Items where Author is "Sutanto, M.H."

Group by: Item Type | No Grouping
Number of items: 54.

Santhanasamy, R. and Sutanto, M.H. (2023) A Comparative Study on the Physical and Rheological Properties of 60/70 and 80/100 Penetration Grade Bitumen in Malaysia. Journal of Mechanical Engineering, 20 (1). pp. 217-231.

Yaro, N.S.A. and Sutanto, M.H. and Baloo, L. and Habib, N.Z. and Usman, A. and Yousafzai, A.K. and Ahmad, A. and Birniwa, A.H. and Jagaba, A.H. and Noor, A. (2023) A Comprehensive Overview of the Utilization of Recycled Waste Materials and Technologies in Asphalt Pavements: Towards Environmental and Sustainable Low-Carbon Roads. Processes, 11 (7). ISSN 22279717

Khan, M.I. and Sutanto, M.H. and Khahro, S.H. and Zoorob, S.E. and Md. Yusoff, N.I. and Al-Sabaeei, A.M. and Javed, Y. (2023) Fatigue Prediction Model and Stiffness Modulus for Semi-Flexible Pavement Surfacing Using Irradiated Waste Polyethylene Terephthalate-Based Cement Grouts. Coatings, 13 (1). ISSN 20796412

Ahmad, A. and Sutanto, M.H. and Ahmad, N.R. and Mohamad, M.E. and Bujang, M. (2023) Microstructural Characterization of Fibric Peat Stabilized with Portland Cement and Silica Fume. Materials, 16 (1).

Ahmad, A. and Sutanto, M.H. and Ahmad, N.R. and Mohamad, M.E. and Bujang, M. (2023) Microstructural Characterization of Fibric Peat Stabilized with Portland Cement and Silica Fume. Materials, 16 (1).

Memon, A.M. and Sutanto, M.H. and Yusoff, N.I.M. and Memon, R.A. and Khan, M.I. and Al-Sabaeei, A.M. (2023) Rheological modeling and microstructural evaluation of oily sludge modified bitumen. Case Studies in Construction Materials, 18. ISSN 22145095

Rahmad, S. and Khahro, S.H. and Rosyidi, S.A.P. and Widyatmoko, I. and Memon, N.A. and Al-Sabaeei, A.M. and Milad, A. and Sutanto, M.H. and Yusoff, N.I.M. (2022) Assessment of metal leaching from rediset-polymer modified asphalt binder on groundwater and soil contamination. Case Studies in Construction Materials, 16.

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Muhammad, A. (2022) Comparison of Response Surface Methodology and Artificial Neural Network approach in predicting the performance and properties of palm oil clinker fine modified asphalt mixtures. Construction and Building Materials, 324.

Khan, M.I. and Sutanto, M.H. and Khan, K. and Iqbal, M. and Napiah, M.B. and Zoorob, S.E. and Klemeš, J.J. and Bokhari, A. and Rafiq, W. (2022) Effective use of recycled waste PET in cementitious grouts for developing sustainable semi-flexible pavement surfacing using artificial neural network (ANN). Journal of Cleaner Production, 340.

Usman, A. and Sutanto, M.H. and Napiah, M. and Zoorob, S.E. and Yaro, N.S.A. (2022) Evaluation of optimum asphalt content and engineering properties of asphalt mixture containing irradiated waste plastic bottles granules as aggregates. In: UNSPECIFIED.

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Al-Sabaeei, A.M. and Rafiq, W. (2022) Feasibility Evaluation of Waste Palm Oil Clinker Powder as a Fillers Substitute for Eco-Friendly Hot Mix Asphalt Pavement. International Journal of Pavement Research and Technology. ISSN 19966814

Yaro, N.S.A. and Napiah, M. and Sutanto, M.H. and Usman, A. and Jagaba, A.H. and Mani, A.U. and Ahmad, A. (2022) Geopolymer utilization in the pavement industry - An overview. In: UNSPECIFIED.

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Zoorob, S.E. and Usman, A. (2022) Influence of nanosilica particles on the high-temperature performance of waste denim fibre-modified bitumen. International Journal of Pavement Engineering, 23 (2). pp. 207-220.

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Al-Sabaeei, A.M. and Rafiq, W. (2022) Mixture Design-Based Performance Optimization via Response Surface Methodology and Moisture Durability Study for Palm Oil Clinker Fine Modified Bitumen Asphalt Mixtures. International Journal of Pavement Research and Technology.

Yaro, N.S.A. and Sutanto, M.H. and Habib, N.Z. and Napiah, M. and Usman, A. and Al-Sabaeei, A.M. and Rafiq, W. (2022) Mixture Design-Based Performance Optimization via Response Surface Methodology and Moisture Durability Study for Palm Oil Clinker Fine Modified Bitumen Asphalt Mixtures. International Journal of Pavement Research and Technology. ISSN 19966814

Mohamad, M.E. and Ahmad, A. and Sadon, H.B. and Sutanto, M.H. and Bujang, M. and Kifli, A.B.Z. and Mohamad, S.N.A. (2022) Peat Stabilization Using Waste Crumb Rubber Tire. Civil Engineering and Architecture, 10 (7). pp. 3253-3263.

Babashamsi, P. and Khahro, S.H. and Omar, H.A. and Al-Sabaeei, A.M. and Memon, A.M. and Milad, A. and Khan, M.I. and Sutanto, M.H. and Yusoff, N.I.M. (2022) Perspective of Life-Cycle Cost Analysis and Risk Assessment for Airport Pavement in Delaying Preventive Maintenance. Sustainability (Switzerland), 14 (5).

Usman, A. and Sutanto, M.H. and Napiah, M. and Al-Sabaeei, A.M. and Yaro, N.S.A. and Kumalasari, I. and Saeed, S.M. (2022) Waste Polyethylene Terephthalate granules modified by gamma irradiation and their effect as fine aggregates on moisture damage of asphalt mixtures. In: UNSPECIFIED.

Solikin, M. and Falah, M.F. and Sunarjono, S. and Hidayati, N. and Trinugroho, S. and Sutanto, M.H. and Asnan, M.N. (2021) Bending Performance of Half-Slab Styrofoam Mortar with Glazed Nylon Fiber. Civil and Environmental Engineering, 17 (1). pp. 50-57.

Khan, M.I. and Sutanto, M.H. and Napiah, M.B. and Khan, K. and Rafiq, W. (2021) Design optimization and statistical modeling of cementitious grout containing irradiated plastic waste and silica fume using response surface methodology. Construction and Building Materials, 271.

Yaro, N.S.A. and Napiah, M.B. and Sutanto, M.H. and Usman, A. and Murana, A.A. and Rafiq, W. (2021) Effect of Palm Oil Clinker Powder-Based Geopolymer on Bitumen and Asphalt Mixture Properties. In: UNSPECIFIED.

Khan, M.I. and Wen, L.S. and Sutanto, M.H. and Napiah, M.B. and Zoorob, S.E. (2021) Effect of cement grouts containing irradiated polyethylene terephthalate on properties of semi-flexible mixtures. Key Engineering Materials, 888 KE. pp. 3-8.

Mizwar, I.K. and Napiah, M. and Sutanto, M.H. (2021) Effect of phase change material on rheological properties of asphalt mastic. Lecture Notes in Civil Engineering, 132. pp. 836-843.

Memon, A.M. and Sutanto, M.H. and Napiah, M. and Wong, F. and Bujang, M. (2021) Effects of bitumen modification on pavement performance subjected to high vehicular speed and extreme temperature conditions: A review. Lecture Notes in Civil Engineering, 132. pp. 1044-1051.

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Yusoff, N.I.M. and Khairuddin, F.H. and Memon, A.M. (2021) Evaluation of the high-temperature rheological performance of tire pyrolysis oil-modified bio-asphalt. International Journal of Pavement Engineering.

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Yusoff, N.I.M. and Khairuddin, F.H. and Memon, A.M. (2021) Evaluation of the high-temperature rheological performance of tire pyrolysis oil-modified bio-asphalt. International Journal of Pavement Engineering.

Yaro, N.S.A. and Napiah, M. and Sutanto, M.H. and Usman, A. and Saeed, S.M. and Kaura, J.M. (2021) Influence of modification mixing parameters on conventional properties of palm oil clinker fine (POCF)-modified bitumen. In: UNSPECIFIED.

Heng, K.K. and Khan, M.I. and Sutanto, M.H. and Zoorob, S.E. and Sunarjono, S. (2021) Investigating Mechanical Properties of Interlocking Concrete Blocks by Recycling Waste Polyethylene Terephthalate-A Sustainable Approach. In: UNSPECIFIED.

Usman, A. and Sutanto, M.H. and Napiah, M. and Zoorob, S.E. and Abdulrahman, S. and Saeed, S.M. (2021) Irradiated polyethylene terephthalate fiber and binder contents optimization for fiber-reinforced asphalt mix using response surface methodology. Ain Shams Engineering Journal, 12 (1). pp. 271-282.

Rafiq, W. and Napiah, M. and Habib, N.Z. and Sutanto, M.H. and Alaloul, W.S. and Khan, M.I. and Musarat, M.A. and Memon, A.M. (2021) Modeling and design optimization of reclaimed asphalt pavement containing crude palm oil using response surface methodology. Construction and Building Materials, 291.

Yaro, N.S.A. and Napiah, M.B. and Sutanto, M.H. and Usman, A. and Saeed, S.M. (2021) Modeling and optimization of mixing parameters using response surface methodology and characterization of palm oil clinker fine modified bitumen. Construction and Building Materials, 298.

Yaro, N.S.A. and Bin Napiah, M. and Sutanto, M.H. and Usman, A. and Saeed, S.M. (2021) Performance evaluation of waste palm oil fiber reinforced stone matrix asphalt mixtures using traditional and sequential mixing processes. Case Studies in Construction Materials, 15.

Memon, A.M. and Sutanto, M.H. and Napiah, M. and Yusoff, N.I.M. and Memon, R.A. and Al-Sabaeei, A.M. and Ali, M. (2021) Physicochemical, rheological and morphological properties of bitumen incorporating petroleum sludge. Construction and Building Materials, 297.

Ahmad, A. and Sutanto, M.H. and Al-Bared, M.A.M. and Harahap, I.S.H. and Abad, S.V.A.N.K. and Khan, M.A. (2021) Physio-Chemical Properties, Consolidation, and Stabilization of Tropical Peat Soil Using Traditional Soil Additives � A State of the Art Literature Review. KSCE Journal of Civil Engineering.

Ahmad, A. and Sutanto, M.H. and Al-Bared, M.A.M. and Harahap, I.S.H. and Abad, S.V.A.N.K. and Khan, M.A. (2021) Physio-Chemical Properties, Consolidation, and Stabilization of Tropical Peat Soil Using Traditional Soil Additives � A State of the Art Literature Review. KSCE Journal of Civil Engineering, 25 (10). pp. 3662-3678.

Saeed, S.M. and Sutanto, M.H. and Napiah, M. and Wong, F. and Bujang, M. (2021) Review on the effect of curing on cold recycled asphalt mixture. Lecture Notes in Civil Engineering, 132. pp. 1052-1060.

Mizwar, I.K. and Napiah, M. and Sutanto, M.H. and Habib, N.Z. and Thanapal, P. and Qin, Y. (2021) Rutting Prevention of Bituminous Mastic Using Microencapsulation Phase Change Material. Journal of Materials in Civil Engineering, 33 (12).

Yaro, N.S.A. and Napiah, M. and Sutanto, M.H. and Hainin, M.R. and Usman, A. and Rafindadi, A.D. and Abdulrahman, S. and Saeed, S.M. (2021) Utilization of Palm Oil Mill Residue as Sustainable Pavement Materials: A Review. International Journal of Integrated Engineering, 13 (3). pp. 66-78.

Yaro, N.S.A. and Napiah, M. and Sutanto, M.H. and Hainin, M.R. and Usman, A. and Rafindadi, A.D. and Abdulrahman, S. and Saeed, S.M. (2021) Utilization of Palm Oil Mill Residue as Sustainable Pavement Materials: A Review. International Journal of Integrated Engineering, 13 (3). pp. 66-78.

Ahmad, A. and Sutanto, M.H. and Ahmad, N.R.B. and Bujang, M. and Mohamad, M.E. (2021) The implementation of industrial byproduct in malaysian peat improvement: A sustainable soil stabilization approach. Materials, 14 (23).

Ahmad, A. and Sutanto, M.H. and Ahmad, N.R.B. and Bujang, M. and Mohamad, M.E. (2021) The implementation of industrial byproduct in malaysian peat improvement: A sustainable soil stabilization approach. Materials, 14 (23).

Al-Sabaeei, A.M. and Mustofa, B.A. and Sutanto, M.H. and Sunarjono, S. and Bala, N. (2020) Aging and rheological properties of latex and crumb rubber modified bitumen using dynamic shear rheometer. Journal of Engineering and Technological Sciences, 52 (3). pp. 385-398.

Siswanto, H. and Supriyanto, B. and Pranoto and Sutanto, M.H. (2020) Constructing a strategy to improve indonesian regency road performance using balanced scorecard. International Journal of GEOMATE, 18 (69). pp. 248-253.

Ahmad, A. and Sutanto, M.H. and Harahap, I.S.H. and Al-Bared, M.A.M. and Khan, M.A. (2020) Feasibility of Demolished Concrete and Scraped Tires in Peat Stabilization - A Review on the Sustainable approach in Stabilization. In: UNSPECIFIED.

Ahmad, A. and Sutanto, M.H. and Harahap, I.S.H. and Al-Bared, M.A.M. and Khan, M.A. (2020) Feasibility of Demolished Concrete and Scraped Tires in Peat Stabilization - A Review on the Sustainable approach in Stabilization. In: UNSPECIFIED.

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Zoorob, S.E. and Usman, A. (2020) Influence of nanosilica particles on the high-temperature performance of waste denim fibre-modified bitumen. International Journal of Pavement Engineering.

Rafiq, W. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Zabri, Z.N.B. and Khan, M.I. and Musarat, M.A. (2020) Investigation on hamburg wheel-tracking device stripping performance properties of recycled hot-mix asphalt mixtures. Materials, 13 (21). pp. 1-15.

Khan, M.I. and Sutanto, M.H. and Napiah, M.B. and Zoorob, S.E. and Yusoff, N.I.M. and Usman, A. and Memon, A.M. (2020) Irradiated polyethylene terephthalate and fly ash based grouts for semi-flexible pavement: design and optimisation using response surface methodology. International Journal of Pavement Engineering.

Rafiq, W. and Humair, M. and Napiah, M.B. and Sutanto, M.H. and Musarat, M.A. and Memon, A.M. (2020) Performance Evaluation of Rutting and Moisture Damage containing Warm Mix Asphalt Mixtures with Recycled Asphalt pavement. In: UNSPECIFIED.

Al-Sabaeei, A.M. and Napiah, M.B. and Sutanto, M.H. and Alaloul, W.S. and Usman, A. (2020) A systematic review of bio-asphalt for flexible pavement applications: Coherent taxonomy, motivations, challenges and future directions. Journal of Cleaner Production, 249.

Khan, M.I. and Huat, H.Y. and bin Muhamad Dun, M.H. and Sutanto, M.H. and Jarghouyeh, E.N. and Zoorob, S.E. (2019) Effect of irradiated and non-irradiated waste PET based cementitious grouts on flexural strength of semi-flexible pavement. Materials, 12 (24).

Usman, A. and Izzaty, N. and Ibrahim, R. and Sutanto, M.H. and Sunarjono, S. (2019) Storage stability and morphology of latex modified bitumen. International Journal of Innovative Technology and Exploring Engineering, 9 (1). pp. 4435-4440.

Mizwar, I.K. and Napiah, M. and Sutanto, M.H. (2019) Thermal properties of cool asphalt concrete containing phase change material. In: UNSPECIFIED.

Mizwar, I.K. and Napiah, M. and Sutanto, M.H. (2019) Thermal properties of cool asphalt concrete containing phase change material. In: UNSPECIFIED.

This list was generated on Wed Dec 4 13:16:29 2024 +08.