M.S. and Wan Abdullah Zawawi, N.A. and As'ad, S. (2020) Experimental study on axial compressive behavior of rubberized interlocking masonry walls. Journal of Building Engineering, 29.

Al-Fakih, A. and Mohammed, B.S. and Wahab, M.M.A. and Liew, M.S. and Mugahed Amran, Y.H. (2020) Flexural behavior of rubberized concrete interlocking masonry walls under out-of-plane load. Construction and Building Materials, 263.

Aman, S.S. and Mohammed, B.S. and Wahab, M.A. and Anwar, A. (2020) Performance of reinforced concrete slab with opening strengthened using CFRP. Fibers, 8 (4).

Mohammed, B.S. and Aswin, M. and Liew, M.S. (2020) Prediction of failure load of RC and R-ECC dapped-end beams. Case Studies in Construction Materials, 13.

Alaloul, W.S. and Liew, M.S. and Zawawi, N.A.W. and Mohammed, B.S. and Adamu, M. and Musharat, M.A. (2020) Structural equation modelling of construction project performance based on coordination factors. Cogent Engineering, 7 (1).

Anwar, A. and Mohammed, B.S. and Liew, M.S. and Wahab, M.A. and Zawawi, N.A.W.A. (2019) Below-Grade Sulfur Storage Pits in Oil Refineries: A Review. Journal of Failure Analysis and Prevention, 19 (6). pp. 1745-1760.

Mohammed, B.S. and Achara, B.E. and Liew, M.S. and Alaloul, W.S. and Khed, V.C. (2019) Effects of elevated temperature on the tensile properties of NS-modified self-consolidating engineered cementitious composites and property optimization using response surface methodology (RSM). Construction and Building Materials, 206. pp. 449-469.

Adamu, M. and Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. (2019) Evaluating the impact resistance of roller compacted concrete containing crumb rubber and nanosilica using response surface methodology and Weibull distribution. World Journal of Engineering, 16 (1). pp. 33-43.

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. and Nikbakht, E. (2019) Incorporation of waste materials in the manufacture of masonry bricks: An update review. Journal of Building Engineering, 21. pp. 37-54.

Mohammed, B.S. and Adamu, M. (2019) Non-destructive evaluation of nano silica-modified roller-compacted rubbercrete using combined SonReb and response surface methodology. Road Materials and Pavement Design, 20 (4). pp. 815-835.

Mohammed, B.S. and Haruna, S. and Mubarak bn Abdul Wahab, M. and Liew, M.S. (2019) Optimization and characterization of cast in-situ alkali-activated pastes by response surface methodology. Construction and Building Materials, 225. pp. 776-787.

Ng, C.Y. and Narong, A.R. and Kamarul Zaman, A.B. and Mustaffa, Z. and Mohammed, B.S. and Ean, L.W. (2019) Properties of modified high permeable concrete with a crumb rubber. Open Civil Engineering Journal, 13 (1). pp. 82-91.

Ahmad, S. and Anwar, A. and Mohammed, B.S. and Wahab, M.B.A. and Ahmad, S.A. (2019) Strength behavior of concrete by partial replacement of fine aggregate with ceramic powder. International Journal of Recent Technology and Engineering, 8 (2). pp. 5712-5718.

Mohammed, B.S. and Aswin, M. and Liew, M.S. and Zawawi, N.A.W.A. (2019) Structural Performance of RC and R-ECC Dapped-End Beams Based on the Role of Hanger or Diagonal Reinforcements Combined by ECC. International Journal of Concrete Structures and Materials, 13 (1).

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2018) Abrasion Resistance of Nano Silica Modified Roller Compacted Rubbercrete: Cantabro Loss Method and Response Surface Methodology Approach. IOP Conference Series: Earth and Environmental Science, 140 (1).

Al-Fakih, A. and Mohammed, B.S. and Nuruddin, F. and Nikbakht, E. (2018) Development of Interlocking Masonry Bricks and its' Structural Behaviour: A Review Paper. IOP Conference Series: Earth and Environmental Science, 140 (1).

Mohammed, B.S. and Liew, M.S. and S Alaloul, W. and Al-Fakih, A. and Ibrahim, W. and Adamu, M. (2018) Development of rubberized geopolymer interlocking bricks. Case Studies in Construction Materials, 8. pp. 401-408.

Adamu, M. and Mohammed, B.S. and Liew, M.S. (2018) Effect of crumb rubber and nano silica on the creep and drying shrinkage of roller compacted concrete pavement. International Journal of GEOMATE, 15 (47). pp. 58-65.

Adamu, M. and Mohammed, B.S. and Shafiq, N. and Shahir Liew, M. (2018) Effect of crumb rubber and nano silica on the fatigue performance of roller compacted concrete pavement. Cogent Engineering, 5 (1).

Khed, V.C. and Mohammed, B.S. and Nuruddin, M.F. (2018) Effects of different crumb rubber sizes on the flowability and compressive strength of hybrid fibre reinforced ECC. IOP Conference Series: Earth and Environmental Science, 140 (1).

Mohammed, B.S. and Adamu, M. and Liew, M.S. (2018) Evaluating the effect of crumb rubber and nano silica on the properties of high volume fly ash roller compacted concrete pavement using non-destructive techniques. Case Studies in Construction Materials, 8. pp. 380-391.

Mohammed, B.S. and Adamu, M. and Liew, M.S. (2018) Evaluating the static and dynamic modulus of elasticity of roller compacted rubbercrete using response surface methodology. International Journal of GEOMATE, 14 (41). pp. 186-192.

Woen, E.L. and Malek, M.A. and Mohammed, B.S. and Chao-Wei, T. and Tamunif, M.T. (2018) Experimental study on compressive strength of sediment brick masonry. AIP Conference Proceedings, 1930.

Mohammed, B.S. and Adamu, M. (2018) Mechanical performance of roller compacted concrete pavement containing crumb rubber and nano silica. Construction and Building Materials, 159. pp. 234-251.

Adamu, M. and Mohammed, B.S. and Shahir Liew, M. (2018) Mechanical properties and performance of high volume fly ash roller compacted concrete containing crumb rubber and nano silica. Construction and Building Materials, 171. pp. 521-538.

Mohammed, B.S. and Adamu, M. (2018) Non-destructive evaluation of nano silica-modified roller-compacted rubbercrete using combined SonReb and response surface methodology. Road Materials and Pavement Design. pp. 1-21.

Al-Fakih, A. and Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. (2018) Physical properties of the rubberized interlocking masonry brick. International Journal of Civil Engineering and Technology, 9 (6). pp. 656-664.

Mohammed, B.S. and Liew, M.S. and Alaloul, W.S. and Khed, V.C. and Hoong, C.Y. and Adamu, M. (2018) Properties of nano-silica modified pervious concrete. Case Studies in Construction Materials, 8. pp. 409-422.

Mohammed, B.S. and Khed, V.C. and Nuruddin, M.F. (2018) Rubbercrete mixture optimization using response surface methodology. Journal of Cleaner Production, 171. pp. 1605-1621.

Adamu, M. and Mohammed, B.S. and Shafiq, N. and Shahir Liew, M. (2018) Skid Resistance of nano silica modified roller compacted rubbercrete for pavement applications: Experimental methods and response surface methodology. Cogent Engineering, 5 (1).

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2017) Effect of Mineral Filler type on Strength of Roller Compacted Rubbercrete for Pavement Applications. IOP Conference Series: Materials Science and Engineering, 201 (1).

Fauzi, A. and Nuruddin, M.F. and Malkawi, A.B. and Abdullah, M.M.A.B. and Mohammed, B.S. (2017) Effect of alkaline solution to fly ash ratio on geopolymer mortar properties. Key Engineering Materials, 733 KE. pp. 85-88.

Malkawi, A.B. and Nuruddin, M.F. and Fauzi, A. and Al-Mattarneh, H. and Mohammed, B.S. (2017) Effect of plasticizers and water on properties of HCFA geopolymers. Key Engineering Materials, 733 KE. pp. 76-79.

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2017) Effect of polycarboxylate superplasticizer dosage on the mechanical performance of roller compacted Rubbercrete for pavement applications. Journal of Engineering and Applied Sciences, 12 (20). pp. 5253-5260.

Mohammed, B.S. and Adamu, M. and Shafiq, N. (2017) Establishing relationship between modulus of elasticity and strength of nano silica modified roller compacted rubbercrete. International Journal of GEOMATE, 13 (39). pp. 103-110.

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2017) Evaluating the effect of superplasticizer on the properties of roller compacted concrete using response surface methodology. ARPN Journal of Engineering and Applied Sciences, 12 (21). pp. 6206-6215.

Mohammed, B.S. and Syed, Z.I. and Khed, V. and Qasim, M.S. (2017) Evaluation of nano-silica modified ECC based on ultrasonic pulse velocity and rebound hammer. Open Civil Engineering Journal, 11. pp. 638-649.

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2017) Mechanical performance of roller compacted rubbercrete with different mineral filler. Jurnal Teknologi, 79 (6). pp. 75-88.

Achara, B.E. and Mohammed, B.S. and Nuruddin, M.F. (2017) Optimisation of nano-silica modified self-compacting high-Volume fly ash mortar. IOP Conference Series: Materials Science and Engineering, 201 (1).

Achara, B.E. and Mohammed, B.S. and Nuruddin, M.F. (2017) Properties of Nano-Silica modified self-compacting high-volume fly ash mortar. Journal of Engineering and Applied Sciences, 12 (20). pp. 5294-5300.

Mohammed, B.S. and Achara, B.E. and Nuruddin, M.F. and Yaw, M. and Zulkefli, M.Z. (2017) Properties of nano-silica-modified self-compacting engineered cementitious composites. Journal of Cleaner Production, 162. pp. 1225-1238.

Mohammed, B.S. and Aswin, M. and Beatty, W.H. and Hafiz, M. (2016) Longitudinal shear resistance of PVA-ECC composite slabs. Structures, 5. pp. 247-257.

Mohammed, B.S. and Nuruddin, M.F. and Yogeswary, A. and Dayalan, P. (2016) Properties of high permeable concrete utilizing pozzolanic materials. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1457-1466.

Mohammed, B.S. and Awang, A.B. and Wong, S.S. and Nhavene, C.P. (2016) Properties of nano silica modified rubbercrete. Journal of Cleaner Production, 119. pp. 66-75.

Mohammed, B.S. and Nuruddin, M.F. and Aswin, M. and Mahamood, N. and Al-Mattarneh, H. (2016) Structural Behavior of Reinforced Self-Compacted Engineered Cementitious Composite Beams. Advances in Materials Science and Engineering, 2016.

Mohammed, B.S. and Ibrahim, R. and Perumal, N. and Rama Rao, K.S. (2015) Power flow control of a multi-bus/three-feeder distribution system using generalized unified power quality conditioner. Journal of Electrical Engineering and Technology, 10 (1). pp. 8-17.

Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I. (2015) Prediction of RC beams failure load using non-linear finite element analysis. International Journal of Applied Engineering Research, 10 (22). pp. 42974-42980.

Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I. (2015) Root cause of reinforced concrete dapped-end beams failure. International Journal of Applied Engineering Research, 10 (22). pp. 42927-42933.

Aswin, M. and Mohammed, B.S. and Liew, M.S. and Syed, Z.I. (2015) Shear Failure of RC Dapped-End Beams. Advances in Materials Science and Engineering, 2015.

Mohammed, B.S. and Ibrahim, R.B. and Perumal, N. and Rama Rao, K.S. (2014) Comparison of multi-carriers based PWM for multilevel converters. International Review on Modelling and Simulations, 7 (3). pp. 363-378.

Mohammed, B.S. and Abdullahi, M. and Hoong, C.K. (2014) Statistical models for concrete containing wood chipping as partial replacement to fine aggregate. Construction and Building Materials, 55. pp. 13-19.

Mohammed, B.S. and Azmi, N.J. (2014) Strength reduction factors for structural rubbercrete. Frontiers of Structural and Civil Engineering, 8 (3). pp. 270-281.

Mohammed, B.S. and Woen, E.L. and Malek, M.A. and Sing, W.L. and Abbas, N.A. and Yusop, H. and Muda, R.S. and Hashim, M. and Yong, U. (2013) Development of sediment brick utilizing reservoir sediment and fly ash. Applied Mechanics and Materials, 420. pp. 276-280.

Conference or Workshop Item

Al-Aidrous, A.-H.M.H. and Shafiq, N. and Mohammed, B.S. and Al-Ashmori, Y.Y. and Baarimah, A.O. and Al-Masoodi, A.H.H. (2021) Investigation of the current Innovative Industrialized Building Systems (IBS) in Malaysia. In: UNSPECIFIED.

Mohammed, B.S. and Nuruddin, M.F. and Shafiq, N. (2016) Development of high strength nano-silica modified rubbercrete. In: UNSPECIFIED.

Mohammed, B.S. and Ibrahim, R.B. (2015) Convertible active power filter: A new approach to compensate for current quality problems in the DS. In: UNSPECIFIED.

Mohammed, B.S. and Ahmed Nezri, A.N.S.B. (2015) Durability aspects and bond strength of rubbercrete containing nano silica. In: UNSPECIFIED.

This list was generated on Tue Dec 3 03:43:58 2024 +08.