Items where Author is "Muhsan, A.S."

Article

Alfellag, M.A. and Kamar, H.M. and Sidik, N.A.C. and Muhsan, A.S. and Kazi, S.N. and Alawi, O.A. and Abidin, U. (2023) Rheological and thermophysical properties of hybrid nanofluids and their application in flat-plate solar collectors: a comprehensive review. Journal of Thermal Analysis and Calorimetry, 148 (14). pp. 6645-6686. ISSN 13886150

Alakbari, F.S. and Mohyaldinn, M.E. and Ayoub, M.A. and Muhsan, A.S. and Hussein, I.A. (2023) A robust Gaussian process regression-based model for the determination of static Young�s modulus for sandstone rocks. Neural Computing and Applications, 35 (21). pp. 15693-15707. ISSN 09410643

Alakbari, F.S. and Mohyaldinn, M.E. and Ayoub, M.A. and Muhsan, A.S. and Hussein, I.A. (2022) An Accurate Reservoir's Bubble Point Pressure Correlation. ACS Omega, 7 (15). pp. 13196-13209.

Mohamed, D.F. and Hamdi, S.S. and Alzanam, A. and Mohyaldinn, M.E. and Muhsan, A.S. (2022) Carbon-based nanocoating for extended lifetime of conventional scale inhibitor squeeze treatment in sandstone reservoirs. Journal of Petroleum Science and Engineering, 211.

Ishtiaq, U. and Aref, A. and Muhsan, A.S. and Rashid, A. and Hamdi, S.S. (2022) High strength glass beads coated with CNT/rGO incorporated urethane coating for improved crush resistance for effective hydraulic fracturing. Journal of Petroleum Exploration and Production Technology.

Alakbari, F.S. and Mohyaldinn, M.E. and Ayoub, M.A. and Muhsan, A.S. and Abdulkadir, S.J. and Hussein, I.A. and Salih, A.A. (2022) Prediction of critical total drawdown in sand production from gas wells: Machine learning approach. Canadian Journal of Chemical Engineering.

Hamdi, S.S. and Al-Kayiem, H.H. and Alsabah, M.S. and Muhsan, A.S. (2022) A comparative study of dispersed and grafted nanofluids of graphene nanoplatelets with natural polymer in high salinity brine for enhanced oil recovery. Journal of Petroleum Science and Engineering, 210.

Alakbari, F.S. and Mohyaldinn, M.E. and Ayoub, M.A. and Muhsan, A.S. and Hussein, I.A. (2022) A reservoir bubble point pressure prediction model using the Adaptive Neuro-Fuzzy Inference System (ANFIS) technique with trend analysis. PLoS ONE, 17 (8 Augu).

Ahmad, F. and Mohammad, M. and Muhsan, A.S. and Ali, M. and Naseer, A. and Aslam, M. and Malik, M.R.R. (2020) Effect of Thermal Cycling on Thermal Conductivity of Powder Injection Moulded MWCNT Reinforced Copper Matrix Composites. Lecture Notes in Mechanical Engineering. pp. 377-387.

Hamdi, S.S. and Al-Kayiem, H.H. and Muhsan, A.S. and Magaril, E. (2020) Experimental dataset on the dispersion stability of natural polymer non-covalently functionalized graphene nanoplatelets in high salinity brines. Data in Brief, 31.

Shahid, M.U. and Mohamed, N.M. and Muhsan, A.S. and Zaine, S.N.A. and Bashiri, R. and Khatani, M. and Samsudin, A.E. (2020) Solvent exfoliated graphene incorporated mixed phase TiO2 transparent photoelectrode for the efficient and color transparent dye-sensitized solar cell. Solar Energy, 206. pp. 317-329.

Shahid, M.U. and Mohamed, N.M. and Muhsan, A.S. and Bashiri, R. and Shamsudin, A.E. and Zaine, S.N.A. (2019) Few-layer graphene supported polyaniline (PANI) film as a transparent counter electrode for dye-sensitized solar cells. Diamond and Related Materials, 94. pp. 242-251.

Shahid, M.U. and Mohamed, N.M. and Khatani, M. and Muhsan, A.S. and Samsudin, A. and Irshad, M.I. and Zaine, S.N.A. (2017) Graphene modified FTO/TiO2 interface photoelectrode for improved performance of dye sensitized solar cells. AIP Conference Proceedings, 1901.

Muhsan, A.S. and Mohamed, N.M. and Ahmad, F. and Albarody, T.M.B. and Shahid, M.U. (2016) Effects of sintering parameters on the microstructural characteristics of cu/cnts nanocomposites. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14294-14298.

Muhsan, A.S. and Mohamed, N.M. and Ahmad, F. and Albarody, T.M.B. and Shahid, M.U. (2016) Effects of sintering parameters on the microstructural characteristics of cu/cnts nanocomposites. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14294-14298.

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Raza, M.R. (2015) Thermal conductivity of powder injection molded carbon nanotube-reinforced copper-matrix composites. International Journal of Powder Metallurgy, 51 (1). pp. 57-66.

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Megat Yusoff, P.S.M. and Raza, M.R. (2014) Homogeneous distribution of carbon nanotubes in copper matrix nanocomposites fabricated via combined technique. Nanoscience and Nanotechnology Letters, 6 (10). pp. 865-874.

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Raza, M.R. (2013) Fabrication and microstructural analysis of CNTs reinforced copper matrix nanocomposites via MIM technique. Applied Mechanics and Materials, 459. pp. 11-17.

Raza, M.R. and Ahmad, F. and Mamat, O. and Omar, M.A. and German, RM and Muhsan, A.S. (2012) Effects of Sintering Temperature and Cooling Rate on Mechanical Properties of Powder Injection Molded 316L Stainless Steel. Solid State Phenomena, 185. pp. 102-105.

Conference or Workshop Item

Alzanam, A.A.A. and Muhsan, A.S. (2021) Resin-Based Nanocomposites Coated Proppants as Scale Inhibitor Carrier and Slowly Releasing Container. In: UNSPECIFIED.

Hamdi, S.S. and Muhsan, A.S. and Al-Kayiem, H.H. (2020) Influence of non-covalently functionalized graphene nanoplatelets on viscosity and wettability for improved oil mobility at reservoir conditions. In: UNSPECIFIED.

Hussein, O.A. and Habib, K. and Nasif, M. and Saidur, R. and Muhsan, A.S. (2020) Investigation of stability, dispersion, and thermal conductivity of functionalized multi-walled carbon nanotube based nanofluid. In: UNSPECIFIED.

Hussein, O.A. and Habib, K. and Nasif, M. and Saidur, R. and Muhsan, A.S. (2020) Investigation of stability, dispersion, and thermal conductivity of functionalized multi-walled carbon nanotube based nanofluid. In: UNSPECIFIED.

Qian, T. and Muhsan, A.S. and Htwe, L. and Mohamed, N. and Hussein, O. (2020) Urethane based nanocomposite coated proppants for improved crush resistance during hydraulic fracturing. In: UNSPECIFIED.

Qian, T. and Muhsan, A.S. and Htwe, L. and Mohamed, N. and Hussein, O. (2020) Urethane based nanocomposite coated proppants for improved crush resistance during hydraulic fracturing. In: UNSPECIFIED.

Shirazi, I. and Ahmad, F. and Raza, M.R. and Muhsan, A.S. and Aslam, M. (2015) Shear controlled alignment of short carbon fibers in copper matrix composite green samples produced by powder injection molding. In: UNSPECIFIED.

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Yusoff, P.S.M.M. and Raza, M.R. and Afrooz, I.E. (2014) Experimental preparation and numerical simulation of high thermal conductive Cu/CNTs Nanocomposites. In: UNSPECIFIED.

Irfan Shirazi, M. and Ahmad, F. and Rafi Raza, M. and Muhsan, A.S. and Omer, M.A. and Aslam, M. (2014) Orientation of carbon fibers in copper matrix produced by powder injection molding. In: UNSPECIFIED.

Afrooza, I.E. and Binti Megat Yusoff, P.S.M. and Ahmad, F. and Muhsan, A.S. (2014) A numerical analysis for predicting the thermal conductivity of carbon nanotube reinforced copper-matrix nanocomposites. In: UNSPECIFIED.