Items where Author is "Raza, M.R."

Article

Raza, A. and Ahmad, F. and Badri, T.M. and Raza, M.R. and Malik, K. and Ali, S. (2023) Selection of Materials Based on Thermo-Mechanical Properties of Thermal Barrier Coatings and Their Failures�A Review. Lecture Notes in Mechanical Engineering. pp. 255-264.

Rehman, S. and Ranjha, N.M. and Shoukat, H. and Madni, A. and Ahmad, F. and Raza, M.R. and Jameel, Q.A. and Majeed, A. and Ramzan, N. (2022) Correction to: Fabrication, Evaluation, In Vivo Pharmacokinetic and Toxicological Analysis of pH-Sensitive Eudragit S-100-Coated Hydrogel Beads: a Promising Strategy for Colon Targeting (AAPS PharmSciTech, (2021), 22, 6, (209), 10.1208/s12249-021-02082-y). AAPS PharmSciTech, 23 (4). ISSN 15309932

Ali, S. and Ahmad, F. and Shirazi, M.I. and Malik, K. and Raza, M.R. and Memon, I.R. (2022) Flow induced fiber orientation in short carbon fiber reinforced copper matrix composites. Materials Today Communications, 33.

Raza, A. and Ahmad, F. and Badri, T.M. and Raza, M.R. and Malik, K. (2022) An Influence of Oxygen Flow Rate and Spray Distance on the Porosity of HVOF Coating and Its Effects on Corrosion�A Review. Materials, 15 (18).

Rehman, S. and Madni, A. and Jameel, Q.A. and Usman, F. and Raza, M.R. and Ahmad, F. and Shoukat, H. and Aali, H. and Shafiq, A. (2022) Natural Polymer-Based Graphene Oxide Bio-nanocomposite Hydrogel Beads: Superstructures with Advanced Potentials for Drug Delivery. AAPS PharmSciTech, 23 (8). ISSN 15309932

Ali, S. and Ahmad, F. and Yusoff, P.S.M.M. and Muhamad, N. and Oñate, E. and Raza, M.R. and Malik, K. (2021) A review of graphene reinforced Cu matrix composites for thermal management of smart electronics. Composites Part A: Applied Science and Manufacturing, 144.

Naseer, A. and Ahmad, F. and Aslam, M. and Guan, B.H. and Harun, W.S.W. and Muhamad, N. and Raza, M.R. and German, R.M. (2019) A review of processing techniques for graphene-reinforced metal matrix composites. Materials and Manufacturing Processes, 34 (9). pp. 957-985.

Nazir, M.S. and Ajab, H. and Raza, M.R. and Abdullah, M.A. (2018) Surface modification of cellulose fibers from oil palm empty fruit bunches for heavy metal ion sorption and diesel desulphurization. Desalination and Water Treatment, 107. pp. 241-256.

Nazir, M.S. and Ajab, H. and Raza, M.R. and Abdullah, M.A. (2018) Surface modification of cellulose fibers from oil palm empty fruit bunches for heavy metal ion sorption and diesel desulphurization. Desalination and Water Treatment, 107. pp. 241-256.

Raza, M.R. and Ahmad, F. and Muhamad, N. and Sulong, A.B. and Omar, M.A. and Akhtar, M.N. and Aslam, M. and Sherazi, I. (2017) Effects of debinding and sintering atmosphere on properties and corrosion resistance of powder injection molded 316 L - Stainless steel. Sains Malaysiana, 46 (2). pp. 285-293.

Ullah, S. and Ahmad, F. and Shariff, A.M. and Raza, M.R. and Masset, P.J. (2017) The role of multi-wall carbon nanotubes in char strength of epoxy based intumescent fire retardant coating. Journal of Analytical and Applied Pyrolysis, 124. pp. 149-160.

Abdullah, M.A. and Nazir, M.S. and Raza, M.R. and Wahjoedi, B.A. and Yussof, A.W. (2016) Autoclave and ultra-sonication treatments of oil palm empty fruit bunch fibers for cellulose extraction and its polypropylene composite properties. Journal of Cleaner Production, 126. pp. 686-697.

Aslam, M. and Ahmad, F. and Yusoff, P.S.M.B.M. and Altaf, K. and Omar, M.A. and Abdul Khalil, H.P.S. and Raza, M.R. (2016) Investigation of Rheological Behavior of Low Pressure Injection Molded Stainless Steel Feedstocks. Advances in Materials Science and Engineering, 2016.

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Raza, M.R. (2015) Thermal conductivity of powder injection molded carbon nanotube-reinforced copper-matrix composites. International Journal of Powder Metallurgy, 51 (1). pp. 57-66.

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Megat Yusoff, P.S.M. and Raza, M.R. (2014) Homogeneous distribution of carbon nanotubes in copper matrix nanocomposites fabricated via combined technique. Nanoscience and Nanotechnology Letters, 6 (10). pp. 865-874.

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Raza, M.R. (2013) Fabrication and microstructural analysis of CNTs reinforced copper matrix nanocomposites via MIM technique. Applied Mechanics and Materials, 459. pp. 11-17.

Raza, M.R. and Ahmad, F. and Mamat, O. and Omar, M.A. and German, RM and Muhsan, A.S. (2012) Effects of Sintering Temperature and Cooling Rate on Mechanical Properties of Powder Injection Molded 316L Stainless Steel. Solid State Phenomena, 185. pp. 102-105.

Conference or Workshop Item

Shirazi, I. and Ahmad, F. and Raza, M.R. and Muhsan, A.S. and Aslam, M. (2015) Shear controlled alignment of short carbon fibers in copper matrix composite green samples produced by powder injection molding. In: UNSPECIFIED.

Aslam, M. and Ahmad, F. and Bintimegat Yusoff, P.S.M. and Muhamad, N. and Raza, M.R. and Irfan Shirazi, M. (2014) Effects of admixed titanium on densification of 316L stainless steel powder during sintering. In: UNSPECIFIED.

Muhsan, A.S. and Ahmad, F. and Mohamed, N.M. and Yusoff, P.S.M.M. and Raza, M.R. and Afrooz, I.E. (2014) Experimental preparation and numerical simulation of high thermal conductive Cu/CNTs Nanocomposites. In: UNSPECIFIED.