Items where Author is "Naz, M.Y."

Group by: Item Type | No Grouping

Number of items: 62.

Hussain, Z. and Zuhra and Rukh, G. and Zada, A. and Naz, M.Y. and Khan, K.M. and Shukrullah, S. and Sulaiman, S.A. (2021) Construction of rechargeable bio-battery cells from electroactive antioxidants extracted from wasted vegetables. Cleaner Engineering and Technology, 5.

Naz, M.Y. and Shukrullah, S. and Noman, M. and Yaseen, M. and Naeem, M. and Sulaiman, S.A. (2021) Effect of Water-Mixed Polyvinyl Alcohol Viscosity on Wear Response of Carbon Steel Exposed to an Eroding Medium. Journal of Materials Engineering and Performance, 30 (3). pp. 2066-2073.

Khan, A. and Hussain, Z. and Hussain, K. and Naz, M.Y. and Jan, M.R. and Shukrullah, S. and Ullah, S. and Sulaiman, S.A. and Hussien, M. (2021) Evaluation of the catalytic activity of borax and its calcined derivatives for pyrolytic valorization of waste tire tube rubber for production of oil and gases. Reaction Kinetics, Mechanisms and Catalysis, 134 (2). pp. 883-901.

Naz, M.Y. and Bou-Rabee, M. and Shukrullah, S. and Ghaffar, A. and Gungor, A. and Sulaiman, S.A. (2021) A review of hybrid energy technologies tenets, controls and combinational strategies. Cleaner Engineering and Technology, 5.

Ismail, N.I. and Naz, M.Y. and Shukrullah, S. and Sulaiman, S.A. (2020) Mechanical earth modeling and sand onset production prediction for Well X in Malay Basin. Journal of Petroleum Exploration and Production Technology, 10 (7). pp. 2753-2758.

Ismail, N.I. and Lawrence, E. and Naz, M.Y. and Shukrullah, S. and Sulaiman, S.A. (2020) Role of particle size distribution of bridging agent for drilling mud on formation damage near wellbore. In: UNSPECIFIED.

Naz, M.Y. and Shukrullah, S. and Sulaiman, S.A. and Khan, Y. and Alkanhal, M.A.S. and Ghaffar, A. (2019) Particle image velocimetry analysis of a swirling bed operation by using a mesh-coupled annular air distributor. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41 (9).

Shukrullah, S. and Naz, M.Y. and Mohamed, N.M. and Ibrahim, K.A. and Ghaffar, A. and AbdEl-Salam, N.M. (2019) Production of bundled CNTs by floating a compound catalyst in an atmospheric pressure horizontal CVD reactor. Results in Physics, 12. pp. 1163-1171.

Hussain, Z. and Khan, A. and Sultan, N. and Ali, M. and Naz, M.Y. and Saed, K. and Sulaiman, S.A. (2019) Thermo-chemical conversion of waste glass into non-vitreous porous material for adsorption application. Journal of Material Cycles and Waste Management.

Safiyullah, F. and Sulaiman, S.A. and Naz, M.Y. and Jasmani, M.S. and Ghazali, S.M.A. (2018) Prediction on performance degradation and maintenance of centrifugal gas compressors using genetic programming. Energy, 158. pp. 485-494.

Mahmood, T. and Naz, M.Y. and Sulaiman, S.A. and Jamil, Y. and Shukrullah, S. and Zahid, M. and Inayat, M. (2017) CFD Modeling and Experimental Validation of a Solar Still. MATEC Web of Conferences, 131.

Naz, M.Y. and Ismail, N.I. and Sulaiman, S.A. and Shukrullah, S. (2017) Characterization of erosion of gas pipelines by dry sand. Instrumentation Science and Technology, 45 (1). pp. 62-72.

Naz, M.Y. and Sulaiman, S.A. and Shukrullah, S. and Ghaffar, A. and Ibrahim, K.A. and AbdEl-Salam, N.M. (2017) Development of erosion-corrosion mechanisms for the study of steel surface behavior in a sand slurry. Measurement: Journal of the International Measurement Confederation, 106. pp. 203-210.

Hussain, Z. and Sulaiman, S.A. and Bashir, N. and Uddin, I. and Khan, K.M. and Perveen, S. and Naz, M.Y. (2017) Effect of pretreatment on product distribution of two-step catalytic pyrolysis of spirogyra. Environmental Progress and Sustainable Energy, 36 (3). pp. 775-780.

Ibrahim, K.A. and Naz, M.Y. and Sulaiman, S.A. and Ghaffar, A. and Jamil, Y. and Abdel-Salam, N.M. (2017) Effect of urea and borate plasticizers on rheological response of corn starch. Polymers, 9 (9).

Shahbaz, M. and Yusup, S. and Naz, M.Y. and Sulaiman, S.A. and Inayat, A. and Partama, A. (2017) Fluidization of palm kernel shell, palm oil fronds, and empty fruit bunches in a swirling fluidized bed gasifier. Particulate Science and Technology, 35 (2). pp. 150-157.

Naz, M.Y. and Sulaiman, S.A. and Mahmood, T. and Hussain, M.I. and Ghaffar, A. and Jamil, Y. and Inayat, M. (2017) Heating Performance Study on a Passive Solar Heater. MATEC Web of Conferences, 131.

Naz, M.Y. and Sulaiman, S.A. and Shukrullah, S. and Ghaffar, A. and Khan, Y. and Ahmad, I. (2017) PIV investigations on particle velocity distribution in uniform swirling regime of fluidization. Granular Matter, 19 (2).

Naz, M.Y. and Sulaiman, S.A. and Bou-Rabee, M.A. (2017) Particle tracking velocimetry investigations on density dependent velocity vector profiles of a swirling fluidized bed. Drying Technology, 35 (2). pp. 193-202.

Naz, M.Y. and Ismail, N.I. and Sulaiman, S.A. and Shukrullah, S. (2016) ABRASIVE EROSION STUDY on S45C CARBON STEEL USING SAND BLASTING TECHNIQUE. Surface Review and Letters, 23 (5).

Khan, R.R.M. and Adnan, A. and Pervaiz, M. and Raza, M.A. and Sagir, M. and Naz, M.Y. (2016) Biodegradation of H acid by Bacillus subtilis and RP-HPLC method development for percent degradation estimation. Russian Journal of Physical Chemistry B, 10 (3). pp. 517-523.

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Naz, M.Y. (2016) Effect of Ethylene Flow Rate and CVD Process Time on Diameter Distribution of MWCNTs. Materials and Manufacturing Processes, 31 (12). pp. 1537-1542.

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Ullah, S. and Naz, M.Y. (2016) Effective CO2 adsorption on pristine and chemically functionalized MWCNTs. In: UNSPECIFIED.

Naz, M.Y. and Shukrullah, S. and Sulaiman, S.A. and Najeeb-Ur-Rehman and Khan, Y. and Ghaffar, A. and Ullah, S. (2016) Investigations on spatial distribution of low temperature plasma parameters using NiCr wire probe diagnostic. Measurement: Journal of the International Measurement Confederation, 91. pp. 194-200.

Naz, M.Y. and Shukrullah, S. and Ghaffar, A. and Rehman, N.U. and Sagir, M. (2016) A Low-Frequency Dielectric Barrier Discharge System Design for Textile Treatment. Synthesis and Reactivity in Inorganic, Metal-Organic and Nano-Metal Chemistry, 46 (1). pp. 104-109.

Shafa, M. and Wang, Z. and Naz, M.Y. and Akbar, S. and Farooq, M.U. and Ghaffar, A. (2016) Morphology and photoresponse of crystalline antimony film grown on mica by physical vapor deposition. Materials Science- Poland, 34 (3). pp. 591-596.

Sulaiman, S.A. and Miin, C.S. and Naz, M.Y. and Raghavan, V.R. (2016) Particle Image Velocimetry of a Swirling Fluidized Bed at Different Blade Angles. Chemical Engineering and Technology, 39 (6). pp. 1151-1160.

Naz, M.Y. and Shukrullah, S. and Ghaffar, A. and Rehman, N.U. and Khan, Y. (2016) Test of a new tip material for Langmuir probe diagnostic. Journal of Applied Mechanics and Technical Physics, 57 (2). pp. 211-218.

Hussain, Z. and Sulaiman, S.A. and Khan, A. and Khan, K.M. and Perveen, S. and Naz, M.Y. (2016) Two-Step Pyrolysis of Spirogyra for Fuels Using Cement Catalytic. Waste and Biomass Valorization, 7 (6). pp. 1481-1489.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Shaari, K.Z.K. (2015) Effect of pre-coat solution temperature on fluidized bed urea coatings. Surface Engineering, 31 (7). pp. 486-491.

Naz, M.Y. and Sulaiman, S.A. and Man, Z. and Ariwahjoedi, B. (2015) Effect of the water spray stress on swirling fluidized bed height. ARPN Journal of Engineering and Applied Sciences, 10 (21). pp. 10192-10195.

Miin, C.S. and Sulaiman, S.A. and Raghavan, V.R. and Heikal, M.R. and Naz, M.Y. (2015) Hydrodynamics of multi-sized particles in stable regime of a swirling bed. Korean Journal of Chemical Engineering, 32 (11). pp. 2361-2367.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. (2015) Sauter mean diameter statistics of the starch dispersion atomized with hydraulic nozzle. In: UNSPECIFIED.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. (2015) Spatio-temporal droplet size statistics in developing spray of starchy solution. In: UNSPECIFIED.

Naz, M.Y. and Shukrullah, S. and Ghaffar, A. and Shakir, I. and Ullah, S. and Sagir, M. and Pervaiz, M. (2015) Surface morphology and mechanical strength of AISI M2 tool steel treated in abnormal glow region of plasma. Surface Engineering and Applied Electrochemistry, 51 (1). pp. 58-64.

Ali, A. and Farooq, M.U. and Naz, M.Y. and Qayyum, A. and Khan, Y. and Ghaffar, A. and Shukrullah, S. (2015) Symmetric tungsten triple probe diagnostic for time resolved measurements in plasma discharge. International Journal of Applied Electromagnetics and Mechanics, 49 (2). pp. 289-298.

Naz, M.Y. and Sulaiman, S.A. and Man, Z. (2015) Time function DualPDA study of spray growth and droplet size-velocity profiles of chemically modified tapioca starch. Aerosol and Air Quality Research, 15 (5). pp. 1699-1711.

Farooq, M.U. and Ali, A. and Qayyum, A. and Naz, M.Y. and Khan, Y. and Shukrullah, S. and Ghaffar, C.A. (2015) Time function triple Langmuir probe measurements in low frequency pulsed DC discharge plasma. High Energy Chemistry, 49 (4). pp. 286-293.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Zilati, K. (2015) Visual characterization of heated water spray jet breakup induced by full cone spray nozzles. Journal of Applied Mechanics and Technical Physics, 56 (2). pp. 211-219.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Shaari, K.Z.K. (2014) Characterization of modified tapioca starch solutions and their sprays for high temperature coating applications. The Scientific World Journal, 2014.

Naz, M.Y. and Shukrullah, S. and Ghaffar, A. and Rehman, N.U. (2014) Development of simple designs of multitip probe diagnostic systems for RF plasma characterization. The Scientific World Journal, 2014.

Shukrullah, S. and Mohamed, N.M. and Shaharun, M.S. and Naz, M.Y. (2014) Effect of ferrocene concentration on the quality of multiwalled CNTs grown by floating catalytic chemical vapor deposition technique. Main Group Chemistry, 13 (3). pp. 251-259.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Ku Shaari, K.Z. (2014) Study of primary atomisation phenomenon of modified starch solution stream at elevated temperature. Materials Research Innovations, 18. S6-135-S6-139.

Naz, M.Y. and Sulaiman, S.A. (2014) Surface Morphology and Dissolution Rate of Slow Discharge Urea Coated with Starch-Urea-Borax Matrix. Polymer - Plastics Technology and Engineering, 53 (17). pp. 1778-1787.

Ullah, S. and Bustam, M.A. and Nadeem, M. and Naz, M.Y. and Tan, W.L. and Shariff, A.M. (2014) Synthesis and thermal degradation studies of melamine formaldehyde resins. Scientific World Journal, 2014.

Naz, M.Y. and Shukrullah, S. and Ghaffar, A. and Shakir, I. and Ullah, S. and Sagir, M. (2014) Testing of nickel-chrome alloy as a tip material for multi-tip langmuir probes. Surface Review and Letters, 21 (4).

Naz, M.Y. and Sulaiman, S.A. (2014) Testing of starch-based carbohydrate polymer coatings for enhanced urea performance. Journal of Coatings Technology and Research, 11 (5). pp. 747-756.

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. and Ku Shaari, K.Z. (2014) Visual Characterization of Airless Water Spray Jet Breakup and Vortex Clouds Formation at Elevated Temperature and Pressure. Arabian Journal for Science and Engineering, 39 (10). pp. 7241-7250.

Rehman, N.U. and Khan, M.A. and Naz, M.Y. and Shafiq, M. and Zakaullah, M. (2013) Characterization of 13.56 MHz RF Ne-N2 mixture plasma using intrusive and non-intrusive diagnostic techniques. Physica Scripta, 88 (4).

Naz, M.Y. and Sulaiman, S.A. and Ariwahjoedi, B. (2013) Experimental study of airless spray jet breakup at elevated temperature and pressure. Applied Mechanics and Materials, 393. pp. 711-716.

This list was generated on Sun Dec 1 21:12:36 2024 +08.