Items where Author is "Rusli, R."

Tusher, H.M. and Nazir, S. and Mallam, S. and Rusli, R. and Botnmark, A.K. (2022) Learning from accidents: Nontechnical skills deficiency in the European process industry. Process Safety Progress.

Lim, W.K. and Rusli, R. and Nazir, S. (2022) Offshore coxswain competency evaluation model for internal on-board competency monitoring and assessment. Process Safety Progress.

Zainal Abidin, M. and Rusli, R. (2022) Special Issue: International Conference and Exhibition on Loss Prevention Asia 2021 (LPA 2021). Process Safety Progress, 41 (S1). S3.

Idris, A.M. and Rusli, R. and Nasif, M.S. and Ramli, A.F. and Lim, J.S. (2022) A fuzzy multi-objective optimisation model of risk-based gas detector placement methodology for explosion protection in oil and gas facilities. Process Safety and Environmental Protection, 161. pp. 571-582.

Idris, A.M. and Ho, W.S. and Rusli, R. and Ramli, A.F. and Chee, W.C. and Hashim, H. and Muis, Z.A. and Lim, J.S. (2021) Optimal Sizing and Costing of Water-Energy Nexus System. Chemical Engineering Transactions, 89. pp. 583-588.

Halil, N. and Rusli, R. and Zainal Abidin, M. and Jamen, S. and Khan, F. (2021) An integrated health risk assessment with control banding for nanomaterials exposure. Process Safety Progress.

Yang, R. and Khan, F. and Neto, E.T. and Rusli, R. and Ji, J. (2020) Could pool fire alone cause a domino effect? Reliability Engineering and System Safety, 202.

Yang, R. and Khan, F. and Neto, E.T. and Rusli, R. and Ji, J. (2020) Could pool fire alone cause a domino effect? Reliability Engineering and System Safety, 202.

Pham, L.H.H.P. and Rusli, R. and Shariff, A.M. and Khan, F. (2020) Dispersion of carbon dioxide bubble release from shallow subsea carbon dioxide storage to seawater. Continental Shelf Research, 196.

Yaqub, M.W. and Rusli, R. and Pendyala, R. (2020) Experimental study on gas-liquid-liquid three-phase flow patterns and the resultant pressure drop in a horizontal pipe upstream of the 90° bend. Chemical Engineering Science, 226.

Yaqub, M.W. and Marappagounder, R. and Rusli, R. and Reddy Prasad, D.M. and Pendyala, R. (2020) Flow pattern identification and measurement techniques in gas-liquid-liquid three-phase flow: A review. Flow Measurement and Instrumentation, 76.

Idris, A.M. and Rusli, R. and Burok, N.A. and Mohd Nabil, N.H. and Ab Hadi, N.S. and Abdul Karim, A.H.M. and Ramli, A.F. and Mydin, I. (2020) Human factors influencing the reliability of fire and gas detection system. Process Safety Progress, 39 (S1).

Yazdi, M. and Khan, F. and Abbassi, R. and Rusli, R. (2020) Improved DEMATEL methodology for effective safety management decision-making. Safety Science, 127.

Rusli, R. and Zainal Abidin, M. (2020) Inherent safety impact in complying process safety regulations and reducing human error. Elsevier, pp. 73-87.

Tahoon, A.I. and Rusli, R. and Khan, F. and Zainal Abidin, M. (2020) Logic-based probabilistic network model to detect and track faults in a process system. Process Safety Progress, 39 (S1).

Ghosh, A. and Ahmed, S. and Khan, F. and Rusli, R. (2020) Process Safety Assessment Considering Multivariate Non-linear Dependence Among Process Variables. Process Safety and Environmental Protection, 135. pp. 70-80.

Rusli, R. and Nasif, M.S. (2020) Special Issue: International Conference and Exhibition on Loss Prevention Asia 2019, 25-26 November 2019. Process Safety Progress, 39 (S1).

Yaqub, M.W. and Pendyala, R. and Rusli, R. (2019) Oil-water phase inversion in the horizontal section of upstream 90° bend during gas-oil-water three-phase flow. Key Engineering Materials, 796. pp. 137-144.

Zainal Abidin, M. and Rusli, R. and Khan, F. and Mohd Shariff, A. (2018) Development of inherent safety benefits index to analyse the impact of inherent safety implementation. Process Safety and Environmental Protection, 117. pp. 454-472.

Zainal Abidin, M. and Rusli, R. and Khan, F. and Mohd Shariff, A. (2018) Development of inherent safety benefits index to analyse the impact of inherent safety implementation. Process Safety and Environmental Protection, 117. pp. 454-472.

Zainal Abidin, M. and Rusli, R. and Khan, F. and Mohd Shariff, A. (2018) Development of inherent safety benefits index to analyse the impact of inherent safety implementation. Process Safety and Environmental Protection, 117. pp. 454-472.

Zainal Abidin, M. and Rusli, R. and Khan, F. and Mohd Shariff, A. (2018) Development of inherent safety benefits index to analyse the impact of inherent safety implementation. Process Safety and Environmental Protection, 117. pp. 454-472.

Aziz, H.A. and Shariff, A.M. and Rusli, R. (2017) Interrelations between process safety management elements. Process Safety Progress, 36 (1). pp. 74-80.

Shariff, A.M. and Wahab, N.A. and Rusli, R. (2016) Assessing the hazards from a BLEVE and minimizing its impacts using the inherent safety concept. Journal of Loss Prevention in the Process Industries, 41. pp. 303-314.

Shariff, A.M. and Wahab, N.A. and Rusli, R. (2016) Assessing the hazards from a BLEVE and minimizing its impacts using the inherent safety concept. Journal of Loss Prevention in the Process Industries, 41. pp. 303-314.

Zainal Abidin, M. and Rusli, R. and Buang, A. and Mohd Shariff, A. and Khan, F.I. (2016) Resolving inherent safety conflict using quantitative and qualitative technique. Journal of Loss Prevention in the Process Industries, 44. pp. 95-111.

Zainal Abidin, M. and Rusli, R. and Buang, A. and Mohd Shariff, A. and Khan, F.I. (2016) Resolving inherent safety conflict using quantitative and qualitative technique. Journal of Loss Prevention in the Process Industries, 44. pp. 95-111.

Wahab, N.A. and Rusli, R. and Shariff, A.M. and Rashid, E.A. and Ali, M.F.M. (2016) Selection of inherently safer preventive measures to reduce human error. Journal of Loss Prevention in the Process Industries, 41. pp. 323-332.

Wahab, N.A. and Rusli, R. and Shariff, A.M. and Rashid, E.A. and Ali, M.F.M. (2016) Selection of inherently safer preventive measures to reduce human error. Journal of Loss Prevention in the Process Industries, 41. pp. 323-332.

Wahab, N.A. and Rusli, R. and Shariff, A.M. and Rashid, E.A. and Ali, M.F.M. (2016) Selection of inherently safer preventive measures to reduce human error. Journal of Loss Prevention in the Process Industries, 41. pp. 323-332.

Zainal Abidin, M. and Rusli, R. and Mohd Shariff, A. and Khan, F.I. (2016) Three-Stage ISD Matrix (TIM) Tool to Review the Impact of Inherently Safer Design Implementation. Process Safety and Environmental Protection, 99. pp. 30-42.

Zainal Abidin, M. and Rusli, R. and Mohd Shariff, A. and Khan, F.I. (2016) Three-Stage ISD Matrix (TIM) Tool to Review the Impact of Inherently Safer Design Implementation. Process Safety and Environmental Protection, 99. pp. 30-42.

Pham, L.H.H.P. and Rusli, R. (2016) A review of experimental and modelling methods for accidental release behaviour of high-pressurised CO2 pipelines at atmospheric environment. Process Safety and Environmental Protection, 104. pp. 48-84.

Abdul Majid, N.D. and Mohd Shariff, A. and Rusli, R. (2015) Process Safety Management (PSM) for managing contractors in process plant. Journal of Loss Prevention in the Process Industries, 37. pp. 82-90.

Abdul Majid, N.D. and Mohd Shariff, A. and Rusli, R. (2015) Process Safety Management (PSM) for managing contractors in process plant. Journal of Loss Prevention in the Process Industries, 37. pp. 82-90.

Ab Kadir, N.A. and Rusli, R. and Zaina Abidin, N.A. (2014) CFD study on syngas dispersion for biomass process industry. Applied Mechanics and Materials, 625. pp. 410-413.

Pham, H.H.P.L. and Rusli, R. and Abdullah, M.Z. (2014) Consequence study of pressurized CO2 release containing impurities with obstacles. Applied Mechanics and Materials, 625. pp. 474-477.

Abdul Wahab, N. and Rusli, R. and Shariff, A.M. (2014) Evaluation of inherent safety strategies using FAHP to reduce human error. Advanced Materials Research, 917. pp. 332-341.

Aziz, H.A. and Shariff, A.M. and Rusli, R. and Yew, K.H. (2014) Managing process chemicals, technology and equipment information for pilot plant based on Process Safety Management standard. Process Safety and Environmental Protection, 92 (5). pp. 423-429.

Aziz, H.A. and Shariff, A.M. and Rusli, R. (2014) Managing process safety information based on process safety management requirements. Process Safety Progress, 33 (1). pp. 41-48.

Aziz, H.A. and Shariff, A.M. and Rusli, R. (2014) Operational Training Management System (OPTRAMS) for safe operation in process plant. Advanced Materials Research, 917. pp. 325-331.