Items where Author is "Muhammad, M."

Article

Mat Esa, M.A. and Muhammad, M. (2023) Adoption of prescriptive analytics for naval vessels risk-based maintenance:A conceptual framework. Ocean Engineering, 278. ISSN 00298018

Rao, T.V.V.L.N. and Akmar Mokhtar, A. and Muhammad, M. and Haji Ya, H. (2023) Analysis of Optimally Tuned Active Dynamic Vibration Absorber. Lecture Notes in Mechanical Engineering. pp. 455-462.

Abd Majid, M.A. and Muhammad, M. and Sasaki, T. and Amar Mokhtar, A. (2023) Analysis on Part Load Performance of EC Operations at District Cooling Plant. Lecture Notes in Mechanical Engineering. pp. 65-78.

Mohammad Nazari, N. and Muhammad, M. (2023) Comparative Analysis of Lubrication Oil Age Prediction Model. Lecture Notes in Mechanical Engineering. pp. 675-688.

Adha Mat Esa, M. and Muhammad, M. (2023) A Comprehensive Review of Prescriptive Analytics for Naval Vessels Risk-Based Maintenance Decision-Making. Lecture Notes in Mechanical Engineering. pp. 503-515.

Bin Mohd Nor, A.K. and Pedapati, S.R. and Muhammad, M. and Abdul Majid, M.A. (2023) Demonstrating Aleatoric Uncertainty in Remaining Useful Life Prediction Using LSTM with Probabilistic Layer. Lecture Notes in Mechanical Engineering. pp. 529-544.

Rozuhan, H. and Muhammad, M. and Muhammad Niazi, U. and Akmar Mokhtar, A. (2023) Probabilistic Hydrocarbon Release Leading to Fire and Explosion Incorporating System and Human Reliability Analysis: A Comparison of Onshore and Offshore Facilities. Lecture Notes in Mechanical Engineering. pp. 661-674.

Nor, A.K.M. and Pedapati, S.R. and Muhammad, M. and Leiva, V. (2022) Abnormality Detection and Failure Prediction Using Explainable Bayesian Deep Learning: Methodology and Case Study with Industrial Data. Mathematics, 10 (4).

Mohammad Nazari, N. and Muhammad, M. (2022) Developing a Lubrication Oil Age Prediction Model. Lecture Notes in Mechanical Engineering. pp. 411-421.

Mohammad Nazari, N. and Muhammad, M. (2022) Developing a Lubrication Oil Age Prediction Model. Lecture Notes in Mechanical Engineering. pp. 411-421.

Elfaki, M. and Nasif, M.S. and Muhammad, M. (2021) Effect of changing crude oil grade on slug characteristics and flow induced mechanical stresses in pipes. Applied Sciences (Switzerland), 11 (11).

Nor, A.K.M. and Pedapati, S.R. and Muhammad, M. and Leiva, V. (2021) Overview of explainable artificial intelligence for prognostic and health management of industrial assets based on preferred reporting items for systematic reviews and meta-analyses. Sensors, 21 (23).

Nor, A.K.M. and Pedapati, S.R. and Muhammad, M. (2021) Reliability engineering applications in electronic, software, nuclear and aerospace industries: A 20 year review (2000�2020). Ain Shams Engineering Journal.

Majid, M.A.A. and Muhammad, M. and Hampo, C.C. and Akmar, A.B. (2020) Analysis of a thermal energy storage tank in a large district cooling system: A case study. Processes, 8 (9).

Niazi, U.M. and Nasif, M.S. and Muhammad, M. (2020) Effect of wind directions on human injury and fatality risk modeling due to vapor cloud explosion in offshore platforms. Process Safety Progress, 39 (S1).

Rozuhan, H. and Muhammad, M. and Niazi, U.M. (2020) Probabilistic risk assessment of offshore installation hydrocarbon releases leading to fire and explosion, incorporating system and human reliability analysis. Applied Ocean Research, 101.

Rozuhan, H. and Muhammad, M. and Niazi, U.M. (2020) Probabilistic risk assessment of offshore installation hydrocarbon releases leading to fire and explosion, incorporating system and human reliability analysis. Applied Ocean Research, 101.

Rozuhan, H. and Muhammad, M. and Niazi, U.M. (2020) Probabilistic risk assessment of offshore installation hydrocarbon releases leading to fire and explosion, incorporating system and human reliability analysis. Applied Ocean Research, 101.

Abdul Karim, Z.A. and Afiq Sidqi, M. and Majid, M.A.A. and Muhammad, M. and Aoki, H. and Xiaoming, Z. (2019) Exergy and regression analysis for optimization of electric chillers at a gas district cooling plant. International Journal of Advanced Trends in Computer Science and Engineering, 8 (1.3 S1). pp. 98-102.

Mokhtar, A.A. and Mulubran, F. and Muhammad, M. (2019) Probabilistic life cycle costing: A case study of centrifugal pumps. SpringerBriefs in Applied Sciences and Technology. pp. 53-71.

Mokhtar, A.A. and Mulubran, F. and Muhammad, M. (2019) Probabilistic life cycle costing: A case study of centrifugal pumps. SpringerBriefs in Applied Sciences and Technology. pp. 53-71.

Mokhtar, A.A. and Mulubran, F. and Muhammad, M. (2019) Probabilistic life cycle costing: A case study of centrifugal pumps. SpringerBriefs in Applied Sciences and Technology. pp. 53-71.

Ahsan, S. and Lemma, T.A. and Muhammad, M. (2019) Prognosis of gas turbine remaining useful life using particle filter approach Prognose der verbleibenden Nutzungsdauer einer Gasturbine mittels Partikelfilter-Verfahren. Materialwissenschaft und Werkstofftechnik, 50 (3). pp. 336-345.

Mokhtar, A.A. and Muhammad, M. and Hussin, H. and Majid, M.A.A. (2018) Assessing performance of aging air-cooled heat exchangers using inspection and performance data. IEEE International Conference on Industrial Engineering and Engineering Management, 2017-D. pp. 1490-1494.

Hamdavi, S. and Rao, T.V.V.L.N. and Muhammad, M. and Faez, K.M. and Ya, H.H. (2017) Linear stability analysis of short journal bearing with an axial groove: Lineare Stabilitätsanalyse von Kurzgleitlagern mit einer axialen Nut. Materialwissenschaft und Werkstofftechnik, 48 (3). pp. 210-217.

Tahan, M. and Muhammad, M. and Abdul Karim, Z.A. (2017) Performance evaluation of a twin-shaft gas turbine engine in mechanical drive service. Journal of Mechanical Science and Technology, 31 (2). pp. 937-948.

Tahan, M. and Muhammad, M. and Abdul Karim, Z.A. (2017) A multi-nets ANN model for real-time performance-based automatic fault diagnosis of industrial gas turbine engines. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39 (7). pp. 2865-2876.

Ahmed, U. and Hussin, H. and Muhammad, M. (2016) Comprehensive data collection for root cause failure analysis in oil and gas industries. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12153-12158.

Tahan, M. and Sarwar, U. and Muhammad, M. and Abdul Karim, Z.A. (2016) Modeling and sensitivity analysis of a multi-nets anns model for real-time performance-based condition monitoring of an industrial gas turbine engine. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14269-14274.

Tahan, M. and Sarwar, U. and Muhammad, M. and Abdul Karim, Z.A. (2016) Modeling and sensitivity analysis of a multi-nets anns model for real-time performance-based condition monitoring of an industrial gas turbine engine. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14269-14274.

Rao, T.V.V.L.N. and Mokhtar, A.A. and Muhammad, M. and Hussain, P. (2016) Optimally tuned active damped dynamic vibration absorber. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13380-13383.

Rao, T.V.V.L.N. and Mokhtar, A.A. and Muhammad, M. and Hussain, P. (2016) Optimally tuned active damped dynamic vibration absorber. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13380-13383.

Mokhtar, A.A. and Misren, M.M. and Muhammad, M. and Hussin, H. (2016) RAM analysis of crude oil transfer pumps using dominant failure mode. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13348-13352.

Mokhtar, A.A. and Misren, M.M. and Muhammad, M. and Hussin, H. (2016) RAM analysis of crude oil transfer pumps using dominant failure mode. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13348-13352.

Mulubrhan, F. and Mokhtar, A.A.B. and Muhammad, M. (2016) Replacement analysis using probabilistic life cycle costing. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13042-13048.

Mulubrhan, F. and Mokhtar, A.A.B. and Muhammad, M. (2016) Replacement analysis using probabilistic life cycle costing. ARPN Journal of Engineering and Applied Sciences, 11 (22). pp. 13042-13048.

Burhani, N.R.A. and Muhammad, M. and Ismail, M.C. and Mahed, M.A. (2016) An experimental analysis using taguchi method in resolving the significant factors subject to corrosion under insulation. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11966-11970.

Muhammad, M. and Nasir, M. and Mokhtar, A.A. and Hussin, H. (2015) Continuous life cycle cost model for repairable system. Lecture Notes in Mechanical Engineering, 19. pp. 279-287.

Muhammad, M. and Yeong, Y.F. and Lau, K.K. and Mohd Shariff, A.B. (2015) Issues and challenges in the development of deca-dodecasil 3 rhombohedral membrane in CO2 capture from natural gas. Separation and Purification Reviews, 44 (4). pp. 331-340.

Hussin, H. and Mokhtar, A.A. and Muhammad, M. (2014) Identification of critical factors to system performance using availability modeling and simulation analysis. Applied Mechanics and Materials, 490-49. pp. 1759-1763.

Mulubrhan, F. and Mokhtar, A.A. and Muhammad, M. (2014) Integrating reliability analysis in life cycle cost estimation of heat exchanger and pump. Advanced Materials Research, 903. pp. 408-413.

Conference or Workshop Item

Burhani, N.R.A. and Muhammad, M. and Ismail, M.C. (2014) Available prediction methods for Corrosion under Insulation (CUI): A Review. In: UNSPECIFIED.

Mulubrhan, F. and Mokhtar, A.A. and Muhammad, M. (2014) Comparative analysis between fuzzy and traditional analytical hierarchy process. In: UNSPECIFIED.

Hussin, H. and Mokhtar, A.A. and Muhammad, M. and Karim, M.A.A. (2014) Development of reliability analysis toolkit for analysing plant maintenance data. In: UNSPECIFIED.

Reshid, M.N. and Majid, M.A.A. and Muhammad, M. (2014) Evaluation of redundancy for power generating unit in a cogeneration power plant. In: UNSPECIFIED.

Mohammadreza Tahan, B. and Muhammad, M. and Karim, Z.A.A. (2014) A Framework for intelligent condition-based maintenance of rotating equipment using mechanical condition monitoring. In: UNSPECIFIED.

Muhammad, M. and Mokhtar, A.A. and Hussin, H. (2014) Reliability assessment of repairable system through expert elicitation. In: UNSPECIFIED.