Items where Author is "Shafiq, N."

Group by: Item Type | No Grouping

Jump to: Article | Book Section | Conference or Workshop Item | Book | Citation Index Journal

Number of items: 212.

Article

Al-Masoodi, A.H.H. and Abbas, Y.M. and Alkhatib, F. and Khan, M.I. and Shafiq, N. and ElGawady, M. (2023) Aerodynamic optimization for corner modification of octagonal-shape tall buildings using computational approach. Journal of Building Engineering, 76. ISSN 23527102

Waqar, A. and Othman, I. and Shafiq, N. and Mansoor, M.S. (2023) Applications of AI in oil and gas projects towards sustainable development: a systematic literature review. Artificial Intelligence Review, 56 (11). pp. 12771-12798. ISSN 02692821

Bheel, N. and Mohammed, B.S. and Ali, M.O.A. and Shafiq, N. and Radu, D. (2023) Effect of graphene oxide as a nanomaterial on the bond behaviour of engineered cementitious composites by applying RSM modelling and optimization. Journal of Materials Research and Technology, 26. pp. 1484-1507. ISSN 22387854

Bheel, N. and Mohammed, B.S. and Ahmed Ali, M.O. and Shafiq, N. and Mohamed Tag-eldin, E. and Ahmad, M. (2023) Effect of polyvinyl alcohol fiber on the mechanical properties and embodied carbon of engineered cementitious composites. Results in Engineering, 20. ISSN 25901230

Khan, M.B. and Shafiq, N. and Waqar, A. and Radu, D. and CismaÈ�, C. and Imran, M. and Almujibah, H. and Benjeddou, O. (2023) Effects of Jute Fiber on Fresh and Hardened Characteristics of Concrete with Environmental Assessment. Buildings, 13 (7). ISSN 20755309

Khan, M.B. and Iqbal Khan, M. and Shafiq, N. and Abbas, Y.M. and Imran, M. and Fares, G. and Khatib, J.M. (2023) Enhancing the mechanical and environmental performance of engineered cementitious composite with metakaolin, silica fume, and graphene nanoplatelets. Construction and Building Materials, 404. ISSN 09500618

Kumar, V. and Kutty, S.R.M. and Abd Razak, S.N. and Shafiq, N. and Adebanjo, A. and Baloo, L. and Azougagh, A.-A. and Iseni, R. (2023) Exploring the untapped potentials of oily sludge ash blended with fly ash for geopolymer binder via waste valorisation approach. Journal of Hazardous Materials Letters, 4. ISSN 26669110

Waqar, A. and Othman, I. and Shafiq, N. and Deifalla, A. and Ragab, A.E. and Khan, M. (2023) Impediments in BIM implementation for the risk management of tall buildings. Results in Engineering, 20. ISSN 25901230

Waqar, A. and Othman, I. and Shafiq, N. and Mateen Khan, A. (2023) Integration of passive RFID for small-scale construction project management. Data and Information Management. ISSN 25439251

Wahab, M.M.A. and Shafiq, N. and Alaloul, W.S. and Rafiq, W. and Husna, N. and Farhan, S.A. and Ikram, T.A. and Musarat, M.A. (2023) Low-Concentration Acid Treatment of Sugarcane Bagasse with Silica Extraction for Partial Cement Replacement. Iranian Journal of Science and Technology - Transactions of Civil Engineering. ISSN 22286160

Al-Aidrous, A.-H.M.H. and Shafiq, N. and Rahmawati, Y. and Mohammed, B.S. and Al-Ashmori, Y.Y. and Baarimah, A.O. and Alawag, A.M. (2023) Major blocking factors affecting the application of industrialized building system. Ain Shams Engineering Journal.

Rafindadi, A.D. and Shafiq, N. and Othman, I. and MikiÄ�, M. (2023) Mechanism Models of the Conventional and Advanced Methods of Construction Safety Training. Is the Traditional Method of Safety Training Sufficient? International Journal of Environmental Research and Public Health, 20 (2).

Tahir, H. and Khan, M.B. and Shafiq, N. and Radu, D. and Nyarko, M.H. and Waqar, A. and Almujibah, H.R. and Benjeddou, O. (2023) Optimisation of Mechanical Characteristics of Alkali-Resistant Glass Fibre Concrete towards Sustainable Construction. Sustainability (Switzerland), 15 (14). ISSN 20711050

Waqar, A. and Othman, I. and Almujibah, H.R. and Sajjad, M. and Deifalla, A. and Shafiq, N. and Azab, M. and Qureshi, A.H. (2023) Overcoming implementation barriers in 3D printing for gaining positive influence considering PEST environment. Ain Shams Engineering Journal.

Bheel, N. and Ali, M.O.A. and Shafiq, N. and Almujibah, H.R. and Awoyera, P. and Benjeddou, O. and Shittu, A. and Olalusi, O.B. (2023) Utilization of millet husk ash as a supplementary cementitious material in eco-friendly concrete: RSM modelling and optimization. Structures, 49. pp. 826-841. ISSN 23520124

Ismail, F.I. and Shafiq, N. and Abbas, Y.M. and Ateya, E.S. and Zahid, M. and Bheel, N. and Benjeddou, O. and Abdulkadir, I. (2023) The behavior of graphene-nanoplatelets-based high-performance concrete under ambient curing. Structures, 47. pp. 694-708.

Mohammed, M. and Shafiq, N. and Abdallah, N.A.W. and Ayoub, M. and Haruna, A. and Ibrahim, M.B. (2022) AL-ACHIEVING SUSTAINABLE WASTE MANAGEMENT AT CONSTRUCTION SITES VIA LIFE-CYCLE OF ENVIRONMENTAL IMPACT ASSESSMENT. Journal of Engineering Science and Technology, 17 (1). pp. 604-619.

Ismail, F.I. and Shafiq, N. and Abbas, Y.M. and Bheel, N. and Benjeddou, O. and Ahmed, M. and Sabri, M.M. and Ateya, E.S. (2022) Behavioral assessment of graphene nanoplatelets reinforced concrete beams by experimental, statistical, and analytical methods. Case Studies in Construction Materials, 17.

Alkhatib, F. and Kasim, N. and Goh, W.I. and Shafiq, N. and Amran, M. and Kotov, E.V. and Albaom, M.A. (2022) Computational Aerodynamic Optimization of Wind-Sensitive Irregular Tall Buildings. Buildings, 12 (7).

Rahman, S.H.A. and Farhan, S.A. and Sazali, Y.A. and Shafiee, L.H. and Husna, N. and Hamid, A.I.A. and Shafiq, N. and Zulkarnain, N.N. and Habarudin, M.F. (2022) Effect of Elastomeric Expandable Additive on Compressive Strength and Linear Expansion of Fly-Ash-Based Strength-Enhanced Geopolymer Cement for Shrinkage-Resistant Oil-Well Cementing. Applied Sciences (Switzerland), 12 (4).

Suppiah, R.R. and Nermoggan, P. and Shafiq, N. (2022) Experimental investigation of the effects of temperature on the morphological characteristics of geopolymer binders. Journal of Petroleum Exploration and Production Technology.

Abd Razak, S.N. and Shafiq, N. and Guillaumat, L. and Farhan, S.A. and Lohana, V.K. (2022) Fire-Exposed Fly-Ash-Based Geopolymer Concrete: Effects of Burning Temperature on Mechanical and Microstructural Properties. Materials, 15 (5).

Mohammed, M. and Shafiq, N. and Al-Mekhlafi, A.-B.A. and Rashed, E.F. and Khalil, M.H. and Zawawi, N.A. and Muhammad, A. and Sadis, A.M. (2022) The Mediating Role of Policy-Related Factors in the Relationship between Practice of Waste Generation and Sustainable Construction Waste Minimisation: PLS-SEM. Sustainability (Switzerland), 14 (2).

Gardezi, S.S.S. and Shafiq, N. and Khan, M.W.A. (2022) Relational pre-impact assessment of conventional housing features and carbon footprint for achieving sustainable built environment. Environment, Development and Sustainability, 24 (6). pp. 8441-8463.

Abdullah, M.J. and Beddu, S. and Manan, T.S.B.A. and Syamsir, A. and Naganathan, S. and Mohd Kamal, N.L. and Mohamad, D. and Itam, Z. and Yee+, H.M. and Mohd Yapandi, M.F.K. and Mohamed Nazri, F. and Shafiq, N. and Isa, M.H. and Ahmad, A. and Wan Rasdi, N. (2022) The Strength and Thermal Properties of Concrete containing Water Absorptive Aggregate from Well-Graded Bottom Ash (BA) as Partial Sand Replacement. Construction and Building Materials, 339.

Dahim, M. and Farhan, S.A. and Shafiq, N. and Al-Mattarneh, H. and Ismail, R. (2022) Thermal-Energy Performance of Bulk Insulation Coupled with High-Albedo Roof Tiles in Urban Pitched Residential Roof Assemblies in the Hot, Humid Climate. Sustainability (Switzerland), 14 (5).

Kamal, N.L.M. and Shafiq, N. and Alaloul, W.S. and Beddu, S. and Abd Manan, T.S.B. (2021) Application of response surface methodology for the optimization of mix design concrete using coal bottom ash as cement replacement material. Lecture Notes in Civil Engineering, 132. pp. 396-404.

Haruna, A. and Shafiq, N. and Montasir, O.A. (2021) Building information modelling application for developing sustainable building (Multi criteria decision making approach). Ain Shams Engineering Journal, 12 (1). pp. 293-302.

Abd Razak, S.N. and Guillaumat, L. and Shafiq, N. (2021) Effect of fire flame exposure on basalt and carbon fiber-reinforced concrete. Lecture Notes in Civil Engineering, 132. pp. 573-579.

Ahmad, S. and Shafiq, N. and Iqbal, H.W. and Ahmad, R.Z. and Abbas, Z. and Rehman, A.-U. and Ali, M. (2021) Effect of slag on chloride resistance of concrete. Lecture Notes in Civil Engineering, 132. pp. 365-374.

Rahman, S.H.A. and Zulkarnain, N.N. and Shafiq, N. (2021) Experimental study and design of experiment using statistical analysis for the development of geopolymer matrix for oil-well cementing for enhancing the integrity. Crystals, 11 (2).

Gardezi, S.S.S. and Shafiq, N. and Hassan, I. and Arshid, M.U. (2021) Life Cycle Carbon Footprint Assessments, Case Study of Malaysian Housing Sector. Environmental and Climate Technologies, 25 (1). pp. 1003-1017.

Jalal, A. and Hakim, L. and Shafiq, N. (2021) Mechanical and post-cracking characteristics of fiber reinforced concrete containing copper-coated steel and PVA fibers in 100 cement and fly ash concrete. Applied Sciences (Switzerland), 11 (3). pp. 1-14.

Ismail, F.I. and Farhan, S.A. and Shafiq, N. and Husna, N. and Sharif, M.T. and Affan, S.U. and Veerasenan, A.K. (2021) Nano-porous silica-aerogel-incorporated composite materials for thermal-energy-efficient pitched roof in the tropical region. Applied Sciences (Switzerland), 11 (13).

Mohammed, B.S. and Shafiq, N. and Kutty, S.R.M. and Mohamad, H. and Balogun, A.-L. (2021) Preface. Lecture Notes in Civil Engineering, 132. v.

Gardezi, S.S.S. and Shafiq, N. (2021) Prospects of a sustainable eol-carbon footprint assessment of a tropical housing habitat. Lecture Notes in Civil Engineering, 132. pp. 545-554.

Gardezi, S.S.S. and Shafiq, N. and Khan, M.W.A. (2021) Relational pre-impact assessment of conventional housing features and carbon footprint for achieving sustainable built environment. Environment, Development and Sustainability.

Umar, U.A. and Shafiq, N. and Ahmad, F.A. (2021) A case study on the effective implementation of the reuse and recycling of construction & demolition waste management practices in Malaysia. Ain Shams Engineering Journal, 12 (1). pp. 283-291.

Shafiq, N. and Ammar, M.A. (2021) An experimental assessment on the performance of fly ash in concrete. Lecture Notes in Civil Engineering, 132. pp. 458-467.

Zahid, M. and Shafiq, N. and Razak, S.N.A. and Tufail, R.F. (2020) Investigating the effects of NaOH molarity and the geometry of PVA fibers on the post-cracking and the fracture behavior of engineered geopolymer composite. Construction and Building Materials, 265. (Submitted)

Haruna, A. and Shafiq, N. and Ali, M.O. and Mohammed, M. and Haruna, S. (2020) Design and construction technique for low embodied energy building: An analytical network process approach. Journal of Engineering and Technological Sciences, 52 (2). pp. 166-180.

Adamu, M. and Mohammed, B.S. and Shafiq, N. and Liew, M.S. (2020) Durability performance of high volume fly ash roller compacted concrete pavement containing crumb rubber and nano silica. International Journal of Pavement Engineering, 21 (12). pp. 1437-1444.

Hamid, M.S.A. and Shafiq, N. and Kiwan, O. (2020) Establishing the correlations for eco-efficiency index of various types of structural concrete used in the malaysian housing using response surface method. Applied Sciences (Switzerland), 10 (12).

Jani, N.M. and Nasif, M.S. and Shafiq, N. and Holt, I. (2020) Experimental investigation on the effect of varying fiber mix proportion on the mechanical and thermal performances of fiber-reinforced self-compacting concrete under hydrocarbon fire condition. Applied Sciences (Switzerland), 10 (13).

Khan, S.U. and Ayub, T. and Shafiq, N. (2020) Physical and Mechanical Properties of Concrete with Locally Produced Metakaolin and Micro-silica as Supplementary Cementitious Material. Iranian Journal of Science and Technology - Transactions of Civil Engineering, 44 (4). pp. 1199-1207.

Azmee, N.M. and Shafiq, N. (2020) Preparation of low cement ultra-high performance concrete. Lecture Notes in Civil Engineering, 54. pp. 331-336.

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2018) Abrasion Resistance of Nano Silica Modified Roller Compacted Rubbercrete: Cantabro Loss Method and Response Surface Methodology Approach. IOP Conference Series: Earth and Environmental Science, 140 (1).

Adamu, M. and Mohammed, B.S. and Shafiq, N. and Shahir Liew, M. (2018) Effect of crumb rubber and nano silica on the fatigue performance of roller compacted concrete pavement. Cogent Engineering, 5 (1).

Othman, I. and Shafiq, N. and Nuruddin, M.F. (2018) Effective Safety Management in Construction Project. IOP Conference Series: Materials Science and Engineering, 291 (1).

Fazli, H. and Mohd Yassin, A.Y. and Shafiq, N. and Teo, W. (2018) Effective bond length of CFRP sheets externally bonded to concrete beams under marine environment. Construction and Building Materials, 167. pp. 726-738.

Ayub, T. and Khan, S.U. and Shafiq, N. (2018) Flexural modelling and finite element analysis of frc beams reinforced with PVA and basalt fibres and their validation. Advances in Civil Engineering, 2018.

Zahid, M. and Shafiq, N. and Jalal, A. (2018) Investigating the effects of solarcure curing method on the compressive strength, microstructure and polymeric reaction of fly ash based geopolymer. Construction and Building Materials, 181. pp. 227-237.

Fazli, H. and Yassin, A.Y.M. and Shafiq, N. and Teo, W. (2018) Pull-off testing as an interfacial bond strength assessment of CFRP-concrete interface exposed to a marine environment. International Journal of Adhesion and Adhesives, 84. pp. 335-342.

Othman, I. and Shafiq, N. and Nuruddin, M.F. (2018) Quality planning in Construction Project. IOP Conference Series: Materials Science and Engineering, 291 (1).

Shafiq, N. and Gardezi, S.S.S. and Nuruddin, M.F. and Abdullah Zawawi, N.A.W. (2018) Recurrent carbon footprint assessment and forecasting for conventional housing in tropical regions: A Malaysian case study. Environmental Progress and Sustainable Energy, 37 (2). pp. 839-849.

Adamu, M. and Mohammed, B.S. and Shafiq, N. and Shahir Liew, M. (2018) Skid Resistance of nano silica modified roller compacted rubbercrete for pavement applications: Experimental methods and response surface methodology. Cogent Engineering, 5 (1).

Zahid, M. and Shafiq, N. and Isa, M.H. and Gil, L. (2018) Statistical modeling and mix design optimization of fly ash based engineered geopolymer composite using response surface methodology. Journal of Cleaner Production, 194. pp. 483-498.

Othman, I. and Shafiq, N. and Nuruddin, M.F. (2018) Time Overrun in Construction Project. IOP Conference Series: Materials Science and Engineering, 291 (1).

Kusbiantoro, A. and Embong, R. and Shafiq, N. (2017) Adaptation of eco-friendly approach in the production of soluble pozzolanic material. International Journal of Design and Nature and Ecodynamics, 12 (2). pp. 246-253.

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2017) Effect of Mineral Filler type on Strength of Roller Compacted Rubbercrete for Pavement Applications. IOP Conference Series: Materials Science and Engineering, 201 (1).

Zahid, M. and Shafiq, N. and Nuruddin, M.F. and Nikbakht, E. and Jalal, A. (2017) Effect of partial replacement of fly ash by metakaolin on strength development of fly ash based geopolymer mortar. Key Engineering Materials, 744. pp. 131-135.

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2017) Effect of polycarboxylate superplasticizer dosage on the mechanical performance of roller compacted Rubbercrete for pavement applications. Journal of Engineering and Applied Sciences, 12 (20). pp. 5253-5260.

Shafiq, N. and Nuruddin, M.F. (2017) Effectiveness of adhesive bonding in structural steel connections. Proceedings of the 10th International Conference on Inspection, Appraisal, Repairs and Maintenance of Structures. pp. 345-351.

Mohammed, B.S. and Adamu, M. and Shafiq, N. (2017) Establishing relationship between modulus of elasticity and strength of nano silica modified roller compacted rubbercrete. International Journal of GEOMATE, 13 (39). pp. 103-110.

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2017) Evaluating the effect of superplasticizer on the properties of roller compacted concrete using response surface methodology. ARPN Journal of Engineering and Applied Sciences, 12 (21). pp. 6206-6215.

Kumar, R. and Mohd Yaseen, A.Y.B. and Shafiq, N. and Jalal, A. (2017) Influence of metakaolin, fly ash and nano silica on mechanical and durability properties of concrete. Key Engineering Materials, 744. pp. 8-14.

Mahmoud, L. and Shafiq, N. and Fadhil, M. and Thanoon, W. (2017) Interaction between CFRP side plated to R C beams and concrete under shear action. Proceedings of the 5th International Specialty Conference on Fibre Reinforced Materials. pp. 143-151.

Adamu, M. and Mohammed, B.S. and Shafiq, N. (2017) Mechanical performance of roller compacted rubbercrete with different mineral filler. Jurnal Teknologi, 79 (6). pp. 75-88.

Jalal, A. and Shafiq, N. and Nikbakht, E. and Kumar, R. and Zahid, M. (2017) Mechanical properties of hybrid basalt-polyvinyl alcohol (PVA) fiber reinforced concrete. Key Engineering Materials, 744. pp. 3-7.

Yahya, A.A. and Ali, N. and Mohd Kamal, N.L. and Shahidan, S. and Beddu, S. and Nuruddin, M.F. and Shafiq, N. (2017) Reducing Heavy Metal Element from Coal Bottom Ash by Using Citric Acid Leaching Treatment. MATEC Web of Conferences, 103.

Mohd Jani, N. and Shakir Nasif, M. and Shafiq, N. and Pao, W. (2017) Thermal and strength performance of reinforced self-compacting concrete slabs mixed with basalt and PVA fibers in high intensity fire. MATEC Web of Conferences, 131.

Muhd, F.N. and Amir, F. and Mohamed, M.A.W. and Shafiq, N. and Malkawi, A.B. (2017) Utilization of eafd in concrete composite. Materials Science Forum, 894 MS. pp. 72-75.

Fazli, H. and Yassin, A.Y.M. and Shafiq, N. and Wee, T. (2017) The behavior of Carbon Fiber Reinforced Polymer (CFRP) strengthened beams under a marine environment. International Journal of GEOMATE, 13 (39). pp. 179-184.

Umar, U.A. and Shafiq, N. and Malakahmad, A. and Nuruddin, M.F. and Farhan, S.A. and Salihi, I.U. (2016) Application of structural building information modeling (S-BIM) for sustainable buildings design and waste reduction: A review. International Journal of Applied Engineering Research, 11 (2). pp. 1523-1532.

Chin, S.C. and Shafiq, N. and Nuruddin, M.F. (2016) Behaviour of RC beams with CFRP-strengthened openings. Structural Concrete, 17 (1). pp. 32-43.

Ayub, T. and Shafiq, N. and Khan, S.U. (2016) Compressive stress-strain behavior of HSFRC reinforced with basalt fibers. Journal of Materials in Civil Engineering, 28 (4).

Embong, R. and Shafiq, N. and Kusbiantoro, A. and Nuruddin, M.F. (2016) Effectiveness of low-concentration acid and solar drying as pre-treatment features for producing pozzolanic sugarcane bagasse ash. Journal of Cleaner Production, 112. pp. 953-962.

Umar, U.A. and Shafiq, N. and Malakahmad, A. and Nuruddin, M.F. and Khamidi, M.F. and Salihi, I.U. (2016) Impact of construction waste minimization at construction site: Case study. Jurnal Teknologi, 78 (5-3). pp. 33-40.

Shafiq, N. and Ayub, T. and Khan, S.U. (2016) Investigating the performance of PVA and basalt fibre reinforced beams subjected to flexural action. Composite Structures, 153. pp. 30-41.

Setvati, M.R. and Mustaffa, Z. and Isnadi, B. and Shafiq, N. and Syed, Z.I. and Kim, D.K. (2016) Meso-scale numerical study of composite patch repaired hole drilled steel plate. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1724-1728.

Embong, R. and Shafiq, N. and Kusbiantoro, A. (2016) Silica extraction and incineration process of sugarcane bagasse ash (SCBA) as pozzolanic materials: A review. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 7304-7308.

Embong, R. and Kusbiantoro, A. and Shafiq, N. and Nuruddin, M.F. (2016) Strength and microstructural properties of fly ash based geopolymer concrete containing high-calcium and water-absorptive aggregate. Journal of Cleaner Production, 112. pp. 816-822.

Gardezi, S.S.S. and Shafiq, N. and Zawawi, N.A.W.A. and Khamidi, M.F. and Farhan, S.A. (2016) A multivariable regression tool for embodied carbon footprint prediction in housing habitat. Habitat International, 53. pp. 292-300.

Umar, U.A. and Shafiq, N. and Malakahmad, A. and Nuruddin, M.F. and Khamidi, M.F. and Farhan, S.A. and Gardezi, S.S.S. (2015) 4D BIM application in AEC industry: Impact on integrated project delivery. Research Journal of Applied Sciences, Engineering and Technology, 10 (5). pp. 547-552.

Shafiq, N. and Nuruddin, M.F. and Khan, S.U. and Ayub, T. (2015) Calcined kaolin as cement replacing material and its use in high strength concrete. Construction and Building Materials, 81. pp. 313-323.

Shafiq, N. and Nurrudin, M.F. and Gardezi, S.S.S. and Kamaruzzaman, A.B. (2015) Carbon footprint assessment of a typical low rise office building in Malaysia using building information modelling (BIM). International Journal of Sustainable Building Technology and Urban Development, 6 (3). pp. 157-172.

Chin, S.C. and Shafiq, N. and Nuruddin, M.F. (2015) FRP as strengthening material for Reinforced Concrete beams with openings â�� A review. KSCE Journal of Civil Engineering, 19 (1). pp. 213-219.

Nuruddin, M.F. and Memon, F.A. and Demie, S. and Shafiq, N. (2015) Influence of water-to-geopolymer solids ratio and curing time on the properties of self-compacting geopolymer concrete. Malaysian Construction Research Journal, 13 (2). pp. 29-38.

Gardezi, S.S.S. and Shafiq, N. and Abdullah, N.A.W. and Khamidi, M.F. and Farhan, S.A. (2015) Minimization of embodied carbon footprint from housing sector of Malaysia. Chemical Engineering Transactions, 45. pp. 1927-1932.

Shafiq, N. and Nuruddin, M.F. and Safdar Gardezi, S.S. and Farhan, S.A. and Al Rawy, H.A.M. (2015) Reduction of embodied CO2 emissions from conventional single storey house in malaysia by recycled materials using building information modeling (BIM). Advances in Environmental Biology, 9 (1). pp. 17-21.

Nuruddin, M.F. and Ullah Khan, S. and Shafiq, N. and Ayub, T. (2015) Strength prediction models for PVA fiber-reinforced high-strength concrete. Journal of Materials in Civil Engineering, 27 (12).

Ayub, T. and Shafiq, N. and Nuruddin, M.F. (2014) Effect of chopped basalt fibers on the mechanical properties and microstructure of high performance fiber reinforced concrete. Advances in Materials Science and Engineering, 2014.

Gardezi, S.S.S. and Shafiq, N. and Zawawi, N.A.W.A. and Farhan, S.A. (2014) Embodied carbon potential of conventional construction materials used in typical malaysian single storey low cost house using building information modeling (BIM). Advanced Materials Research, 1043. pp. 242-246.

Ahyudanari, E. and Shafiq, N. and Kamaruddin, I. (2014) Identification and modelling process of defining temperature gradient in airport pavement. Aviation, 18 (2). pp. 72-79.

Chin, S.C. and Shafiq, N. and Kusbiantoro, A. and Nuruddin, M.F. (2014) Reinforced concrete deep beams with openings strengthened using FRP â�� A review. Advanced Materials Research, 1025-1. pp. 938-943.

Ayub, T. and Shafiq, N. and Fadhil Nuruddin, M. (2014) Stress-strain response of high strength concrete and application of the existing models. Research Journal of Applied Sciences, Engineering and Technology, 8 (10). pp. 1174-1190.

Demie, S and Nuruddin, F and Shafiq, N. (2013) Effects of micro-structure characteristics of interfacial transition zone on the compressive strength of self-compacting geopolymer concrete. Construction and Building Materials, 41. pp. 91-98. ISSN 0950-0618

Choo, C.-S. and Shafiq, N. and Nuruddin, F.M. (2013) Effects of large openings in the shear zone of reinforced concrete beams. Malaysian Construction Research Journal, 13 (2). pp. 15-27.

Kusbiantoro, A. and Nuruddin, F and Shafiq, N. and Qazi, Sobia (2012) The effect of microwave incinerated rice husk ash on the compressive and bond strength of fly ash based geopolymer concrete. Construction and Building Materials, 36. pp. 695-703. ISSN 0950-0618

Shafiq, N. and Nuruddin, F (2012) The effect of microwave incinerated rice husk ash on the compressive and bond strength of fly ash based geopolymer concrete. Construction and Building Materials.

Nuruddin, F and Memon, F.A. and Khan, S and Shafiq, N. and Ayub, T (2012) Effect of salient parameters on fresh properties and compressive strength of self-compacting geopolymer concrete. Effect of salient parameters on fresh properties and compressive strength of selfcompacting geopolymer concrete. (Submitted)

Nuruddin, F and Qazi, Sobia and Kusbiantoro, A. and Shafiq, N. (2011) Utilisation of waste material in geopolymeric concrete. Proceedings of the ICE - Construction Materials, 164 (Issue 6). pp. 315-327. ISSN 1747-650X

Shafiq, N. and Nuruddin, F (2010) Degree of hydration and compressive strength of conditioned samples made of normal and blended cement system. Concrete Research Letter.

Shafiq, N. and Nuruddin, F (2010) Moisture equilibrium, degree of hydration and compressive strength of different cement pastes. Concrete research letters, 1 (3). pp. 81-89. (In Press)

Shafiq, N. and Nuruddin, F (2010) Degree of hydration of OPC and OPC/Fly ash paste samples conditioned at different relative humidity. International journal of sustainable construction Engineering and Technology, 1. ISSN 2180-3242

Shafiq, N. (2010) Prioritizing the pipeline maintenance approach using Analytical Hierarchical Process. International review of mechanical engineering. (In Press)

Shafiq, N. (2010) Prioritizing the pipeline maintenance approach using Analytical Hierarchical Process. International Review of Mechanical Engineers. pp. 346-352. ISSN 1970-8734

Kusbiantoro, A. and Nuruddin, F and Qazi, Sobia and Shafiq, N. (2010) The Effect of Sugar Based Retarder on Geopolymer Concrete in Different Curing Conditions. Malaysian Construction Research Journal, 7 (2). pp. 39-46. ISSN 1985-3807

Mahhoud, L and Shafiq, N. and Nuruddin, F (2009) Fatigue behaviour of CFRP concrete joints under shear. Structures and Building.

Nuruddin, F and Kusbiantoro, A. and Qazi, Sobia and Shafiq, N. (2009) INTERFACIAL TRANSITION ZONE CHARACTERISTIC OF POLYMERIC CONCRETE. Platform. pp. 36-41. ISSN 1511-6794

Shafiq, N. and Nuruddin, F and Kamaruddin,, I (2007) Comparison of engineering and durability properties of fly ash blended cement concrete made in UK and Malaysia. Advances in Applied Ceramics.

Shafiq, N. (2006) Calculation of the coefficients of oxygen permeability of mortar samples using PORECOR analysis. Structural Concrete.

Shafiq, N. (2004) Effects of fly ash on chloride migration in concrete and calculation of cover depth required against the corrosion of embedded steel reinforcement. Structural Concrete.

Wan Abdullah Zawawi, Noor Amila and Shafiq, N. and Kamaruddin,, I (2003) Application of Dry Walls in Residential Houses: A buildable system. Platform, 3 (1). pp. 51-55. ISSN 1511-6794

Shafiq, N. (2003) Effects of initial curing condition on the fluid transport properties in OPC and fly ash blended cement concrete. Cement & Concrete Composites.

Book Section

Shafiq, N. (2011) Concrete Part-2: Method of specifying and guidance. In: Revision of Malaysia Standard MS 523 Part 2. SIRIM BERHAD, Malaysia.

Conference or Workshop Item

Rafindadi, A.D. and Othman, I. and Shafiq, N. and Alarifi, H. and Wanees, A.A. and Ibrahim, A. (2023) Strategies for enhancing the use of Building Information Modelling (BIM) in the construction industry. In: UNSPECIFIED.

Al-Masoodi, A.H.H. and Alkhatib, F.H. and Shafiq, N. and Wahab, M.M.A. (2022) The Aerodynamic Performance of Tall Buildings by Utilizing Aerodynamic Modifications - A Review Study. In: UNSPECIFIED.

Husna, N. and Farhan, S.A. and Wahab, M.M.A. and Shafiq, N. and Sharif, M.T. and Razak, S.N.A. and Ismail, F.I. (2021) Building-Information-Modelling-Based Thermal-Energy Performance Evaluation of Silica-Aerogel-Incorporated Rigid Board Roof Insulation Material for Residential Buildings in the Tropical Climate of Malaysia. In: UNSPECIFIED.

Husna, N. and Farhan, S.A. and Wahab, M.M.A. and Wahab, M.M.A. and Shafiq, N. and Sharif, M.T. and Razak, S.N.A. and Ismail, I.F. (2021) Effect of Granular Silica Aerogel as Filler on Tensile and Flexural Strengths and Moduli of Stone-Wool-Fibre-Reinforced Composite as Rigid Board Roof Insulation Material. In: UNSPECIFIED.

Razak, S.N.A. and Shafiq, N. and Guillaumat, L. and Wahab, M.M.A. and Farhan, S.A. and Husna, N. and Ismail, F.I. (2021) Effect of Heating Duration at High Temperature on the Strength and Integrity of Fly Ash-Based Geopolymer Concrete. In: UNSPECIFIED.

Razak, S.N.A. and Shafiq, N. and Guillaumat, L. and Wahab, M.M.A. and Farhan, S.A. and Husna, N. and Ismail, F.I. (2021) Fire Performance of Fly Ash-Based Geopolymer Concrete: Effect of Burning Temperature. In: UNSPECIFIED.

Mohd, S.S.R. and Liew, M.S. and Zawaw, N.A.W.A. and Farhan, S.A. and Shafiq, N. (2021) Green-Building-Index-Assessment-Criteria-Based Comparative Evaluation of Interlocking Blocks as an Alternative to Conventional Masonry for Residential Buildings in Malaysia. In: UNSPECIFIED.

Ismail, F.I. and Farhan, S.A. and Husna, N. and Shafiq, N. and Wahab, M.M.A. and Razak, S.N.A. (2021) Influence of Graphene Nanoplatelets on the Compressive and Split Tensile Strengths of Geopolymer Concrete. In: UNSPECIFIED.

Al-Aidrous, A.-H.M.H. and Shafiq, N. and Mohammed, B.S. and Al-Ashmori, Y.Y. and Baarimah, A.O. and Al-Masoodi, A.H.H. (2021) Investigation of the current Innovative Industrialized Building Systems (IBS) in Malaysia. In: UNSPECIFIED.

Farhan, S.A. and Shafiq, N. and Husna, N. and Zain-Ahmed, A. and Wahab, M.M.A. and Razak, S.N.A. and Ismail, F.I. (2021) Thermal-Energy Performance of High-Albedo Roof Tiles and Bulk Rafter Insulation in Residential Roof in the Tropical Climate. In: UNSPECIFIED.

Saad, S. and Alaloul, W.S. and Shafiq, N. and Ammad, S. and Qureshi, A.H. and Mohammed, A.A.M. (2021) Visually Programming Automated Slab Positioning Tool (ASPT) using Evolutionary Solvers. In: UNSPECIFIED.

Al-Masoodi, A.H.H. and Alkhatib, F.H. and Shafiq, N. and Al-Aidrous, A.-H.M.H. (2021) A review of the Sustainability and Parametric Design Approach of Complex Tall Buildings at an Early Design Stage. In: UNSPECIFIED.

Hamid, M.S.A. and Shafiq, N. and Musir, A.A. and Rosseli, S.R. (2019) Classification of reinforced concrete single story and double story house using eco-efficiency index approach. In: UNSPECIFIED.

Hamid, M.S.A. and Jasni, O.O. and Shafiq, N. (2019) Eco-efficiency index analysis of single story structure of reinforced concrete house using economical and environmental score approach. In: UNSPECIFIED.

Mohammed, B.S. and Nuruddin, M.F. and Shafiq, N. (2016) Development of high strength nano-silica modified rubbercrete. In: UNSPECIFIED.

Hussein, A.A.E. and Shafiq, N. and Nuruddin, M.F. (2015) Compressive strength and interfacial transition zone of sugar cane bagasse ash concrete: A comparison to the established pozzolans. In: UNSPECIFIED.

Shafiq, N. and Fadhilnuruddin, M. and Elshekh, A.E.A. and Fathi, A. (2015) Correlation between compressive strength and ultrasonic pulse velocity of high strength concrete incorporating chopped basalt fibre. In: UNSPECIFIED.

Khan, S.U. and Shafiq, N. and Ayub, T. (2015) Microstructure characteristics of concrete incorporating metakaolin and PVA fibers and influence on the compressive strength. In: UNSPECIFIED.

Hammad, D.B. and Shafiq, N. and Nuruddin, M.F. and Sodangi, M. and Ahmed, U.A. (2014) Criticality analysis of defects in civil engineering structures: Case of onshore process plant. In: UNSPECIFIED.

Hammad, D.B. and Shafiq, N. and Nuruddin, M.F. (2014) Criticality index of building systems using multi-criteria decision analysis technique. In: UNSPECIFIED.

Ayub, T. and Shafiq, N. and Nuruddin, M.F. (2014) Mechanical properties of high-performance concrete reinforced with basalt fibers. In: UNSPECIFIED.

Setvati, M.R. and Shafiq, N. and Mustaffa, Z. and Syed, Z.I. (2014) A review on composite materials for offshore structures. In: UNSPECIFIED.

Demie, S and Nuruddin, F and Memon, F.A. and Shafiq, N. (2011) Effects of Curing Temperature and Superplasticizer on Workability and Compressive Strength of Self- Compacting Geopolymer Concrete. In: National Postgraduate Conference 2011 (NPC 2011), 19-20 Sept 2011, Universiti Teknologi PETRONAS, Tronoh, Perak, MALAYSIA.

Chin, S.C. and Shafiq, N. and Nuruddin, F (2011) CFRP COMPOSITES FOR STRENGTHENING RC BEAMS WITH LARGE SQUARE OPENING AT SHEAR: FEM & EXPERIMENTAL. In: 7th International Conference on Steel & Aluminium Structures, 13th –15th July 2011, Kuching, Sarawak, Malaysia.

Demie, S and Nuruddin, F and Shafiq, N. and Memon, F.A. (2011) Effects of Superplasticizer dosage and Molarity of Alkaline solution on Workability and Compressive Strength of Self-Compacting Geopolymer Concrete. In: United Kingdom - Malaysia-Ireland Engineering Science Conference 2011 (UMIES 2011), 12-14 July, 2011, Kuala Lumpur.

Chin, S.C. and Shafiq, N. and Nuruddin, F (2011) Optimum Strengthening of R/C Beams with Large Opening at Shear using CFRP Laminates. In: United Kingdom - Malaysia Ireland Engineering Science Conference 2011 (UMIES 2011), 12-14 July, 2011, Kuala Lumpur.

Chin, S.C. and Shafiq, N. and Nuruddin, F (2011) FINITE ELEMENT MODELLING OF RC BEAMS WITH LARGE OPENING AT CRITICAL FLEXURE AND SHEAR STRENGTHENED WITH CFRP LAMINATES. In: INTERNATIONAL BUILDING AND INFRASTRUCTURE TECHNOLOGY CONFERENCE 2011, June 7-8 2011, VISTANA HOTEL PENANG.

Shafiq, N. and Nuruddin, F (2010) Chloride ion migration in concrete using electrical method by applying current at different voltages. In: International Conference on Sustainable Building and Infrastructure (ICSBI 2010), 15-17 June 2010, Kuala Lumpur Convention Centre.

Nuruddin, F and Shafiq, N. and Beddu, Salmia (2010) Effects of Used Engine Oil on MIRHA Concrete. In: International Conference on Sustainable Building and Infrastructure (ICSBI 2010), 15-17 June 2010, Kuala Lumpur Convention Centre.

Shafiq, N. (2010) Chloride ion migration in concrete using electrical method by applying current at different voltages. In: ICSBI 2010.

Nuruddin, F and Kusbiantoro, Andri and Qazi, Sobia and Shafiq, N. (2010) The Effect of Natural Retarder On Fly Ash Based Geopolymer Concrete. In: International Conference on Sustainable Building and Infrastructure (ICSBI 2010), 15-17 June 2010, Kuala Lumpur Convention Centre.

Nuruddin, F and Qazi, Sobia and Shafiq, N. and Kusbiantoro, A. (2010) Polymeric Concrete: Complete Elimination of Cement for Sustainable Futures. In: International Conference on Sustainable Building and Infrastructure (ICSBI 2010), 15-17 June 2010, Kuala Lumpur Convention Centre.

Shafiq, N. (2010) Shear-moment interaction of CFRP strengthened concrete elements under monotonic and cyclic loads. In: 4th IMS conference Sharjah UAE.

Chin, S.C. and Shafiq, N. and Nuruddin, F (2010) Structural Performance of Reinforced Concrete Beams Containing Used Engine Oil. In: International Conference on Sustainable Building and Infrastructure (ICSBI 2010), 15-17 June 2010, Kuala Lumpur Convention Centre.

Montasir,, O.A.A. and Kurian, V.J. and Shafiq, N. (2009) Numerical and model test results for truss spar platform subjected to random waves. In: 2nd International Conference on Engineering Technology, 8-10 December 2009, Kuala Lumpur.

Shafiq, N. and Nuruddin, F (2009) EFFICIENCY OF USING EXTERNALLY BONDED CFRP LAMINATES UNDER SHEAR-MOMENT INTERACTION CONDITIONS. In: 9th Internatinal Symposium on FRPRCS, Sydney Australia.

Nuruddin, F and Shafiq, N. and Kamal, N.L.M (2009) THE EFFECTS OF TYPES OF RICE HUSK ASH ON THE POROSITY OF CONCRETE. In: Joint Conferences APSEC - EACEF 2009, 04-06 August 2009, Awana Porto Malai, Langkawi, Malaysia.

Kamal, N.L.M and Nuruddin, F and Shafiq, N. (2009) INTERFACIAL BOND STRENGTH: INFLUENCE OF MICROWAVE INCINERATED RICE HUSK ASH(MIRHA). In: 10th International Conference On Concrete Engineering And Technology 2009, 2-4 March 2009, Intekma Resort & Convention Centre Shah Alam, Malaysia.

Nuruddin, F and Qazi, Sobia and Shafiq, N. and Kusbiantoro, A. (2009) MIX DESIGN OF POLYMERIC CONCRETE INCORPORATING FLY ASH, RICE HUSK ASH AND SILICA FUME. In: The 3rd International Conference on Built Environment in Developing Countries, 2009, Universiti Sains Malaysia, Penang, Malaysia.

Shafiq, N. and Khamidi, M. Faris (2009) PERFORMING SENSITIVITY ANALYSIS OF PIPELINE RISK FAILURE USING ANALYTICAL HIERARCHY PROCESS. In: Asian and Pacific Coasts Singapore-2009, December 2009, Singapore.

Shafiq, N. and Nuruddin, F (2008) HARSH-concrete. In: INNOVA 2008, Brussels, Belgium.

Shafiq, N. and Nuruddin, F (2008) ULUBE-concrete. In: INNOVA 2008 Brussels Belgium, November 2008, Brussels, Belgium.

Beddu, Salmia and Nuruddin, F and Shafiq, N. (2008) Effects of used Engine Oil as Chemical Admixtures on the Properties of High Strength Concrete. In: International Conference on Construction and Building Technology (ICCBT2008), 16-20 June, 2008, Kuala Lumpur.

Kamal, N.L.M and Nuruddin, F and Shafiq, N. (2008) The Influence Of Burning Temperatures and Percentage Inclusion of Microwave Incinerated Rice Husk Ash (MIRHA) On Normal Strength Concrete. In: International Conference on Construction and Building Technologies, 16-20 Jun 2008, Grand Season Hotel, Kuala Lumpur.

Mahmoud, L. and Shafiq, N. and Nuruddin, F and Thanoon, W. (2008) Interaction Between CFRP Laminates and R.C Element subjected to Cyclic Shear Loading. In: International Conference on Construction and Building Technology (ICCBT2008), 16-20 June, 2008, Kuala Lumpur.

Nuruddin, F and Shafiq, N. and Kamal, N.L.M (2008) Microwave Incinerated Rice Husk Ash(MIRHA) Concrete: A New Material In The Construction Industry. In: UK Malaysia Engineering Conference 2008, 14-15 July 2008, Universiti College London, London.

Wan Abdullah Zawawi, Noor Amila and Shafiq, N. and Kamaruddin,, I (2003) Application of Dry Walls in Residential Houses: A buildable system. In: Fifth Asia-Pacific Structural Engineering & Construction Conference, 26-28 August 2003, Johor Bahru, Johor.

Wan Abdullah Zawawi, Noor Amila and Shafiq, N. and Kamaruddin,, I (2003) Coefficient of Oxygen Permeability and Diffusion of OPC and Fly Ash Blended Concrete: Effects of Porosity and Degree of Saturation. In: Fifth Asia-Pacific Structural Engineering and Construction Conference (APSEC2003), Johor Bahru, Johor.

Book

Chandrasekaran, S. and Jain, A.K. and Shafiq, N. and Wahab, M.M.A. (2021) Design Aids for Offshore Topside Platforms Under Special Loads. CRC Press, pp. 1-310.

Citation Index Journal

Chin, S.C. and Shafiq, N. and Kusbiantoro, A. and Nuruddin, F (2014) Reinforced Concrete Deep Beams with Openings Strengthened Using FRP – A Review. [Citation Index Journal]

Chin, S.C. and Shafiq, N. and Nuruddin, F (2014) FRP as strengthening material for Reinforced Concrete beams with openings — A review. [Citation Index Journal]

Hammad, Dabo B. and Shafiq, N. and Nuruddin, F and Sodangi, Mahmoud and Ahmed, Umar Abdullahi (2014) Criticality Analysis of Defects in Civil Engineering Structures: Case of Onshore Process Plant. [Citation Index Journal]

Ayub, T and Shafiq, N. and Nuruddin, F (2014) Mechanical Properties of High-performance Concrete Reinforced with Basalt Fibers. [Citation Index Journal]

Shafiq, N. and Nuruddin, F (2013) Mechanical properties of High Strength Concrete using fly ash. [Citation Index Journal]

Shafiq, N. and Nuruddin, F (2013) STUDY THE EFFECTIVENESS OF THE DIFFERENT POZZOLANIC MATERIAL ON SELF-COMPACTING CONCRETE. [Citation Index Journal]

Shafiq, N. and Nuruddin, F (2013) Effect of sodium hydroxide concentration on fresh properties and compressive strength of self-compacting geopolymer concrete. [Citation Index Journal]

Memon, F.A. and Nuruddin, F and Shafiq, N. (2013) Effect of silica fume on the fresh and hardened properties of fly ash-based self-compacting geopolymer concrete. [Citation Index Journal]

Nuruddin, F and Shafiq, N. (2013) Effects of micro-structure characteristics of interfacial transition zone on the compressive strength of self-compacting geopolymer concrete. [Citation Index Journal]

Shafiq, N. and Nuruddin, F and Chin, S.C. (2012) Durability Study Partially Saturated Fly Ash Blended Cement Concrete. [Citation Index Journal]

Memon, F.A. and Nuruddin, F and Demie, S and Shafiq, N. (2012) Effect of Superplasticizer and Extra Water on Workability and Compressive Strength of Self-Compacting Geopolymer Concrete. [Citation Index Journal]

Chin, S.C. and Shafiq, N. and Nuruddin, F (2012) Effects of used Engine Oil in Reinforced Concrete Beams: The Structural Behaviour. [Citation Index Journal]

Chin, S.C. and Shafiq, N. and Nuruddin, F (2012) Strengthening of RC Beams with Large Openings in Shear by CFRP Laminates: 2D Nonlinear FE Analysis. [Citation Index Journal]

Shafiq, N. (2011) Degree of hydration and compressive strength of conditioned samples made of normal and blended cement system. [Citation Index Journal]

Nuruddin, F and Kusbiantoro, A. and Qazi, Sobia and Shafiq, N. (2011) Compressive Strength and Interfacial Transition Zone Characteristic of Geopolymer Concrete with Different Cast In-Situ Curing Conditions. [Citation Index Journal]

Memon, F.A. and Nuruddin, F and Shafiq, N. (2011) Compressive Strength and Workability Characteristics of Low-Calcium Fly ash-based Self-Compacting Geopolymer Concrete. [Citation Index Journal]

Memon, F.A. and Nuruddin, F and Demie, S and Shafiq, N. (2011) Effect of Curing Conditions on Strength of Fly ash-based Self-Compacting Geopolymer Concrete. [Citation Index Journal]

Nuruddin, F and Demie, S and Memon, F.A. and Shafiq, N. (2011) Effect of Superplasticizer and NaOH Molarity on Workability, Compressive Strength and Microstructure Properties of Self-Compacting Geopolymer Concrete. [Citation Index Journal]

Nuruddin, F and Demie, S and Shafiq, N. (2011) Effect of mix composition on workability and compressive strength of self-compacting geopolymer concrete. [Citation Index Journal]

Shafiq, N. and Nuruddin, F and Qazi, Sobia (2010) Compressive Strength & Microstructure of Polymeric Concrete Incorporating Fly Ash & Silica Fume. [Citation Index Journal]

Nuruddin, F and Shafiq, N. and Qazi, Sobia (2010) Compressive Strength & Microstructure of Polymeric Concrete Incorporating Fly Ash & Silica Fume. [Citation Index Journal]

Shafiq, N. and Nuruddin, F (2010) Degree of hydration and compressive strength of conditioned samples made of normal and blended cement system. [Citation Index Journal]

Shafiq, N. and Nuruddin, F (2010) Degree of hydration of OPC and OPC/FA paste samples. [Citation Index Journal]

Shafiq, N. and Nuruddin, F and W.A., Thanoon (2009) Shear-moment interaction of CFRP strengthened concrete elements under monotonic and cyclic loads. [Citation Index Journal]

This list was generated on Sun Dec 1 19:57:50 2024 +08.